ESS 60.2 in EP7 with ECC 5.0 issue

Hello All,
I am facing some issue in implementing ESS Busines Package in EP7 sp9.
Landscape:
we have EP 7 with sp8 - ESS business package 60.2 installed (separate box)
we have WAS 6.40 with sp10 - ESS 100 sp6 and PCUI GP 100 sp6 installed (separate box)
we have ECC 5.0 (separate box). WAS ABAP Stack
We are using Travel Management of ESS, when we click dispay/print button in one of the opened expense report nothing is happening.
If we directly run the webdynpro application thats working fine.
Basically the webdynpro getting data from ECC but its not displyed in iview in portal EP7.
Also when i try to exit from edit mode in expense report its opening new browser with portal.
Any input on this is highly apreciated!!!!
Thanks in Advance.
Regards
Vijay

Hi Jeevan,
Please check your land scape is as per the notes:
1007341     SAP ERP 2004/2005 - supported ESS/MSS system landscapes
824757      Dependencies between SAP ERP component lists
1034385     BP ESS/MSS ERP2004 and ERP2005 on EPNW04s
1004528     SAP Self Services: Business packages and components
BR, Abdul

Similar Messages

Is it possible to use XSS 2005 on EP7 with ECC 5.0 ?

Hi all,
I have an ECC5.0 and I want to upgrade my EP6 to EP7. I'm using XSS 2004 on EP6 and I want to use XSS 2005 on that EP7. I've seen on different notes that it is not possible to use XSS 2005 with ECC 5.0 as a back end.
Is there any solution to connect XSS 2005 to ECC 5.0 ??? Please I really need a positive answer
Thanks,

Hi Joseph,
I have gone thru same problem in my last project but my situation was little different.
Actually Business Package of ESS/MSS has two components:
1. Portal Objects (iView, Roles, Pages etc )
2. XSS - The Java WebDynpro Code (which in turn contain 3 component SAP_ESS, SAP_MSS, PUSIC_GP)
Also the prerequisite is that we should have SAP_HR (will give HR functionalities in ECC) and EA_HR (contains RFC, structure required for XSS).
Now the restriction imposed by SAP is that SAP_HR, EA_HR and XSS should be on same version and patch level. Make sense also. However there are situation where you can deviate from above restriction. (I will explain the same below).
So what you can do is to install the Portal objects(iView, Roles, Pages etc ) on EP 7.0 (can be installed on EP 6.0 and federated to EP 7.0), install XSS 2004 on EP6.0 (having JAVA 640) and connect the same with ECC 5.0.
You are looking to install Portal Objects, XSS 2005 on EP 7.0 and connect with ECC 5.0. This is possible but NOT recommended. Actually XSS 2005 WebDynpro will look for enhanced structures, RFC in ECC, which XSS will not find and will throw dumps (sometime java and sometime SAP dumps). You can fix the problem by manually installing the new functionality but believe me it is VERY cumbersome task and will make your system highly unstable.
What I would advise you is to look into your requirement once again and educate your end client with the problem and take appropriate action accordingly.
Do let me know if you need any further help.
Cheers,
AB

Account 360 with ECC integration

We are trying to integrate C4C with ECC and having issues with the report that is provided by SAP to transfer the data. In the report given in note : ZSAMPLE_ERP_REPORT_PUSH_DATA, there is a reference to proxy class - zco_operational_data_provision. We do not have integration with BW, so which webservice whould we use to generate this proxy.
Anyone had success with implementing this scenario?

Hi R@adi,
ZCO_COMMUNICATION_SERVICES_MAN is the firs WSDL in Communication arrange "360 OVERVIEW - ACCOUNT.
if you not show this WSDL, verify this question in "Project Scope":
-->Communication and Information Exchange-->Integration with External Applications and Solutions-->Integration with Central Analytics-->Do you want to make analytics data from the solution available to an SAP NetWeaver Business Warehouse system?
Regards
Simone

ESS implementation posibility with ECC 6.0 and EP 6.0

Hi ,
To implement ESS with ECC 6.0 and EP 6.0
Any body can suggest for this implementation feasibility and possibility.
What are the Business packages has to down load and where can we get those BPs.?
After importing into EP 6.0 , what are the configurations and settings required to get SAP HR screens/ivews (preview when we create after systems in EP),
What are the prerequisites and hardware and software requirements for 8000 users (apprx) ?
Any version upgradations are required for implementing this or
can we use this ECC 6.0 as backend and EP 6.0
and please help required for all those things.
Thanks
Kumar.

