Export Server Configuration

Hi all,
is there a possibility to export a complete server configuration (SAP WAS Java 6.40 SP 15) which contains all configured Destinations, Datasources (and JDBC-driver), SLD Data Supplier, UME-LDAP and so on.
We want to define standard server configuration and roll it out to all developers to avoid error-prone configuration at the workplaces.
Thanks for help
Christian

Similar Messages

Export Server Configuration - MX6

I need step-by-step instruction on how to export configuration out of CF MX6 STANDARD edition. I've looked a the following link but couldn't locate topic for this information. http://help.adobe.com/en_US/ColdFusion/9.0/CFMLRef/index.html
Thanks in advance

Rick, the link you gave was to the CFML Reference. That won't help you at all in exporting server configurations.
Instead, that's a feature of the CF Admin, and so you'd want to look at the "Configuring and Administering CF" manual, and of course you'd want it for CF 6, not CF9. They're offered at http://www.adobe.com/support/documentation/en/coldfusion/documentation.html. Unfortunately, while the links to the PDFs there work, the links to the HTML versions do not, and sadly it can't even be found via the good ole "internet wayback machine":
But regardless, you'll face a different annoyance even if you find the docs, in that you say you're running CF Standard. That license of CF does not provide a way to export CF Admin settings. That's only an Enterprise feature, found in the Packaging & Deployment option on the left nav bar, for "ColdFusion Archives", which you won't even see in CF Standard.
But here's a trick, which if this is a production machine you should only do at an off hour, when you can stop your web site. If you remove your CF license key (from the "system information" page in the CF Admin), that will revert CF to "Developer" mode, which is the full Enterprise functionality--but limited to allowing only up to 3 IP addresses to connect to CF. That's why you need to not only do this at an off hour, but it would be best if you could stop your web sites, or at least all but that which you need to get to the CF Admin.
Then you can export the settings, and import them into another Enterprise or Developer edition of CF.
As for step-by-step instructions for the process of creating the archives (a car file), there are many out on the web, such as:
http://www.iknowkungfoo.com/blog/index.cfm/2008/4/5/Yo-Adrian-How-do-I-backup-my-ColdFusio n-Admin-settings
http://www.quackit.com/coldfusion/coldfusion_archive_and_deploy.cfm
or a simplified checklist at:
http://www.code-complete.com/code/index.php?/archives/21-Using-Coldfusion-Archives-to-migr ate-datasources.html
Hope that helps.
/charlie arehart
[email protected]
Providing on-demand troubleshooting services for CF and CFBuilder
at http://www.carehart.org/consulting

Using LDIFDE to Export/Import configuration

Hi All,
I need to create a "copy" of a domain using LDIFDE. To do that, I exported the Configuration, Schema, OUs, Users and Groups. I'm having plenty of troubles during the import, so I wanted to clarify a few things:
1) What order should the data be imported in? I was thinking importing Schema, then Configuration, then OUs, followed by Groups and finally Users
2) Is there an easy way to remove the extra spaces from the LDIFDE extract? I did a search and replace in notepad to change the domain from DC=abc,DC=com to DC=xyz,DC=com, but there are lines where the original DC is split which is a royal pain to clean
up!
3) When doing an import from Schema or Configuration, I get this error
PS C:\tmp> ldifde -i -f .\schema_export.ldf -v -j C:\tmp\
Connecting to "mydomain.xyz.com"
Logging in as current user using SSPI
Importing directory from file ".\schema_export.ldf"
Loading entries
1: CN=Schema,CN=Configuration,DC=xyz,DC=com
Add error on entry starting on line 1: Unwilling To Perform
The server side error is: 0x2079 The specified instance type is not valid.
The extended server error is:
00002079: SvcErr: DSID-03330968, problem 5003 (WILL_NOT_PERFORM), data 0
0 entries modified successfully.
An error has occurred in the program
I can't figure out why this is happening.
Any help will be much appreciated :)

> I need to create a "copy" of a domain using LDIFDE. To do that, I
> exported the Configuration, Schema, OUs, Users and Groups. I'm having
> plenty of troubles during the import, so I wanted to clarify a few things:
Why would you need to import schema and configuration? And why do you
not simply join a DC to your domain, take it down and do metadata
cleanup, then start this new DC in its own environment? Much simpler
than your approach, I believe :)
> 1) What order should the data be imported in? I was thinking importing
> Schema, then Configuration, then OUs, followed by Groups and finally Users
That's what I would think, too.
> 1: CN=Schema,CN=Configuration,DC=xyz,DC=com
> Add error on entry starting on line 1: Unwilling To Perform
"Add" for what? What's the content of this file?
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

Web server configuration failed with EPM 11.1.2.2 on Solaris 11

Hi,
When install & configured EPM 11.1.2.2, all components configuration success except web server configurations. In the
/export/epm/Middleware/EPMSystem11R1/diagnostics/logs/
[ERROR][EPMCFG-07236][oracle.EPMCFG][SRC_CLASS: com.hyperion.cis.config.ant.apache2.OHS2configurator]/export/epm/Middleware/user_projects/epmsystem1/httpConfig/ohs/config/OHS/ohs_component/httpd.conf wasn't found. OHS wasnt configured successfully, see oraInventory logs for more details"
The /export/epm has around 1.1T free disk space, and it had been set WRX permission for the 'epm' user. Please advise what might cause the above issue?
Thanks,
Jenny

