Exporting to excel..error in using excel easy table.vi
Hi...
Am using excel easy table.vi to export my data to excel.....it contains a date field...When exported to excel,the date and month is getting interchenged.
ie,05/03/2008 is converted as 03/05/2008...What is the work around for this?
i read in one of the posts that have to format the date filed using Excel Set cell Format.vi..I tried wth that ,but so far cudnt fix...i tried wth using @ in the number format..then i was getting a string instead of datetime.When used%d/%m/%Y..then i was getting error.
If i can use that,how do i.
My datetime filed is the first column in the 2D array.
Thanks in advance...
Hi,
Excel handles date and time as a floating point decimal representation. The integral value (to the left of the decimal) represents the number of days since the beginning of the 20th century. The decimal value represents the time of day from midnight in seconds divided by 86,400 (i.e. 6:00:00PM = 0.75).
Excel chooses the default regional date format (i.e. MM/DD/YYYY, DD/MM/YYYY, etc.) based on your current location setting. You can manually change the format of a particular cell by right clicking on any cell and selecting 'Format Cells', then selecting 'Date', and finally changing the 'Locale (location)' to the desired format. This allows you to format the date however you'd like.
Unfortunately, Microsoft Excel does not have a text function to programatically change the 'Locale (location)' setting for a cell. This means that if you need to send a date through the Report Generation Toolkit that is in a format different from the current location setting, you will need to convert the date representation to text. This will change the way Excel handles the cell data from the date format mentioned above to a simple text sting. For example, if you're trying to convert the date '12/24/2008' in cell A1 into '24/12/2008', you can use the following code:
=TEXT(A1,"dd/mm/yyyy")
If you try to keep the cell formatted as a date, Excel will interpret '24' as a month and '12' as a date, which results in an incorrect date. There is no easy way to programatically convert this text string back into a date without manually changing the date format of the cell.
Credit: Ganesh Ganeshkumar
Regards, Kate
Similar Messages
-
Getting error 3001 when using Excel Easy Table.vi
When making a call to Excel Easy Table.vi (Report Generation Toolkit) I get a 3001 error.
I have attached an example VI to demonstrate the problem. Please run "Add Table Example.vi" in the attached zip. This sample program is made up of VIs from a larger program, so it made more sense to create a sample program and only include the required VIs than include the entire large program. So that is why the Report class wire comes from a functional global VI.
What is a bit strange is that Excel Easy Table is used to write a summary table at the top of the spreadsheet successfully in "Initialize Report.vi." It is only when I then make the additional call to Excel Easy Table in Add Table Example that I get the 3001 error. If you have any ideas why I'm getting the 3001 error, please let me know.
I'm using LabVIEW 8.6 and RGTK 1.1.4.
Thanks,
Joel
Solved!
Go to Solution.
Attachments:
Add Table Example.zip 113 KBHey Joel,
I figured out why this error was occuring. After comparing how you were adding the columns in the Report Write Info Table.vi in the Initialize Report.vi to just using the Excel Easy table VI, you hadn't provided a reference to which worksheet it needed to write the data to. I changed your code to include this reference and it worked perfectly without any errors. I have attached a .zip file with those changes so you can look at it.
FYI: Don't try to use this code as a direct replacement with yours. In order for me to reproduce the error, I had to modify several VIs in order to get it to run.
I hope this information helps you with it.
Jim St
National Instruments
RF Product Support Engineer
Attachments:
Add Table Example.zip 146 KB -
Error code -2146827284 when Excel easy Table.vi is used
Hi all,
I met an error (-2146827284 )when i used "excel easy table.vi" in the generate report path. the problem occured when i passed the array with an element which is string length 1392.
Pls advise
ThanksVerify that the file path is correct and that you are not sending data to a location that has not been allocated yet.
I'm not sure I understand what you mean by the array with the string length of 1392... Do you mean that you are trying to write to a single cell a string which is 1392 characters long? If so, I don't think Excel supports such a long string for a single cell.. But I probably misunderstood something.. -
Export to excel pivot table is incorrect
Hi All,
I have a problem when export Discoverer Plus report to Excel Pivot table...
My problem is calculation field (ex. Average salary per employee) in pivot table shown incorrect
data.
May someone has any idea for this problem and how to solve it.
Thanks,
Mcka
Remark: I have info. about Discoverer version that I use
OracleBI Discoverer 10g (10.1.2.2)
Oracle Business Intelligence Discoverer Plus 10g (10.1.2.54.25)
Discoverer Model - 10.1.2.54.25
Discoverer Server - 10.1.2.54.25
End User Layer - 5.1.1.0.0.0
End User Layer Library - 10.1.2.54.25Have anybody share idea about this problem ?
-
Export to excel iview table data of a standard application with out BAPI
Hi All,
I am Editing Standard Application. In that i need to add a button, on clicking that the data present in that iview table to be exported to excel.
The table contains editable & non editable fields. The context attributes are under in different nodes. OADP is used to get all the attribute values of the table.
We have faced problems in identifying OADP attributes. Because of this, we have used seperate BAPI to group all the attributes of the table. By using this BAPI, We are successful in exporting the table data to excel
Could you please provide a solution to export the table data to excel from iview directly with out going to BAPI.
Thanks,Hi Challa,
We have a similar requirement and are not able to find the node or attributes of the planning table.
Can you let us know how you went about doing this? Which are the nodes or attributes? Any help is appreciated..
Thanks & Regards,
Malita Fernandes -
Export to Excel - Multiple Tables in a single details section
Hi All,
I have a set of reports where I am using a single details section to show multiple tables stacked over one another. That is, i have a table with three columns and two rows, followed by some white space and then another table with 4 columns and 1 row, followed by white space and then other tables.
When I export it to excel, I am getting the data but the ordering is in a reverse pivoted fashion:
Excel output:
CR_column1_Heading CR_Column2_Heading CR_Column1_Data CR_Column2_Data
Is there a way to control the sequence of fields displayed in excel while exporting?
Thanks.
- Atif.@Carl,
It is printing like this.
HEADER1 HEADER2 HEADER3 DATA 1 DATA 2 DATA 3
I am getting all the columns and fields in excel, that is not a problem. However, the problem is whether i can control the order the fields are printed onto Excel.
Like what Ben is commenting:
HEADER1 DATA 1 HEADER2 DATA 2 HEADER3 DATA 3
However, I dont want to reorder the fields on the canvas as the format layout is predefined.
I tried searching through the Cystal SDK if there is a finer level of control but to no avail.
A work around under the above constraints would be simply amazing!
Thanks again and appreciate your response.
Regards,
Atif. -
2nd attempt pdf export: I.O. error - in use by another process.
I am using vb.net 2008 with the bundled crystal reports.
