Exchange Connector 9.1.1.1.0 -Support for multivalued attribute

Hi,
I am currently on OIM 9.1 BP07 + weblogic 10.3 + RHEL5.
Currently I have a mutlvalued attribute that needs to be reconciled, when I use OOTB reconciliation task i get column not found exception on child table which is configured to hold multivalued attribute.
1. Is OOTB exchange connector supports Multivalued attribute reconciliation?
2. If no, how can i populate the child form during custom reconciliation process?
Thanks

Hello,
This is the Berkeley DB forum. As such you can try your question in the General Database forum at:
General Database Discussions
Thanks,
Sandra

Similar Messages

Exchange Connector Setup: Could not establish trust relationship for the SSL/TLS secure channel

This may be more of a cert issue than an issue with SCSM, but here goes.
I am running into something new when creating an Exchange Connector (I swear its always something with this thing. Check the screen shot:
I can get to the service in IE, however there is a cert issue. Again, see the screen shot:
So it appears that the management server does not trust my Exchange cert, nor does it trust my root cert. I added the root CA cert to the management server snapin but still nothing.
If the root cert is under Trusted Root Certification Authorities, shouldn't it trust it? I'm not sure where to go from here?
- Get on the floor, do that dinosaur

Looking at that certificate path tab, it looks like this certificate is a self-signed certificate issued by the exchange server to the exchange server. is it safe to assume this is a lab environment? it's kinda rare for that to be left as-is in a production
exchange architecture.
If it is a self signed certificate (the Issuer and subject fields on the first page will be the same), then the only wat to trust it is to add that certificate to the trusted root certificate authorities under the system certificate store.
Here is an excellent tutorial on how to add certificates to the local machine trusted root store.
If this is a production environment, get with your exchange administrator, because you might be hitting the wrong CAS server, and getting the wrong certificate as a result.m

JSTL Expression Support For All Attributes

There are mentions of JSTL expression support for the
modelReference attribute within the specification (although I have found problems in the EA3 in this regard), but
but I did not find any mention of supporting the same for all
attributes. To me, this seems very important, especially for
attributes like "onClick" where I might want to do something special:
<c:foreach ...
<h:graphic_image modelReference="model.myImage" onClick="onDelete({status.index})"/>
</c:foreach>
In the case above, this would allow me to call a single javascript function that triggers a delete action based on the current index within a list based view.
There are many cases that I can think of that this would be incredibly useful.

maybe you have forgotten the $
onClick="onDelete(${status.index})"
or I've misunderstood something...

JAXB support for "any" attribute

I have a question related to JAXB.
Will JAXB be able to handle <xs:any minOccurs="0"/> Tag , when building the java classes. Will there be any defautl type to which this tag will be mapped.

Not the JAXB 1.0 included with JDeveloper 10.1.3.
JAXB 2.0 included with JDeveloper 11g supports xs:any.
Edited by: dvohra on Mar 12, 2009 10:59 AM

[faces] No support for "value" attribute of h:grap

I'm experimenting with NitroX for JSF and in trying to edit an existing JSF page (one created in Java Studio Creator), I discovered that the NitroX visual designer will not display the image unless the "url" attribute is used for the h:graphicImage tag. The spec says that "url" is an alias for the "value" tag, which appears to be the prefered tag. I'm surprised both aren't supported. Any plans for this in the future?

Yes, this is a known issue and should be fixed in the future.

SVG Support for Dataset Attribute

This is really a feature request, as I realize that the dataset attribute is only defined for HTML ( https://developer.mozilla.org/en-US/docs/Web/API/HTMLElement.dataset ) . But it would be very nice if that capability were extended into SVG as well, as it is for Safari and Chrome. For example, p.dataset.camelCasedName is understood by Firefox but svg.dataset.camelCasedName is not, returning the error message “TypeError: svg.dataset is undefined”. Safari and Chrome understand both.

hello aanderson, this is a primarily community-run support forum so it's probably not the right place to request features (we cannot implement any features & devs won't read here).
please either use https://input.mozilla.org/feedback for general feedback or if you feel that it's a missing feature in the browser file a bug at bugzilla.mozilla.org.