Hi,
The OHS installation was showed as "Complete" in the EPM installation. Yes, there was "/export/epm/Middleware/user_projects/epmsystem1/httpConfig" directory.
Under "/export/epm/oraInventory/logs", it generated 4 files as "intsall*.log", "install*.out", "installActions*.log", and
"installProfile*.log" when I'm trying to configure the web server again with cfgtool. The logs are pretty long, and I'm not sure if the bellow messages indicate space problem or not in the "install*.log"?
[oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.genericQueries.getFreeSpaceForHome] [tid: 11] [ecid: 0000Jz5F64TFw000jzwkno1Hr7bm000002,0] errorString:
[2013-07-09T13:00:36.230-08:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.genericQueries.getFreeSpaceForHome] [tid: 11] [ecid: 0000Jz5F64TFw000jzwkno1Hr7bm000002,0] Exiting method executeHandler
[2013-07-09T13:00:36.231-08:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation] [tid: 11] [ecid: 0000Jz5F64TFw000jzwkno1Hr7bm000002,0] Handler launch end: genericQueries.getFreeSpaceForHome
[2013-07-09T13:00:36.231-08:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation] [tid: 11] [ecid: 0000Jz5F64TFw000jzwkno1Hr7bm000002,0] Handler returned status: SUCCES
The "install*.out" had the error message as:
[CONFIG] [Web Tier Configuration] [Create and Start AS Instance (ohsInstance3355595679)]:Skipping instance registration
ld.so.1: opmn: fatal: libcolntsh.sop.11.m1: open failed: No such filnctl startall: estarting opmn and all moracle.as.config.ProvisionException: Unable to start opmn
at oracle.as.install.webtiercd.webtierconfig.util.CreateASInstance.createASInstanceWrapper(CreateASInstance.java:153)
at oracle.as.install.webtiercd.webtierconfig.util.CreateASInstance.createStandaloneASInstance(CreateASInstance.java:84)
at oracle.as.install.webtiercd.webtierconfig.actions.WebtierConfigurationAction.configureInstanceStandalone(WebtierConfigurationAction.java:590)
at oracle.as.install.webtiercd.webtierconfig.actions.WebtierConfigurationAction.configureStandalone(WebtierConfigurationAction.java:441)
at oracle.as.install.webtiercd.webtierconfig.actions.WebtierConfigurationAction.doExecute(WebtierConfigurationAction.java:174)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:371)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:64)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:160)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
at java.lang.Thread.run(Thread.java:662)
Caused by: java.lang.Exception: Unable to start opmn
at oracle.as.install.webtiercd.webtierconfig.util.CreateASInstance.startOpmn(CreateASInstance.java:228)
at oracle.as.install.webtiercd.webtierconfig.util.CreateASInstance.createASInstanceWrapper(CreateASInstance.java:151)
... 13 more
a or directornage[CONFIG] FAILED:Create and Start AS Instance (ohsInstance3355595679)
y
d processes[CONFIG] [Web Tier Configuration] [Create and Start AS Instance (ohsInstance3355595679)]:Unable to start opmn
.[CONFIG] FAILED:Create and Start AS Instance (ohsInstance3355595679)
..Question Received:Unable to start opmn
[CONFIG] [Web Tier Configuration]:Unable to start opmn
oracle.as.config.ProvisionException: Unable to start opmn
at oracle.as.install.webtiercd.webtierconfig.util.CreateASInstance.createASInstanceWrapper(CreateASInstance.java:153)
at oracle.as.install.webtiercd.webtierconfig.util.CreateASInstance.createStandaloneASInstance(CreateASInstance.java:84)
at oracle.as.install.webtiercd.webtierconfig.actions.WebtierConfigurationAction.configureInstanceStandalone(WebtierConfigurationAction.java:590)
at oracle.as.install.webtiercd.webtierconfig.actions.WebtierConfigurationAction.configureStandalone(WebtierConfigurationAction.java:441)
at oracle.as.install.webtiercd.webtierconfig.actions.WebtierConfigurationAction.doExecute(WebtierConfigurationAction.java:174)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:371)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:64)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:160)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
at java.lang.Thread.run(Thread.java:662)
Caused by: java.lang.Exception: Unable to start opmn
at oracle.as.install.webtiercd.webtierconfig.util.CreateASInstance.startOpmn(CreateASInstance.java:228)
at oracle.as.install.webtiercd.webtierconfig.util.CreateASInstance.createASInstanceWrapper(CreateASInstance.java:151)
... 13 more
opmnctgetting all the checkpoint properties..
l startall: failed.m_checkpointData:{}
Configuration:Web Tier Configuration failed
Error while running Configuration.
The configuration of Oracle WebTier and Utilities CD failed.
outputFile:/export/epm/oraInventory/logs/installProfile2013-07-09_02-00-32PM.log
The "install*Profile*.log" reported:
Processor Architecture : sparcv9
#The cycle speed of the CPU
CPU Speed : 0.0 GHz
#This is the number of CPUs available to the installer's JVM
CPU Number : 512 Processors.
#Available Swap space on this machine when installer started
Available Swap Space : 0 MB.
Somehow, it report the cpu speed as 0hz, and swap space also 0MB, but I have lots of swap space available(630G) shown from 'df -h' and 'swap -s'
Thanks!

