ERS PO DELETION

DEAR ALL,
I AM UNABLE TO DELETE THE ERS ACTIVATED PO. IT IS SHOWING THE SATDARD SAP ERROR MESSAGE ME867 AND MEPO000. I CREATED THE PO WITH ACTIVATING ERS AND GR-BASED IV. AFTER THAT I DID GRN . ONCE I REVERSE GRN AND TRIED TO DELETE THE PO IT IS SHOWING THIS ERROR MESSAGE THAT HEADER IS FAULY. I EVEN TRIED DEACTIVATING ERS AND TRIED TO DELEATE . BUT IT IS SHOWING THE SAME ERROR. HENCE REQUESTING YOU TO SUGGEST THE SOLUTION FOR THIS.
THANKS AND REGARDS
NAAGSEKHAR

Hi,
It is a new functionality added by note 1130944. This error message ME867 is hard coded .The new functionality requires table EKRS to be first cleared for theitem. Please run transaction MRRL for that case.
Please read the note 1294454:
Note 1130944 added a check for values in table EKRS and blocked deletion
of the item if values existed. This note has been removed from the
standard code and a pilot note 1291964 created for customers wanting
this functionality.
This note 1294454 is needed to delete the check for EKRS in releases
between the insertion and removal of the code in the various support
packs.
Regards,
Edit

Similar Messages

Unable to delete file on the remote host

Hi,
I tried to delete a file on the remote host using File.delete method as well as using Runtime.getRuntime.exec("del filename")
But both of them failed to work. First one returned false, but the second one is throwing IOException always.
I am trying this through a java application in Windows NT environment. I am using jdk1.3. How can i solve this problem?.
IOException occured at DataLoadFromTxtToOra exeBatchForTWS: CreateProcess: del \\ERSWEB\DTemp\ERS\HEB_428\DATAFILES\ERSWEB\DLCOMMA.txt error=2
Regards,
Babu

you should be able to do that if you have rights on the file, try the following code and substitute the computer/share names:
               File aFile = new File("\\\\COMPUTER\\share\\filename.ext");
               System.out.println("Read: " + aFile.canRead());
               System.out.println("Write: " + aFile.canWrite());
               System.out.println("Exists: " + aFile.exists());
               System.out.println("File: " + aFile.isFile());
               aFile.delete();Mind the slashes: a single backslash is causing a escape character: \n for example is a (unix) return. A double \\ defeats it and results in a single \ in the filename
If everything returns true I think the file will be deleted. If isFile() returns false you've got the path/filename wrong.

Error message when trying to delete an item in a purchase order

Hi,
We are trying to delete an item in a PO, but when we select the item and click on the trash button (Delete), we get the following error message:
«Evaluated receipt settlement open, deletion not possible
Message no. ME867»
There was a good receipt that was originally done for this PO. We cancelled it with the opposite posting (debit GR/IR account and credit the project account using t-code MIGO.) The account assignment category of this PO is «Project».
Thanks for you help.
Julien

Hi,
This means ERS is active in your system.
What this means is that when you do a GRN, an ERS flag is activated in the PO header. The ERS is then settled using the PO data in SRM.
If you have not settled this (at least this is what is indicated from the message), then uncheck this flag in the PO header and then try and archive.
Cheers.

Cancellation of parked ERS invoice

Hi Gurus,
How will I cancel Parked invoices of ERS?
Thanks,
Kumar

Dear,
For cancel park invoice use MIR4 t-code.
Enter MIR4 t-code, enter your invoice number and click on Edit button. click on Display/Change button.
Then click on Invoice Document tab at header level and click on delete option.
Regards,
Mahesh Wagh

GOA distribution to R3 - Tax Code for ERS vendors

Hi all,
Having an issue with GOA distribution to R3 for evaluated receipt settlement vendors. For ERS vendors, tax code is a required field. There is not a tax code field in the GOA and this is not being passed in any iDoc segment I can find. My current tax configuration is calculate tax in backend, i have maintained tax codes I0.U1, I1 with U1 set as default. As shopping carts are transferred from R3 they are assigned U1 as expected and PO's generated in the BE from these external requirements are getting the U1 as expected. The problem is with contracts and scheduling agreements. Everything is fine unless the vendor has the ERS indicator set. Tax code becomes a required field.
Has anyone else experienced this? I've' researched SDN and everything talks about shopping carts and PO's, which is working for us. I cant find any info on the contract distribution. I've investigated the BADI's associated with tax calculation in SRM but I'm not sure these meet the requirement for ERS vendors.
Am I missing configuration? Is one of the tax badi's the way to go? Any information is appreciated.
SRM SERVER 550
R3 46c
Classic - Plan-Driven Procurement
Thanks,
Justin

