Exporting Portal to a different machine
We are having to move our Portal from an installation on one machine to another - I gather this is covered by an 'Export/Import' processes by Oracle - although I can find some documentation about doing this for just a database, I can't find any documentation for exporting a portal.
Can you point me in the right direction?
Katie
Katie,
We are working on a document using which one should be able to move portal from one database to another. We will be posting it on otn once it is ready.
Thanks and Regards
Balaji
Similar Messages
-
Using Workshop with portal on a different machine
Hi,
I am using the workshop on my local machine and I have one portal which is
installed on a machine which is in the same network (linux). Can anyone
please help me, how I can use the workshop with the portal on a different
server? I only managed to get it working on my local machine.
MichaelMichael,
The easist (but probably not the best) option is to create an ear file, and deploy
it to the linux server.
I believe it would also be possible to create an nfs-style mount between your
linux server and your workshop PC, then change the references in workshop to the
new directory structure and server IP address/port number.
I think this should work.
Ie; Create your nfs mount from your linux svr to say on g:\ (workshop pc)
Then create your application in workshop, save it to the g:\ drive,
Change your app settings to access the server on the linux svrs' IP /port, user/password
Hit Deploy app, or preview a page.
With a little bit of fiddling/luck you should be able to get this running.
Steve
"Michael Meyer" <[email protected]> wrote:
Hi,
I am using the workshop on my local machine and I have one portal which
is
installed on a machine which is in the same network (linux). Can anyone
please help me, how I can use the workshop with the portal on a different
server? I only managed to get it working on my local machine.
Michael -
Font (typography) loses alignment while exporting the FLA in different machine.
Hello everybody,
I'm having a problem when I export the *. FLA was created in a machine different from mine.
Every time I get a *. fla of a client in my machine and I export the fonts (typography) loses its alignment and distorts the original creation.
Remembering that I have the *. FLA and fonts (typography) the original client.
Could anyone help me with this issue?
Thank you all.
Valter RuedaThank you for review.
Indeed in some cases the FLAs are created on Mac and PC are then exported, I believe that is the question. Is not there anything I can do?
I have a MAC here and this problem appears whenever I try to export. The question of alignment is solved but ends up interfering with the special characters of typography. When there is one is another.
Conclusion that in the end I have to ask the creator to export it again creating a new work unnecessary.
The technical answer to this problem then would be the high data exchange between Mac and PC FLAs? -
I need help using the impdb utility on a different machine to the export...
Hi all,
I have recieved an export from a ClearQuest database, built on Oracle.
It's a 6GB file xxx_full_dpdump.dmp, with a corresponding .log.
This was exported from a different Oracle instance on a different machine.
I'd like to import this dump file into my Oracle instance.
I tried to use imp, and received the following error: IMP-00010: not a valid export file, header
After a bit of reading, I think this may becase I should be using impdp.
BUT... when trying to use impdp, I'm not sure how to structure the syntax? specifically, what is DIRECTORY?
As this is export is from a different machine, the directory that it was exported to is not on my machine.
When running ...
impdp username/password directory=MyDirectoryThatContainsTheDmp DUMPFILE=xxx_full_dpdump.dmp
... I receive:
ORA-39002: invalid operation
ORA-3970: Unable to open the log file
ORA-3907: directory name MyDirectoryThatContainsTheDpm is invalidThanks, I'm using Windows XP SP3 and Oracle 11g (11.2.0.1.0)
So I've now granted the right permissions, it seems and The Impdp now executes (Hoorar!)
The command I'm running is:
impdp username/password directory=DATA_PUMP_DIR dumpfile=xxx_full_dpdump.dmp REMAP_SCHEMA=MYUSER:Test;
... where MYSUER is who I'm logged in as running this command; and Test is just a word, I haven't created anything called this myself.
BUT ... I get a few thousand errors around
- Cannot add file ... file has an Oracle Managed Files file name
- CREATE USer ..... failed tablespace XXX does not exist
- lots of "already exists" errors for users and tables.
Any ideas what I'm doing wrong? I though these would all be created as new items under MYUSER.
Thanks so much! -
Problem to migrate a non-global zone to a different machine.
Hi, recently, I had try to migrate a non-global zone to a different machine but its doesnt work.
