Evaluate, Time Sync, and merge 2 arrays into 1

I have two separate text files I am reading in to be processed within
Labview. I read these two files in and convert them each into 2D
arrays. What I need to do is to evaluate these files and syncronize
times which are in the first column line by line. If they are
syncronized then I need to merge them into one array. Here is an
example of where I am at.
1st array
20-Feb-04 10:23:02 32.543 54.654
20-Feb-04 10:24:04 33.564 34.765
2nd array
20-Feb-04 10:23:57 45.543 24.654
20-Feb-04 10:24:56 71.564 22.765
How can I do this? I am sure there is some simple solution, I just
can't find it. The other thing that I need to do is this. Sometimes
the
times match in the same column, but are just off by the seconds.
Here is an example:
20-Feb-04 10:23:04 45.543 24.654
20-Feb-04 10:23:54 71.564 22.765
I need to throw out the second one. Basically I need to ignore the
seconds and just look at the hour and minute. I am trying to figure
out if I simply can evaluate each file, look for duplicates and delete
the second one, or compare them against each other. Any help would be
appreciated. Here are the files also to show you what I have thus
far.
Attachments:
Merge1.vi ‏61 KB
log.txt ‏26 KB
Velocity1Test.txt ‏16 KB

Hello,
I quickly created an .llb that contains the vi's you would need to perform these operations. From your description above, I took the two arrays that you have created, removed duplicates (hour/minute matching), and then appended the data from the second array to the corresponding data in the first array, based on the time stamp. I have included comments in these vi's to help you understand the algorithms I used. Also, in order to do the time stamp comparison, I just took the two times as strings, removed the seconds, and compared those values. I hope this helps. Let me know if you have any more questions! Good luck!
Jeremy L.
National Instruments
Jeremy L.
National Instruments
Attachments:
Merge_Data.llb ‏93 KB

Similar Messages

Aperture 3 - Syncing and Merging Laptop and Desktop - Finally?

I've been waiting for this forever! I downloaded the new version this morning, and can't find anything in the user manual or in the Apple topics about how to do this......... can anyone help?
From Macworld review.... "A photographer with a MacBook Pro on a remote photo shoot can start with a fresh library and import it into his or her master library upon returning home. More impressively, Aperture will sync and merge libraries: photographers can export a portion of their libraries to a laptop, take it on the road to do work, and then bring that library back home. Aperture will detect what’s changed and sync only the changes back to the master library."
Source http://www.macworld.com/article/146231/2010/02/aperture3.html?lsrc=twt_jsnell

SuzanneT wrote:
I've been waiting for this forever! I downloaded the new version this morning, and can't find anything in the user manual or in the Apple topics about how to do this......... can anyone help?
From Macworld review.... "A photographer with a MacBook Pro on a remote photo shoot can start with a fresh library and import it into his or her master library upon returning home. More impressively, Aperture will sync and merge libraries: photographers can export a portion of their libraries to a laptop, take it on the road to do work, and then bring that library back home. Aperture will detect what’s changed and sync only the changes back to the master library."
Source http://www.macworld.com/article/146231/2010/02/aperture3.html?lsrc=twt_jsnell
I have the same question and found this site to explain some of the crucial points in both merging and syncing. I hope it helps.
http://photo.rwboyer.com/2010/02/13/aperture-3-new-project-import-export-and-mer ging/

Sync and merge clips, proper ways and tips please

Hi
Im working on a indie feature and need help with sync and merging clips. So far from my trials Premiere doesn't really sync that well based on audio (plus it doesn't seem to sync more then one set of clips at a time), luckily I have Pluraleyes that syncs in a breeze so that's what I'm using. So, my questions:
1) How do I merge more then one set of clips simultaneously. Look at my timeline. This is from only 3 days of shooting (and we've shoot for 33 days). It will take me forever to merge these...
2) How do I merge clips so they end up in a specific bin in the project panel. Now when I do it the new merged clip ends up at root which is manageable but annoying.
Can someone confirm if this is actually how you work, very laborious or am I missing something?
Thanks!

I'm dealing with the same issue, and would love to know how you've solved this problem, assuming that you kept this same workflow going.

How can I select rows of cells and merge them vertically into one cell in each column?

