Excise Value to Upload in Material Cost.

Hi Guru's
Our requirement is to add all the excise value to material cost. For that we have created new pricing procedure and it works ok as far as basic and education cess loading into material but this does not work for Higher Education Cess. Apart from loading into material cost it also takes the amount in modvat clearing account.
Please guide us so that the Higher education cess amount does not hit into modvat clearing account but to behave same as basic or education cess.
Our tax procedure is formula based (TAXINJ)
Regards
Maninder

Hi,
Check your H.EduCess condition type in following path ,where we specify which condition type is used for which sort of tax
SPRO --> Logistics general > tax on Goods Movements>India > Condition-Based Excise Determination>Classify Condition Types
Also check G/L account for excise transaction.
SPRO --> Logistics general --> tax on Goods Movements --> India --> Account determination --> Specify G/L Accounts per Excise Transaction
Regards,
Biju K

Similar Messages

Freight value to add in material cost

HI.
I have freight condition FRA1 i which i ticked Accrual key in M/06,I have assigned FR6 account key to it in pricing.I don't want to calculate the tax on freight ,so i ticked statistics key in Pricing for Freight cond.(FRA1)
Then also freight value is not adding in material cost .
What would be the reason?
Please provide suitable solution.
Thanx & Regards

Hi,
Normally if you mention statistics for a condition, then the value will not add to material cost. You remove the statistics for the condition.
Also check for that condition type, have you maintained accrual check box.(tick mark for accrual inside condition type).
If you dont want to add frieght value for tax calculation, then give the step number accordingly.
Regards,
Prabu

CIN - Excise value posting for the material document

Hi,
We have assigned the routine 356(FV64A356) in the Pricing Procedure for Depot Sales where Service team issues components for the Service repair job through a Goods Issue(MIGO-261 Mvt Type) document.We are also able to create a excise invoice for the material document.
The flow is Service Order - Goods Issue - through resource related billing a DMR is generated for the labour as well as the Goods Issued(MIGO-261), from DMR a debit memo is raised to invoice the Customer.
The formula in the routing is, during the creation of Billing or Proforma document it picks up the excise value posted for the delivery if the excise has been posted,if the delivery is not found, then it continues with the excise value calculated in the sales order (DMR in this case)
Is there any way or any other routine "to check for the excise value posted for the delivery ,if the delivery is not found, then check for the material documents if any linked to DMR(through Service Order)".
Could anyone help in this regard.
Thanks,
Ramki.

Hi,
While creating the excise challan using J1IF01 you can see a excise invoice selection tab, Select the J1IF01 line item & click on this tab, here you can select the excise invoice from which the base amount will be determined.
Thanks & Regards,

Excise Value and Freight value should be add to material cost in the depot

Hi,
Can any one help me on my scenario?
We have depot concept my client requirement is excise Value and Freight value should be add to material cost (inventories at depot) in the depot
Thanks & Regards
KMR

Hi All,
In Depot Sale. This are the Excise Duty Passed on to the Customer BED, AED ECS, SHECS, Other then that its added to the material cost. Define a Pricing procedure for value added to the material cost in both Procurement & Sales base your problem will be solved.
Regards,
Pherasath

How to include Material Cost in the SD report

Hi,
I am working on Cube 0SD_C03 for the Sales and Distribution Report "Sales Contribution - Product Wise u2013 KPI" where I have to show the following information which are given below.
1. Total Sales Qty.
2. Total Sales Value
3. Total Material Cost
For third one I do not know how to include this in this SD report.
so please tell me about this if anybody has idea about this?

Hi Francisco,
Note:
your xml should only have
<URL>http://dbxserver.dbxprts.com:7778/pls/apex/f?p=134:1:::NO::P1_ID_CONSTANCIA:1183</URL>
Show me your sample XML , i can help you.
What is your expected output ? PDF or HTML ?
here it is.
option1:
If the XML data includes an element that contains a hyperlink , then you can use that element to create dynamic hyperlinks at runtime.
a. insert hyperlink from word menu
b. In the Type the file or Web page name field of the Insert Hyperlink dialog box, enter the following syntax:
c. {ELEMENT_NAME_WHICH_HAS_URL_LINK}
where ELEMENT_NAME_WHICH_HAS_URL_LINK is the xml data element name
option2:
create a form field, you can add it
<fo:basic-link external-destination="http://www.google..com">
<fo:inline text-decoration="underline">google Link</fo:inline>
</fo:basic-link>
or
<fo:basic-link external-destination="{ELEMENT_NAME}">
<fo:inline text-decoration="underline">google Link</fo:inline>
</fo:basic-link>
or
<fo:basic-link>
<xsl:attribute name="external-destination"><xsl:value-of select="ELEMENT_URL"/>
</xsl:attribute>
<xsl:value-of select="LINK_NAME"/>
</fo:basic-link>

Condition type to be loaded on Material cost after Taxes but shouldn't change Tax base Amount.

