Error with Valuation Category in Accounting 1 Tab of Material Master

Dear All,
I have created plant and also activated the "Split Activation" for that plant through SPRO-MM-Valuation & A/c Assignment ---Split valuation.
But when i Extend the material form another plant the "Valuation Category" field in Accounting 1 Tab of Material Master becomes INACTIVE (i.e. it becomes gray). Where as for the plant (from which i am copying the material) the same field is ACTIVE.
Please suggest me what might be the error.
I have checked the setting for both the plants i.e. in which it is working and the other where it is not working. The settings are same.
Please help.
Thanks in advance.

Hi Shailendra
If this is for a single material.
I hope u r using MM01 only by giving reference of existing mat., in this case, at this stage only you have to maintain Valuation Category.
Once the material is created, the field will become gray.
This is what I know. If still, there is any way to make this field active, if u come to know, please let me know too.

Similar Messages

Inventory problem for material with valuation category X

Hi!
During annual inventory, I found material in a storage location that doesn't exist in SAP as material master.
I have created the material, managed in batches and valuation category X.
I have created a batch with MSC1N and now I am trying to create an inventory document to put this material on stock; but when I am trying to create the inventory document with MI01 or MI31, the system is telling me :
"Batch 0000043183 does not contain a valuation type
Message no. M7045
Diagnosis
The material is subject to split valuation, but the batch entered has not been assigned to a valuation type.
System Response
Any transaction/event that has the effect of changing the stock balance will be rejected for this batch.
Procedure
Contact your system administrator.
If you are authorized to do so, do you wish to check the valuation category in the material master record?
Do you want to display the batch?"
Now, I don't know exactly what can I do to be able to create the inventory document.
Any ideas.....
Thanks

Since you have created a material master with valuation category that means the system is taking that material either as split valuated or to-be split valuated...the reason of this error you will find out if you go to MSC2N with material-batch & plant you will find in the Basic data 1 tab that Valuation type field is mandatory...so either you have to split valuate the item further and then enter the same valuation type in MSC2N or otherwise if you not still done any transaction with the material master then remove the valuation category from the material master
Regards,
Indranil

Extend Material to another plant with Valuation CAtegory X

Hi All,
I have a Material in Plant 1, with Valuation Category H.
I want to extend this material to Plant 2 with Valuation Category 'X' (Auto Batch)
Its not accepting X, any other entry would be possible
It says "With Single batch valuation, batch management must be defined. The following plants have no batch management requirement: Plant 1"
If i activate batch management in Plant 2, it is working.....but i dont want Batch management for this material.
How do i solve this.
Pls help.
Thanks

Hi,
We can not remove Batch management thru MM02, once it is set in MM01. Its a gray field.
can any one let me know whats the reason for not accepting valuation category x while extending the material?

Foreign Trade Import/Export Tab in Material Master of SAP R/3

Hi
What is the use of Foreign Trade Import/Export Tab in material master of SAP R/3

Hi Akhil ..
Sounds like you need to enrol for the SAP Foreign Trade training course!
The tab holds various attributes for determining Foreign Trade data - for example the Customs classification and Country of Origin. Those data are used to determine and/or populate fields in the Foreign Trade data when processing MM and SD documents.
Some, but not all, of the fields in that tab become redundant if GTS is in use.
If you have more specific questions in this area, it might be easier to give better explanations.
Regards,
Dave

Raw materials with valuation category are appearing as a missing parts

Hi All,
I am converting planned order to production order which is having ten raw materials. Some of them are having valuation category u2018Ru2019. All raw materials are in stock. While procuring raw materials which are having valuation category, we used valuation type u2018RM-OKu2019 so they are having stock with valuation type (RM-OK).
Raw materials which are having valuation category maintained are always coming as a missing part while converting planned order to production order though they are in stock.
So, pls do comment where I am doing mistake.