I open a report in a CR viewer and have a button to export the rept to pdf and then email it. (using the DiskFileDestinationOptions() and rpt.exportoptions) All works fine. However, if user presses the button to do the email again (same rpt is still in viewer), I get the error:
system.IO.IO. exception. The process cannot access the file (myfile.pdf ) because it is being used by another process.
I found a post that said to close the report and the DiskFileDestinationOptions after the export but that does not solve the problem. I think it relates to the email with the pdf as an attachment.
The only way to solve this so far is to exit the viewer and create the report again.
What can I do to leave the viewer open and email more than once.As an FYI for anyone that may find this thread while searching for export to mapi. I am copying a link to a blog that has the code for export to mapi:
https://www.sdn.sap.com/irj/scn/weblogs?blog=/cs/junior/view/wlg/12157
Ludek -
Web ADI Error when using column from table which can be NULL as parameter
Hi
We have a custom integrator which queries the records and downloads into excel sheet. There is parameter list attached to it. One of the parameter is on a field which can have NULL. When we try running the ADI , we are getting the error :
Fatal error: Please have your system administrator view the bne.log file.
java.lang.NullPointerException
Please contact your support representative
Please help.
Regards,
Pradeep.<BLOCKQUOTE><font size="1" face="Verdana, Arial, Helvetica">quote:</font><HR>Originally posted by Stefan Misch ([email protected]):
Yep - if you try:
create unique index XAK2_A_ARTIKEL
on A_ARTIKEL(CUST_ID, EXTERNAL_ID);
I get error ORA-01452, because of duplicate keys. I verified, that within a each CUST_ID, there is no duplicate non-null EXTERNAL_ID, but there are lots of rows for each CUST_ID where EXTERNAL_ID is NULL.
Thanks for your help.
Stefan<HR></BLOCKQUOTE>
Create a view on your table, that you will use for inserts.
Then, create a trigger INSTEAD OF INSERT on your view. You can perform the checks for uniqueness in it...
Hope this will help...
Thomas.
null -
Hi All,
We used report generation tool kit to generate the report on word and with other API 's under it,we get good reports .
But when the data points are more (> 100 on all channels) it take a long time to write all data and create a table in the word and generate report.
Any sugegstions how to make this happen in some seconds .
Please assist.Well, I just tried my suggestion. I simulated a 24-channel data producer (I actually generated 25 numbers -- the first number was the row number, followed by 24 random numbers) and generated 100 of these for a total of 2500 double-precision values. I then saved this table to Excel and closed the file. I then opened Word (all using RGT), wrote a single text line "Text with Excel", inserted the previously-created "Excel Object", and saved and closed Word.
First, it worked (sort of). The Table in Word started on a new page, and was in a very tiny font (possibly trying to fit 25 columns on a page? I didn't inspect it very carefully). This is probably "too much data" to really try to write the whole table, unless you format it for, say, 3 significant figures.
Now, timing. I ran this four times, two duplicate sets, one with Excel and Word in "normal" mode, one in "minimized". To my surprise, this didn't make a lot of difference (minimized was less than 10% faster). Here are the approximate times:
Generate the data -- about 1 millisecond.
Write the Excel Report -- about 1.5 seconds
Write the Word Report -- about 10.5 seconds
Seems to me this is way faster than trying to do this directly in Word.
Bob Schor -
Hi, i am getting an error while using the External Table.
Hi,
I am getting the below error. External table has been created successfully and when I read the data from the external table i get the below error. Can anyone give solution of this error.
ORA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
KUP-04063: unable to open log file EXT_ZPP0A871_6738.log
OS error Permission denied
ORA-06512: at "SYS.ORACLE_LOADER", line 19
Thanks,
HimanshuKUP-04063: unable to open log file EXT_ZPP0A871_6738.log
OS error Permission deniedThe error seems quite clear... what's you OS and Oracle version ? -
Java Error while Using GLobal Temporary Tables
Hi,
Am having a global temporary table in my application with ON COMMIT DELETE ROWS option.
I use it in a procedure to remove previous records, populate new ones and return a ref cursor
Am calling this procedure from a java bean. In this call, the procedure gets executed successfully but when i try to access the RefCursor Object, I get an SQL Exception that the object no longer exists.
Here are some inputs for reference:
My DB Call:
cstmt = myConn.prepareCall ("{ call MYPACKAGE.GTT_PROCEDURE(?,?,?,?,?, ?,?,?,?,?, ?,?,?,?,?)}");
My RefCursor Access:
rsRuleSet = (ResultSet)cstmt.getObject(11);
The SQLException:
java.sql.SQLException: ORA-08103: object no longer exists
Please note that the SQLException shown as per Java Stack trace is on the line with the RefCursor Access
If anybody has any idea, then do reply
Thanks in Advance,
PiyushA couple of thoughts...
Have you tried calling this procedure from PL/SQL to verify that the REF CURSOR returned is valid?
Is your Java application set to autocommit, or do handle transactions yourself. If the container is handling transactions, it may committing as soon as the stored procedure finishes running, which would clear your temp table.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC -
500 Internal server error on Export to Excel
Hello All,
I have implemented Export to Excel using this tutorial:
http://wiki.sdn.sap.com/wiki/display/Snippets/WebDynproJava-ExportingTableDataUsingOn-DemandStreams-SAPNW+7.0
However, after deploying the application, it simply throws 500 internal server error. I have followed each step carefully but I guess something is missing or I am doing it wrongly. How should I go about resovling this issue? I have been trying to fix this since yesterday and yet no success.
As it is failing right after the deployment that means doInit() method of my view is not able to execute the method mentioned below:
wdThis.wdGetExportExcelCompInterface().initialize(wdContext.nodeVn_OutputTable(), getColumnInfos());
I have defined getColumnInfos() method in the view but not sure why it is failing? Any thoughts on this? Has anyone implemented this? If not, please direct me to some simple export to excel code snippet or document. I have been struggling to implement simple Export to Excel on table. (I am not using RFC. The data is coming from KM APIs)
AmeyaDear Ameya,
For Comunication between DC's, you should use the other DC's as Used Webdypro Component. If you are using with different scenario with webdynpro reference, then please have a look at below document might help to resolve your issue.
http://help.sap.com/saphelp_nw70/helpdata/en/42/9ddf20bb211d72e10000000a1553f6/content.htm
Adding a WebDynpro DC as used Component to a portal app
Using Development Components in WebDynpro components - runtime failures
Best Regards
Arun Jaiswal -
After Export to Excel File error while opening using xmlwriter in silverlight
Can one help me in fixing following issue after to export to excel had done iam getting following error message
"The file you are trying to open, 'test.xls', is in a different format than specified by the file extension. Verify that the file is not corrupted and is from a trusted source before opening the file. Do uou want to open the file now ?"
If i click Yes file opens correctly but it shows above message . Can any one suggest me how to avoid this programatically with the following code.
