ESS Form 16 ~designbaseurl illegal host entry

While executing the form 16 in portal we are getting an error.
~designbaseurl illegal host
but if i run this directly using the url its working fine.
Suggest mes.
Thanks in advance,
Mr.Chowdary

Hi Jigar,
How did u solve the problem . I am also facing the same problem .
Plz share with me .
Regards,
Surekha .

Similar Messages

Error while displaying ESS Form 16, ~designbaseurl illegal host entry

While executing the form 16 in portal we are getting an error.
~designbaseurl illegal host
but if i run this directly using the url its working fine.
Suggest mes.
Thanks in advance,
Mr.Chowdary

But if you have an error in ST22 you don't need to pester yourself with ST01. ST01 is pretty much the last resort of debugging when you can't destinguish where an error originates from.
Since you do have an error in ST22, you should check the code segment which is provided there in the dump, search for the repository object which holds this code and take a look at it or externally debug it.
Cheers, Lukas

ERROR = plugin: illegal host in ~designbaseurl

All,
We have been stumped by the following. We are running NW 7.00 on AIX 5.3 and Oracle database 10g. This error occurs randomly. It occured when we went from kernel 7.00 patch 102 to kernel 7.0 patch 157. That was the only thing that changed other than the ST-I/PI we installed. It occurs when we execute IAC transactions through the enterprise portal to the backend SRM system.
For some reason it is truncating the hostname. Then it tries to find the host and searches and then comes back with a timeout. I have been checking the kernel patches and the new ones don't address this issue. We are heading for stack 15 for the systems and they come with patch 146 for 7.00.
There is one note with anything simular, and that is note #889454. I mean the worst case scenario is that we back up to 146 when we apply the stacks.
This is repeatable, but we don't know why this is random.
Any assistance would be greatly accepted.
=====
We have found the following errors and warning inside dev_w6:
W *** WARNING => plugin: unable to determine full qualified
hostname for https://erp-portal-qa.itap.purdue.edu:
443/irj/portalapps/com.sap.portal.design.portaldesigndata/themes/its
2008-05-22T14:02:29.754 [itspagat.cpp 882]
W *** ERROR => plugin: illegal host in ~designbaseurl=https:
//erp-portal-qa.itap.purdue.edu:443/irj/portalapps/com.sap.portal.design.portaldesigndata/themes/its 2008-05-22T14:02:29.754 [itspagat.cpp 898]
W *** ERROR => plugin: ItspAgat_InitContext failed, rc = 1
2008-05-22T14:02:29.754 [itspxkrn.cpp 500]
W *** ERROR => Failed to convert diag input, session:
0x7000007e7f57e90, rc: 0x1 [itspxx.cpp 943]
W *** ERROR => Failed to convert html->diag, send icf error page
[itsplxx.c 1691]
M ***LOG W00=> [itsplxx.c 1692]
W *** ERROR => ipl_ConvertIn returns 1(ITSPE_FAILURE) [itsplxx.c
1694]
W *** ERROR => Raise Last error:[18 from: itspagat.cpp:899] [itsplxx.c 1216]
W *** ERROR => RaiseError(sapdext) ITS_P:18 [itspagat.cpp 899]
W *** ERROR => MSGV0(illegal host in ~designbaseurl)
[itspagat.cpp 899]

1. Up the trace level of the ICM and see if the URL is in fact coming in corrupt. The question is the frequency as the ICM trace can get quite bit.
2. I would see if the issue is only happening on one app server (I would doubt this is the case but lets rule it out)
It happens everywhere (multiple app servers)
3. I would ask how many apps you have and how you are balancing across them. If you only have one instance then it is unlikely you are balancing but this type of scenario happens when you have multiple via a web dispatcher. If you have a web dispatcher I would set the logging something like this icm/HTTP/logging_00 PREFIX=/, LOGFILE=TRACE_HTTP_LOG, LOGFORMAT = %t %h %h1 %u %s %L %f , MAXSIZEKB=1000, FILEWRAP=on In fact you may even want to set this both in your web dispatcher and all your ICM's. This will show your URL's.
It is more likely that the header may have the truncation so perhapos upping the web dispatcehr trace file to 2 which will show headers at that stage.
We don't use web dispatchers. We use an external product for dispatching from "F5". (www.f5.com.
4. How many Portal instances and servers are there? There is some logs you can up the value by.
Enterprise portal is federated. There is one server for the producer portal and 3 servers for the end user portal.
5. If the HTTP is in fact coming from your PC to SAP rather than directly from the portal then perhaps a front end HTTP trace tool like HTTPLOOK (plenty of others) can help.
The HTTP is not coming from the end users in the university log in through the portal.
6. There is always upping the trace at the WP level to ensur ethe truncation is not happening there but this can lead to very large WP trace files quickly.
This has been done. The error in the original message is the trace before we moved the trace up to 3. In the level 3 trace, it says that the variable that the host name is supposed to go into is not big enough.
7. The biggest question of all is .... which of the following are true.
1. The issue happens only in multi ABAP instance systems YES
2. The issue also happens with a single instance system. YES
3. We only have a web dispatcher for this in production NO
4. We can recreate this problem in non production systems. YES (any system that has the new kernel)
5. We cannot recreate this in non production systems despite having the correct data to run the test. NO
6. We patched only the ABAP system (only the SAP kernel)
7 We patched the ABAP and Web dispatcher NO (Can't since we don't use the WD)
8 We patched the ABAP the Portal and all other bits YES (We put all the kernel stuff in all the systems)
We installed kernel 157:
disp+work information
kernel release                700
kernel make variant           700_REL
DBMS client library           OCI_102 ()
DBSL shared library version   700.08
compiled on                   AIX 2 5 005DD9CD4C00
compiled for                  64 BIT
compilation mode              UNICODE
compile time                  Apr 21 2008 20:44:52
update level                  0
patch number                  157
source id                     0.157
supported environment
database (SAP, table SVERS)   700
DBMS server
   ORACLE 9.2.0..
   ORACLE 10.1.0..
   ORACLE 10.2.0..
operating system
AIX 1 5