Localization support for Metadata/Attributes in WebCenter Content

Hi,
One of the Metadata/attributes for an WCC item is dDocTitle which can be supplied by user while creating the object in WCC.
Can the value of this metadata be localized for different locales?
TIA
-Nik

Yes, absolutely.
Actually, since you want to localize a standard metadata field, it will already be customized for you (just log in a different language). You might want to adjust the translation. There are several way how to achieve that:
a) the translation is defined in language files. It used to be .htm, but in 11g the file extension has been changed. A language file has a structure as follows:
<@key=translation@>, the keys mostly follow a pattern like wwXyz (e.g. wwDocTitle).
Unfortunately, sometimes the same string is displayed using keys - therefore, you need to find which key is the right one for a page you want to customize.
If you find it, you may want to create your own custom component with a html resource, where you can override the translation with your own strings. It is a bit trickier if you want to do it for several languages at once (then, the language is taken from the name of the file, or the key can be a bit more complex - you will find examples for that in your system)
b) Another way how to change the displayed label is a rule (profile). This can be useful, if you want to use the same metadata field differently in a different context (e.g. there is a field called "Address", but you want to display "Company Address" for company-related items, and "Personal Address" for person-related items)
c) (not relevant to your question) for custom fields you can also override the displayed label in Configuration Manager. If you want to have them localised, you will have to use a key and provide the translations.

Exchange Connector 3.0 (Hotfix Release) Error - Error Message=The key value of an object cannot be changed.

Hello,
I am running Service Manager 2012 with the Exchange Connector 3.0 RTM (Re-release Version). The issue I have is that when an e-mail is processed that is trying to update the status or event log of an incident, the Exchange Connector encounters an error
and will not update the object. The Operations Manager log denotes:
Exchange Connector: Unable to process mail item. Subject="Close Ticket: [IRXXXXX]", Error Message=The key value of an object cannot be changed.
This will happen on a seemingly random selection of Incident work items. I cannot correlate them with a specific template, exchange connector, or incident tier queue that could be causing the issue. I can recreate the way a specific ticket
was created and update it through e-mail without issue, and the next ticket can cause the error to trigger.
I have already opened a Microsoft Support Case using our Software Assurance agreement. After a few months of troubleshooting the issue and trying different fixes, Microsoft support said they were unable to fix the problem and that we would need to
purchase Premier support to go further. At this point I thought I would reach out to the community for ideas.
The setup I have for the Exchange connectors is as follows.
I have three separate Exchange connectors set up to three different mailboxes. One Exchange connector processes external support tickets and applies a specific template. Another processes client support tickets and applies a different template.
And the last Exchange connector processes internal tickets and also processes the updates of tickets created by the other two exchange connectors.
Here are the fixes I've attempted so far:
1. Changed the templates that each Exchange connector applies.
2. Changed the management pack that each template is stored in.
3. Checked my management pack(s) for extended classes by searching for Extension="true" (This was also checked by Microsoft support)
4. Deleted each Exchange connector and recreated each connector
5. Deleted each Exchange connector, deleted the management pack, and reinstalled the management pack and connectors
6. Repeated Step 5, deleted Microsoft.SystemCenter.ExchangeConnector.dll and Microsoft.SystemCenter.ExchangeConnector.resources.dll and then installed the Exchange connector Re-release version 3.0 Published 10/7/2013 (which is supposed to address this
issue)
7. Deleted the HealthServiceState folder and restarted the Management Service
I'm not really sure what to do at this point. I've put many hours into customizing my installation to get it working for my organization so reformatting and starting from scratch would be a nightmare scenario. This environment is in production.
I do have a band-aid in place using Orchestrator. Basically I have a monitor task searching for the error message and when it finds one it searches the mailbox for the offending e-mail and applies either the Resolve or Close status change that is requested
from the user. However, I do not have it working to update the ticket if a comment is applied to the incident. If anyone is in this position and needs to know how to apply this Orchestrator task I am willing to provide my workflow.
I am new to the community and am already impressed with the amount of help and effort there is in this forum. I appreciate in advance any help that is provided and am open to any ideas at this point. I can post more information as needed.
Thank you,
John

