Essbase Add-in GCSetlocale error for 11.1.2.2 while uninstalling previous 7 ad-in version
Hello all, on our clients machines, which are all running 7 version of the excel add-in, trying to remove the 7 version and re -install the 11.1.2.2 version results in the following error "Failed in GCSetlocale(). Please contact your system administrator for more information". This does not happen with a fresh install of the add-in, it happens only when the 7 version is being uninstalled and the new version is being installed. I have already looked at countless places for solutions. While uninstalling(following Doc 1265740.1) the previous version, we removed all the registry keys and environment variables relating to the older version. All the environment variables on the re-install look fine and
ESSLANG has been set to English_UnitedStates.Latin1@Binary.
I do not know what other options I have and what else to do. Please do suggest, we have been working on this for two days now and the whole upgrade itself did not take that long. Frustrating that a client install is holding us up.
Thanks in advance,
Thanks,
Ted.
We finally got it to work after spending two days on it, the solution was to clean some files being written to system32 folder from the 7 version install. It was a real pain and there was not one particular thing we cleaned, we cleaned every bit we could and that solved it.
Thanks,
Ted.
Similar Messages
-
I regularly like to highlight areas on web-pages, select print/name a print preset as "Print Selection" and check-mark 'Print Selection Only' of Options under the Firefox sub-heading. Then when I wanted to quickly print a selection instead of a whole web-page, I just highlighted an area, activated print, selected "Print Selection" and then checked print preview to view the selection before printing. That worked from version 2 only.
Now in version 3 +, all above can be done '''except''' the check-marked 'Print Selection Only' option in the Firefox sub-heading keeps resetting itself, even IF you have saved it check-marked as a print preset. Selecting the saved preset "Print Selection" next time will print (preview) the whole web-page, and not what was highlighted (selected) for printing. Why was this feature turned off?baileyb1 wrote:
My skype used to work, and now it doesnt work anymore. I just get an error message now.
Access violation at address "Skype.exe" Read of address 0000000048.
Help, it used to work before but no longer. I dont know how to get it working again.
Baileyb1
Open Windows Event Viewer -> Custom Views -> Administrative Events. Look for the recent error messages with timestamp corresponding to Skype crash. Copy and paste here the text from the General tab. -
Essbase add-in Error (duplicate name found in grid)
Hi,
I have upgraded from 7.3 to 9.2 essbase add-in and get the following error when zooming into a product dimension - seems to be a problem with base member name and alias showing duplicates!
However this error does not occur on a new installation of 9.2 where there was no previous version of essbase add-in!
Has anyone experienced this or know of a work around? - the Cube is built using ASO/AISSame issue here. I have a call in with Novell for this, so hopefully it will get sorted soon. I suggest others with this issue raise calls as well to get it up the priority list.
-
Essbase Add-in Error - Cannot Find Message Database
Error #1040007 - Cannot find message database. Error received launching either the essbase add-in or app manager.Arbor path has been verified in path statement, and is first. Running under Win 2000, no changes to PC.Can anyone advise what may be causing this problem? Specific question: Where would the "message database be located?".Randy [email protected]
It's used to point to the message database (seriously)... LOL! I've never seen it used anyplace I've done Essbase and to my knowledge no one has ever been the worse off for it. It's probably just as well that you deleted it.Regards,Bruce
-
Error Msg - "You must add the Class files for this enterprise bean"
Hi,
I am creating creating new enterprise bean using j2sdkee1.2. I am able to create .ear file in desired folder, but can not create .jar. Please help. Getting above error message.
remote, home interface files and file having business logic (EJB) is compiled and kept at desired location.
j2ee server started, Deploytool is started.
Then I can successfully create new application (.ear file)
Then I go for creating new enterprise bean. I get same application name in Drop down list named "Enterprise Bean will go in".
Then I can add home, remote and ejb class file to create jar ("Add" under "Contents" ).
When I say ok after adding these 3 files, I am getting error - "You must add the Class files for this enterprise bean".