BP &C upgrade to version 7 failing, server configuration file missing.

Anyone,
When I run the version 7 Startup.exe, the only options are to Prepare or Other. I think the server configuration file is missing. Is there a way to create/recreate one without using the insight export feature (that appset is not installed or enabled).
Thanks in advance.

Your flame is not at all helpful. After digging into the problem for a couple hours I was able to discover EXACTLY what had happened.
Thank you
For everyone else, here is what the upgrade has done:
Under the "iTunes\iTunes Music" folder there used to be a "Downloads" folder that was deleted by the 7.0 upgrade.
It looks like this folder was used for the recovery of failed downloads, but the previous versions of iTunes were not managing this folder very well. There were several folders containing just 1 media file. Most of the media files were 0 bytes long, except for the 2 files that I had lost during the upgrade. Apparently, iTunes was using these 2 files. The upgrade to version 7.0 caused this folder to be deleted; thus the links were broken. Anyone else who had a failed download, in particular a video download, may have the same issue.

Start-msg: could not get server configuration in ldap

Hello,
I am trying to get iPlanet Messaging Server 5.2 Patch 1 running, but when I run start-msg
I get the following error message:
General Warning: could not get server configuration in ldap, using cached configuration information
Note: I created this system using a ufsdump and ufsrestore combination on the instance directory.
Other file systems were not copied over.
My guess is that something else may be missing?
I ran ns-slapd first before starting the messaging server.
Thanks in advance.
Tim

Thanks for the response. I have some followup
questions:
> I have done this with Messaging Server.
Several
things to do:
1. Go into Console, and change it there. Youneed
to change hostname and ip for admin server,Directory
server, and messaging server.
When I bring up the console, it asks for a user nameThe default user's name is "admin". The password was assigned during installation. You can also use, "cn=Mirectory Manager", but again, the password was assigned on install.
>
and password. Well, the admin quit and left no
documentation, so I don't have any idea on what to
use. Any ideas?
>
2. Edit your mappings file, to reflect the new ip
address.
Where is this mappings file?<install directory>/msg-<name of your server>/imta/config
>
> 3. Change the setting for "mailhost" for every
user
to reflect the new hostname. If you don't dothis,
nobody will get any mail.>
I interpret this to mean:
(1) use db2ldif and then use and editor to do a
global
search and replace on the mail hostname.yes
>
> It may turn out to be easier to "migrate" your
data,
rather than "fix" by changing hostname/ip.
to migrate:
install new application on new box, with correct
hostname/ip
Unfortunately, I tried this and did not have much
success. I gave up and went with
ufsdump/ufsrestore.That's very much the hard way. . .
>
> Use MoveUser to migrate users and mailboxes from
old
to new, or
Use imsbackup/imsrestore to move the mailboxes.
Export the data from ldap in ldif format, then usea
a text editor to change the mailhost value for all
the users, and then import that new data to thenew
directory server
I think I will have to do this anyways, right.
Assuming my new box is offline for a while and
users are still using the old box.You can certainly use imsbackup/imsrestore to move all new mails. . .

Migrate Project Server configurations

Hi,
I would like to export the configuration elements of Ms Project Server 2010 such as EPT, Custom Fields and Lookup from one environment(DEV) to another. I have used Playbook tool for migraition. However, Playbook doesn't work with https site.
Are there utilities, add-ons and approaches to migrate Ms Project Server elements across environments? I would appreciate any help in this regard.

Hello,
For Project Server 2010, Playbooks is the only free tool, others such as Fluent Pro are paid for. The other options you have if Playbooks is failing on your HTTPS site are:
Make PWA access via HTTP using Alternate Access Mapping
Write your own backup and restore tool
Migrate the whole Project Server data and config using the rollover approach.
http://pwmather.wordpress.com/2012/04/10/projectserver-2010-environment-rollover-steps-powershell-ps2010-msproject-sp2010/ - probably only suitable if you are going from Production to DEV etc.
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS |
MVP

ColdFusion 9 Web Server Configuration Tool problem

I am using:
ColdFusion 9.01
Oracle iPlanet Web Server 7.0.13
Windows 2008 R2 Standard
When I try to use the Web Server Configuration Tool, I get the following message:   warning "connectors/nsapi/intel-win64/prebuilt/jrun_nsapi.dll". Could it be an incompatability with the versions of software that I am using? Has anyone successfully configured ColdFusion 9.01 with Oracle iPlanet Web Server 7.0.13?
I can't get past this message (see below).
The wsconfig.log file has the following:
02/14 00:39:57 debug Parsing Sun ONE Web Server (iPlanet) configuration file G:\Program Files\Oracle\WebServer7\https-CFAdmin\config\magnus.conf
02/14 00:39:57 debug Parsing Sun ONE Web Server (iPlanet) configuration file G:\Program Files\Oracle\WebServer7\https-CFAdmin\config\obj.conf
02/14 00:39:57 error connectors/nsapi/intel-win64/prebuilt/jrun_nsapi.dll
java.io.FileNotFoundException: connectors/nsapi/intel-win64/prebuilt/jrun_nsapi.dll
    at jrunx.connectorinstaller.JarUtils.extractToFile(JarUtils.java:72)
    at jrunx.connectorinstaller.CIUtil.extractConnector(CIUtil.java:274)
    at jrunx.connectorinstaller.iPlanetInstaller.installConnector(iPlanetInstaller.java:136)
    at jrunx.connectorinstaller.ConnectorInstaller.installConnector(ConnectorInstaller.java:341)
    at jrunx.connectorinstaller.ConnectorInstaller.doIt(ConnectorInstaller.java:275)
    at jrunx.connectorinstaller.ConnectorInstaller.main(ConnectorInstaller.java:765)