I'm working in CS4 and need to be able to select 2 to 6 rows of cells (with many columns) in a table and then merge the selected cells vertically into one cell in each column. A few cells in the chart will not need to merge so I must select the ones that do. I have almost 100 pages of charts with cells that need merged this way by Tuesday. Please help!
Top chart example needs to change to the bottom example.
Header 1
Header 2
Header 3
Header 4
Header 5
Header 6
100
600
300
600
20000
120000
2000
500
400
50000
10000
5000
3000
200
700
67
122
600
900
100
2
7
123
1110
Header 1
Header 2
Header 3
Header 4
Header 5
Header 6
100
500
200
100
600
400
700
900
300
5000
30000
2
600
10000
67
7
20000
2000
122
123
120000
5000
600
1110

SmartCellMerge may help you:
http://www.indiscripts.com/post/2012/04/improve-the-way-you-merge-cells-in-indesign
@+
Marc

IPhone syncing and merging

I recently upgraded to iTunes 9 and the iTunes on my Macbook no longer recognizes the iPhone. I would like to replace the music on the iPhone, but I need to be able to transfer my purchased Apps that are on the iPhone to iTunes. I also need to keep my notes, contacts, and calendar that are on my iPhone and not on iTunes. It would also be nice to keep my text messages. I'm currently backing up the iPhone as it is now without syncing it, and I know I can merge the calendar dates (or at least I could on an older iTunes version) but what do I do about the rest?

The restore did not allow iTunes to recognize it considering it restored it to a point where iTunes did not recognize it. I do not have a very recent backup of the iPhone. Even if I had a back up from a day ago it would still not recognize the phone because iTunes 9 deleted my entire library and I had to reload everything, making it seem like it was a different library. If Apple would just allow Authorized Computers to MERGE data with the authorized iPhone, then I wouldn't be in the predicament. Oh, and I wouldn't even have to do that if Apple had properly tested the update before sending it out. There is always something Apple manages to screw up in its updates.

Understanding grouped contact syncing and merging

New to iPads here. I have a personal Gmail account for my friends and family that syncs to my ipad.
Now I have a second Gmail account for a volunteer organization with all the members. What I would like is a way to keep each of my 2 Google account contacts synced separately- not merge them between accounts. I can't figure out what will happen.
What will happen if I turn on the Contacts for the Volunteer Gmail account? Will the iPad's auto-sync merge my Personal Google contacts with my Volunteer Google contacts? I do NOT want all the contacts merged (synced) between both of the accounts.
I want to keep my personal Google contacts synced with my personal Google account and my volunteer contacts synced with my volunteer Google account.
TIA

Setup both accounts and they will remain as separate accounts. They will not merge.
Although both sets of contacts will appear in the Contacts app, they will stay separate.
It's not actually possible to merge contacts from multiple accounts, so there's no worry that that may happen. Although you can choose to view all contacts together in the Contacts app.

Apple TV, Time Capsule, and my epic degeneration into madness...

Hey looking for some help...
So I've been holding off on updating the Apple TV I got for Christmas last year since reading about people's update woes. Seemed to be fixed so I went ahead and tried to update yesterday (11-18-13). The black screen came up saying it would take hours but it took about 15 minutes then right before the install stage it said can't update try again later. Oh well whatever right so I went to watch Netflix and it said it couldn't access Netflix at all. The. It said I needed to turn on home sharing to access files, I turned it off and then back on on my MacBook Pro and it wouldn't connect to that either. So I tried to update again and right away it couldn't connect to the store. Now I just got a time capsule last week and everything else is running fine off from it. Two iPhone 5's a brand new MacBook Air, a MacBook pro, our printer, and an iPad, so I don't think that's the issue. However after being upset and letting it fester I tried to go I to the apple menu and do a restore on the Apple TV, it could connect to restore, so I reset all the settings back to factory and it recognizes that there is a wireless network the name pops up but when chosen it asks me to sign in to the iTunes Store and can't connect. I tried to test the network and it said it couldn't run tests. This is affecting my netflixing ability for certain. Does anyone out there have some idea what to do? Thank you!!
MacBook Pro (13-inch Late 2011), iOS 7.0.3

Sounds like the update failed and nerfed it.
You will need a micro-USB cable but try restoring via iTunes.
Follow the steps in the If your Apple TV still does not respond or if you were unable to follow the above steps section of this article.
Apple TV (2nd and 3rd generation): Restoring your Apple TV
This will download and reinstall iOS.
That will get you up to date and hopefully resolve the issue.

Attempting 1st time sync and software duplicates first name as middle name

I am attempting my 1st sync between my Blackberry Pearl 8130 device and my Microsoft Outlook. When I do this the software is automatically duplicating the first name of many of my contacts and then proceeding to add the same first name to the middle name as well. Is there a way for me to synchronize my Blackberry device without adding these incorrect duplicate middle names? If not, is there a simple way to edit anything in the synchronization process, and if so how?
Thanks!

Thanks for your reply, but this script will result in the format "John Quincy"
I need a script that will result in the following format: "John Q.".
The script will need to extract the middle initial (first character) of the "EMP_MiddleName" field.