Customer requirement is that they want to deduct some amount after the Taxes (after BASB) &t load this amount value after taxes on Material cost (hence accrual KEY can't be used). but with the addition of this new condition type (for deduction) it shouldn't change the base amount for Tax condition type (BASB).
Basic Problem : new condition type value to be load on material (after taxes). but this condition value shouldn't change the Net price of PO(amount in BASB condition of Tax) so that base amount (BASB) of Tax procedure remain unchanged.
(Since it is to be loaded on material hence i cant use account key definitely. Also this cost to be loaded on material after taxes)
Ex -             PBXX =     100 base price
                 Freight =       20
   Tax base amnt =     120
               Tax (5%)=          6
                      Total =    126
     Other Charges=      10 (this 10 Rs amount in this condition type required to be loaded on material cost, at the same time this condition value shouldn't change the base amount for the Tax (BASB)
Please suggest (purpose is to load the deduction on material cost after Taxes & same time it shouldn't change the the amount after Tax base calculation)

Hi,
   Your condition type is without acrual flag in M/06. No acrual key is maintained in the MM pricing procedure.
   To achieve your requirement, maintain subtotal 6 against the condition type in your MM pricing procedure in M/08.
   Maintain the base type calc procedure as 362 against your BASB condition type in tax procedure. Keep the field blank for the tax condition type (VAT or CST / ED etc)
   Test the scenario again with a new PO. System will show the condition value in net amount field in PO, but the same wont be copied to BASB in tax procedure. Check the taxes pop up. Check the same and revert back.
Note: Similar requirement (not exact) for acrual conditions are mentioned in my doc: Tax Calculation on Freight - Different Scenarios You may refer it if required.
Regards,
AKPT

How to add the shipment costs in to material costs

Dear friends
I am implenting the transportation module.
In purchase process and STO processes, the client requirement is received material cost should be added with shipment cost.
I mean the material cost is 1000/-
The shipment cost is 100/-
Client Requirement: Freight liability should get loaded on the inventory being it is part of purchase cost.
Now the material cost: 1000+100
We are not entering the freight costs in PO.
We are creating the shipment cost documnets for calculating the ship.costs.
When we do the MIGO/Inbound delivery the system need to capture whole amount as a material cost.
With regards
Lakki

Dear Vinod,
Already i created the shipment cost document with reference to inbound delivey document.
Now the ship.cost value is 100/-
The material cost is 1000/-
But i want to show the accounting document for meterial document with 1100/-(Material cost and ship.cost)
But when we do the PGR, sys will generate the accounting document with material cost only, sys should not add the ship.cost. Because we didnot enter any ship.cost value in PO or delivery.
We are maintaining the ship.cost in saperate documents.
How to do that?
With regards
lakki

Excise Duties should be added to the material cost

Hi all,
Here my Client place comes under excise exception. Here they are not going to avail excise credit. Also there is no utilization. If the material is procured from outside then the vendor will charge the excise amount as he comes under excisable place. So in this case my client wants to track the excise duties paid on the materials and they want the register updation also. Meanwhile they want the excise duties to be added on the Material cost. So I have maintained J1ID settings for the materials & vendors also I have maintained FV11. Here in this case the excise duties are not adding up to material cost.
For Ex: I am procuring a Material ABC from a Vendor. My PO price will be 100.
Qty=1EA
PO Price=100
BED=16
Ecess=0.32
SEcess=0.16
In Normal case my Inventory cost of the material will be 100.
In this case my client wants to be 116.48 should be the material price and at the same time the 16,0.32&0.16 should post to the respective CENVAT Clearing account at the time of MIGO & MIRO.
Can anyone please suggest me how to handle this issue?

hi Manju
As i understood that your plant is in the area which is under Tax exempted. See you have two option from excise point of view.
1. Either mantain the conditions through FV11 and call the same in your PO through Tax code and country combination.
Mantain the J1ID and manatain material chapter id combination material type and the no of gr and credit allowed it will hit your excise register in migo while you do GR as per the material type mantained in J1ID. But here you cant add the duty amount to be get added on Material Value.
2. You mantain the condtion in the FV11 go for key combination tax code and country, inventorised condition type for eg JMIP inv BED condtion mantain the desirable rate their which would be 14% from now. Create PO with the suitable tax code and mantain J1ID AND DO THE GR IT WILL GET ADDED TO YOUR MATERIAL VALUE.
Also if you cant avail the credit on the output material you cant accumalate credit in your register also accumulated credit can't be carry forward in the next financial year.
Reward if usefull
Regards
Sujoy