Running ABAP Web Dynpro Application without host entry of web server

Hi All,
I am trying to run a web dynpro application, its working fine when I have done host entry (host nam.domain.extension) of web server.
But when I remove this entry from host file it not runs.
Can you tell me the posibility of running this application without host entry? Based on this possibility I have to proceed my work. Please guide me.
Thanks and Regards
Sudhir Gupta

Hi Sudhir ,
See the below link , its necessary to provide FQDN.
http://help.sap.com/saphelp_nw70/helpdata/en/67/be9442572e1231e10000000a1550b0/frameset.htm
Regards
Yash

Adobe Muse CC Form for third party hosting servers

I start using the new adobe muse cc forms for third party hosting servers and i have this website for one of my customers i create a CONTACT FORM on the website and when try to submit it says "server encontered an error" i chat with adobe support they send me a URL with the options to fix my problem and then when i run this URL "http://mistercoffeediaz.com/scripts/form_check.php" everything is working fine. Please any somebody help me how to work this issue around. THKS..

Responded to your other thread - http://forums.adobe.com/message/5555450#5555450.
Thanks,
Vinayak

RZ20 server host entries disappear under Operating System Node

Hi,
I am trying to setup auto reaction methods in RZ21 and want to assign them to properties in RZ20 on SolMan (as my CEN) under
Operating System -> <server host> -> filesystems -> <file path of choice> -> Percentage_Used
for the percentage_used i assign an auto reaction method and save it. Now it seems for some bizarre reason, some of the server hosts entries under Operating Systems disappear at the next auto refresh and reappear and i lose my assigned auto reaction methods, which means i have to redo it again.
does anyone else have or had this problem and have a solution for this?
your help would be much appreciated.
Mani

I would not encourage using root user.
Your oracle user may not have the correct permissions. You need to ensure that oracle is in the required OS group and have the required privileges and file persmissions. Ensure that root.sh was run during your install.
If you check the corresponding trace files under
$ORACLE_HOME/sysman/log/ you may find more detailed message.
e.g emagent.trc

How to add/modify host entry in iPad

How to add/modify host entry in the iPad Mini.
Is there anyway to achieve this in the iPad Mini, like any equivalent DNS configuration.

Point your DNS configuration to a local one in which you can add all tue IP aliases that you dream of.

How to add a host entry in ipad

I need to add a /etc/hosts entry on an ipad like we do in unix. Is it possible?

Point your DNS configuration to a local one in which you can add all tue IP aliases that you dream of.

Illegal host/domain name found

Hi, i hit some error when reply mail to a mail account which is valid:
16-Mar-2006 16:11:26.98 tcp_local R 104 [email protected] rfc822;[email protected] [email protected] Illegal host/domain name found (TCP active open: Failed gethostbyname() on misty.sgx.com.my, resolver errno = 1)
from nslookup:
santomas.com.myServer: ns1.jaring.my
Address: 161.142.201.17
Non-authoritative answer:
Name: santomas.com.my
Address: 202.189.48.236
I'm not an expert on DNS, what cause this error? This domain with the account is valid.
Will "nomx" keyword put in under tcp_local in imta.cnf will solve ?