I'm using Solaris 10 SPARC, iPlanet 7.0.15, and I'm not going to use Apache!
Note: I made a slight modification to the LD_LIBRARY_PATH_64 reference in the startup script for iPlanet.
You have to do this to make the virtual server use the 64-bit libraries.
vi /sun/webserver7/https-<config_name>/bin/startserv
look for this line:
    LD_LIBRARY_PATH_64="${SERVER_LIB_PATH_64}:${SERVER_JVM_LIBPATH}:${LD_LIBRARY_PATH_64}"; export LD_LIBRARY_PATH_64
and change it to this line:
    LD_LIBRARY_PATH_64="${SERVER_LIB_PATH_64}:${SERVER_JVM_LIBPATH}:${LD_LIBRARY_PATH_64}:/us r/sfw/lib/sparcv9"; export LD_LIBRARY_PATH_64
I'm moving from CF8 ENT to CF9 ENT.
Here's the problem: iPlanet virtual server is configured for 64-bit operation; the connector in CF9 is 32-bit.
Question: What Program is Making this file ---> libjrun_nsapi.so ??
I'm assuming CF is creating it, so try to follow my logic here.....
CF9 doesn't want to produce libjrun_nsapi.so in 64-bit mode.
The file is located here:
/opt/coldfusion9/runtime/lib/wsconfig/1/libjrun_nsapi.so
Instead it spits out a 32-bit file....
# file libjrun_nsapi.so
libjrun_nsapi.so:       ELF 32-bit MSB dynamic lib SPARC32PLUS Version 1, V8+ Required, dynamically linked, not stripped, no debugging information avail
It's supposed to look something like this:
# file libjrun_nsapi.so
libjrun_nsapi.so:       ELF 64-bit MSB dynamic lib SPARCV9 Version 1, dynamically linked, not stripped
I found out that when I use CF8, the installer asks for 64-bit configuration during install,
AND the initial startup makes the 64-bit connector.
In CF9...no such menu item; it doesn't mention 32/64 bit anything.
How do you force CF9 to produce a 64-bit libjrun_nsapi.so file?
This creates the 32-bit file...
cf_root/runtime/bin/wsconfig -server coldfusion -ws sunone -dir /sun/webserver7/<config-name>/config -coldfusion -v
When I add -ws64 it breaks the script....
cf_root/runtime/bin/wsconfig -server coldfusion -ws64 sunone -dir /sun/webserver7/<config-name>/config -coldfusion -v
How do you force CF9 to produce a 64-bit libjrun_nsapi.so file?
FYI: I grabbed the libjrun_nsapi.so file from my CF8 ENT install, and used it in my CF9 ENT install.
No errors from the web server, but it's running dirt-slow now.
Could be the file because the libjrun_nsapi.so was created to connect with CF8, not CF9 !?
How do you force CF9 to produce a 64-bit libjrun_nsapi.so file?

WIndows 7 64-bit system printing to a Windows 2000 server configured as a print server

Is there any way to configure a new Windows 7 64-bit computer to use a Windows 2000 server configured as a print server ?
The printer that I would like to connect to is an HP 4240n LaserJet. I appears that there is only a 64-bit Universal Print Driver available. The server currently uses HP 32-bit PCL5e or PCL6 drivers for all other connected computers. Connection is through a Hewlett-Packard Network Port, using DLC/LLC transport for the embedded 4240n print server.
Installing the HP 64-bit UPD to the WIndows 7 64-bit system, and then attempting to redirect the local port to the Win2k network print server has not worked.
Thanks for any advice.

Hi:
See if this works...
Run msconfig.
In the System Configuration screen, Boot tab, Advanced Options, if there is a check mark in the box next to Maximum memory. Remove that checkmark and save your changes.
Reboot and hopefully Windows recognises all the Ram ( minus the reserved ) after restarting.
Please give that a try, and post back and let us know if that frees up some system memory for you.
Paul

Printer Server configuration for APEX 3.1.2 in 10g XE

I have APEX3.1.2 installed in 10g XE and I am going thorough the OTN tutorial "[Oracle Application Express 3.0-- Building a Functional Application"|http://www.oracle.com/technology/obe/apex/obe30/apexdev30.htm#l7] in the section "Editing Application Objects".
When I click "Print Attribute" of a page region, it displayed "{color:#ff0000}Report printing is currently not available, there is no print server configured{color}".
Can you tell me what this means and how to resolve it. All I have is APEX3.1.2 installed in 10gXE.
I have searched this forum and it seems that I have to install/configure a printer server?
Thanks!
Kevin

Dan,
I have the same problem as Kevin.
Your answer to his question can be very helpful. But if I follow the link you provide, I cant find the step 5.2.
Step 5.1 is clear. But what are the tasks of step 5.2?
I hope that you can tell me this.
Thank you.
Carlos