For ESS/MSS based on ECC 6.0 (ERP 2005), you can download the XSS business packages from
service.sap.com/download --> Support patches and packages --> Entry By application Group --> SAP Application Components --> SAP ERP -->
SAP ERP 2005 --> Entry By Component --> SAP XSS --> (SAP ESS 600, SAP MSS 600 and SAP PCUI_GP 600).
You can use JSPM to apply these business packages on to the portal. To use JSPM, you have to login to the portal server using <SID>adm to be able to use the JSPM tool.
Business Packages and components in it: you BP consists of the 2 following parts
1) BP_ERP5ESS / BP_ERP5MSS is Portal Business package which consist of iview, pages and roles.. while SAP_ESS / SAP_MSS. is WebDynpro part of it.
These iviews will direct to some WD application which are part of SAP_ESS / SAP_MSS. and they are deployed on server.
2) you have to simple go to
service.sap.com/downloadSupport patches and packagesEntry By application GroupSAP Application ComponentsSAP ERPSAP ERP 2004/2005--Entry By ComponentSAP XSS
pick the correct version and download. You get full package not incremental. Old ones will be overwritten when you deploy them. try to download them again if it failed first time.
3) Refer note 761266 for package compatibility.

Compatability of ESS/MSS ERP 2004 with ECC 6.0

Hi,
I was using ERP 2004 ESS/MSS on EP 7.0 SP 8. My backend was ECC 5.0.
Recently we upgraded our backend to ECC 6.0. But after the upgradation the ESS/MSS packege is not working on the portal. Its showing the below error.
<b>com.sapportals.portal.prt.core.broker.PortalApplicationNotFoundException: Could not find portal application com.sap.portal.appdesigner.api_framework
    at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java(Compiled Code))
    at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java(Compiled Code))
    at com.sapportals.portal.prt.core.broker.ExternalApplicationItem.prepare(ExternalApplicationItem.java:180)
    at com.sapportals.portal.prt.core.broker.SAPJ2EEApplicationItem.prepare(SAPJ2EEApplicationItem.java:232)
    at com.sapportals.portal.prt.core.broker.SAPJ2EEApplicationItem.start(SAPJ2EEApplicationItem.java:192)
    ... 8 more</b>
Is ERP 2004 ESS/MSS comapatbile with ECC 6.0 or there are any steps to be performed after upgradation from ECC 5.0 to ECC 6.0?
Any suggestions??
Regards
Debasish

The new Business Packages meant for ECC 6.0 are based on Webdynpro for Java ....which have a different and better look and feel ....these are based on a RoadMap(Floor Plan Manager) which let the employees/managers to go from Overview(dislay the data),edit (to change) ,Review(to review) and Confirmation (To Confirm)....
Hope it helps.
Shikhil

ESS Configuration with ECC 5.0

Hi
I am trying to configure ESS with ECC 5.0 as the HR server
My J2EE system is WAS 7.0 with EP 7.0 and patch level 12.
I am getting the following error when I am trying to get the ESS pages in EP
com.sap.tc.webdynpro.progmodel.context.ContextConfigurationException: DataNodeInfo(FcXssMenu.AreaConfig.AreaConfig_Output.Serviceinfo): structure field Helperservice not found
I was successfull in configuring ESS with ECC 6.0. I did the same configuration for ECC 5.0 also.
Can anybody help me
Thanks

Hi Jeevan,
Please check your land scape is as per the notes:
1007341     SAP ERP 2004/2005 - supported ESS/MSS system landscapes
824757      Dependencies between SAP ERP component lists
1034385     BP ESS/MSS ERP2004 and ERP2005 on EPNW04s
1004528     SAP Self Services: Business packages and components
BR, Abdul