In the deploytool console, getting error - "java.io.FileNotFoundException: C:\2sdkee1.2\mahesh\ConverterEJB.class (The system cannot find the path specified) "
Can you please help me where to configure the path?
Can u please help?
Please send your answer to - [email protected]
Cheers!the path really begins with '2', without a 'j', ie not c:\j2sdkee1.2\...?
"java.io.FileNotFoundException:
C:\2sdkee1.2\mahesh\ConverterEJB.class (The system
cannot find the path specified) " -
Replaced HD yesterday Was able to restore from Time Machine Now, it won't back up to Time Machine. I removed the TM and tried to add it- the error is "The disk image for "computername.sparsebundle" is in use. Try ejecting the disk image - How do I do?
Hello jfilbey,
Thanks for using Apple Support Communities.
Power cycle the disk Time Machine is backing up to.
For more information on this, take a look at:
Time Machine: Troubleshooting backup issues
http://support.apple.com/kb/HT3275?viewlocale=en_US&locale=en_US
Best of luck,
Mario -
Re: Essbase Add-in and Excel 2010
I have a user who is getting the following error:
Excel experienced a serious problem with the 'c:\oracle\middleware\epmsystem11r1\products\exceladdin\bin\essexcin.xll" add-in. . . .Do you want to disable this add-in?
Do we need to reinstall the Essbase add-in ?
I have had the user disable other add-ins via 'File > Options > Add-ins > Excel add-ins and that didn't resolve the problem.
Are there any compatibility issues with 64 bit Excel?
Also, after installing Essbase add-in, what are the items that should appear
'File > Options > Add-ins > Excel add-ins
Excel version : 2010
Add-in version Essbase Spreadsheet add-in, Fusion Edition 11.1.2
I would appreciate a quick response.
My email id is < removed by moderator so that you don't get spammed for all Eternity >Also, after installing Essbase add-in, what are the items that should appear
'File > Options > Add-ins > Excel add-ins
The user has the following items:
Essexcin.
In2Hyp Essbase ribbon.
Oracle Essbase Query Designer Addin.
The items which I have in 'File > Options > Add-ins > Excel add-ins is:
In2Hyp Essbase Ribbon
Oracle Essbase OLAP Server DLL (Non- Unicode)
Oracle Essbase Query Designer Addin.
Could you please kindly help me understand the difference?
Do you recommend reinstalling the Essbase add-in ?
Thank you very much for your help. -
Excel crashes due to Essbase add-in
Hi,
I have Essbase 11.1.1.3 and am using the excel addin 11.1.1.3 on Office 2003 in Win XP. One issue everyone is facing is that, once we install the excel add-in on their machine, they are unable to run any other tool that launches excel.
For example if they try to export something from JD Edwards, when excel launches, it crashes and they get the "fatal error...excel has crashed etc etc" error message. If I unregister the essbase add-in, it exports fine.
They have a lot of other excel add-ins as well and those "play nice" with each other but many of the add-ins have issues with the essbase excel addin.
Has anyone faced such an issue?
ThanksThanks for the suggestion. I thought that only controlled the mouse actions though? I tried it anyway. Still doesnt work.
-
Hi,
We are using Essbase version 9.3.1. Recently, some of my users have upgraded to Excel 2010. They had been using it fine for about a month, and then all of a sudden, they started getting the error "Microsoft Excel cannot access the file 'C:Hyperion\AnalyticServices\bin\essexcln.xll' whenever they try and use the Essbase Add-In.
The only work around that I have found is that if they navigate to that path and click on the add-in and then open Excel, it will work fine, but obviously, that is not the optimal solution.
I have gone and downloaded Essbase version 9.3.3 and installed on the machine, but the same error is occurring. I don't see how this could be a problem, seeing that usually it is OK to use a newer version of the add-in, even if the overall product is on the older version.
We are planning on upgrading all of our products to 9.3.3 in the next couple of months, but I have a feeling that will not solve the add-in/Excel issue.
Any ideas?