Service Manager Data Warehouse Install - Analysis Server Configuration For OLAP Cubes Fail

Hello everyone,
I have an issue with my installation of the Data Warehouse for System Center Service Manager 2012 SP1.
My install environment is the following:
Windows Server 2012 – System Center Service Manager (Successfully Installed) - Virtual
Windows Server 2012 – System Center Data Warehouse (Pending) - Virtual
Windows Server 2012 – MS SQL Server 2012 – Physical, Clustered 1<sup>st</sup> of Four Servers
The SQL Server is a clustered installation with named instances, specifically for SharePoint and Service Manager. Each instance has its own IP address and dynamic ports are turned off. I’m installing using the domain administrator account and I also chose
to run the installer as administrator. The domain admin has sysadmin rights to the service manager server and instance I’m trying to install on. However, the account does not have sysadmin rights to some of the other instances.
The install is smooth up until it needs to connect to the Analysis server database. I have tried connecting to the analysis servers on other SQL servers on site and all were successful. The only difference between the older SQL servers, the SQL 2012 development
server and the SQL 2012 Production server I’m trying to install to is that the that the domain admin account doesn’t have sysadmin access on all the databases on the new production server. The SQL server is being installed and configured by a contractor so
if you all have troubleshooting suggestions, I’ll need to coordinate with the contractor.
Starting with the screen below, I began searching for help online. There seems to be no one else with this issue or it is not documented properly. I opened a ticket with MS, called the contractor and troubleshot with him, troubleshot as far as I could on
my own and I’m still at a loss as to what is preventing the installer from connecting specifically to the analysis server.
I first thought the installer was at issue or that the data warehouse sever was at issue. But all signs are pointing at the SQL server. The installer is able to connect to all the other SQL servers – including other 2012 servers (same versions) – so it can’t
be the installer. I’m pretty sure the SQL server is going to be at issue.
After looking at this error, I opened the resource monitor and clicked the dropdown to see if it was trying to connect to the correct server and it was. I then connected to the old and new test and development servers successfully. Then connected to the
SQL 2008 R2 production cluster successfully. I then compared the two servers. The only difference other than the version numbers is that the admin account doesn’t have sysadmin rights on all the SQL 2012 database servers. But the database servers are not the
problem. The analysis servers are.
I then checked the event logs and they are empty as far as this issue is concerned. Actually, there are no errors on the SQL 2012 production box and the Data Warehouse box. I then checked the log that the installer creates during every step of the installation
and this is what is created when the dropdown is clicked for the analysis server configuration screen. The log file location is:
“C:\Users\admin\AppData\Local\Temp\2\SCSMSetupWizard01.txt”
In the file is the following text.
01:03:34:Attempting connection to SQL Server 2012 management scope on SCSMSQL2012
01:03:34:Using SQL Server 2012 management scope on SCSMSQL2012
01:03:36:Collecting SQL instances on server SCSMSQL2012
01:03:36:Attempting connection to SQL Server 2012 management scope on SCSMSQL2012.johnsonbrothers.com
01:03:36:Using SQL Server 2012 management scope on SCSMSQL2012.johnsonbrothers.com
01:03:38:Found SQL Instance: SCSMSQL2012\PWGSQL2012
01:03:38:Found SQL Instance: SCSMSQL2012\SCSMSQL2012
01:03:39:Error:GetSqlInstanceList(), Exception Type: Microsoft.AnalysisServices.ConnectionException, Exception Message: A connection cannot be made. Ensure that the server is running.
01:03:39:StackTrace:   at Microsoft.AnalysisServices.XmlaClient.GetTcpClient(ConnectionInfo connectionInfo)
   at Microsoft.AnalysisServices.XmlaClient.OpenTcpConnection(ConnectionInfo connectionInfo)
   at Microsoft.AnalysisServices.XmlaClient.OpenConnection(ConnectionInfo connectionInfo, Boolean& isSessionTokenNeeded)
   at Microsoft.AnalysisServices.XmlaClient.Connect(ConnectionInfo connectionInfo, Boolean beginSession)
   at Microsoft.AnalysisServices.Server.Connect(String connectionString, String sessionId, ObjectExpansion expansionType)
   at Microsoft.SystemCenter.Essentials.SetupFramework.HelperClasses.SetupValidationHelpers.GetASVersion(StringBuilder sqlInstanceServiceName)
   at Microsoft.SystemCenter.Essentials.SetupFramework.HelperClasses.SetupValidationHelpers.GetSqlInstanceList(String sqlServerName, Int32 serviceType)
I’m now investigating the issue according to this output, and decided to ask you all if you’ve run into this issue and found a resolution.