I tried by changing the file saving as .xls to .xlsx but it doesnt works.
Public Sub Export()
Dim ss As String = "urn:schemas-microsoft-com:office:spreadsheet"
Dim DataType As String
Dim DataValue As Object
'Dim DataView As C1.Silverlight.Data.DataView = m_DataGrid.ItemsSource
'Dim ItemsSource As C1.Silverlight.Data.DataTable = DataView.Table
Dim XmlSettings As XmlWriterSettings
Dim ColumnBinding As Binding
Dim FieldName As String
Dim DataGridColumn As C1.Silverlight.DataGrid.DataGridColumn
Dim ColumnIndex As Integer
Dim J As Integer
Dim DataGridRow As C1.Silverlight.DataGrid.DataGridRow
Dim CommonUtil As New GoldCRM.Core.Common.Util
Dim PropertyInfo As System.Reflection.PropertyInfo
Dim CellFormat As String
Try
If m_DataGrid.Rows.Count = 0 Then Exit Try
XmlSettings = New XmlWriterSettings
XmlSettings.Indent = True
XmlSettings.NewLineOnAttributes = False
Using myXML As XmlWriter = XmlWriter.Create(m_Stream, XmlSettings)
With myXML
.WriteStartDocument()
.WriteProcessingInstruction("mso-application", "progid=" & ControlChars.Quote & "Excel.Sheet" & ControlChars.Quote)
.WriteStartElement("Workbook", ss)
.WriteStartElement("DocumentProperties", "urn:schemas-microsoft-com:office:office")
.WriteElementString("Author", m_DocumentProperties.Author)
.WriteElementString("LastAuthor", String.Format("{0} {1}", Application.Current.Resources("EmpFirstName"), Application.Current.Resources("EmpLastName")))
.WriteElementString("Created", m_DocumentProperties.Created)
.WriteElementString("LastSaved", m_DocumentProperties.LastSaved)
.WriteElementString("Company", Application.Current.Resources("REPORTINGSITENAME"))
.WriteElementString("Version", m_DocumentProperties.Version)
.WriteEndElement() 'Document Properties
.WriteStartElement("ExcelWorkbook", "urn:schemas-microsoft-com:office:excel")
.WriteElementString("WindowHeight", m_WorkbookProperties.WindowHeight)
.WriteElementString("WindowWidth", m_WorkbookProperties.WindowWidth)
.WriteElementString("WindowTopX", m_WorkbookProperties.WindowTopX)
.WriteElementString("WindowTopY", m_WorkbookProperties.WindowTopY)
.WriteElementString("ProtectStructure", m_WorkbookProperties.ProtectStructure)
.WriteElementString("ProtectWindows", m_WorkbookProperties.ProtectWindows)
.WriteEndElement() 'Excel Workbook
.WriteStartElement("Styles")
For I As Integer = 0 To m_Styles.Count - 1
.WriteStartElement("Style")
.WriteAttributeString("ss", "ID", ss, m_Styles(I).ID)
If m_Styles(I).Name <> "" Then
.WriteAttributeString("ss", "Name", ss, m_Styles(I).Name)
End If
'ALIGNMENT LOGIC:
.WriteStartElement("Alignment")
If Not m_Styles(I).Alignment Is Nothing Then
If m_Styles(I).Alignment.Horizontal <> 0 Then
.WriteAttributeString("ss", "Horizontal", ss, m_Styles(I).Alignment.Horizontal.ToString)
End If
If m_Styles(I).Alignment.Vertical <> 0 Then
.WriteAttributeString("ss", "Vertical", ss, m_Styles(I).Alignment.Vertical.ToString)
End If
If m_Styles(I).Alignment.WrapText = True Then
.WriteAttributeString("ss", "WrapText", ss, "1")
End If
End If
.WriteEndElement()
'BORDER LOGIC:
.WriteStartElement("Borders")
.WriteStartElement("Border")
.WriteAttributeString("ss", "Position", ss, "Bottom")
.WriteAttributeString("ss", "LineStyle", ss, "Continuous")
.WriteAttributeString("ss", "Weight", ss, "1")
.WriteEndElement() 'Border
.WriteStartElement("Border")
.WriteAttributeString("ss", "Position", ss, "Left")
.WriteAttributeString("ss", "LineStyle", ss, "Continuous")
.WriteAttributeString("ss", "Weight", ss, "1")
.WriteEndElement() 'Border
.WriteStartElement("Border")
.WriteAttributeString("ss", "Position", ss, "Right")
.WriteAttributeString("ss", "LineStyle", ss, "Continuous")
.WriteAttributeString("ss", "Weight", ss, "1")
.WriteEndElement() 'Border
.WriteStartElement("Border")
.WriteAttributeString("ss", "Position", ss, "Top")
.WriteAttributeString("ss", "LineStyle", ss, "Continuous")
.WriteAttributeString("ss", "Weight", ss, "1")
.WriteEndElement() 'Border
.WriteEndElement() 'Borders
'FONT LOGIC:
.WriteStartElement("Font")
Dim myFont As Excel.Styles.Font = m_Styles(I).Font
.WriteAttributeString("ss", "FontName", ss, myFont.FontName.ToString)
.WriteAttributeString("ss", "Size", ss, myFont.Size)
.WriteAttributeString("ss", "Color", ss, myFont.Color.ToString.Remove(1, 2))
If myFont.Bold = True Then .WriteAttributeString("ss", "Bold", ss, "1")
If myFont.Italic = True Then .WriteAttributeString("ss", "Italic", ss, "1")
If myFont.Underline <> 0 Then .WriteAttributeString("ss", "Underline", ss, myFont.Underline.ToString)
.WriteEndElement()
Dim myInterior As Excel.Styles.Interior = m_Styles(I).Interior
.WriteStartElement("Interior")
.WriteAttributeString("ss", "Color", ss, myInterior.Color.ToString.Remove(1, 2))
.WriteAttributeString("ss", "Pattern", ss, "Solid")
.WriteEndElement()
.WriteStartElement("NumberFormat")
.WriteEndElement()
.WriteStartElement("Protection")
.WriteEndElement()
.WriteEndElement() 'Style
Next I
.WriteStartElement("Style")
.WriteAttributeString("ss", "ID", ss, "DateStyle")
.WriteStartElement("NumberFormat")
.WriteAttributeString("ss", "Format", ss, "General Date")
.WriteEndElement() 'NumberFormat
.WriteEndElement() 'Style
.WriteStartElement("Style")
.WriteAttributeString("ss", "ID", ss, "HeaderStyle")
.WriteStartElement("Font")
.WriteAttributeString("x", "Family", ss, "Swiss")
.WriteAttributeString("ss", "Bold", ss, "1")
.WriteEndElement() 'Font
.WriteEndElement() 'Style
.WriteEndElement() 'Styles
'WORKSHEETS:
.WriteStartElement("Worksheet")
.WriteAttributeString("ss", "Name", ss, "WORKSHEET")
.WriteStartElement("Table")
.WriteAttributeString("ss", "ExpandedColumnCount", ss, m_DataGrid.Columns.Count)
.WriteAttributeString("ss", "ExpandedRowCount", ss, m_DataGrid.Rows.Count + 100) 'Temporary fix: sometimes 1 row is not added.