Yes that is the whole template. However, I did confirm that this is only happening to incidents where either of two situations triggers a runbook to fire and modify the incident. When I remove the activity from the incident it does clear the
issue. For some background the first Runbook Activity set's the first response date when an incident is resolved if the first response value is null. The second assigns the incident to a user upon creation if the title contains assignto:username;
1.)
<ObjectTemplate ID="Template.d33b5bbcaf3c49b18d8b72bc1e5e1ee4" TypeID="IncidentManagement!System.WorkItem.Incident.ProjectionType">
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/Escalated$">False</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/NeedsKnowledgeArticle$">False</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/HasCreatedKnowledgeArticle$">False</Property>
<Object Path="$Context/Path[Relationship='CustomSystem_WorkItem_Activity_Library!System.WorkItemContainsActivity' TypeConstraint='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity']$">
<Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/RunbookId$">4085f0da-ab83-48e5-bbe3-1f3b5fa2dc4a</Property>
<Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/TemplateId$">Template.d33b5bbcaf3c49b18d8b72bc1e5e1ee4</Property>
<Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/IsReadyForAutomation$">True</Property>
<Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/PropertyMapping$"><?xml version="1.0" encoding="utf-16"?>
<ParameterMapping xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<ParameterList>
<RunbookParameterItem>
<Name>Get RA Guid</Name>
<Id>344b15effc1a44528e517c5b4227179c</Id>
<Type>String</Type>
<Value>Generic::Id</Value>
<Direction>In</Direction>
<ContextInfo />
</RunbookParameterItem>
</ParameterList>
<RunbookId>4085f0da-ab83-48e5-bbe3-1f3b5fa2dc4a</RunbookId>
</ParameterMapping></Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Activity_Library!System.WorkItem.Activity']/ChildId$">1906</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Activity_Library!System.WorkItem.Activity']/Status$">$MPElement[Name='CustomSystem_WorkItem_Activity_Library!ActivityStatusEnum.Active']$</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Activity_Library!System.WorkItem.Activity']/Skip$">False</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Library!System.WorkItem']/Title$">Set First Response on Resolve</Property>
</Object>
</ObjectTemplate>
2.)
<ObjectTemplate ID="Template.b311e1f9126e4e19bbbbeb65ddb220ba" TypeID="IncidentManagement!System.WorkItem.Incident.ProjectionType">
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/Escalated$">False</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/Status$">$MPElement[Name='CustomSystem_WorkItem_Incident_Library!IncidentStatusEnum.Active']$</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/NeedsKnowledgeArticle$">False</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/HasCreatedKnowledgeArticle$">False</Property>
<Object Path="$Context/Path[Relationship='CustomSystem_WorkItem_Activity_Library!System.WorkItemContainsActivity' TypeConstraint='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity']$">
<Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/RunbookId$">ca88b13b-861a-4d39-a3cb-fd912d951e35</Property>
<Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/TemplateId$">Template.b311e1f9126e4e19bbbbeb65ddb220ba</Property>
<Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/IsReadyForAutomation$">True</Property>
<Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/PropertyMapping$"><?xml version="1.0" encoding="utf-16"?>
<ParameterMapping xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<ParameterList>
<RunbookParameterItem>
<Name>RA Activity GUID</Name>
<Id>5677d117a0294a2c898a695032f26c72</Id>
<Type>String</Type>
<Value>Generic::Id</Value>
<Direction>In</Direction>
<ContextInfo />
</RunbookParameterItem>
</ParameterList>
<RunbookId>ca88b13b-861a-4d39-a3cb-fd912d951e35</RunbookId>
</ParameterMapping></Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Activity_Library!System.WorkItem.Activity']/ChildId$">1120</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Activity_Library!System.WorkItem.Activity']/Status$">$MPElement[Name='CustomSystem_WorkItem_Activity_Library!ActivityStatusEnum.Active']$</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Activity_Library!System.WorkItem.Activity']/Skip$">False</Property>
<Property Path="$Context/Property[Type='WorkItem!System.WorkItem']/Title$">Execute Orchestrator IR - Autoassign</Property>
</Object>
</ObjectTemplate>