How to change the image into byte and byte array into image

now i am developing one project. i want change the image into byte array and then byte array into image.

FileInputStream is = new FileInputStream(file);
byte[] result = IOUtils.toByteArray(is);
with apache common IO lib

Contacts Sync and Turning Off Contacts

iPhone 5, latest iOS
iTunes and iPhone set for WiFi sync and both are logged into iCloud.
PROBLEM: Changes to iPhone contacts never seem to sync. When I attempt to turn off Contacts under iPhone, choosing to keep contacts on phone, I receive a message that it's "Turning Off Contacts ...".
This never goes away, and I have to for the Contacts app to quit.
Any ideas on how I can fix this issue?

Thanks for the quick reply.
So, followed your suggestions. First thing I noticed was that after deleting data from iPhone, contacts were still on my iPhone. Not sure how to delete contacts all at once, so that's another question.
Second, I logged back in to iCloud after deleting the iCloud account as you recommended. After doing so, I turned Contacts back on ... and it started ... and asked to Merge which I did. No joy.
I did back up from MacBook Air Contacts app first, but it appears I am confused about iCloud and On My Mac.
I now show no iCloud contacts even though I've now reimported the backup contacts into my laptop's Contacts.
Unless iCloud is way way behind in syncing at the moment, I have nothing in iClould contacts now.

Merging a collection into a table

I have a table with some blank columns.
I take all the data from the table in a collection and then process the data to fill those empty columns.
Now i have the collection with all the valid data.
Is it possible to cast this same collection into a table and merge it again into the original table?
I am trying to do so, but there is an error saying "cant use local collection"...
Any help on this would be appreciated.

Thanks a lot for your suggestion.
I would like to give you an elaborate process.
I have a table ABC. Some columns of that table are empty. I need to get those filled using some other tables.
Firstly, using a cursor I fetch the records in a collection say V_ABC.
Now in a FOR loop, I am fetching the missing data from other tables for every record in the collection and setting it in the empty places in the collection V_ABC itself.
So finally i have the collection V_ABC which has complete data.
The FOR loop is now ended.
Now i try to merge this V_ABC into tale ABC like this:
MERGE INTO ABC abc
USING TABLE(CAST(V_ABC AS TT_ABC)) z
ON (abc.random_column_name = z.random_column_name)
WHEN MATCHED THEN
UPDATE
SET abc.initially_empty_column = z.initially_empty_column
The exact error is "Error: PLS-00642: local collection types not allowed in SQL statements".
I am forced to use PL-SQL because of performance issues.
Could you provide an alternate way?
I guess one way would be to create another empty collection and EXTENDing it and creating a replica of V_ABC. Then probably it will allow me to merge. But i m not sure.

I don't use sync and am not signed in? Why are my bookmarks syncing?

My office computer has one set of bookmarks I use at work. My home PC has another, different set of bookmarks that I use at home. I don't use sync and am not signed into sync on either PC. Why are my bookmarks syncing between the two PCs? For instance, I noticed several bookmarks near the top of my bookmark menu above a separator line that I do not use at work. I deleted them. I get home and find those same bookmarks gone from my home PC. I don't want to sync anything between the two computers, why is this happening?

Perhaps an add-on is syncing these for you.
The Refresh feature (called "Reset" in older Firefox versions) can fix many issues by restoring Firefox to its factory default state while saving your bookmarks, history, passwords, cookies, and other essential information.
'''''Note:''' When you use this feature, you will lose any extensions, toolbar customizations, and some preferences.'' See the [[Refresh Firefox - reset add-ons and settings]] article for more information.
To Refresh Firefox:
# Open the Troubleshooting Information page using one of these methods:
#*Click the menu button [[Image:New Fx Menu]], click help [[Image:Help-29]] and select ''Troubleshooting Information''. A new tab containing your troubleshooting information should open.
#*If you're unable to access the Help menu, type '''about:support''' in your address bar to bring up the Troubleshooting Information page.
#At the top right corner of the page, you should see a button that says "Refresh Firefox" ("Reset Firefox" in older Firefox versions). Click on it.
#Firefox will close. After the refresh process is completed, Firefox will show a window with the information that is imported.
#Click Finish and Firefox will reopen.
Did this fix the problem? Please report back to us!
Thank you.

After updating to the ios5, my ipad keeps restoring when i plug it into itunes. I can't sync it or anything, and it has been restored about 20 times today and i can't get any further than that. Please help!