.WriteAttributeString("ss", "FullColumns", ss, m_DataGrid.Columns.Count)
.WriteAttributeString("ss", "FullRows", ss, m_DataGrid.Rows.Count + 100) 'Temporary fix: sometimes 1 row is not added.
.WriteAttributeString("ss", "DefaultRowHeight", ss, 15)
For Each DataGridColumn In m_DataGrid.Columns
If DataGridColumn.Visibility = Visibility.Visible Then
.WriteStartElement("Column")
If TypeOf DataGridColumn Is C1.Silverlight.DataGrid.DataGridNumericColumn Then
.WriteAttributeString("ss", "AutoFitWidth", ss, 1)
ElseIf TypeOf DataGridColumn Is C1.Silverlight.DataGrid.DataGridDateTimeColumn Then
.WriteAttributeString("ss", "AutoFitWidth", ss, 1)
Else
.WriteAttributeString("ss", "AutoFitWidth", ss, 0)
End If
If DataGridColumn.Width.Value <= 100 Then
.WriteAttributeString("ss", "Width", ss, 100)
Else
.WriteAttributeString("ss", "Width", ss, DataGridColumn.Width.Value)
End If
.WriteEndElement()
End If
Next
J = 0
For Each DataGridRow In m_DataGrid.Rows
J += 1
If TypeOf DataGridRow Is GoldCRM.Controls.Filter.clsFilterRow Then
.WriteStartElement("Row")
.WriteAttributeString("ss", "Index", ss, J)
.WriteAttributeString("ss", "AutoFitHeight", ss, 0)
.WriteAttributeString("ss", "Height", ss, 15)
ColumnIndex = 0
For Each DataGridColumn In m_DataGrid.Columns
If DataGridColumn.Visibility = Visibility.Visible Then
FieldName = String.Empty
If TypeOf DataGridColumn Is DataGridBoundColumn Then
ColumnBinding = TryCast(DataGridColumn, DataGridBoundColumn).Binding
If ColumnBinding.Path IsNot Nothing Then
FieldName = ColumnBinding.Path.Path
End If
ElseIf TypeOf DataGridColumn Is DataGridTemplateColumn Then
If DataGridColumn.FilterMemberPath IsNot Nothing Then
FieldName = DataGridColumn.FilterMemberPath.Trim
End If
End If
If Not FieldName.Equals(String.Empty) Then
ColumnIndex += 1
.WriteStartElement("Cell")
.WriteAttributeString("ss", "Index", ss, ColumnIndex)
.WriteAttributeString("ss", "MergeAcross", ss, 0)
.WriteAttributeString("ss", "StyleID", ss, "HeaderStyle")
.WriteStartElement("Data")
.WriteAttributeString("ss", "Type", ss, "String")
If DataGridColumn.Header IsNot Nothing Then
.WriteValue(DataGridColumn.Header.ToString)
Else
.WriteValue("")
End If
.WriteEndElement() 'Data
.WriteEndElement() 'Cell
End If
End If
Next
.WriteEndElement() 'Row
End If
If Not (TypeOf DataGridRow Is GoldCRM.Controls.Filter.clsFilterRow) Then
.WriteStartElement("Row")
.WriteAttributeString("ss", "Index", ss, J + 1)
.WriteAttributeString("ss", "AutoFitHeight", ss, 0)
.WriteAttributeString("ss", "Height", ss, 15)
ColumnIndex = 0
For Each DataGridColumn In m_DataGrid.Columns
If DataGridColumn.Visibility = Visibility.Visible Then
FieldName = String.Empty
If TypeOf DataGridColumn Is DataGridBoundColumn Then
ColumnBinding = TryCast(DataGridColumn, DataGridBoundColumn).Binding
If ColumnBinding.Path IsNot Nothing Then
FieldName = ColumnBinding.Path.Path
End If
ElseIf TypeOf DataGridColumn Is DataGridTemplateColumn Then
If DataGridColumn.FilterMemberPath IsNot Nothing Then
FieldName = DataGridColumn.FilterMemberPath.Trim
End If
End If
If Not FieldName.Equals(String.Empty) Then
ColumnIndex += 1
Dim DataCellValue As Object = Nothing
If Not (TypeOf DataGridRow Is GoldCRM.Controls.Filter.clsFilterRow) Then
PropertyInfo = CommonUtil.GetProperty(DataGridRow.DataItem, FieldName)
If PropertyInfo IsNot Nothing Then
DataCellValue = PropertyInfo.GetValue(DataGridRow.DataItem, Nothing)
End If
End If
CellFormat = String.Empty
If DataCellValue IsNot Nothing Then
Select Case DataCellValue.GetType.Name.ToUpper
Case "BitmapImage".ToUpper
DataValue = "Image"
DataType = "String"
Case "Hyperlink".ToUpper
DataType = "String"
DataValue = "Hyperlink"
Case "Decimal".ToUpper
DataType = "Number"
DataValue = DataCellValue
Case "DateTime".ToUpper
If CType(DataCellValue, Date).Year > 1900 Then
DataType = "DateTime"
DataValue = DataCellValue
CellFormat = "DateStyle"
Else
DataType = "String"
DataValue = DataCellValue
End If
Case Else
DataType = "String"
DataValue = DataCellValue
End Select
Else
DataType = "String"
DataValue = String.Empty
End If
.WriteStartElement("Cell")
.WriteAttributeString("ss", "Index", ss, ColumnIndex)
.WriteAttributeString("ss", "MergeAcross", ss, 0)
If Not CellFormat.Equals(String.Empty) Then
.WriteAttributeString("ss", "StyleID", ss, CellFormat)
End If
.WriteStartElement("Data")
.WriteAttributeString("ss", "Type", ss, DataType)
.WriteValue(DataValue)
.WriteEndElement() 'Data
.WriteEndElement() 'Cell
End If
End If
Next
.WriteEndElement() 'Row
End If
Next
.WriteEndElement() 'Table
.WriteEndElement() 'Worksheet
.WriteEndElement() 'Workbook
.WriteEndDocument()
.Close()
End With
End Using
Catch ex As Exception
Throw New Exception(ex.Message, ex)
Finally
If m_Stream IsNot Nothing Then
m_Stream.Close()
m_Stream.Dispose()
End If
m_Stream = Nothing
m_DataGrid.IsLoading = False
DataValue = Nothing
'DataView = Nothing
'ItemsSource = Nothing
XmlSettings = Nothing
ColumnBinding = Nothing
DataGridColumn = Nothing
End Try
End Sub
KrishnaHi,
i have the same issue now where i need to populate the xport file name as report name. can you send me your solution please. -
Crystal Report: Error while Export to Excel
We are using combination of Crystal Report 10 With
J2EE, Below source code is working fine While
exporting to PDF, MSWord, RTF format.