1. First, this is the structure of my machine with my non-global zone:
host1# uname -a
SunOS testsolaris 5.11 snv_101b i86pc i386 i86pc
host1# zfs list
NAME USED AVAIL REFER MOUNTPOINT
big-zone 1.71G 1.64G 20K /big-zone
big-zone/export 1.71G 1.64G 22K /big-zone/export
big-zone/export/big-zone 1.67G 1.64G 21K /big-zone/export/big-zon e
big-zone/export/big-zone/ROOT 1.67G 1.64G 18K legacy
big-zone/export/big-zone/ROOT/zbe 1.67G 1.64G 1.66G legacy
big-zone/export/zonetest 41.8M 1.64G 21K /big-zone/export/zonetes t
big-zone/export/zonetest/ROOT 41.8M 1.64G 18K legacy
big-zone/export/zonetest/ROOT/zbe 41.8M 1.64G 1.66G /big-zone/export/zonetes t/root
rpool 8.35G 7.28G 72K /rpool
rpool/ROOT 6.86G 7.28G 18K legacy
rpool/ROOT/opensolaris 6.86G 7.28G 6.73G /
rpool/dump 575M 7.28G 575M -
rpool/export 375M 7.28G 21K /export
rpool/export/home 18K 7.28G 18K /export/home
rpool/export/small-zone 375M 7.28G 21K /export/small-zone
rpool/export/small-zone/ROOT 375M 7.28G 18K legacy
rpool/export/small-zone/ROOT/zbe 375M 7.28G 375M legacy
rpool/swap 575M 7.78G 56.8M -
2. In second, I had detach my non-global zone zonetest whit this commands :
host1# zoneadm z zonetest halt
host1# zoneadm z zonetest detach
3. In third, I had move my zonepath to my new host.
host1# cd /big-zone/export
host1# tar cf zonetest.tar zonetest
host1# sftp jay@new-host
host1# put zonetest.tar
Uploading .
host1# quit
4. Unpack my .tar file
host2# cd /big-zone/export
host2# tar xf zonetest.tar
So, after this, I think that my zonepath is transfert to my new host.
This is the structure of my new host :
jay@alien:~$ uname -a
SunOS alien 5.11 snv_101b i86pc i386 i86pc Solaris
jay@alien:~$ zfs list
NAME USED AVAIL REFER MOUNTPOINT
rpool 18.3G 73.3G 72K /rpool
rpool/ROOT 2.98G 73.3G 18K legacy
rpool/ROOT/opensolaris 2.98G 73.3G 2.85G /
rpool/dump 1023M 73.3G 1023M -
rpool/export 13.3G 73.3G 19K /export
rpool/export/home 13.3G 73.3G 19K /export/home
rpool/export/home/jay 13.3G 73.3G 13.3G /export/home/jay
rpool/swap 1023M 73.9G 321M -
zdata 10.7G 80.8G 9.65G /zdata
zdata/zones 1.08G 80.8G 18K /zdata/zones
zdata/zones/zonetest 1.08G 80.8G 1.08G /big-zone/export/
*I have a mountpoint to /big-zone/export
5. I had try to configure my zone on my new host and I receive and error message:
host2# zonecfg -z zonetest
zonetest: No such zone configured
Use 'create' to begin configuring a new zone.
zonecfg:zonetest> create -a /big-zone/export/zonetest
invalid path to detached zone
zonecfg:zonetest>And my new big-zone (on the second host) show this in the /big-zone/export/zonetest folder :
jay@alien:/zdata/zones# zfs list
NAME USED AVAIL REFER MOUNTPOINT
rpool 23.5G 68.0G 72K /rpool
rpool/ROOT 6.31G 68.0G 18K legacy
rpool/ROOT/opensolaris 6.31G 68.0G 6.18G /
rpool/dump 1023M 68.0G 1023M -
rpool/export 15.2G 68.0G 19K /export
rpool/export/home 15.2G 68.0G 19K /export/home
rpool/export/home/jay 15.2G 68.0G 15.2G /export/home/jay
rpool/swap 1023M 68.6G 361M -
zdata 11.6G 79.9G 10.7G /zdata
zdata/zones 921M 79.9G 18K /zdata/zones
zdata/zones/web 921M 79.9G 21K /zdata/zones/web
zdata/zones/web/ROOT 921M 79.9G 18K legacy
zdata/zones/web/ROOT/zbe 921M 79.9G 921M legacy
zdata/zones/zonetest 54K 79.9G 18K /big-zone/export/zonetest
zdata/zones/zonetest/ROOT 36K 79.9G 18K legacy
zdata/zones/zonetest/ROOT/zbe 18K 79.9G 18K legacy
jay@alien:/zdata/zones/zonetest# pwd
/zdata/zones/zonetest
jay@alien:/zdata/zones/zonetest# ls -ls
total 6
3 drwxr-xr-x 2 root sys 2 Feb 8 2009 dev
3 drwxr-xr-x 16 root root 19 Feb 8 2009 root