Hi,
1. I dont think that the Valuation class and the availability check has any relations ship.
2. Also in your querry you are mentioning about valuation class and valuation category .. what is this valuation category and where is it mentioned.
3. Also check if all the stocks are posted in same storage location
reg
dsk

Split valuation-Price control with valuation category

Hi,
While creating halb material with valuation catergory Y,System select price control V,
I wish,it should be S, as after cost run value updated with standard price.
Regards,
Devendra

Hi,
I am not sure about moving thread to other forum since I don't find any such option in our purview. You can check the option to contact moderator who has right to do the same.
Also you can try with creating new thread in MM forum and close this thread here in PP forum thereby you can avoid duplication.
Regards,
Tejas

Costing Issue-Previous Price changes in Accounting 1 tab in Material Master

Hi SAP Experts,
Our Client has an issue with "previous price" field under the "Accounting 1" tab in Mateial master .The issue is that client never did costing to this material XXXXXXwith plant XXXX. But system is showing value in the "previous price" field. We have checked whether previious cost estimate exists. There was no previous cost estimate and still the system updated "previous price" field.
Can anyone let me know in which cases the system updates "Previous Price" field in Material Master ?
Your help is highly appreciated.
Kind Regards,
K.S.K

Hi
May be this material was created with reference to the same material in other plant or with ref to some other material or may be costing run was deleted from CKR1
br, Ajay M

Problem with Accounting view in Material Master

Hi,
One of the material master does not have the accounting view and the costing views attached to it. When trying to extend the views thru MM01, the system shows the following message -
Material already maintained for this Transaction/event
What we understood is that the views were already extended earlier but still does not show up.
Any help extended is highly appreciated.
Regards,
Mike
Edited by: Michael Gerard Leo on Mar 10, 2009 4:35 PM

Hi,
After we extended the accounting view in MM01 for a particular plant and saved it, we are not able to view it through MM02 or MM03.
Again, if we try to extend the view for the same plant in MM01, the system gives an error message that it is already extended.
Any reasons why the accounting views are not showing up in MM02 and MM03.
Regards,
Mike

Error in Account Assignment from Material Master to Sale Invoice.

Dear Gurus,
Pls guide me to resolve this problem:
When i am generating Sales Invoice through vf01, system taking Material Assignment Group as 04, but in material Master assignment Group is 03. Due to this system unable to post accounting document.
Every time user changing that material assignment group through VF02 and saving to post account document ( after changing system posting FI doc).
How system take Material Assignment Group in Sale Invoice. Till now i am checking only Material master. Wht are the other parameters to define Material Assignment group in Sales invoice. <b>This is happending to particular one material only</b>
Pls guide me.
Regards,
Venkat

Hi
While you define account assignment in TCode VKOA, you have a provision for defining the gl accounts in the combination of the following:
1. Cust.Grp/MaterialGrp/AcctKey
2. Cust.Grp/Account Key
3. Material Grp/Acct Key
4. General
5. Acct Key
When you save an invoice it searches in the above order to find a GL account.
May be your setting would have been done only in 1st or 3rd ie., assining the GL account in the combination of Cust.Grp/MaterialGrp/AcctKey and GL Account. Hence if the combination doesn't, it would not generate the accounting document.
If your business process agrees you can define gl account in Account key (4) or General (5) also, by which it would generate an accounting document even if it finds a wrong material group.
Regards,
Suraj

Interface RW - error can be related to MRP field in Material master

Hello,
Can an error in the area of invoices not being processed in Accounting (with an error message talking about interface RW) can be related to changed made to the material master of the product, in the MRP type changed from ND (No planning) to PD (MRP) ?
Thanks for your thoughts on this
KR - Loï

Hi Loic,
i have the same issue right now:
System error: Inconsistency between Credit/debit indicator and amounts
Message no. F5693
Diagnosis
When the FI/CO interface data was projected into the FI document, not all the amounts are positive. This is due to an inconsistency between the credit/debit indicator and the amount information in the FI/CO interface.
System Response
Negative amounts cannot be processed by the financial accounting application.
Procedure
This is a system error. Contact the SAP Hotline service.
thing is that last friday this was working good, i have post several GR last friday and there was no issue then.. how did you solved this?
thanks in advance

LSMW-Error during processing of BDC session change to material master MM02

I have created an LSMW for changing material master data. I recorded MM02 and using the "select views" screen selected the accounting 2 view and entered the information in the fields on that screen requiring changes. I've set up all of the technical screens for the LSMW. However, when I process the BDC session with "display errors only", the program stops at the select view screen with an error message "Select at least one view". Any ideas how I can process through this screen so that the Accounting 2 screen opens in the BDC session? One further note, I set that selection as a constant in the field mapping and conversion rules screen. The field name recorded as KZSEL_05.

hi
one question how did you choose the view? i mean to ask by scrolling down using mouse or page down.
the scrolling by mouse is not recognized by recording and that may be the error. so whenever you have to go down in screen please use page down not scrolling at least in LSMW.