also:
set type=mx
santomas.com.myServer: ns1.jaring.my
Address: 161.142.201.17
santomas.com.my preference = 20, mail exchanger = meia.sgx.com.my
santomas.com.my preference = 30, mail exchanger = misty.sgx.com.my
santomas.com.my nameserver = ns1.nameserversecure.com
santomas.com.my nameserver = ns2.nameserversecure.com
ns1.nameserversecure.com internet address = 202.189.48.238
ns2.nameserversecure.com internet address = 202.189.48.239
there is not "nomx" keyword under tcp_local or default.....
Messaging Server 6.2

Help! We have a form with more than 200 entries and when I looked at it yesterday it had one! When you download the form to excel they all show up. However, when I added another record today it disappeared. Can you tell me what's happening? I've been usin

Help! We have a form with more than 200 entries and when I looked at it yesterday it had one! When you download the form to excel they all show up. However, when I added another record today it disappeared. Can you tell me what's happening? I've been using adobe forms for 2 years with mass response feedback and have never had this problem.

Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M.

Why Do We need Host Entries in drivers-- etc--Host?

What does host entries do with opening the Froms?

user574397 wrote:
Hi,
If We are not entering any entries for an application(12.0.6)..It is not opening...Just Need details about significance of Host Entries....Searched in Google did not find an answer and hence posted a thread....What is the error you get?
The entries in the hosts file are required for the application to function properly -- Please see these docs for details.
Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86 [ID 761564.1]
Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86-64 [ID 761566.1]
Thanks,
Hussein

10g Forms Demo - Client side host command Jar file.

Hi all,
In the ORACLE 10g forms demo , client side host command jar is missing , atleast for me.
Is that available at any link?
Or anyone having it..?
Please give me a clue..
Or mail me, please([email protected])
Thanks
Jeneesh

The deployment architecture is different between forms 10g and forms 6i.
In Forms 6i HOST built-in command will run on the client machine since you are running as client/server, but in WebForms (Forms10g) the HOST built-in command will run on the middle tier which is your application server machine.
In order to run hosts commands in WebForms you need to use webutil and use CLIENT_HOST in the webutil.
check the [Forms 10g R2 Demo|http://download.oracle.com/otndocs/demos/Forms_Demos_10gr2.zip] for sample codes of webutil.
You are using NO_SCREEN in your example, this will hide the window.
Tony
Edited by: Tony Garabedian on Nov 26, 2009 2:43 PM

IView N/A Component N/A check host entries for System SAP_ITS_XSS

Hi,
if i enter the purchasing are and by each link the same failure occurs:
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
Application URL ':///sap(ZT1CNE1Oa0dZV2NVTnNGTlBrTjJOZkF3JTNEJTNENnIwcUVRM0ZVdlRJN1QwQVd3dDdRdyUzRCUzRA==)/bc/gui/sap/its/BBPSC01' is not valid! Please check the protocol and host entries for system 'SAP_ITS_XSS'..
See the details for the exception ID in the log file.
the url changes each time.
can anyone help me?
regards
sleepy_head

Hi,
Please check the System Definition of SAP_ITS_XSS in SYSTEM ADMINISTRATION. In this, Please check the CONNECTOR and ITS properties.
Please check if all the entries are fine.
Regards,
<i><b>Raja Sekhar</b></i>

Illegal host/domain name found - emails bouncing;

After using PhotoStream to post a picture on Facebook, my email asked me to confirm a password, which I've never had to do before. Now I can't send or receive email on the MacBook me.com account b/c an "illegal host/domain" message returns with the email. I don't know if I should be using the iCloud or my previous incoming mail server as the main server. Something changed after the PhotoStream attempt to connect the devices (iPhone and MacBook).
Anyone have any ideas? I read other posts, but didn't see the resolution.

I can now get emails to go OUT from my MacBook, but I can't receive them. Can get them just fine on the iPhone -- confusing!

TS3988 Reason: Illegal host/domain name found

Why am I suddenly getting the error:
This report relates to a message you sent with the following header fields:
Message-id: <11EBCE80-CD02-4B37-9CE4-641CED12AC92 @icloud.com>
Date: Mon, 15 Apr 2013 18:23:06 -0400
From: Charles Kinnear <chkinn*** @icloud.com>
To: "bchoteldire @celebrationcl.com" <bchoteldire*** @celebrationcl.com>
Subject: Re: Reference
Your message cannot be delivered to the following recipients:
Recipient address: bchoteldire*** @celebrationcl.com
Reason: Illegal host/domain name found
Recipient address: ckinn*** @celebrationcl.com
Reason: Illegal host/domain name found
<Email Edited by Host>

It's a really bad idea to post email addresses - it's an invitation to spam - and I've asked the Hosts to remove them.

ESS Form 16 ~designbaseurl illegal host entry

Similar Messages

Maybe you are looking for