Hi
Please refer to few OSS notes.
Note 1033458 - Item level Tolerance values in GOA not transferred to R/3
1012486 Important Information on upgrading ERP-Systems in HA-Setups
1014820 Indicators reset in Active versions when line item added
1029026 Prob in conf. create-Diff in ERS flag for SRM and R/3 vendor
849567 Output Control for ERS Invoice in Program BBPERS
703876 Release note SRM Server 5.0 SP00
762984 SRM40-SUS: Implementation of customer enhancement fields
1010791 Flag Confirmation based Invoice Verification set erroneous
1018855 Vendor flag POR expected is not replicated from backend
Note 967107 - New logic for grouping backend contracts out of a GOA
909516 SRM40/CTR:New line itm distribution flag cannot be unchecked
1025863 Wrong Currency code during GOA replication to R/3
1009872 Contracts : GOA Distribution value divided by 100
908058 CheckMan errors - Attachment Original transfer for Contracts
940632 Distribution incorrect-When invalid Purchasing Org entered
942008 SRM Distribution of GOA to R/3 System: Scales missing
945029 Distribution of Target Quantity to QW8 failed
880097 Attachment Original transfer for Contracts
989367 Performance improvement for new GOA distribution logic
916562 CM/CND: Dump in distribution of GOA with deleted line items
922172 Contract attachment distribution enhancements
925014 More than one attachment not getting distributed to backend
923627 Attachement transfer to backend with possible file formats
923227 Attachments transfer not working in Background
937221 CTR: Impossible to modify distribution in Initial Upload GOA
967107 New logic for grouping backend contracts out of a GOA

Incase this OSS notes, don't work, then
Please try do this as well. Uncheck the ERS indicator, but then also pass tax codes from from GOA.
Then try out again.
For BADIs and other useful information, refer to these forum linksGOA Distribution SRM 5.0-ECC 6.0 - Account Category & Multiple Distribution
Distribution of GOA in R/3
Source determination in backend (R/3) for distributed contract i.e. GOA
FM or BADI s' used to create a GOA
Transaction For Creating GOA
Incase nothing helps, Please raise a OSS message with SAP as well.
Hope this will help.
Please reward suitable points, incase it suits your requirements.
Regards
- Atul

Cancelling ERS invoice of Freight GR

Hello all,
I know there already exist some threads about this topic, but I couldn find any with the connection to the freight solution (freight costs).
MR8M
Due to Message No. M8414; I'm not allowed to book an invoice cancellation in MR8M for an ERS invoice. Reason is
If you want invoice creation to take place completely using ERS, then you must cancel the goods receipt and not the invoice document. ERS will then create the relevant cancellation invoice document for the canceled goods movement. When the goods receipt is entered again, ERS creates the invoice document according to the goods receipt quantity and the conditions from the purchasing document that are valid at that time.
This method is the only means of guaranteeing that the messages that may be created during ERS are also issued.
This is clear for me, so I want to book the cancellation of GR in MIGO
Here the error message is: Transaction code MBST (=> use transaction ML81 / ML85) not defined
So I want to take ML81 or ML85
But here I do not have any chance to change, delete or cancel the GR.
I also checked transaction OMBZ.For GR-Based IV, Reversal of GR Despite Invoice for movement type 102.
Where can I finally start cancelling this process?
Hope anybody can help me,
kind regards Barbara

Hi,
Please refer below link in this regard. Thanking you.
cancellation of ERS invoice and GR

Error message 'Message no. ME867' while deleting a PO line item

Hi,
This is a PO item without material master and account assigned to cost center.GR (101) was done and the GR is cancelled(102)for the total quantity.
While deleting the PO line item, i am getting error message with out any description.When i check the details of the error it is showing as 'Message ME867'. Since this error is not showing any error description, i am unable to know the cause of the error.
Please let me know what might be the cause and how can we rectify this.
Thanks in advance
Regards,
Rambhupal

Hi,
This means ERS is active in your system.
What this means is that when you do a GRN, an ERS flag is activated in the PO header. The ERS is then settled using the PO data in SRM.
If you have not settled this (at least this is what is indicated from the message), then uncheck this flag in the PO header and then try and archive.
Cheers.