Thanks in advance!Hi ,
The error which you are getting is due the Excel. Because Excel Disables
the Essbasee Addin some time.
When you get the same error follow the below steps.
1) Open Excel
2) Go to Home menu
3) Options -> Add-ins -> Select Disable Add-Ins
4) Select the Essbase Add-ins and Click on Enable.
5) Click Ok.
6) Restart Excel
Hope this helps.
Regards,
Prabhas -
Error: ORA-16778: redo transport error for one or more databases
Hi all
I have 2 database servers"Primary database and physical standby" in test environment( before going to Production)
Before Dataguard broker configuration , DG setup was running fine , redo was being applied and archived on phy standby.
but while enabling configuration i got "Warning: ORA-16607: one or more databases have failed" listener.ora & tnsnames.ora are updated with global_name_DGMGRL
Please help me how can i resolve this issue .Thanks in advance.
[oracle@PRIM ~]$ dgmgrl
DGMGRL for Linux: Version 10.2.0.1.0 - Production
Copyright (c) 2000, 2005, Oracle. All rights reserved.
Welcome to DGMGRL, type "help" for information.
DGMGRL> connect sys
Password:
Connected.
DGMGRL> show configuration
Configuration
Name: test
Enabled: YES
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
prim - Primary database
stan - Physical standby database
Current status for "test":
Warning: ORA-16607: one or more databases have failed
DGMGRL> show database
show database
^
Syntax error before or at "end-of-line"
DGMGRL> remove configuration
Warning: ORA-16620: one or more databases could not be contacted for a delete operation
Removed configuration
DGMGRL> exit
[oracle@PRIM ~]$ connect sys/sys@prim as sysdba
bash: connect: command not found
[oracle@PRIM ~]$ lsnrctl stop
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 08-OCT-2006 19:52:30
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
The command completed successfully
[oracle@PRIM ~]$ lsnrctl start
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 08-OCT-2006 19:52:48
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting /u01/app/oracle/product/10.2.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.1.0 - Production
System parameter file is /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Log messages written to /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=PRIM)(PORT=1521)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 08-OCT-2006 19:52:48
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=PRIM)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PRIM_DGMGRLL" has 1 instance(s).
Instance "PRIM", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
[oracle@PRIM ~]$ lsnrctl stop
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 08-OCT-2006 19:54:46
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
The command completed successfully
[oracle@PRIM ~]$ lsnrctl start
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 08-OCT-2006 19:54:59
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting /u01/app/oracle/product/10.2.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.1.0 - Production
System parameter file is /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Log messages written to /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=PRIM)(PORT=1521)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
[oracle@PRIM ~]$ dgmgrl
DGMGRL for Linux: Version 10.2.0.1.0 - Production
Copyright (c) 2000, 2005, Oracle. All rights reserved.
Welcome to DGMGRL, type "help" for information.
DGMGRL> connect /
Connected.
DGMGRL> create configuration test as
primary database is PRIM
connect identifier is PRIM
;Configuration "test" created with primary database "prim"
DGMGRL> add database STAN as
connect identifier is STAN
maintained as physical;Database "stan" added
DGMGRL> show configuration
Configuration
Name: test
Enabled: NO
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
prim - Primary database
stan - Physical standby database
Current status for "test":
DISABLED
DGMGRL> enable configuration
Enabled.