I am running into same issue . But I don't anything in the instances section related to portipv6 . I do see in the listener section , I tried to remove it . But it comes up again . Please help
<ConfigurationSettings>
<Security>
<RequireClientAuthentication>0</RequireClientAuthentication>
<SecurityPackageList/>
</Security>
<Network>
<Listener>
<RequestSizeThreshold>4095</RequestSizeThreshold>
<MaxAllowedRequestSize>0</MaxAllowedRequestSize>
<ServerSendTimeout>60000</ServerSendTimeout>
<ServerReceiveTimeout>60000</ServerReceiveTimeout>
<IPV4Support>2</IPV4Support>
<IPV6Support>2</IPV6Support>
</Listener>
<TCP>
<MaxPendingSendCount>12</MaxPendingSendCount>
<MaxPendingReceiveCount>4</MaxPendingReceiveCount>
<MinPendingReceiveCount>2</MinPendingReceiveCount>
<MaxCompletedReceiveCount>9</MaxCompletedReceiveCount>
<ScatterReceiveMultiplier>5</ScatterReceiveMultiplier>
<MaxPendingAcceptExCount>10</MaxPendingAcceptExCount>
<MinPendingAcceptExCount>2</MinPendingAcceptExCount>
<InitialConnectTimeout>10</InitialConnectTimeout>
<SocketOptions>
<SendBufferSize>0</SendBufferSize>
<ReceiveBufferSize>0</ReceiveBufferSize>
<DisableNonblockingMode>1</DisableNonblockingMode>
<EnableNagleAlgorithm>0</EnableNagleAlgorithm>
<EnableLingerOnClose>0</EnableLingerOnClose>
<LingerTimeout>0</LingerTimeout>
</SocketOptions>
</TCP>
<Requests>
<EnableBinaryXML>0</EnableBinaryXML>
<EnableCompression>0</EnableCompression>
</Requests>
<Responses>
<EnableBinaryXML>1</EnableBinaryXML>
<EnableCompression>1</EnableCompression>
<CompressionLevel>9</CompressionLevel>
</Responses>
<ListenOnlyOnLocalConnections>0</ListenOnlyOnLocalConnections>
</Network>
<Log>
<File>msmdredir.log</File>
<FileBufferSize>0</FileBufferSize>
<MessageLogs>Console;System</MessageLogs>
<Exception>
<CreateAndSendCrashReports>0</CreateAndSendCrashReports>
<CrashReportsFolder/>
<SQLDumperFlagsOn>0x0</SQLDumperFlagsOn>
<SQLDumperFlagsOff>0x0</SQLDumperFlagsOff>
<MiniDumpFlagsOn>0x0</MiniDumpFlagsOn>
<MiniDumpFlagsOff>0x0</MiniDumpFlagsOff>
<MinidumpErrorList>0xC1000000, 0xC1000001, 0xC100000C, 0xC1000016, 0xC1360054, 0xC1360055</MinidumpErrorList>
<ExceptionHandlingMode>0</ExceptionHandlingMode>
<MaxExceptions>500</MaxExceptions>
<MaxDuplicateDumps>1</MaxDuplicateDumps>
</Exception>
</Log>
<Memory>
<HandleIA64AlignmentFaults>0</HandleIA64AlignmentFaults>
<PreAllocate>0</PreAllocate>
<VertiPaqPagingPolicy>0</VertiPaqPagingPolicy>
<PagePoolRestrictNumaNode>0</PagePoolRestrictNumaNode>
</Memory>
<Instances/>
<VertiPaq>
<DefaultSegmentRowCount>0</DefaultSegmentRowCount>
<ProcessingTimeboxSecPerMRow>-1</ProcessingTimeboxSecPerMRow>
<SEQueryRegistry>
<Size>0</Size>
<MinKCycles>0</MinKCycles>
<MinCyclesPerRow>0</MinCyclesPerRow>
<MaxArbShpSize>0</MaxArbShpSize>
</SEQueryRegistry>
</VertiPaq>
</ConfigurationSettings>