ESS 50.4 on Internal ITS 6.20 with ECC 6

We are using ESS 50.4 on ECC6 with internal ITS. It is working well except for a mouseover message when the user places the mouse over a pushbutton in the applications for Address, Personal Information, Bank Information, and Family/Related persons.
The mouseover message says 'Pushbutton deactivated' even though the pushbutton has not been deactivated.
Can this be fixed via the portal or through ICF or in SE80?
What development causes a message on a mouseover of a pushbutton when using SAPGUI for HTML?
Is it an ICF variable setting, an ITS CSS issue, a portal issue, or something else.
The ITS parameters are set to:
~singletransaction=1
~webgui=1
~webgui_simple_toolbar=128
~generateddynpro=1
~popups=1
Is there some other parameter that would prevent the mouseover message from appearing?
Also, the web status menu appears when the user right clicks in the screen. How to stop this from appearing?
Thanks for any suggestions,
D. Maupin
University of Kentucky

Hello Donna,
I would like to ask you to have a look at SAP note [1263586|https://service.sap.com/sap/support/notes/1263586] (Quick info on screen button contains text "deactivated"); it has been released a few days ago. It seems that this note is what you are looking for.
Thanks and regards,
Cris

EP6 SP2 [WAS620] Can Connect with ECC 6 [WAS700] ?

Here portal is EP6 SP2 [WAS620]
And Backend Server Upgrading to ECC6.0.
Is it possible to continue with Portal 6 with ECC 6 ?
Any specific SAP Note for this compatibility ?

Hi Sumanta,
that depends on what you are doing. If you have for example "only" some SAP transaction iView that should still work.
Also other JCo based iViews will work -- you will however not be able to run the latest business packages for ESS (for example) because they require a EP7.
Regards,
Holger.

ESS 50.4 and EP7

Hello,
I am planning an installation of EP7 with an ESS Business Package. Unfortunately the HR system is still 4.7 which means I will need to install the ESS 50.4 Business Package.
We do have an ITS 6.20 installation which I will make use of for the iviews.
If anyone else has done a similar installation please can you list the potential areas of risk and how you managed to resolve it.
Also if you have any suggestions on how you did the installation, I would appreciate your input.
Thank you.
Regards,
Himesh Hansjee

PK,
Please see the ITS Administration guide and the ITS Installation guide.
You will see that when you install the External ITS you will be asked for R/3 connection information, such as logon group, hostname, system name, system number, message server, depending on what connection method you choose.
As for connecting the External ITS to Portal, as I stated, you will create iViews in the Portal and you will be asked for a URL. The URL is the External ITS URL, which should be something like http://hostname:port/scripts/wgate/service/!
Please read the guides and FAQ. Thank you.
Edgar

ITS version compatabiity with ECC 6.0

Hi Experts,
I have to install ITS (server components) at one of my client side to some transaction on web, earlier they were using R/3 4.6 and they switched to ECC 6.0
Please tel me which ITS version is comatable with ECC 6.0
I installed server components (ITS) from R/3 4.7 cd pack but i was unable to publich internet services from se80, (published successfully message on status bar but no service in the c:\program files\SAP\ITS\6.20\service folder)
Then I tried to install ITS from ECC 6.0 cd pack but i was unable to install it. the setup.bat file ask for sapinst.exe file but its not in the CD(i also checked in another ECC6.0 pack )
I dont no which one is compatable with ECC6.0, i have to generate web services for some customised transactions, can anyone tel me how to solve this pproblem of installation or if any other way to generate web services please tel me the procedure...
Regards
Manish

Instead of PZM3, use the Homepage Framework to launch your ESS offering (HF is configured in the IMG and tied to the XSS Java components that will need to be installed as well). You can run ESS standalone in this manner although SAP frowns on it (hey, they want to sale the portal! haha).

PZM3 with ECC 5.0?