jay@alien:/zdata/zones/zonetest# cd root
jay@alien:/zdata/zones/zonetest/root# ls -ls
total 52902
1 lrwxrwxrwx 1 root root 9 Feb 1 20:29 bin -> ./usr/bin
3 drwxr-xr-x 13 root sys 15 Feb 8 2009 dev
11 drwxr-xr-x 55 root sys 168 Feb 8 2009 etc
3 dr-xr-xr-x 2 root root 2 Jan 22 16:26 home
15 drwxr-xr-x 9 root bin 241 Feb 4 2009 lib
3 drwxr-xr-x 2 root sys 2 Jan 22 16:23 mnt
3 dr-xr-xr-x 2 root root 2 Jan 22 16:26 net
3 drwxr-xr-x 4 root sys 4 Jan 24 15:26 opt
3 dr-xr-xr-x 2 root root 2 Jan 22 16:23 proc
3 drwx------ 3 root root 7 Feb 6 2009 root
5 drwxr-xr-x 2 root sys 47 Jan 22 16:24 sbin
3 drwxr-xr-x 4 root root 4 Jan 22 16:23 system
3 drwxrwxrwt 2 root sys 2 Feb 8 2009 tmp
5 drwxr-xr-x 30 root sys 42 Feb 6 2009 usr
3 drwxr-xr-x 32 root sys 32 Feb 6 2009 var
52835 -rw-r--r-- 1 root root 42882560 Jan 22 16:35 webmin-1.441.pkg
jay@alien:/zdata/zones/zonetest/root#
I think my problem is there ...
jay@alien:/big-zone/export/zonetest# pwd
/big-zone/export/zonetest
jay@alien:/big-zone/export/zonetest# ls -ls
total 8
2 ---------- 1 root root 114 Dec 31 1969 @LongLink
3 drwxr-xr-x 2 root root 2 Feb 1 21:10 root
3 drwx------ 4 root root 4 Feb 1 21:10 zonetest
jay@alien:/big-zone/export/zonetest# cd zonetest/
jay@alien:/big-zone/export/zonetest/zonetest# ls -ls
total 6
3 drwxr-xr-x 2 root sys 2 Feb 8 2009 dev
3 drwxr-xr-x 4 root root 5 Feb 1 21:10 root
jay@alien:/big-zone/export/zonetest/zonetest# cd root
jay@alien:/big-zone/export/zonetest/zonetest/root# ls -ls
total 7
1 lrwxrwxrwx 1 root root 9 Feb 1 21:10 bin -> ./usr/bin
3 drwxr-xr-x 4 root root 4 Jan 22 16:23 system
3 drwxr-xr-x 23 root sys 28 Feb 1 21:11 usr
I think I have a problem with my zfs mountpoint but I don't how to resolve this.
Edited by: jaymachine on Feb 26, 2009 6:16 PM -
Generally when creating a Word file from either a Mac or Win7 pc and opening it on two different machines (either one first) it always prompts that the file is open and will be opened as read only.
However opening a CSS file does not prompt that it is already open on or from any machine which is causing code edits to be lost.
What we found from out testing:
- The file can be saved from one user to the server and WILL NOT PROMPT on other machines until the saving machine has the Dreamweaver program closed completely
- The file can be closed and Dreamweaver minimised to the launch bar but it still will not register on other machines that it has been changed.
- Also, until the Dreamweaver program is closed on the machines, it will continue to open it's saved version of the file.
Example Scenario:
- User 1 opens test.css (which is 2000 lines) and adds some code to the end of the file to bring it up to 2500 lines
- Meanwhile User 2 opens test.css as well (opens as 2000 lines as User 1’s edits have not yet been saved) and adds in code to bring it to 2300 lines
- User 1 saves his file and closes it - but Dreamweaver is still open.
- User 2 also saves his file and leaves Dreamweaver open.
- The server will report the size and last edit of the file the same as User 2 as he was the last person to save it (and if you open from the Win7 Machine it will show as User 2’s 2300 line version)
- If User 1 then open's the file again (from either the 'recent' in Dreamweaver OR clicking on the file directly in Finder...which version opens.... The version that User 1 saved! Not the true version on the server, but the version that User 1 edited and saved with 2500 lines in it.
- Same for User 2, he will open 'his' version with 2300 lines in.