Period change is not appearing in accounting view of material master

Hello SAP lovers
As we know once we close the period with MMPV, Latest perion appeared in material master --> Accounting view.
Now period open is March 2007 for a company code. It is expected that material created in all the plants assigned to same company code should display latest period in accounting view. This is happening for all thousands of material in system but i found 1 material which is displaying the period as Nov 2006.
I have doubled check that this material is created for the same plant which is assgned to the company code for which Mar2007 is open....
Anybody ......Any clue......
Best Regards
Avinash

Hello Mani
I have already checked all the open items.....
No sale order. No entry in table MSEG.
Only one PO without GR.....So that should not make any difference.
Br
Avinash

Query Related to Addition Of Customer Specific Tab in Material Master

Hi Experts,
we had a requirement from our client to add certain specific fields in Material Master. we added all those fields in a "User Tab" created by copying "Basic Data Tab" & it's attributes in SPRO. After this was done the transaction was running fine but when we want to migrate to another tab say "Basic Data Tab" we are not able to do so as we are still on the same User Tab.
Please help me on this <removed by moderator>.
<removed by moderator>
Thanks & Regards
Priyesh Shah
Edited by: Thomas Zloch on Jun 29, 2011 11:06 PM - urgency reduced, please do not offer ...

Thanks for your reply.
I would like to know am using strategy 52 for this FG, so that i can have option to procure order specific components after sales order arrival, and components which are not specific to the order can be procured before sales order arrival. Where am confused is if am planning with FG1 i.e. am entering PIR for FG1 and am procuring order independent components before sales order arrival and suppose if the sales order arrives for FG2 for which components i have procured before sales order arrival is same but the remaining components which are order specific are different from that of FG1, then how the MRP shall behave. How the requirement for the FG2 shall be met. Kindly throw some light on this scenario.
Expecting a positive and prompt response.
Regards,
J K Tharwani

Adding a subscreen in Plant data/stor. 1u0094 tab in Material master

Hi All,
I need to add a subscreen in material master Plant data/stor. 1 tab. Please let me know if its posible.
Warehouse management requires a primary bin and 4 alternative bin locations to be added to the material master. Four custom fields will be added in addition to the standard primary storage bin location field. These fields will be held at the branch/storage location level.
For this I enhanced MARD table with a structure contains 4 fields.
A sub-screen should be added to the Plant data/stor. 1 tab. Alternative Bin Information section should hold the additional four fields.
I want to add a sun screen under General data. This sub screen contains 4 fields for alternative storage bins.
Regards,
Venkat.

Hi,
Hi,
u'll have to do the following:
1. copy the std func group MGD1 to ZMGD1....include all ur custom screen and make sure u hav written the PBO and PAI .
Best way would be copy any standard screen and then making any change there like modifying the label.
2. next step is copying the screen sequence ( logistics-material master-configuring the material master)....01 to z1 and then assigninng all ur new program and screen name in this custom screen seq ...
and u can assign this custom screen seq to diff material type....
there is a bit of SPRO involved in this...
and check the BADI BADI_MATERIAL_REF.
<b>REWARD POINTS</b>
rEGARDS

Account Assignment from Material Master or Goods Receipt Document..

We are on ECC 6.0 instance.
For Vendor Cash Discounts we have all the postings going to a default cost center set up as the default account assignment in the cost element master. Because of the default cost center, the postings are going to the profit center on the default cost center. But the segment getting populated at the line item level is not in line with the segment on the default PC.
This segment is actually the one which is in line with the Profit center in the account assignment on Goods Receipt/Material document or the PC on the Material Master.
Can someone please clarify where this segment would be coming from - from the material master or from the good receipt aka material document?
Edited by: Pete on Jul 22, 2009 3:51 PM

Hi,
In material master you have assigned a profit center and all good movements will post to profit center,which is assigned to materials.in profit center you have assigned a SEGMENT.so automatically all profit center postings will post to SEGMENT.
Hope this helps you.
Thanks,
Anusha

Error with Valuation Category in Accounting 1 Tab of Material Master

Similar Messages

Maybe you are looking for