After updating to iOS 5 today, i was able to get my iphone working with virtually no problem. The issue i am having is that after i finished with my phone, i tryied to do the same with my ipad. Everytime it is plugged into itunes, it keeps saying it needs to restore over and over again. I have done this about 20 times today and have lost it. I can't sync anything with it, especially my music or calendars. Anyone know of a solution?

This will fix it
http://support.apple.com/kb/HT1212

How do I create a 1d array that takes a single calculation and insert the result into the first row and then the next calculation the next time the loop passes that point and puts the results in thsecond row and so on until the loop is exited.

The attached file is work inprogress, with some dummy data sp that I can test it out without having to connect to equipment.
The second tab is the one that I am having the problem with. the output array from the replace element appears to be starting at the index position of 1 rather than 0 but that is ok it is still show that the new data is placed in incrementing element locations. However the main array that I am trying to build that is suppose to take each new calculation and place it in the next index(row) does not ap
pear to be working or at least I am not getting any indication on the inidcator.
Basically what I am attempting to do is is gather some pulses from adevice for a minute, place the results for a calculation, so that it displays then do the same again the next minute, but put these result in the next row and so on until the specifiied time has expired and the loop exits. I need to have all results displayed and keep building the array(display until, the end of the test)Eventually I will have to include a min max section that displays the min and max values calculated, but that should be easy with the min max function.Actually I thought this should have been easy but, I gues I can not see the forest through the trees. Can any one help to slear this up for me.
Attachments:
regulation_tester_7_loops.vi ‏244 KB

I didn't really have time to dig in and understand your program in depth,
but I have a few tips for you that might things a bit easier:
- You use local variables excessively which really complicates things. Try
not to use them and it will make your life easier.
- If you flowchart the design (very similar to a dataflow diagram, keep in
mind!) you want to gather data, calculate a value from that data, store the
calculation in an array, and loop while the time is in a certain range. So
theres really not much need for a sequence as long as you get rid of the
local variables (sequences also complicate things)
- You loop again if timepassed+1 is still less than some constant. Rather
than messing with locals it seems so much easier to use a shiftregister (if
absolutely necessary) or in this case base it upon the number of iterations
of the loop. In this case it looks like "time passed" is the same thing as
the number of loop iterations, but I didn't check closely. There's an i
terminal in your whileloop to read for the number of iterations.
- After having simplified your design by eliminating unnecessary sequence
and local variables, you should be able to draw out the labview diagram.
Don't try to use the "insert into array" vis since theres no need. Each
iteration of your loop calculates a number which goes into the next position
of the array right? Pass your result outside the loop, and enable indexing
on the terminal so Labview automatically generates the array for you. If
your calculation is a function of previous data, then use a shift register
to keep previous values around.
I wish you luck. Post again if you have any questions. Without a more
detailed understanding of your task at hand it's kind of hard to post actual
code suggestions for you.
-joey
"nelsons" wrote in message
news:[email protected]...
> how do I create a 1d array that takes a single calculation and insert
> the result into the first row and then the next calculation the next
> time the loop passes that point and puts the results in thsecond row
> and so on until the loop is exited.
>
> The attached file is work inprogress, with some dummy data sp that I
> can test it out without having to connect to equipment.
> The second tab is the one that I am having the problem with. the
> output array from the replace element appears to be starting at the
> index position of 1 rather than 0 but that is ok it is still show that
> the new data is placed in incrementing element locations. However the
> main array that I am trying to build that is suppose to take each new
> calculation and place it in the next index(row) does not appear to be
> working or at least I am not getting any indication on the inidcator.
>
> Basically what I am attempting to do is is gather some pulses from
> adevice for a minute, place the results for a calculation, so that it
> displays then do the same again the next minute, but put these result
> in the next row and so on until the specifiied time has expired and
> the loop exits. I need to have all results displayed and keep building
> the array(display until, the end of the test)Eventually I will have to
> include a min max section that displays the min and max values
> calculated, but that should be easy with the min max function.Actually
> I thought this should have been easy but, I gues I can not see the
> forest through the trees. Can any one help to slear this up for me.

I bought a MAC for the first time and plugged my Itouch into it to download my music on it, but is says The iPod "Rick's IPOD" is synced with another iTunes library. An iPod can be synced with only one iTunes library at a time. What should I do?

I bought a MAC for the first time and plugged my Itouch into it to download my music on it, but is says The iPod “Rick's IPOD” is synced with another iTunes library. An iPod can be synced with only one iTunes library at a time. What should I do?

Same as you would if you bought a pc; copy everything from your old computer to your new one. Then you can just sync everything from the new computer, as you did with the old one.

Evaluate, Time Sync, and merge 2 arrays into 1

Similar Messages

Maybe you are looking for