Other information:
- Files are opened directly from the server
- Sometimes the users will save incrementally and re-open
- Most of the time users will save incrementally and keep the files open
- The users will never not save incrementally and just save when closing the file once finished
- The users are usually working on the files all day
- It is always the bottom lines of code that are lost. It could be a case of the two versions being mixed up and cutting off the newly added lines based on the line count (possibly).
It is as if Dreamweaver is holding a cache of the version locally and then only properly looking back to the server when it has been completely closed. It is very difficult to see how the server is causing such an impact on these files, there are very few logs which are giving any indication to the root cause of the problems.
Anyone know if this is a known issue?
Is there a way that there can be a featured implemented on the server that doesn't allow another user to open a file if it is already open on another machine?
ThanksYour server file handling has nothing, and really nothing to do with Adobe software. If files don't get locked for (over-)writing and/or lose connection to the program opening them, then your server is misconfigured. It's as plain and simple and that. Anything from "known file types"/ file associations not being set correctly, MIME types being botched, crooked user privileges and file permissions, missing Mac server extensions, delayed file writing on the server, generic network timeout issues and what have you. Either way, you have written a longwinded post with no real value since you haven't bothered to provide any proper technical info, most notably about the alleged server. Either way, the only way you can "fix" it is by straightening out your server and network configuration, not some magic switch in Adobe's software.
Mylenium -
Problem with NIReport.llb\Print HTML Report using IE.vi on different machines
We have 5 machines here in our workgroup which have the same state regarding security patches and other system updates. We recently found out that there is a problem with the NIReport.llb\Print HTML Report using IE.vi on the different machines.
If I would open the VI on MachineA the control could be loaded. If I would open the VI on MachineB the control could be loaded. If I would copy the VI from MachineB to MachineA and open the VI the control could not be loaded. If I would copy the VI from MachineA to MachineB and open the VI on MachineB the control could be loaded. MachineB could load the version from MachineA and MachineB but on MachineA only the own version will load. I have seen that both versions have the same GUID for the Microsoft Webbrowser but are different in some other aereas.
Since printing HTML Reports is part of the application which will be distributed as application I want to know if someone else have seen such a behaviour or has got problems distributing an application.
Also I want to know which additional information is stored in an Active-X container about the control beside the GUID.
We have Win XP Prof SP2 with MS IE 6.0.2900.2180 on all machines in the workgroup.
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questionsHi Tom,
this is the VI <vi.lib>\Utillitiy\NIReport.llb\Print HTML Report using IE.vi copied from a machine that can load and run the VI and it will print. On this machine the control in the VI is white.
This VI will give the "Control could not be loaded" message on my machine.
The file shdocvw.dll is 2006-10-23 16:18 size 1.460 KB and I verifyed that both machines have the same version of this file.
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions
Attachments:
Print HTML Report using IE.png 11 KB -
Access application hosted on a different machine.
Hi,
I've written a simple web application to select an excel file through a jsp and write it's contents to text file. I select the execl file by browsing through the folders in my system. when i submit the form giving the location of the text file to which this excel file contents have to be written i'm getting the expected result. This application is hosted in Tomcat in my system. But when i tried accessing the application from another system my application is unable to find the excel file path selected in that machine. So i'm getting FileNotFoundException. Please suggest a solution.
Thanks,
SudhaHi,
I know that an application is hosted on a particular system. That application's job is to take the excel file selected by me and create a text file out of that. But as that application is hosted in a different machine it is unable to find the path i select. My doubt is like is it possible to have an application like this with actual source code and server on one system and user accessing from a different system and still able to find the path of the excel file the user is selecting?
Thanks,
Sudha -
Can I run 2 different domains with same name but on 2 different machines?
I am trying to setup 2 domains with same name (sharedcds1) on 2 different machines (Machine1 and Machine2).
When I start the weblogic managed server 1 (sharedcds1managedserver1) on Machine2, it throws an error saying it has some conflicts with the managed server 1 running on Machine1. How did the managed server of one machine know about the other server. Can I run 2 different domains with same name but on 2 different machines?
Here is the error in the log -
<Jun 14, 2005 10:53:29 AM EDT> <Error> <Cluster> <BEA-000123> <Conflict start: You tried to bind an
object under the name weblogic.transaction.coordinators.sharedcds1managedserver1 in the JNDI tree.