Custom Script Execution with 11.1.1.5.0 Exchange Connector

Folks ,
We would be cloning the 11.1.1.5.0 Exchange connector to support 2 different kind of mailboxes in Exchange server 2010 SP2.
The 2 kinds of mailboxes are Personal mailbox and a reference mailbox (similar like a personal mailbox , the only difference is that Auto-reply will be set on this mailbox).
OOTB Exchange connector will be used to create both of these mailboxes . However we want to set auto-reply only on reference mailbox using a powershell cmdlet
http://technet.microsoft.com/en-us/library/dd638217.aspx
So i would like to understand , does the connector provide such a capability to execute a cmdlet from a provisioning process via a process task or some other mechanism .
Thanks
Sid

Thanks Rahul , I have gone through the documentation .
But i dont understand , when doc mentiona you can execute a script before/after a user is created , so is this based on the event on the target after/before a mailbox is created or its triggerd from the create user task in OIM .
As i have 2 clones of exchange connector and both create mailboxes, i want invoke the script in 1 scenario and dont want to execute the script in other scenario .
thanks
Sid

Exchange connector stops working after patching?

our service manager exchange connector stopped working after patching that we performed on wed.
When starting or stopping the exchange connector we get this info in the Operations manager log file.
Error importing solutions. Error message:Management Pack [Microsoft.EnterpriseManagement.ServiceManager.Connector.AD,d43c3091-62c2-6404-607d-4376e592a89b] already imported.
Management Pack [Microsoft.EnterpriseManagement.ServiceManager.Connector.Sms,f772aa89-b934-2fac-4f37-5e0165d390ec] already imported.
Management Pack [Microsoft.SystemCenter.ConfigurationManager.Connector.PowerManagement,a070249c-6b56-37b8-d52c-a2906a63f9fc] already imported.
Management Pack [Microsoft.EnterpriseManagement.ServiceManager.Connector.Sms2011,fbea6f5a-838d-25a2-20af-fc21eb0b6706] already imported.
Management Pack [Microsoft.SystemCenter.ConfigurationManager2011.Connector.PowerManagement,bc23ed54-a33a-f608-05a9-c1f292140d2e] already imported.
Has anybody else seen this? Any suggestions?
Thanks Lance

Hi,
Did you try to restart SCSM's services?
If this doesn't help, I would try to delete and recreate the connectors.
More info:
System Center Service Manager Connector 3.0 for Exchange
http://www.microsoft.com/en-us/download/details.aspx?id=38791
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

GW2k3 Exchange connector smtp addressing

Hello all.
I am having some trouble with the exchange connector for Groupwise 7 to exchange 2k3.
What we want to do may be a bit strange and I'm not sure if the connector will even allow us to do this.
We would like to use the connector to sync users between AD and Groupwise however we do not want the connector to handle the mail routing between the systems. What we would like it to do is use the SMTP addresses ([email protected]) instead of the GWISE:Domain.po.username address.
On the Groupwise side of things this seems to have been very easy to setup we just went to the external domain and selected internet addressing and specified that we wanted it to use the [email protected] However the exchange side is proving to be more of a challenge. We have tried setting the recipient policies to use the SMTP address as a primary however the imported contacts inside of outlook still list the primary email address as GWISE:domain.po.username. If we try to remove the GWISE address from the imported users it says that this is the home address of the user and it cannot be removed.
Is there any way to not sync the GWISE address over to AD and just use SMTP? Or is there a way to sync GWISE address but use the SMTP as the primary for all imported users?
If anyone has attempted this or something similar any help would be appreciated.