OIM 11g Server Configuration Wizard Error - Cannot Connect to Oracle DB

I appreciate any and all suggestions or thoughts on how to best continue troubleshooting this error that I am describing below.
I am attempting to install Oracle Identity and Access Management Suite 11g on a Windows 7 machine…in following the installation guides I have successfully installed the following Oracle Components
- Oracle Database 11.2.0.1.0
- Created Schemas using RCU 11.1.1.3.3
- Oracle WebLogic Server 10.3.3.0
- Oracle SOA 11.1.1.2.0
- Oracle SOA 11.1.1.3.0 (Patch Set)
- Oracle IAM SUITE 11.1.1.3.0
Following the above installations, I created a new WebLogic Domain and as the next step am running the OIM Configuration Wizard to configure the OIM Server, however I am unable to setup a connection to the Oracle DB via the OIM Configuration Wizard. I am getting an error message when attempting to setup the connection to the Oracle Database using the OIM 11g Server Configuration Wizard:
ERROR:*
INST:6102 Unable to connect to the database with the given credentials.
*+[DETAILS] Check the values. Make sure the Database is up and running and connect string, user name, and password are correct.+*
INST:6102 Unable to connect to the database with the given credentials.
*+[DETAILS] Check the values. Make sure the Database is up and running and connect string, user name, and password are correct.+*
When installing the Oracle Database 11gR2 I used the following install configuration:
Oracle base: C:\MyApps\Oracle
Software location: C:\MyApps\Oracle\DB_HOME\11.2.0\dbhome_1
Database file location: C:\MyApps\Oracle\DB_HOME\oradata
Database Edition: Personal Edition (3.27 GB)
Character Set: Unicode (AL32UTF8)
Global database name: orcl.dev.com
Administrative Password: Password1
Confirm Password: Password1
When creating my Schemas using RCU 11.1.1.3.3 I used the following Database Connection Details
DB TYPE: Oracle Database
HOST NAME: localhost
PORT: 1521
SERVICE NAME: orcl.dev.com
USERNAME: sys
PASSWORD: Password1
ROLE: SYSDBA
I used a Prefix of “DEV” when creating the schemas so Schema Owners DEV_OIM and DEV_MDS where created. Also, I configured to use the same password for all Schemas: “Password1″. So the password for DEV_OIM and DEV_MDS should be the same, “Password1″.
REPRODUCING THE ERROR
To reproduce the error, when I launch the Oracle Identity Management 11g Configuration Wizard I am first brought to the “Welcome” Screen. I click the [Next>] button.
Next, I am on the “Components to Configure” screen where I select OIM Server and OIM Design Console and click the [Next>] button. (NOTE I have also tested by simply selecting only the OIM Server)
Next, I am on the “Database” screen where I enter the connection information
Connection String: localhost:1521:orcl.dev.com
(NOTE I have also tested using localhost:1521:orcl)
OIM Schema User Name: DEV_OIM
OIM Schema Password: Password1
MDS Schema User Name: DEV_MDS
MDS Schema Password: Password1
When I click the [Next>] button after entering the Database Connection details I encounter the following two errors (1 error for each logon DEV_OIM and DEV_MDS)
INST:6102 Unable to connect to the database with the given credentials.
INST:6102 Unable to connect to the database with the given credentials.
TROUBLESHOOTING
NOTE: I can successfully start the Oracle DB Services and connect via the Enterprise Console, SQL Plus, and JDBCTest Java Client…I just cannot get past this connection error in the OIM Server Configuration Wizard.
JDBCTest.java TEST CLIENT
NOTE: THIS IS THE JAVA TEST CLIENT THAT I AM USING TO TEST DATABASE CONNECTIVITY THRU A SPECIFIED JDBC URL AND DRIVER THAT WORKS SUCCESSFULLY.*
import java.sql.Connection;
import java.sql.DatabaseMetaData;
import java.sql.DriverManager;
import java.sql.ResultSet;
public class JDBCTest {
public static void main(String[] args) throws Exception {
String url = "jdbc:oracle:thin:@localhost:1521:orcl";
String driver = "oracle.jdbc.OracleDriver";
String user = "DEV_OIM";
String password = "Password1";
try {
Class.forName(driver);
Connection conn = DriverManager.getConnection(url, user, password);
// Get the MetaData
DatabaseMetaData metaData = conn.getMetaData();
// Get driver information
System.out.println("");
System.out.println("#########################################");
System.out.println("# ***DRIVER INFORMATION***");
System.out.println("#");
System.out.println("# Driver Name = " + metaData.getDriverName());
System.out.println("# Driver Version = " + metaData.getDriverVersion());
System.out.println("#");
System.out.println("#########################################");
System.out.println("");
System.out.println("");
// Get database information
System.out.println("#########################################");
System.out.println("# ***DATABASE INFORMATION***");
System.out.println("#");
System.out.println("# Database Product Name = " + metaData.getDatabaseProductName());
System.out.println("# Database Product Version = " + metaData.getDatabaseProductVersion());
System.out.println("#");
System.out.println("#########################################");
System.out.println("");
System.out.println("");
// Get schema information
ResultSet schemas = metaData.getSchemas();
System.out.println("#########################################");
System.out.println("# ***SCHEMA INFORMATION***");
System.out.println("#");
System.out.println("# Schemas:");
while (schemas.next()) {
System.out.println("# " + schemas.getString(1));
System.out.println("#########################################");
System.out.println("");
System.out.println("");
// Get table information
System.out.println("Tables");
ResultSet tables = metaData.getTables("", "", "", null);
while (tables.next()) {
System.out.println(tables.getString(3));
conn.close();
} catch (Exception ex) {
ex.printStackTrace();
*"lsnrctl status" COMMAND TEST SUCCESSFUL*
When the Listener Service is on I get the following output using lsnrctl status command
C:\> lsnrctl status
LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 21-SEP-2010 15:59:43
Copyright (c) 1991, 2010 Oracle. All rights reserved.
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows:Version 11.2.0.1.0 - Production
Start Date 21-SEP-2010 14:43:57
Uptime 0 days 1 hr. 15 min. 46 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\MyApps\Oracle\DB_HOME\11.2.0\dbhome_1\NETWORK\ADMIN\listener.ora
Listener Log File c:\myapps\oracle\diag\tnslsnr\\listener\alert\log.xml
Listening Endpoints Summary…
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
Services Summary…
Service “CLRExtProc” has 1 instance(s).
Instance “CLRExtProc”, status UNKNOWN, has 1 handler(s) for this service…
Service “orcl.dev.com” has 1 instance(s).
Instance “orcl”, status READY, has 1 handler(s) for this service….
Service “orclXDB.dev.com” has 1 instance(s).
Instance “orcl” status READY, has 1 handler(s) for this service…
The command completed successfully

Whenever installing oracle databases, i install the software only first. Then i setup the listener. Then i create a database instance using the dbca tool. This way all the information is added to the pre-existing listener configurations rather than trying to create the listener afterwards. Also, during the dbca database creation, i supply a full service name such as orcl.hostname and use the service name in future configurations where it asked. This usually solves any issues of the listener or database not being found correctly.
-Kevin