The object from 4596206652609838848S:130.170.61.153:[9505,9505,-1,-1,9505,-1,-1,0,0]:sharedcds1:s
haredcds1managedserver1 is non-clusterable, and you have tried to bind more than once from two or m
ore servers. Such objects can only be deployed from one server.>
<Jun 14, 2005 10:53:29 AM EDT> <Error> <Cluster> <BEA-000123> <Conflict start: You tried to bind an
object under the name weblogic.transaction.coordinators.sharedcds1managedserver1 in the JNDI tree.
The object from 8842351474821025197S:130.170.61.154:[9505,9505,-1,-1,9505,-1,-1,0,0]:sharedcds1:s
haredcds1managedserver1 is non-clusterable, and you have tried to bind more than once from two or m
ore servers. Such objects can only be deployed from one server.>
Thanks
SatishYes you can. Make sure that domains configured to use different multicast address. WLS uses multicast for communications between nodes in domain.
although your configuration will work, you could have troubles if you going to execute inter-domain calls between domains/servers with the same names. -
Data not populated when run from a different machine
I have a stored procedure which populates a table
The stored procedure when it is run on my machine using SQL Plus populates data correctly in a table.
I select using SQL PLUS and it shows that the data is there
But when I run the SAME procedure ( SAME schema, SAME parameters, same everything ) from a
different machine using SQL PLUS , it shows that "PL/SQL procedure completed successfully", BUT does not populate
the table.
SAme thing is happening for all other procedures too.
Why is this happening
Please help
AshwinI checked using this
SELECT * FROM V$PARAMETER WHERE LOWER(NAME) ='nls_language'
AND I get same results on both machines
NUM NAME TYPE
VALUE
ISDEFAULT ISSES ISSYS_MOD ISMODIFIED ISADJ DESCRIPTION
UPDATE_COMMENT
96 nls_language 2
AMERICAN
TRUE TRUE FALSE FALSE FALSE NLS language name
Thanks
Ashwin N. -
How can i look up a EJB residing in different machine from client side?
hai ,
How can i look up a EJB residing in different machine from client side?
this is my code...........i don't know what should i use as Initial Context Factory...................i am using a sun appserver 8............
package com.parx.lms.lmsdelegate;
import com.parx.lms.exception.LMSException;
import javax.naming.Context;
import javax .ejb.CreateException;
import javax.naming.InitialContext;
import javax.naming.NamingException;
import javax.rmi.PortableRemoteObject;
import java.rmi.RemoteException;
import com.parx.lms.controller.*;
import com.parx.lms.vo.UserVo;
import com.parx.lms.exception.BusinessException;
import java.util.Hashtable;
import java.lang.*;
public class LmsDelegate{
private final static String JNDI_NAME="LmsBean";
private static String url="http://localhost:4848";
public static Lms lms = null;
public void getController() throws CreateException,
NamingException,RemoteException{
if(lms == null){
Hashtable h=new Hashtable();
h.put(Context.INITIAL_CONTEXT_FACTORY," ********what should i use here???????*************************");
h.put(Context.PROVIDER_URL,url);
System.out.println("Before Loading Context in Delegate");
Context ctx=new InitialContext(h);
System.out.println("Loaded Context in Delegate");
Object obj=ctx.lookup(JNDI_NAME);
System.out.println("Loaded Object in Delegate");
System.out.println("Before Loading Home in Delegate");
LmsHome home = (LmsHome )PortableRemoteObject.narrow(obj,com.parx.lms.controller.LmsHome.class);
System.out.println("Loaded Home in Delegate");
lms = home.create();
System.out.println("Loaded remote in Delegate");
public void addUserDelegate(UserVo vo) throws BusinessException{
try{
getController();
System.out.println("Before calling the addUser of Session");
lms.addUser(vo);
}catch(CreateException e){
System.out.println("Create Exception in Delegate due to--->"+e);
e.printStackTrace();
throw new BusinessException(e);
}catch(NamingException e){
System.out.println("Naming Exception in Delegate due to--->"+e);
e.printStackTrace();
throw new BusinessException(e);
catch(RemoteException e){
System.out.println("Remote Exception in Delegate due to--->"+e);
e.printStackTrace();
throw new BusinessException(e);
}catch(LMSException e){
System.out.println("duplicate user name--->"+e);
e.printStackTrace();
throw new BusinessException(e);
pls help me..........h.put(Context.INITIAL_CONTEXT_FACTORY," ********what should i use here???????*************************")
Each app server provides their own jndi factory class. For ex for weblogic it is weblogic.jndi.WLInitialContextFactory. SInce you are using sun app server, check if there are any examples to find out or the docs.
private static String url="http://localhost:4848
Since the client is in a different machine the localhost is not going to work here. provide the url or the machine name of the system in which ur sunapp server is running. In addition u will need to have the stubs of the remote interfaces in ur client machine. -
How to copy data of a table to the same but on a DIFFERENT MACHINE?