if(selectedFormat.equals("MSWORD"))
exportOptions.setExportFormatType(ReportExportFormat.MSWord);
if(iPageFrom>0 && iPageTo>0)
RTFWordExportFormatOptions RTFExpOpts=new
RTFWordExportFormatOptions();
RTFExpOpts.setStartPageNumber(iPageFrom);
RTFExpOpts.setEndPageNumber(iPageTo);
exportOptions.setFormatOptions(RTFExpOpts);
But am getting following error while exporting report
to Excel
com.crystaldecisions.report.web.viewer.ReportExportControl
Invalid post back event : {0}
We would like to know, Is SDK feasible for exporting
to excel or not ?
If yes! then Please suggest us for same.
Thanks In advance :)I will make sure that I am on the latest patch ie SP4
https://smpdl.sap-ag.de/~sapidp/012002523100008782452011E/cr2008sp4.exe
You can find the rumtimes here:
MSI:
https://smpdl.sap-ag.de/~sapidp/012002523100008782532011E/cr2008sp4_redist.zip
MSM:
https://smpdl.sap-ag.de/~sapidp/012002523100008782522011E/cr2008sp4_mm.zip
ClickOnce
https://smpdl.sap-ag.de/~sapidp/012002523100008782442011E/cr2008sp4_clickonce.zip
Recompile the app and then deploy.
What is the .NET Framework used by the application?
Method of deployment?
OS where app is deployed, x86 or x64?
Are you able to export the report from designer ie CR2008 Standalone?
- Saurabh -
Getting error while export to excel
I have a report which following exprort to excel. I am following http://deneskubicek.blogspot.com/2007/03/export-to-excel-instaad-of-csv-or-txt.html
above link example. In the read me file they mentioned that
• If the reports have a group by clause included, you need to modify the package and use v(‘ITEM’) syntax instead of (SELECT v(‘ITEM’) FROM DUAL):
I found "from dual" statement in package at one place so how can i modify the query as per the above statment. I am getting the actual error as below.
v_sql :=
REPLACE (v_sql,
UPPER (v_names (i)),
'(SELECT v('''
|| LTRIM (v_names (i), ':')
|| ''') FROM DUAL)'
Report Values Error: ORA-06550: Zeile 1, Spalte 170: PL/SQL: ORA-00936: Ausdruck fehlt ORA-06550: Zeile 1, Spalte 162: PL/SQL: SQL Statement ignored / -6550 / select from ( SELECT FACILITY_ID ,PROJECT_NUMBER ,AWARD_NUMBER ,MAX(AWARD_SHORT_NAME) ,MAX(TASK_NUMBER) TASK_NUMBER ,MAX(BOND_PROCEEDS) BOND_PROCEEDS ,MAX(PROJ_OWNING_CATEGORY) PROJ_OWNING_CATEGORY ,MAX(SCHOOL_DEPT) SCHOOL_DEPT ,MAX(GA_PPU_PERC) GA_PPU_PERC ,MAX(GA_SERA_PPU_PERC) GA_SERA_PPU_PERC ,MAX(GA_MATCH_SERA_PPU_PERC) GA_MATCH_SERA_PPU_PERC ,MAX(CURR_EXPENDITURE_GIFT) CURR_EXPENDITURE_GIFT ,MAX(CURR_EXPENDITURE_UNIV) CURR_EXPENDITURE_UNIV ,MAX(CURR_EXPENDITURE_EQTY) CURR_EXPENDITURE_EQTY ,MAX(SUBTOTAL_14) SUBTOTAL_14 ,MAX(TOTAL_DEBT_DRAW_AMT_TE) TOTAL_DEBT_DRAW_AMT_TE ,MAX(OTHER_TOTAL_DEBT_DRAW_AMT_TE) OTHER_TOTAL_DEBT_DRAW_AMT_TE ,MAX(SUBTOTAL_17) SUBTOTAL_17 ,MAX(SUBTOTAL_18) SUBTOTAL_18 ,MAX(GIFT_EQTY_PERCENT) GIFT_EQTY_PERCENT ,MAX(UNIV_EQTY_PERCENT) UNIV_EQTY_PERCENT ,MAX(NON_TE_EQTY_PERCENT) NON_TE_EQTY_PERCENT ,MAX(subtotal_22) subtotal_22 ,MAX(CURR_TE_BOND_PERCENT) CURR_TE_BOND_PERCENT ,MAX(OTH_TE_BOND_PERCENT) OTH_TE_BOND_PERCENT ,MAX(SUBTOTAL_25) SUBTOTAL_25 ,MAX(organized_research_sqft) organized_research_sqft ,MAX(ga_sera_ppu_sqft) ga_sera_ppu_sqft ,MAX(dept_research_sqft) dept_research_sqft ,MAX(nse_sqft) nse_sqft ,MAX(common_sqft) common_sqft ,MAX(name_sqft) name_sqft ,MAX(other_sqft) other_sqft ,MAX(SUBTOTAL_36) SUBTOTAL_36 ,MAX(PI_ROOM_SQFT) PI_ROOM_SQFT ,MAX(Total_BLDG_SQFT) Total_BLDG_SQFT ,MAX(organized_research_perc) organized_research_perc ,MAX(ga_sera_ppu_percent) ga_sera_ppu_percent ,MAX(dept_research_perc) dept_research_perc ,MAX(nse_perc) nse_perc ,MAX(common_perc) common_perc ,MAX(name_perc) name_perc ,MAX(other_perc) other_perc ,MAX(Total_Bldg_perc) Total_Bldg_perc ,MAX(fed_state_spo_res_flag) fed_state_spo_res_flag ,MAX(corporate_spo_flag) corporate_spo_flag ,MAX(ppu_flag) ppu_flag ,MAX(in_service_date) in_service_date ,MAX(demolished) demolished from (select AWARD_SHORT_NAME ,AWARD_NUMBER ,PROJECT_NUMBER ,TASK_NUMBER ,TOTAL_DEBT_DRAW_AMT_TE+TOTAL_DEBT_DRAW_AMT_TX BOND_PROCEEDS ,PROJ_OWNING_CATEGORY ,SCHOOL_DEPT ,FACILITY_ID ,GA_PPU_PERC ,GA_SERA_PPU_PERC ,GA_MATCH_SERA_PPU_PERC ,CURR_EXPENDITURE_GIFT ,CURR_EXPENDITURE_UNIV ,CURR_EXPENDITURE_EQTY ,CURR_EXPENDITURE_GIFT+CURR_EXPENDITURE_UNIV+CURR_EXPENDITURE_EQTY as SUBTOTAL_14 ,TOTAL_DEBT_DRAW_AMT_TE ,OTHER_TOTAL_DEBT_DRAW_AMT_TE ,TOTAL_DEBT_DRAW_AMT_TE+OTHER_TOTAL_DEBT_DRAW_AMT_TE SUBTOTAL_17 ,CURR_EXPENDITURE_GIFT+CURR_EXPENDITURE_UNIV+CURR_EXPENDITURE_EQTY+TOTAL_DEBT_DRAW_AMT_TE+OTHER_TOTAL_DEBT_DRAW_AMT_TE SUBTOTAL_18 ,GIFT_EQTY_PERCENT ,UNIV_EQTY_PERCENT ,NON_TE_EQTY_PERCENT ,GIFT_EQTY_PERCENT+UNIV_EQTY_PERCENT+NON_TE_EQTY_PERCENT as subtotal_22 ,CURR_TE_BOND_PERCENT ,Case when (CURR_EXPENDITURE_GIFT+CURR_EXPENDITURE_UNIV+CURR_EXPENDITURE_EQTY+TOTAL_DEBT_DRAW_AMT_TE+OTHER_TOTAL_DEBT_DRAW_AMT_TE)<>0 THEN round(abs((OTHER_TOTAL_DEBT_DRAW_AMT_TE*100 )/(CURR_EXPENDITURE_GIFT+CURR_EXPENDITURE_UNIV+CURR_EXPENDITURE_EQTY+TOTAL_DEBT_DRAW_AMT_TE+OTHER_TOTAL_DEBT_DRAW_AMT_TE)),2) --DIVISOR EQUAL TO ZERO ELSE 0 END AS OTH_TE_BOND_PERCENT ,CURR_TE_BOND_PERCENT+Case when (CURR_EXPENDITURE_GIFT+CURR_EXPENDITURE_UNIV+CURR_EXPENDITURE_EQTY+TOTAL_DEBT_DRAW_AMT_TE+OTHER_TOTAL_DEBT_DRAW_AMT_TE)<>0 THEN round(abs((OTHER_TOTAL_DEBT_DRAW_AMT_TE*100 )/(CURR_EXPENDITURE_GIFT+CURR_EXPENDITURE_UNIV+CURR_EXPENDITURE_EQTY+TOTAL_DEBT_DRAW_AMT_TE+OTHER_TOTAL_DEBT_DRAW_AMT_TE)),2) --DIVISOR EQUAL TO ZERO ELSE 0 END as SUBTOTAL_25 ,organized_research_sqft ,ga_sera_ppu_sqft ,dept_research_sqft ,nse_sqft ,common_sqft ,name_sqft ,other_sqft ,organized_research_sqft+ga_sera_ppu_sqft+dept_research_sqft+common_sqft+name_sqft+name_sqft+other_sqft SUBTOTAL_36 ,PI_ROOM_SQFT --37 A (SUM OF PIR-ROOM_SQFT) ,sum(PI_ROOM_SQFT) as Total_BLDG_SQFT ,decode(sum(PI_ROOM_SQFT),0,0,round(abs(organized_research_sqft*100/sum(PI_ROOM_SQFT)),2)) AS organized_research_perc ,decode(sum(PI_ROOM_SQFT),0,0,round(abs(ga_sera_ppu_sqft*100/sum(PI_ROOM_SQFT)),2)) AS ga_sera_ppu_percent ,decode(sum(PI_ROOM_SQFT),0,0,round(abs(dept_research_sqft*100/sum(PI_ROOM_SQFT)),2)) AS dept_research_perc ,decode(sum(PI_ROOM_SQFT),0,0,round(abs(nse_sqft*100/sum(PI_ROOM_SQFT)),2)) AS nse_perc ,decode(sum(PI_ROOM_SQFT),0,0,round(abs(common_sqft*100/sum(PI_ROOM_SQFT)),2)) AS common_perc ,decode(sum(PI_ROOM_SQFT),0,0,round(abs(name_sqft*100/sum(PI_ROOM_SQFT)),2)) AS name_perc ,decode(sum(PI_ROOM_SQFT),0,0,round(abs(other_sqft*100/sum(PI_ROOM_SQFT)),2)) AS other_perc ,decode(sum(PI_ROOM_SQFT),0,0,round(abs(organized_research_sqft*100/sum(PI_ROOM_SQFT)),2))-decode(sum(PI_ROOM_SQFT),0,0,round(abs(other_sqft*100/sum(PI_ROOM_SQFT)),2)) AS Total_Bldg_perc--45 ,Case when ga_sera_fed_score>0 then 'Yes' Else 'No' END as fed_state_spo_res_flag ,Case when ga_sera_ct_score>0 or ga_sera_score>0 then 'Yes' Else 'No' END as corporate_spo_flag ,Case when ga_sera_fed_score>0 or ga_sera_ct_score>0 or ga_sera_score>0 then 'Yes' Else 'No' END as ppu_flag ,in_service_date ,demolished from XXDL_CD_PTA_BLDG_LSR_FY_V where project_number=decode((SELECT v('P19_PROJECT') FROM DUAL),'',project_number,(SELECT v('P19_PROJECT') FROM DUAL)) AND FACILITY_ID=decode((SELECT v('P19_FACILITY_ID') FROM DUAL),'',FACILITY_ID,(SELECT v('P19_FACILITY_ID') FROM DUAL)) AND AWARD_NUMBER=decode((SELECT v('P19_AWARD') FROM DUAL),'',AWARD_NUMBER,(SELECT v('P19_AWARD') FROM DUAL)) AND TASK_NUMBER=decode((SELECT v('P19_TOP_TASK') FROM DUAL),'',TASK_NUMBER,(SELECT v('P19_TOP_TASK') FROM DUAL)) Group by AWARD_SHORT_NAME ,AWARD_NUMBER ,PROJECT_NUMBER ,TASK_NUMBER ,TOTAL_DEBT_DRAW_AMT_TE ,TOTAL_DEBT_DRAW_AMT_TX ,PROJ_OWNING_CATEGORY ,SCHOOL_DEPT ,FACILITY_ID ,GA_PPU_PERC ,GA_SERA_PPU_PERC ,GA_MATCH_SERA_PPU_PERC ,CURR_EXPENDITURE_GIFT ,CURR_EXPENDITURE_UNIV ,CURR_EXPENDITURE_EQTY ,TOTAL_DEBT_DRAW_AMT_TE ,OTHER_TOTAL_DEBT_DRAW_AMT_TE ,GIFT_EQTY_PERCENT ,UNIV_EQTY_PERCENT ,NON_TE_EQTY_PERCENT ,CURR_TE_BOND_PERCENT ,organized_research_sqft ,ga_sera_ppu_sqft ,dept_research_sqft ,nse_sqft ,common_sqft ,name_sqft ,other_sqft ,PI_ROOM_SQFT ,ga_sera_fed_score ,ga_sera_ct_score ,ga_sera_score ,in_service_date ,demolished) Group by FACILITY_ID ,PROJECT_NUMBER ,AWARD_NUMBER Order by FACILITY_ID ,PROJECT_NUMBER ,AWARD_NUMBER ASC)Report Values Error: ORA-06550: Zeile 1, Spalte 170: PL/SQL: ORA-00936: Ausdruck fehlt ORA-06550: Zeile 1, Spalte 162: PL/SQL: SQL Statement ignored / -6550 / select from ( SELECT FACILITY_ID ,PROJECT_NUMBER ,AWARD_NUMBER ,MAX(AWARD_SHORT_NAME) ,MAX(TASK_NUMBER) TASK_NUMBER ,MAX(BOND_PROCEEDS) BOND_PROCEEDS ,MAX(PROJ_OWNING_CATEGORY) PROJ_OWNING_CATEGORY ,MAX(SCHOOL_DEPT) SCHOOL_DEPT ,MAX(GA_PPU_PERC) GA_PPU_PERC ,MAX(GA_SERA_PPU_PERC) GA_SERA_PPU_PERC ,MAX(GA_MATCH_SERA_PPU_PERC) GA_MATCH_SERA_PPU_PERC ,MAX(CURR_EXPENDITURE_GIFT) CURR_EXPENDITURE_GIFT ,MAX(CURR_EXPENDITURE_UNIV) CURR_EXPENDITURE_UNIV ,MAX(CURR_EXPENDITURE_EQTY) CURR_EXPENDITURE_EQTY ,MAX(SUBTOTAL_14) SUBTOTAL_14 ,MAX(TOTAL_DEBT_DRAW_AMT_TE) TOTAL_DEBT_DRAW_AMT_TE ,MAX(OTHER_TOTAL_DEBT_DRAW_AMT_TE) OTHER_TOTAL_DEBT_DRAW_AMT_TE ,MAX(SUBTOTAL_17) SUBTOTAL_17 ,MAX(SUBTOTAL_18) SUBTOTAL_18 ,MAX(GIFT_EQTY_PERCENT) GIFT_EQTY_PERCENT ,MAX(UNIV_EQTY_PERCENT) UNIV_EQTY_PERCENT ,MAX(NON_TE_EQTY_PERCENT) NON_TE_EQTY_PERCENT ,MAX(subtotal_22) subtotal_22 ,MAX(CURR_TE_BOND_PERCENT) CURR_TE_BOND_PERCENT ,MAX(OTH_TE_BOND_PERCENT) OTH_TE_BOND_PERCENT ,MAX(SUBTOTAL_25) SUBTOTAL_25 ,MAX(organized_research_sqft) organized_research_sqft ,MAX(ga_sera_ppu_sqft) ga_sera_ppu_sqft ,MAX(dept_research_sqft) dept_research_sqft ,MAX(nse_sqft) nse_sqft ,MAX(common_sqft) common_sqft ,MAX(name_sqft) name_sqft ,MAX(other_sqft) other_sqft ,MAX(SUBTOTAL_36) SUBTOTAL_36 ,MAX(PI_ROOM_SQFT) PI_ROOM_SQFT ,MAX(Total_BLDG_SQFT) Total_BLDG_SQFT ,MAX(organized_research_perc) organized_research_perc ,MAX(ga_sera_ppu_percent) ga_sera_ppu_percent ,MAX(dept_research_perc) dept_research_perc ,MAX(nse_perc) nse_perc ,MAX(common_perc) common_perc ,MAX(name_perc) name_perc ,MAX(other_perc) other_perc ,MAX(Total_Bldg_perc) Total_Bldg_perc ,MAX(fed_state_spo_res_flag) fed_state_spo_res_flag ,MAX(corporate_spo_flag) corporate_spo_flag ,MAX(ppu_flag) ppu_flag ,MAX(in_service_date) in_service_date ,MAX(demolished) demolished from (select AWARD_SHORT_NAME ,AWARD_NUMBER ,PROJECT_NUMBER ,TASK_NUMBER ,TOTAL_DEBT_DRAW_AMT_TE+TOTAL_DEBT_DRAW_AMT_TX BOND_PROCEEDS ,PROJ_OWNING_CATEGORY ,SCHOOL_DEPT ,FACILITY_ID ,GA_PPU_PERC ,GA_SERA_PPU_PERC ,GA_MATCH_SERA_PPU_PERC ,CURR_EXPENDITURE_GIFT ,CURR_EXPENDITURE_UNIV ,CURR_EXPENDITURE_EQTY ,CURR_EXPENDITURE_GIFT+CURR_EXPENDITURE_UNIV+CURR_EXPENDITURE_EQTY as SUBTOTAL_14 ,TOTAL_DEBT_DRAW_AMT_TE ,OTHER_TOTAL_DEBT_DRAW_AMT_TE ,TOTAL_DEBT_DRAW_AMT_TE+OTHER_TOTAL_DEBT_DRAW_AMT_TE SUBTOTAL_17 ,CURR_EXPENDITURE_GIFT+CURR_EXPENDITURE_UNIV+CURR_EXPENDITURE_EQTY+TOTAL_DEBT_DRAW_AMT_TE+OTHER_TOTAL_DEBT_DRAW_AMT_TE SUBTOTAL_18 ,GIFT_EQTY_PERCENT ,UNIV_EQTY_PERCENT ,NON_TE_EQTY_PERCENT ,GIFT_EQTY_PERCENT+UNIV_EQTY_PERCENT+NON_TE_EQTY_PERCENT as subtotal_22 ,CURR_TE_BOND_PERCENT ,Case when (CURR_EXPENDITURE_GIFT+CURR_EXPENDITURE_UNIV+CURR_EXPENDITURE_EQTY+TOTAL_DEBT_DRAW_AMT_TE+OTHER_TOTAL_DEBT_DRAW_AMT_TE)0 THEN round(abs((OTHER_TOTAL_DEBT_DRAW_AMT_TE*100 )/(CURR_EXPENDITURE_GIFT+CURR_EXPENDITURE_UNIV+CURR_EXPENDITURE_EQTY+TOTAL_DEBT_DRAW_AMT_TE+OTHER_TOTAL_DEBT_DRAW_AMT_TE)),2) --DIVISOR EQUAL TO ZERO ELSE 0 END AS OTH_TE_BOND_PERCENT ,CURR_TE_BOND_PERCENT+Case when (CURR_EXPENDITURE_GIFT+CURR_EXPENDITURE_UNIV+CURR_EXPENDITURE_EQTY+TOTAL_DEBT_DRAW_AMT_TE+OTHER_TOTAL_DEBT_DRAW_AMT_TE)0 THEN round(abs((OTHER_TOTAL_DEBT_DRAW_AMT_TE*100 )/(CURR_EXPENDITURE_GIFT+CURR_EXPENDITURE_UNIV+CURR_EXPENDITURE_EQTY+TOTAL_DEBT_DRAW_AMT_TE+OTHER_TOTAL_DEBT_DRAW_AMT_TE)),2) --DIVISOR EQUAL TO ZERO ELSE 0 END as SUBTOTAL_25 ,organized_research_sqft ,ga_sera_ppu_sqft ,dept_research_sqft ,nse_sqft ,common_sqft ,name_sqft ,other_sqft ,organized_research_sqft+ga_sera_ppu_sqft+dept_research_sqft+common_sqft+name_sqft+name_sqft+other_sqft SUBTOTAL_36 ,PI_ROOM_SQFT --37 A (SUM OF PIR-ROOM_SQFT) ,sum(PI_ROOM_SQFT) as Total_BLDG_SQFT ,decode(sum(PI_ROOM_SQFT),0,0,round(abs(organized_research_sqft*100/sum(PI_ROOM_SQFT)),2)) AS organized_research_perc ,decode(sum(PI_ROOM_SQFT),0,0,round(abs(ga_sera_ppu_sqft*100/sum(PI_ROOM_SQFT)),2)) AS ga_sera_ppu_percent ,decode(sum(PI_ROOM_SQFT),0,0,round(abs(dept_research_sqft*100/sum(PI_ROOM_SQFT)),2)) AS dept_research_perc ,decode(sum(PI_ROOM_SQFT),0,0,round(abs(nse_sqft*100/sum(PI_ROOM_SQFT)),2)) AS nse_perc ,decode(sum(PI_ROOM_SQFT),0,0,round(abs(common_sqft*100/sum(PI_ROOM_SQFT)),2)) AS common_perc ,decode(sum(PI_ROOM_SQFT),0,0,round(abs(name_sqft*100/sum(PI_ROOM_SQFT)),2)) AS name_perc ,decode(sum(PI_ROOM_SQFT),0,0,round(abs(other_sqft*100/sum(PI_ROOM_SQFT)),2)) AS other_perc ,decode(sum(PI_ROOM_SQFT),0,0,round(abs(organized_research_sqft*100/sum(PI_ROOM_SQFT)),2))-decode(sum(PI_ROOM_SQFT),0,0,round(abs(other_sqft*100/sum(PI_ROOM_SQFT)),2)) AS Total_Bldg_perc--45 ,Case when ga_sera_fed_score>0 then 'Yes' Else 'No' END as fed_state_spo_res_flag ,Case when ga_sera_ct_score>0 or ga_sera_score>0 then 'Yes' Else 'No' END as corporate_spo_flag ,Case when ga_sera_fed_score>0 or ga_sera_ct_score>0 or ga_sera_score>0 then 'Yes' Else 'No' END as ppu_flag ,in_service_date ,demolished from XXDL_CD_PTA_BLDG_LSR_FY_V where project_number=decode((SELECT v('P19_PROJECT') FROM DUAL),'',project_number,(SELECT v('P19_PROJECT') FROM DUAL)) AND FACILITY_ID=decode((SELECT v('P19_FACILITY_ID') FROM DUAL),'',FACILITY_ID,(SELECT v('P19_FACILITY_ID') FROM DUAL)) AND AWARD_NUMBER=decode((SELECT v('P19_AWARD') FROM DUAL),'',AWARD_NUMBER,(SELECT v('P19_AWARD') FROM DUAL)) AND TASK_NUMBER=decode((SELECT v('P19_TOP_TASK') FROM DUAL),'',TASK_NUMBER,(SELECT v('P19_TOP_TASK') FROM DUAL)) Group by AWARD_SHORT_NAME ,AWARD_NUMBER ,PROJECT_NUMBER ,TASK_NUMBER ,TOTAL_DEBT_DRAW_AMT_TE ,TOTAL_DEBT_DRAW_AMT_TX ,PROJ_OWNING_CATEGORY ,SCHOOL_DEPT ,FACILITY_ID ,GA_PPU_PERC ,GA_SERA_PPU_PERC ,GA_MATCH_SERA_PPU_PERC ,CURR_EXPENDITURE_GIFT ,CURR_EXPENDITURE_UNIV ,CURR_EXPENDITURE_EQTY ,TOTAL_DEBT_DRAW_AMT_TE ,OTHER_TOTAL_DEBT_DRAW_AMT_TE ,GIFT_EQTY_PERCENT ,UNIV_EQTY_PERCENT ,NON_TE_EQTY_PERCENT ,CURR_TE_BOND_PERCENT ,organized_research_sqft ,ga_sera_ppu_sqft ,dept_research_sqft ,nse_sqft ,common_sqft ,name_sqft ,other_sqft ,PI_ROOM_SQFT ,ga_sera_fed_score ,ga_sera_ct_score ,ga_sera_score ,in_service_date ,demolished) Group by FACILITY_ID ,PROJECT_NUMBER ,AWARD_NUMBER Order by FACILITY_ID ,PROJECT_NUMBER ,AWARD_NUMBER ASC)
^
|
|
missing columnyou are missing a column expression in your select statement. scroll to the right to see what i am referring to.
Maybe you are looking for
-
HELP! iTunes crashes everytime I try to open it.
Hi, I need help with this iTunes software. After updating to the new version 7.1, my itunes crashed. And now everytime i try to open it, it comes up with a error M$ reporting popup, and it is unable to give me anymore information. This happens everyt
-
can't scan to the computer but will print and scan to a thumbdrive any idea. when i go to scan to computer it saids offline running win 8
-
Interview questions on XI-- where i was not able to answer
Hi XI Experts Recently i attended <b><u>interview for XI</u></b>...these are the following questions i was not able to answer pls...help on this Q's are 1) Is the BPM must start with receive step ? why? or i can start with any step ? Explai
-
Hi, I want to use the PreparedStatement for a SELECT Query, The SELECT query has a where clause in which there is a condition like: WHERE FIELD_ABC IN (?,?,?) AND FIELD_XYZ=? The number of parameters passed in IN clause are not fixed and they are cha
-
Pass User Picked values to Excel Slicers
Hi, Is there a way to pass values from an external page to an Excel Slicer in a Workbook(which is on sharepoint) through a URL or something? Our Front End Report is a .NET web page, and we want to be able to pass User picked values like Year = 2014,