URL file-access is disabled in the server configuration

My hosting company has made a server config change and my xslt pages have stopped working with the following error.
It says url file access is disabled but my phpinfo() still shows allow_url_fopen = on
What else might be the problem?
Warning: require_once() [
function.require-once]: URL file-access is disabled in the server configuration in
/homepages/0/xxx/htdocs/xxxx/inc/horoscope_xml.php on line
3
Warning: require_once(
http://www.xxxx.co.uk/includes/MM_XSLTransform/MM_XSLTransform.class.php) [
function.require-once]: failed to open stream: no suitable wrapper could be found in
/homepages/0/xxxx/htdocs/xxxxx/inc/horoscope_xml.php on line
3
Fatal error: require_once() [
function.require]: Failed opening required 'http://www.xxxxx.co.uk/includes/MM_XSLTransform/MM_XSLTransform.class.php' (include_path='.:/usr/lib/php5') in
/homepages/0/xxxx/htdocs/xxxxx/inc/horoscope_xml.php on line
3

bikeman01 wrote:
I don't understand your use of the word 'class' in your reply - I am using php not asp.net.
The name of the file that you are trying to access is MM_XSLTransform.class.php. It is a PHP class created by Dreamweaver for the XSL Transformation server behavior.
The servers php is 5.2.11, as it has been for sometime, so I know that it previously worked with allow_url_fopen = on and allow_url_include = off
Judging from the error message, you are trying to include the file using a URL, rather than a file path:
Fatal error: require_once() [
function.require]: Failed opening required 'http://www.xxxxx.co.uk/includes/MM_XSLTransform/MM_XSLTransform.class.php' (include_path='.:/usr/lib/php5') in
/homepages/0/xxxx/htdocs/xxxxx/inc/horoscope_xml.php on line
3
Change the URL to a file path:
require_once('/homepages/0/xxxx/htdocs/includes/MM_XSLTransform/MM_XSLTransform.class.php');
Is it possible for phpinfo() to show allow_url_fopen = on yet be actually off on the server?
No.
[Edited to correct name of server behavior]

NWDI for the 04s preview fails with 'SLD name-server configuration error'

After the installation, everything seems to work fine except that when I go to CMS, the links on the top seems to be hardcoded to point to http://pwdf3102:50100/dtr, even in the Domain Data. When I tried to change it to my local server, it keeps complaining about "Unexpected error; inform your system administrator: <Localization failed: ResourceBundle='com.sap.cms.util.exception.CMSExceptionMessages', ID='SLD name-server configuration error', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key SLD name-server configuration error"
Any suggestions on how to work around this? Thanks.

Brian,
Try to import the model file first by going to SLD->Administration->Import CIM Model. If the problem sticks, then try to remove the systems. The preview version has lots of pre-exist system name in the technical system, which you can find giving errors since they're not reachable. So you can remove them from SLD (Home->Technical Systems) if they are preventing you from procceeding.
You need to go to http://server:port/dtr/system-tools/administration/NameServerConfiguration to update the name server as well.
Hope this helps...
Message was edited by: Yujian Yan

Regd.UDDI server configuration in PI 7.1 and services registry

Hi ,
i have gone through many forum posts before posting this , so expecting a genuine answer:) which can be rewarded:).
I am using PI 7.1 and trying to taste the services registry flavour of it.
i followed the SAP Note 1267817 - Configure Services Registry proxy , but i am not able to assign the roles
SERVICES_REGISTRY_READ_ONLY or SERVICES_REGISTRY_READ_WRITE in Su01.
i get a message that such a role doesnt exist at all.
Qn1:Do i need installed any software componet like UDDI etc, or do in need to have uddi server
configured for this , if yes how to do that..
I have seen the help.sap link : I am struck at the point "Discovery URL host name", according to the help.sap it will come automatically , but in my case it has some Rivalry.
Qn2:How to configure UDDI server n PI 7.1
, any step by step guide which applies to PI 7.1 will help.
Qn3:What is the relation between tcode soamanager, services registry and UDDI
Qn4: I am not able to search my services in soamanager->business administration->WS administration
I have activated the services (Webservice Runtime)as mentioned in the Blog
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/d06b6392-cde7-2c10-8f8b-bdea5d781dd9

Thanks Raj,
This property specifies a URL for the host name of the *physical machine where the Discovery
API of the UDDI server is located.* Its value is set automatically by default.
I am not able to understand this present in [help.sap |http://help.sap.com/saphelp_nwpi71/helpdata/en/45/c1ea61a1194432e10000000a155369/frameset.htm]
what may be the reason for not able to assign the above roles as per the sap note given above?
Is there any componet needs to be installed line UDDI?Can a technical user role have this roles
accepted,i used my ID for configuration XI super user!
After following the note partially i.e w/o giving the user roles. when in rt click sender agreement and say publish
it slaps me with this error
Com.sap.aii.ib.core.uddi.RegistryCleintException:
A save request exceeded the quantity limits u2026Number of Business Entries Exceeds Your limit of 1(2)
But if i open Services registry i can see that service got published.when i test in WS navigatore it
gives 503 service unavailable error.
How to delete unused published services
. Initialy i took the wsdl URL generated from
disply WSDL and published using publish tab in Services Registry , they dont have any key associated.
How to delete them?I can see any direct option
Regards,
Abhi

Export Server Configuration

Similar Messages

Maybe you are looking for