Assign direct material cost to value field in copa while issue to Prod orde

Dear All,
My requirement is like this:
There are some 16 material groups from A to P each containing some materials(finished goods).
I want to allocate overhead to different material groups(Charecteristic in copa) in COPA using the periodic assesment cycles. I am able to allocate overhead(admin & sales cost) to different value fields in copa from different cost centers.
I want to analyse the product cost and also the profitability of each material group in COPA using Report painter. Iam able to pull all the costs which i assign to value fields using assessment. But, i am NOT able to get the direct material cost which is issued to production orders using BOM.
My question is whether we can assign the direct material cost to any user defined value field(material cost value field) while the material is being issued to production orders. Is there any automated way where we can directly assign the direct material cost to value field in copa while issuing the material to Production orders.
Pls explain me whether we can do it. if yes how?
Thank you very much in advance.
Regards,
Vishnu
VST-IT.

PA is a Profitability analysis tool. That means it gets updated when a sale is made, not before. (Except for settlements and assessment of overheads.)
Goods issues for production gets updated in CO-PC, and needs to be analysed there. If you don't, you loose all the inbuilt tools for variance analysis, cost estimate comparisons, Wip Calculation etc. To the best of my knowledge, a Profitability Segment cannot be used as a cost object in Production Planning, because amongst others, you need to be able to capitalise the produced materials to stock at the end of the production run, or to WIP at the end of the Financial period,which is not possible with PS.
Similarly, overheads are recorded in CCA and needs to be analysed there.
If one goes against these big groupings in SAP, you always run into problems.

Table used in Material cost value

Hi,
In Material cost estimation Cost Components views are Material Cost, Material Overhead, Subcontracting Charges, Conversion Cost and Total Cost. Material Cost is calculated based on Material price, Bom Qty, value put in KP26 i.e, fixed and variable pirce with combination of Cost Center and Activity type and processing hours, Labout hours from Routing. Total Cost appears with the combination of Material Cost and Conversion Cost . This Total Cost appears in costing view tab of Material Master and CKIS table. which table stored in Material Cost value. Kindly need your suggestion.
Regards,
Anindita

Hi A Roy
The tables are KEKO and KEPH....
In KEKO you will find prod costimation no against the combination of Plant/Material
Against this Prod Cst Est no, you will find the cost break up in KEPH table
Regards
Ajay M

Purchase Rebate is adding to Material cost value field

HI,
When i execute purchase rebate scenario, that amount is adding to Material cost value field in COPA report. Kindly tell me what isthe problem and where is the link between this.
Thanks
KB

In customizing the integration of other modules with COPA you have keep in mind the sign logic because it may be different for values coming from different modules.
Example: In our system revenue-reducing sales conditions come to COPA with a negative sign. In postings that come directly from FI to COPA, a negative sign means earnings. So we cannot assign any Fi account for direct posting to COPA to the same value field as SD conditions, because the sign logic doesn't match. We have to use different value fields and then get the formulas right in creating COPA reports to get the correct result in COPA.
I think your problem here is of the same kind: Rebates from purchase seem to come with the same sign as cost of goods sold AND go to the same value field, although one consitutes cost and the other a reduction in costs.
I think you have to get your rebates to post to another value field. Are those rebates an MM-condition or do they go to COPA through an assignment of FI-account to a value field?
Regards
Nikolas

Excise Values in MIGO For MPN Materials

Hello,
While capturing the excise invoice for the MPN materials system is not picking the excise values. We are using the TAXINN procedure and i have maintianed the condition records for the Key combination country/Plant/Control Code/Taxcode (WE have created a condtion table for this key combination) and we also maintained the MPN materials in the J1ID also but it is not picking the values in the item tab. Taxes are caluclated in the Purchase order.
Note:
For the MPN Materials we have only three views maintained in the material master and it is not extended to any of the plant.
I have noticed that if use the other tax code which i maintained the condition records for Conidtion table 651 (key Combination of Country/Tax Code) the excise values are flowing in MIGO but if i use the tax code EA (Condition table 652 Key Combination: country/Plant/Control Code/Taxcode) we are not getting the excise values in MIGO
Please let me know if there is any configuration is missing.
Regards,
Kumar Rayudu
Edited by: Kumar Rayudu on Oct 1, 2009 2:10 PM
Edited by: Kumar Rayudu on Oct 1, 2009 5:19 PM

>
cnranjith wrote:
> Dear all
>
> When doing MIGO for Import PO excise tab is not appearing for the material
>
> I have maintained all the data in J1ID for the material and plant
>
> already we use to capture EI for the same material and plant but this time this is creating issues
>
> We have posted an inoice of planned delivery costs but no excise tab in MIGO
>
> What might be the reason
First you have to post the Customs MIRO in case of import purchase...then go for MIGO...you will find excise tab will follow....
Regards,
Indranil

Wrong excise value is calculated in billing doc. = VF01.