Hello experts,
I want to copy all entries of table TE422 to the same, but on a <u>different machine</u>. I created a transport request (workbench request using TABU) intending to copy the entire table data from QA into DEV environment.
However, this is not working, because, in our installation, QA is on one server, and DEV on another! So, in a way, each machine seem to be transparent to the other and I cannot, or, do not know, how to specify the DEV environment as target.
I was told that I have to do something at the OS level. That is to say, have some kind of SQL query which collects data from one and uploads it onto the other.
Now my question is: Is there a SAP way to do this, that is to say, forget the SQL thingy and do it with some SAP transaction? If yes, how? If not, do you have a sample code which does this please?
Your help is greatly appreciated.
GoharjouMethod 1:
You can transport using ALE/IDOC, Write a simple outbound function moule in Source System and Develop a Inbound function module in target system.
Method 2:
Download the entire table contents into a flat file from source system by developing a simple report using WS_DOWNLOAD function module. Then Develop a report using WS_UPLOAD in target system and upload thd flat file.
Thanks & Regards,
Vijay -
My hard drive crashed and I am using a different machine. How do I retrieve my personalized Pages 5.2 templates from my backup drive? I have searched at length and can't seem to find them.
login_directory = /Users/yourname
If the Library folder is not shown in your login directory, then open a Finder window, and press command+J. This will open a Finder View Options panel. On it, there is a selectable entry to Show Library Folder. Once this is selected, the Library folder will appear. Now, follow the instructions in my May 6 post. You will have to right-click on com.apple.iWork.Pages and choose Show Package Contents, before continuing.
Correction: login_directory/Library/Containers/com.apple.iWork.Pages/Data/Library/Applicatio n Support/User Templates/
The host software persists in changing the correct Application Support text above to Applicatio n Support, which does not exist. -
Hi,
System Specification :
-XP with SP3
-MS Office 2003
-Flash V.10
-Xcelsius Engage 2008 ( 5.3.0.0 )
-Xcelsius Build number 12,3,0,670
When I export output in swf format then xcelsius generating swf file of version 9. I want to export swf file in different versions of flash like (6,7,8,9) . I tried to install older versions of flash to do this but I am not able to open xcelsius in older version. I am getting error saying 'Install latest flash player'.
Is there any way to export swf files in different versions?
Is this build is compatible with only flash 10?
Thanks,
GaneshXcelsius only support Flash version from 9 on. There is no way to export to 6,7 or 8.
-
JDBC connection to two different machines from the same program
I want to use JDBC to connect to two different databases that are on two different MySQL installations on two different machines.
One of the installations is MySQL 4.1.12 and the other is 4.1.14-nt
For some reason, all my statements seem to be going only to one machine, even though I am very clearly set it up to go to two different machines.
Does anyone know whether connecting to two different installations from one program presents any unusual problems?
Thanks.Unless there is some horrible defect in the MySQL JDBC driver (which I doubt!), there should be no problem and like the other poster says, please post snippits of your code so we can see what your doing...
Maybe you are looking for
-
How can I print a list of iTunes albums only, without songs?
Itunes offers printing of albums but, what I get is a list of my 500 classical music albums and all the songs/tracks therein. Whereas I want to print only an alphabetical list of my albums, no songs. Better yet I would like to print a list of all my
-
Issue in Material creation from BAPI
Hi All, I am working on Mass material upload from the program using BAPI function module: BAPI_MATERIAL_SAVEDATA. But the problem is for Material Type 'Finished Product' I could get all the views from the structure BAPIMATHEAD except for views Oil-sp
-
My game center has been craked and take my game what should i do ?
pliz help me i play the game for 1 year
-
Safari 5 does not display DIV properly - had to downgrade to 4.0.5
Say you have a web page with Then some JavaScript code later: document.getElementByID('div_a').style.display='inline'; Works fine under Safari 4.0.5 (and other browsers), ie the DIV content is displayed. DIV is not displayed under Safari 5. No JS err
-
Query on BE, Tcode and GL accounts
Hi Friends 1. surrogate bidding and proxy bidding: Are these performed by both BE and LAC.Is proxy bidding done by LAC only. 2.Tcode for GUI of CCM and SUS 3.Which version of srm supports multiple g/l accounts Regards Simha