The whole purpose of the gateway is to route email between the systems.
The addressbook visibility is provided to support this purpose.
If you are just trying to email addressing, then I believe you would
accomplish what you seem to be trying to do by setting up an LDAP addres
book on exchange pointing to eDir, and the reverse in GW.
If you are actually wanting to sync users in both systems, you might want
to consider implementing an IDM.
-jt
On Fri, 13 Jun 2008 13:56:01 +0000, jvandrew wrote:
>
> jvandrew;1577862 Wrote:
>> Hello all.
>> I am having some trouble with the exchange connector for Groupwise 7 to
>> exchange 2k3.
>> What we want to do may be a bit strange and I'm not sure if the
>> connector will even allow us to do this.
>>
>> We would like to use the connector to sync users between AD and
>> Groupwise however we do not want the connector to handle the mail
>> routing between the systems. What we would like it to do is use the SMTP
>> addresses ([email protected]) instead of the GWISE:Domain.po.username
>> address.
>>
>> On the Groupwise side of things this seems to have been very easy to
>> setup we just went to the external domain and selected internet
>> addressing and specified that we wanted it to use the
>> [email protected]. However the exchange side is proving to
>> be more of a challenge. We have tried setting the recipient policies to
>> use the SMTP address as a primary however the imported contacts inside
>> of outlook still list the primary email address as
>> GWISE:domain.po.username. If we try to remove the GWISE address from the
>> imported users it says that this is the home address of the user and it
>> cannot be removed.
>>
>> Is there any way to not sync the GWISE address over to AD and just use
>> SMTP? Or is there a way to sync GWISE address but use the SMTP as the
>> primary for all imported users?
>>
>> If anyone has attempted this or something similar any help would be
>> appreciated.
>
> After further investigation what we are seeing is that the Target address
> inside of exchange is being set to the GWISE address. Is there anyway to
> specify in Exchange or the GroupWise connector to use a different target
> address value such as the SMTP address?

Exchange Connector adds Workflow user as related Item to Review Activity

We use Servcie Manager 2012 R2 with Exchange Connector 2.0
For some reason, the Exchange Connector adds the workflow user to the review activity as a related config item. The sender of the email would make sence, but the workflow user does not.
Does the Exchange Connector 3.0 Rerelease also add the workflow user?
Is there a possibility to avoid this behavior?
tia
Patrick Wahlmüller

Hi Patrik !
Never saw that before, what i can say is that the upgrade/change to Exchange COnnector 3.0 is easy low-risk and you add MS-Support possibilities for it.
Go for 3.0 !
R.

SCSM Exchange Connector not recognizing custom Service Request prefix

Hello,
We have an Orchestrator runbook that brings over "Projects" from our Financial system into Service Manager as Service Request. As a way to distinguish these as projects we changed the prefix from the default "SR" to "PT".
In all out testing everything worked fine until we installed the Exchange connector. It won't recognize any Service Request that starts with a different prefix than "SR" (defined in the system settings). Does anyone know of
a way to get the Exchange connector to recognize other prefixes?
Thanks

Hi,
The system uses the only prefix that defined in the settings. There's no way to add support for the second prefix in Microsoft Exchange Connector. But you can create your own custom connector with the required behavior.
Cheers,
Marat
Site: www.scutils.com Twitter:
LinkedIn:
Graveyard:

Where to download the Exchange connector 9.1.1.7 connector download

Hi all,
While I am tring to download the Exchange connector 9.1.1.7 for OIM 9.1.0.2 I am not able to find anywhere.
While looking in oracle website I am seeing only 11.1.1.5 version only.
can anyone please help me in this.
thanks,
Valli.

Login into support.oracle.com. Raise an SR for this. Oracle provides only latest connectors on its connector download website.
regards,
GP

Service Manager Exchange Connector error

We have a noticed a few of these errors show up for the exchange connector.
Exchange Connector: Unable to process mail item. Subject="[SR15902] this is another test", Error Message=The key value of an object cannot be changed.
We are using the latest version of the exchange connector (7.5.2017.6). We recently added a second management server on another machine and it also has the exchange connector there.
Any ideas why we would get this error? Thanks in advance.
Thanks Lance

Hi,
I would like to confirm did you use Exchange connector 3.0, if that is the case, please try the newest connector published recently.
Exchange connector 3.1 is published, would you please try it:
System Center Service Manager Connector 3.1 for Exchange
http://www.microsoft.com/en-us/download/details.aspx?id=45291
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Exchange Connector 9.1.1.1.0 -Support for multivalued attribute

Similar Messages

Maybe you are looking for