We are planning to upgrade our HR system from 4.6C to ECC 5.0. We are using the ITS based ESS trxn PZM3(standalone workaround - see as well SAP note 321439).
Will this workaround still work with ECC 5.0 or do we have to install EP?
Thanks and regards,
Mathi

Hello Mathi,
one of our customers just upgraded their HR from 4.6C to ECC 5.0 and are still on their standalone ITS Server where they are running their ESS-Services without a Portal.
So the answer is yes.
regards,
Markus

SSO to EP7 with Microsoft AD

Hi All,
We have implemented EP7 and have set the Portal UME to integrate with our Microsoft AD. We are now able to login to EP7 with a valid AD user and password.
However, we would like to make it that once our user login to their workstation with a valid AD ID, password and domain. They are able to directly access the EP7 main page with the URL entered, ie. the default portal logon page will not be shown.
Appreciate your advised if you have a solution in this.
Many thanks.
Best Rgds,
Leonard

Hello Leonard,
You could achieve this by windows based NTLM.
Please check the below link
<a href="https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/49ffe54b-0601-0010-ff9c-b7200de251e5?prtmode=navigate">https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/49ffe54b-0601-0010-ff9c-b7200de251e5?prtmode=navigate</a>
Regards
Ajey

How is the integration with ECC in SRM 7.0??

Hi,
Working with SRM 5.0 or 5.5 the use of XI for integration with ECC is not mandatory because when we send any document from ECC to SRM like requisitions (to convert them in shopping cards) or when we send any document from SRM to ECC like shopping cards, PO´s, contracts, we only use the RFC´s and the abap programs.
Is the same behavior with SRM 7.0?????
Could the integration from SRM 7 with ECC 6 work with RFC´S without XI or for this vertions is XI mandatory?????
Thanks

SRM70 is closely integrated with XI for transferring docs between ECC and SRM. SAP introduces eSOA tech nology with SRM70 and hence all documents like PR from ECC to SRM, Central Contract from SRM to ECC, PO creation (Classic), etc uses this techn ology.
Thanks,
Jagadish

Setting up SNP with ECC at a macro level

Hello experts
What are the different scenarios that can be set up with SNP - ECC - SNP with respect to Distribution planning ?
Meaning stock transfers , assuming PPDS will be active and will only be used for creating PPDS planned orders.
We have 10 plants and 34 DC's and regional DC's.
Thank you.
Regards
KK

HI KK
This is more an architecture question that has to be addressed at macro level.
Assuming your demand is coming from DP or somewhere outside, a SNP run either SNP Heuristics or CTM or optimizer could be setup to move that demand from DCs to Plants. Then you run the planing runs at each plant in PPDS producing planned orders in short term and SNP run for medium to long term. If you have external procurement, the system creates purchase reqs.
If your plants are sourcing your DCs and then to regional DCs, you may want to run this in 3 stages, first SNP from regional DC to DC, then DC to plant and finally at Plant.
At one of our projects, we separated the SNP runs into Heuristic( where these is no capacity issue) and some into CTM ( where there are more constraints).
Based on the scenario, you may choose to integrate these planed orders, purchase reqs. from SNP/PPDS to ECC and execute there.
You may also run a deployment run from the plants to DCs and not integrate these deployment reqs. with ECC ( as you would not execute them yet), then finally convert these deployment reqs. into STOs/POs and then push these to ECC for execution.
There are infact so many possibilities based your business need. You may take above as a frame work. Hope this helps.

SAP SRM 7.0 with ECC EHP 4 components to execute scenario

Hi All,
I am new to SAP SRM 7.0.Could you please let me know that what are all the components needs to be in place to execute the technical scenarios and business scenarios.I had an hands on experience on SAP SRM 5.0 with ECC 6.0 backend.
Some where i read that there are lot of configuration changes when we integrate SRM 7 with ECC EHP 4.Do we need to have PI 7 for executing Centralized contract and plan driven procurement scenario?Please guide me to have some exposure towards higher version.Thank you in advance.
Best Regards,
praveen

Hello,
You can refer the INSTALLATION AND UPGRADE INFORMATION , Master guides etc maintained at the below mentioned location which will answer all your query's here.
Goto URL http://service.sap.com/srm-inst and then navigate to SAP SRM --> SAP SRM Server 7.0 .
Best Regards,
Rahul

ESS 60.2 in EP7 with ECC 5.0 issue

Similar Messages

Maybe you are looking for