ERS generated document with zero value for SES

Hi,
I have maintained service entry sheet.
Accounting entry is generated.
When I run T code MRRL, it has generated document with zero value.
This is not a free goods PO.
Why this is happening?
Please guide on this issue.
Regards,
Piyush

Hi,
Creating an ERS zero document is an expected system behavior ,you
could create an ERS zero document by doing the following wrong
procedure:
1. Create PO with ERS falg ON.
2. Perform GR for PO.
3. Create the invoice by MIRO.(Not MRRL).
4. Run MRRL (LIV-ERS).
For every purchase order with flag 'ERS' a table entry is generated.
If a goods receipt is posted, this GR should be invoiced via ERS
(Tr. MRRL). Manually posted invoices should be avoided, because
the table entry will not be deleted. A new invoice receipt must be
created while running ERS (but with amount and quantity zero and without
FI documents) in order to give a message to the vendor because he
has sent you an invoice by mistake.
Could you please check also the note:1069215
Best regards
Erika

Evaluated receipt settlement open, deletion not possible in R3

I am getting an error message "Evaluated receipt settlement open, deletion not possible" in R3 (message no ME867) when trying to delete a line item in PO. We did a GR and than reversed it (102 movement). I also unchecked the ERS flag and GR based IV on this line item but i am still getting the same message. Please help. Thanks in advance.

I've not seen this error before but if you have not executed an ERS settlement the GR and the reversal are still on the EKRS table. You can execute the settlement and the GR and reversal will create a zero value MM invoice and remove those entries from the EKRS table.
Regards,
Sandra

ISE 1.2 Patch 7 ERS API problem updating some endpoints with a new group

Hi,
I have a php library that i have implemented most of the ers api functions with curl requests, and it works fine, i can get all endpoints, search for a specific endpoint, delete endpoints and to some degree i can modify endpoints, but not all endpoints it seems. For some reason when i use my function on some endpoints, the static endpoint group assigment does not get updated, and the response from the ers api is just empty, whereas when it goes good, i get a list of the attributes that were updated.
Is there some specific requirements for which information has to be sent using the update_endpoint function in the ers api ? The examples have all information in every request, however what is actually needed in the request?
Jan

Have now tested by sending all parameters, even though i only want to change group or description, and it works.

BDC for ME01 to delete vendors in the source list

Hi ABAP'ers,
I am trying to write a BDC program to delete a particular vendor from ME01 TCODE. My program runs well till deletion after i delete a record it is showing a pop up to confirm and on clicking yes the vendor is deleted. But the source list is not getting saved, or in other words the BDC flow stops after deletion, though i have handled save ok code in my BDC internal table. is there a solution for this.
thanx $ regrds
thrinath k

Run in mode 'E' and fix whatever you have missed on your BDC.

ERS Payment

Can someone please tell me how I can display a P.O based payment through ERS.
I have done MIGO succesfully but the payment is not reflected in FBL1N. So is there a way to look to see if a payment has been scheduled or not ( to see if ERS is working or not)
Thank you.

Hi,
For every purchase order with flag 'ERS' a table entry is generated,
if a goods receipt is posted, this GR should be invoiced via ERS
(Tr. MRRL). Manually posted invoices should be avoided, because
the table entry will not be deleted.
Best regards
Erika

Log table for reservation deletion date and by

Dear ABAP'ers
Can anybody share where to find reservation deletion log include when, and by whom.
I try to search it on CDHDR but it doesn't come up. I try to put reservation number in each "Change Doc Object", "Object Value", "Document Number" field, but it doesn't work.
Any advice?
Thank you
Regards
Hadi

Hi,
have u tries tcode SM12 for log entries, just specify the object name and shall get all the details...
if still the issue is unsolved, pls let me know!!!!
thanks
ravi

Issue deleting SES of a Service PO

Hi Folks,
We have an issue deleting the SES# of a Service PO. The ERS invoice of that PO was previously cancelled,but acct maintenance (GR/IR clearing) entry was posted.Please help me out to fix this
Thanks!!

For a Material assigned Purchase Order you can Set Delivery Complete Indicatory to Stop Further Processings / GR.
But, For a Service Purchase Order Service Entry sheet will be Done instead of GR which will create GR Material Document in Back ground.
So the Only way is to Set the Final Entry in the Last Service Entry sheet.
Go to ML81 /ML81N and in Menu Service Entry sheet - Set Status - Final Entry and Save such that no Furhter Entry sheets are allowed.

ERS not happening

Hi
Iam not able to process ERS for vendor against a PO when in MRRL I put "document selection per vendor" in processing option in the initial screen but i can process for the same vendor against same PO when i put "document selection per PO item" in processing option. All the setting are maintained in vendor master for ERS. One thing to be noted is not this vendor when created the ERS was not checked. But after few months in XK02 we made the ERS settings.
Pls give your inputs
Dinakar

hi,
try one thing....
Delete the line item in the PO, then try to add new line item for the same vendor and then do the further process for ERS and try...
Regards
Priyanka.P

ERS PO DELETION

Similar Messages

Maybe you are looking for