Dear All ,
I have created a billing doc for a STO , now my price of 1 ton is Rs 57328.94 & in billing the Con for exc is JEXP it is for,14 % but the exc cal culating as Rs 8329.61 , instead of Rs 8026.05 here the wrong calculated Rs 8329.61 is 14.529 % of Rs 57328.94 .so i m in VF03 now selected the cond type & clicked on detail icon here what i see that the a screen opens for header cond. details , here in cond details tab the amount coming as 14 % , Cond base value is Zero & Cond value is Rs 57328.94 , After this on the same scren i had clikced on Go to -
> cond record --> here also 14 % is given then how the system is calculating 14.529 % instead of 14 % .
Rgds
sap12

in the STO under cond tab at item level i had clicked on analysis tab then the con appearing are as under --->
Condition type     Message     Description
P101     213     Amount copied from material valuation data
FRB1     207     Condition has been found (without condition record)
FRC1     207     Condition has been found (without condition record)
FRA1     207     Condition has been found (without condition record)
Y017     207     Condition has been found (without condition record)
Y018     207     Condition has been found (without condition record)
Y019     207     Condition has been found (without condition record)
Y020     207     Condition has been found (without condition record)
Y015     207     Condition has been found (without condition record)
Total Cost     200     Subtotal
Here there is no JEXP , now as u wrote thjat to check the excise rate in J1ID -
> there is no excise rate made for this material , after this ---> in exceptional exc rate there are no entries., now pl guide that what to check .
Rgds
sap12

Unit costing for materials assigned to activity - for material cost plannin

The requirement is that material cost to the company will vary depending upon the project/customer. Eg.: Material cost = basic material cost + a % for P&F + 2 % for Clearance + a % for excise + 2 % for insurance + a % for Customs
It can be a % or a lump-sum value. It can be all the components listed or part of them. This will be project specific.
Hence the following preference for material cost planning is required:
1. Material cost based on quotation or Purchase order - If quote/PO is not available, then
2.Material cost based on unit costing done for the material in the project - If this is not available, then
3. material cost from material master depending on price indicator i.e. Std cost or Moving average price
We are working with valuated project stock.
SAP Help says"
"Prices are calculated in one of the following ways:
u2022     Using the strategy in the valuation variant
u2022     Manually, using the invoicing plan
u2022     Using unit costing"
But how to get the cost as per the priority required when these three options are there is not clear.
I have tried to work with valuation variant in the costing variant assigned to Network. No valuation strategy explicitly refers to unit costing of material.
During various testings, at times, unit costing of material gets updated as planned cost; at times not. What triggers in also not clear.
Pl. clarify
Thanks and regards
A.Saravanan

Hi All
I have psoted to service market place and got the reply; we have implemented also.
there were 2 suggestiosn:
1. Valuation price with user exit - (EXIT_SAPLCK21_002) - This user exit has to be implemented; we have implemented - it is working. But this is taking effect when overhead calculation is done - this we rae managing that way now
2. Alternatively you can try to use BAdI VALUATION_CK.: This BADI is not editable by us now; SAP has not released for our editing!
The problem is solved although
There is one more clarification required:
As SAP Help documentation: -> Unit costing is used instead of strategy sequence, but not in between steps of strategy.
How to get this done ? right now we are using the strategy - inbetween steps of strategy with user exit
Thanks and regards
A.Saravanan

KE30 report is capturing Excise values

Hi Gurus,
In my pricing procedure I had used condition type VPRS & condition types for excise,education cess & higher education cess.
The same VPRS has been assigned to COPA value fields.
COPA actual line items shows 2 line items- (1) For Excise (2) Material Costs
showing separately.
But in COPA report (KE30) showing the total costs (Material costs+Excise Values).
In report also, we need material costs & not Excise values. Please guide.
Regards,
Balaji

Hi
In your SD invoice, go to financial documents and check the field values for each item or COPA document.
In KE30 you can merged in one field differents field values. You define the reports in KE30 usually with tcodes KE31/32/33 (and if you use forms for this reports you use KE34/35/36 or KE94/95/96 for line items). The worst that you can find is a form with formulas, hidden fields and so on.
My suggestion is that you look for a COPA consutant if you are not sure. You can use the tcode ORKE for COPA customizing.
Think that you have userexits (enhancement COPA++++) to populate characteristics, derivation rules and value fields.
If you need something, let me know. I hope this helps you
Regards
Eduardo

Excise Value to Upload in Material Cost.

Similar Messages

Maybe you are looking for