DGMGRL> show configuration
Configuration
Name: test
Enabled: YES
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
prim - Primary database
stan - Physical standby database
Current status for "test":
Warning: ORA-16607: one or more databases have failed
DGMGRL> show database verbose prim
Database
Name: prim
Role: PRIMARY
Enabled: YES
Intended State: ONLINE
Instance(s):
PRIM
Properties:
InitialConnectIdentifier = 'prim'
LogXptMode = 'ASYNC'
Dependency = ''
DelayMins = '0'
Binding = 'OPTIONAL'
MaxFailure = '0'
MaxConnections = '1'
ReopenSecs = '300'
NetTimeout = '180'
LogShipping = 'ON'
PreferredApplyInstance = ''
ApplyInstanceTimeout = '0'
ApplyParallel = 'AUTO'
StandbyFileManagement = 'AUTO'
ArchiveLagTarget = '0'
LogArchiveMaxProcesses = '30'
LogArchiveMinSucceedDest = '1'
DbFileNameConvert = '/u01/app/oracle/oradata/STAN, /u01/app/oracle/oradata/PRIM'
LogFileNameConvert = '/u01/app/oracle/oradata/STAN, /u01/app/oracle/oradata/PRIM'
FastStartFailoverTarget = ''
StatusReport = '(monitor)'
InconsistentProperties = '(monitor)'
InconsistentLogXptProps = '(monitor)'
SendQEntries = '(monitor)'
LogXptStatus = '(monitor)'
RecvQEntries = '(monitor)'
HostName = 'PRIM'
SidName = 'PRIM'
LocalListenerAddress = '(ADDRESS=(PROTOCOL=tcp)(HOST=PRIM)(PORT=1521))'
StandbyArchiveLocation = '/u01/app/oracle/flash_recovery_area/PRIM/archivelog/'
AlternateLocation = ''
LogArchiveTrace = '0'
LogArchiveFormat = '%t_%s_%r.arc'
LatestLog = '(monitor)'
TopWaitEvents = '(monitor)'
Current status for "prim":
Error: ORA-16778: redo transport error for one or more databases
DGMGRL> show database verbose stan
Database
Name: stan
Role: PHYSICAL STANDBY
Enabled: YES
Intended State: ONLINE
Instance(s):
STAN
Properties:
InitialConnectIdentifier = 'stan'
LogXptMode = 'ASYNC'
Dependency = ''
DelayMins = '0'
Binding = 'OPTIONAL'
MaxFailure = '0'
MaxConnections = '1'
ReopenSecs = '300'
NetTimeout = '180'
LogShipping = 'ON'
PreferredApplyInstance = ''
ApplyInstanceTimeout = '0'
ApplyParallel = 'AUTO'
StandbyFileManagement = 'AUTO'
ArchiveLagTarget = '0'
LogArchiveMaxProcesses = '30'
LogArchiveMinSucceedDest = '1'
DbFileNameConvert = '/u01/app/oracle/oradata/PRIM, /u01/app/oracle/oradata/STAN'
LogFileNameConvert = '/u01/app/oracle/oradata/PRIM, /u01/app/oracle/oradata/STAN'
FastStartFailoverTarget = ''
StatusReport = '(monitor)'
InconsistentProperties = '(monitor)'
InconsistentLogXptProps = '(monitor)'
SendQEntries = '(monitor)'
LogXptStatus = '(monitor)'
RecvQEntries = '(monitor)'
HostName = 'STAND'
SidName = 'STAN'
LocalListenerAddress = '(ADDRESS=(PROTOCOL=tcp)(HOST=STAND)(PORT=1521))'
StandbyArchiveLocation = '/u01/app/oracle/flash_recovery_area/STAN/archivelog/'
AlternateLocation = ''
LogArchiveTrace = '0'
LogArchiveFormat = '%t_%s_%r.arc'
LatestLog = '(monitor)'
TopWaitEvents = '(monitor)'
Current status for "stan":
Error: ORA-12545: Connect failed because target host or object does not exist
DGMGRL>This:
Current status for "stan":
Error: ORA-12545: Connect failed because target host or object does not exist
says that your network setup is not correct. You need to resolve that first.
As for Broker setup steps how about the doc or our Data Guard 11g Handbook?
It's 3 DGMGRL commands so I am not sure what 'steps' you need?
Larry -
Add-on Conflict error while installing add-on LOCIN release 100
Hi experts,
I want to install the add-on for India Localization for IS-Utilities i.e., LOCIN release 100. I have downloaded the add-on and also the CRT(SAPK-10001INLOCINISU) required for the add-on.
we got an error while installing the add-on it is
"OCS package SAPK-10001INLOCINISU does not match the current software component vector"
if we remove the CRT from the queue and start the installation then it will give add-0n conflict error.
Conflicts Between Add-On LOCINISU 100 and Support Packages
Component Release Support Package Information on
Conflict Resolution
FI-CA 600 SAPK-60004INFICA Include CRT
SAPK-60005INFICA Include CRT
SAPK-60006INFICA Include CRT
SAPK-60007INFICA Include CRT
SAPK-60008INFICA Include CRT
SAPK-60009INFICA Include CRT
SAPK-60010INFICA Include CRT
Plz tell the solution for this.Hi,
I had somthng like this recently with SCMEWM....
1. Clear out your EPS/in directory
2. Download the latest version of the add-on and all the patches ===> the latest CRT's will be in the patches.
3. Unpack them and try import again.
Also if you have not seen or read:
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=950513
Mark -
Hi,
I removed Addons in Add and Remove and in C:\Program
Files\SAP\SAP Business One\AddOns.
After iam installing Add on it's showing Error LIke
Add on TDS:Add on Installation failed bacuse another versione
ia already installed.please ensure that the verione number is
higher than the versione installed. not only TDS it's showing
Copy express, XL reports.can i remove .sbo files in SAP B1
file.Hi,
Please take a look at note 819501 on the steps to clean corrupt installation of add-on(s).
For XLR clean remove, follow the steps below.
1. Un-register all addons from Business One> Add On Administration.
2. Log into the company again to refresh it, uninstall process will continue.
3. Close Business One, check from Add Remove Programs, if XLR is still shown, delete it.
4. Delete following files from B1 installation folder
-> by default itu2019s C:\Program Files\SAP\SAP Business One
*AddOnsInstall.sbo
*AddOnsLocalRegistration.sbo
5. Delete folder C:\Program Files\SAP\SAP Business One\AddOns
6. Open SQL server, Delete Database IXMetaDataSBO.
7. In company database, delete all tables starting with ixt and ixv
8. click windows Start> Run> type '%temp%', rename SM_OBS_DLL folder.
for example 'SM_OBS_DLLOld' or delete it.
9. Open Register, delete XLR foler if it exists under
HKEY_LOCAL_MACHINE\SOFTWARE\SAP\SAP Manage\SAP Business One\AddOn\
10. Delete folder iLytix from HKEY_LOCAL_MACHINE\SOFTWARE.
10.Reinstall XLR
In addition, it's not recommended to remove Addons from Add and Remove programs. You can remove AddOnsInstall.sbo and AddOnsLocalRegistration.sbo.
Hope it helps.
Regards,
Jacqueline Jiang
SAP Business One Forums Team -
Can't add a new vNIC for service profile
Hello,
I'm trying to add an additional vNIC for Service Profile.
B200-M3, VIC1240+expander, IOM 2208XP, 4 links between IOM and FI 6248, firmware 2.2(1f).
At the moment 7 vNICs are configured for this service profile. Service profile is associated with blade server.
When I try to add a new vNIC (it will be 8th vNIC), I see the error (see the attachment).
For some reasons separate vNICs are more useful for Hyper-V servers :)
All vNICs created via vNIC templates. All vNICs configured as VMQ, only iSCSI configured as Dynamic,
As I read the spec, VIC1240 can support up to 250 vNICs. What is wrong ? How to fix that ?I have seen the VMQ limit being reached when applying the VMQ policy to the vNIC template. Can you try not selecting the VMQ policy for these new vNICs. If this works, you might be reaching the VMQ limits as described below:
Number of VMQ's:
128 is the Maximum number per vNIC
256 is the max number per Blade -
We have a number of users all of a sudden getting "No connectivity with the server. The file 'xxx' can't be opened because the server couldn't be contacted." errors trying to open MS Office docs (Word, Excel, etc.) in SharePoint with IE,
just by clicking the link and selecting the "Read Only" option. If they select the "Check Out and Edit" option, they can open the document no problem. One of my customers gets the error on one document but not the other, in
the same document library! The older document (a weekly report) was copied and renamed as per standard procedure. She can read the older document, but not the new one.
It is definitely a profile issue, as other people have logged onto the machines of the users with problems and do not get the error. We have also renamed people's c:\user profile folders and the corresponding Profilelist registry entry and the newly
created profile does not experience the error for these people. Renaming the profile back restores all their personal settings but the error reappears. When we copied the old profile's folder structure into the new profile, many of the user settings
were restored (but not all, like Dreamweaver settings) but the error did not appear. We think that the system folders files (like AppData) weren't totally copied over so we're going to run another test using xcopy. We are rebooting between
logons to make sure all files are unlocked.
The laptops and computers are mainly 32bit, Win7 Enterprise running IE9 and Office 2010 Professional Plus, but there's a few 64bit machines as well. The SharePoint farm has 1 WFE, 1 App Server running search and CA, and a shared database server running SQL
2005 SP4. SharePoint is 64bit MOSS 2007 with the latest CU.
We've checked the logs on the client as well as on the server and there aren't any helpful entries. We've also run Process Monitor, also with no helpful entries. We're planning to run something like Fiddler next.
It's not everyone, because there are many people are accessing the SharePoint system and the same files. It is also not a permission thing, as we've tested by giving the users elevated permissions with no changes. One person experiencing
the errors is a Site Collection Admin. That same person ran a test where I coped a simple Excel file into a Document Library which contained a problem file. They were able to open it Read Only no problems that day, but the next day, the same
file gave them an error. In their case, they usually get a "xxx is not checked out" error and only occasionally get the "No connectivity with the server" error.
We've tried lots of things including:
Deleting IE cache
Deleting SharePoint Drafts and webcache folder contents
Running IE without add-ons
Upgrading and Downgrading IE
Uninstalling and re-installing IE
Reinstalling our SSL certs
Repairing Office
Removing and then adding back in the Microsoft Office "Microsoft SharePoint Foundation Support" Office Tool
Deleting all HKLM and HKLU Office registry settings
Toggling IE Compatibility Settings
Toggling the IE Automatic Logon option
Toggling the location of checked out files
Adding the site in the trusted sites list
Adding the site to the WebClient\Parameters registry locations
Making sure the WebClient service is started
Rebooting the machine (lol :)
This is becoming a serious issue, not just because of the inconvenience for the users having to check out every document they want to read, but we have some files with macros that open up other documents to run which are now failing. There aren't
"check out" workarounds for some of those macros.
We're planning to open a ticket with Microsoft, but I'm throwing it out here first in case someone has run into this before, or may have some suggestions on what to try next. Thanks!
-Richard.
PS I think this needs to be in the "General" forum instead?It took three days of dedicated troubleshooting, but I have found the cause of the errors, and a couple of fixes. It helped tremendously that my own machine was throwing the error. I have scheduled a couple of users to work with me to test the
various fixes, to see which one works best, so the story isn't over yet.
I had backed up my c:\users profile folder and HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList registry key so I could restore my profile after I was done. I made a copy of the profile folder and was using that for awhile,
but then made another copy where I had deleted a lot of content out of it so that the copies would go faster. Since a newly created profile did not have errors, I was trying to copy back as much of the profile as possible to make it easier for our users
to get back to work. Instead of blowing away their profile and starting from scratch (which we know worked) I wanted to narrow down what was causing the error and just skip that from the restore. The concept was to keep as much as the users profile
in tact (application settings, etc.) not just restoring their desktop and My Documents folders.
When we first tested a few weeks ago, simply copying the folder contents didn't reproduce the error. I then tried xcopy, but got the "can't read file" error. Then I tried robocopy, and ran into the "junction" problem.
I went back to xcopy, and found that placing the excludes.txt file in the windows/system32 folder eliminated the error.
So the process went as follows:
Reboot and log into the machine as another user
Delete the profile and associated registry key
Reboot and log into the machine as the affected user, creating a new profile, and there is no error
Reboot and log in as the other user
xcopy the contents of the skinned-down backed-up profile to the newly created profile
Reboot and log in as the affected user, and the error occurs
Repeat the above, but add items in the excludes.txt file to see what, when eliminated, causes the error not to appear in the last step
I eventually found that skipping the c:\users\<profile folder>\appdata\local\Microsoft\office\14.0 folder allowed the entire profile to be copied over without the error occurring. That was strange, because we've cleaned out the cache folders
before which didn't fix the issue.
So I went about it the opposite way, and tried to delete the 14.0 folder from the restored profile, and after reboot, the error still occurred.
What eventually worked was deleting the 14.0 folder and copying over a 14.0 folder from a newly created profile!
One way to do this was to:
Reboot and log in as another user
Rename the c:\users profile folder
Rename the appropriate [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList] registry key
Reboot and log in as the affected user, confirm that there is no error
Reboot and log in as the other user
Copy the C:\Users\<profile folder>\AppData\Local\microsoft\Office\14.0 folder to the other user's desktop
Delete new profile folder, and rename the backup to be the production folder
Delete the C:\Users\<profile folder>\AppData\Local\microsoft\Office\14.0 folder and then paste the 14.0 copy from the desktop
Reboot and log in as the affected user, confirm that there is no error
We've tried this on a couple machines and it works. I had to run Windows Explorer as Administrator to access the other profile's folders.
We've also successfully copied a 14.0 folder created by one profile on one affected computer over another profile's folder on another computer, eliminating the error, so we're trying that first, as that is fewer steps.
We may attempt to script this, but the self-help instructions are only 5 lines long:
Reboot and log into the affected computer with another account
Go to <link to location of 14.0 folder on network> and copy the 14.0 folder
Run Windows Explorer as Administrator
Go to c:\users\<profile folder>\appdata\local\microsoft\office and delete the 14.0 folder, and paste the copied 14.0 folder (trying to overwrite it makes Win7 want to merge the folders)
Reboot and log into your normal account, and confirm the error is gone
I'll come back and report after we go into the field with this fix, but after the few tests, I am cautiously optimistic that this is it. -
How to add a search help for a field in Screen Personas?
I just started learning to use a Screen Personas, and I want to know how to add a search help for a field.
I found a property in the help document named "IsLookupSupported". Is it the key? But I saw it was gray in the field I created, and its value is "false". I could not change it.Hi, Tamas,
I found the reason. The function Z_WEBRFC_READ_DATA_SH had a string concatenation error.
CONCATENATE '{"results":[{"key": "shlpname", "value": "' l_shlp '"},"key": "fieldname", "value": "' l_field '"}]}' INTO htmldoc-line.
The correct code is like:
CONCATENATE '{"results":[{"key": "shlpname", "value": "' l_shlp '"},{"key": "fieldname", "value": "' l_field '"}]}' INTO htmldoc-line.
Another question is, I can't get any words in Chinese from WebRFC. It returns error when I try it. How can I configure it?
Xin
Maybe you are looking for
-
How can I create a temporary password for a user?
I often have to reset passwords for users who forget their passwords. Is there a way, in Mac OS X Server 10.6, to reset the password to a temporary password and then require the user to change passwords on login? (Not for a new user- I've found tha
-
how to auto hide bookmarks side bar
-
Ok my virus protection, I use Kaspersky, is detecting a packer every time I try to load Farmville on Facebook. This results in the game reloading over and over again. These pop up quickly with about blank in the address but nothing else. The path for
-
ICloud not usable as general storage device?
I was a big fan of iDisk, then it changed to iCloud. Without reading much about it, I thought when they said it was changing, it would be for the better, and like an idiot I just paid the $100 and went with it. I actually NEED to use it to transfer s
-
Hi there, I have uploaded all my Muse files and folders as HTML via Cpanel and made sure they are all there via FTP and they are, now I get this error when I look at the website live: "MuseJSAssert: Error calling selector function:TypeError: 'undefin