Extending Employee End Date...urgent!!

Hello
I saw that there is APPS.HR_PERSON_API.This has update_person and update_us_person procedures for extending the end_date of an employee. May I know which one is the correct one to use
please advice
thanks
Edited by: user8612301 on Dec 28, 2011 11:32 AM

Hiya,
You can use either of them.
The update_us_person would inturn use the update_person procedure, it is just that there would be some extra validations in update_us_person procedure.
If you're working for a US legislation, then I would recommend update_us_person
Cheers,
VB

Similar Messages

Extending the End Date of Relationship Org. Unit and Position

Hi All,
Please help me below.
Problem: The end date for the relationship between org. unit and position should be set back to 31.12.9999. It was accidentally been set to 31.03.9999 and results to two records in infotype 0001, which the wrong record should be deleted.
This can only be deleted by changing the relationship end date in PO13 but unfortunately, the user doesn't have any access to this transaction.
Request: Can you explain to me on how the end date can be change in transaction PPOME or PPOM_OLD as these are the only transactions the user has an access. I'd already explored these transactions but I can't find on how it should be deleted here.
Thanks!

Hi Raju,
Thanks for this information. This was a very helpful answer. But I only need to extend the end date of a particular infotype 0001 record of a particular employee. I think the report will extend all of the records of all the employees in the system. I can't find any parameter in the report wherein I can set the employee number I wish to extend the end date.
Thanks!

Manager extending user End Date

I am trying to create a new form in OIM for internal purpose so that a user who is a Manager for other users can go in and change user's end date. He should be able to see only users who he is a Manager of. So I cannot give him access to Users Manage page.
Is there any existing OIM functionality that I can use for this purpose. Like creating an automated request so that manager can approve it to extend the Date.
Also If I create a new form for this purpose and use OIM API to update, should I do anything else other than creating jsp and Actions?

Could be 2 possible solutions:
- Organization Hierarchy : If you don't have any existing organizations defined then you can use this approach but it would end up in a state where OIM would have huge number of organizations but this would allow you to assign menu item and then only direct reports would be visible to the manager. Could be unmanageable in future.
- Custom Object/Process Form : Create an object form and have a couple of fields ('User Login' and 'Extended End-Date' where 'User Login' being a lookup type field. Now have dependent look-up defined so that it would only return the direct reports for the logged in user. Select a user and a new end-date, later in *process definition' update the user/contractor with the selected end-date.

Change employee End date validity Period

Hi all,
User is entered Validity Period wrongly.
Ex:- Entered as 08.01.2010 Instead of leaving dates as 31.12.9999
How can we change this..

Hey Greta,
I executed the report but it says ,"The deletion could not be carried out, plan records still exict on cost center for activity type." I have deleted every thing from kp26 for that particular combination of activity type and Cost center.
Any ideas as to what is happening!!
Regards,

Extend End date after the end date has reached

Hi gurus,
    We are using SRM5.0 on ECS with backend ECC5.0.
    We notice that after the end date of bid has reached even though there is a bid submitted by supplier , the purchaser still can extend the end date to a later date as long as he has not made the accept or reject choice.
    If it is the case, the purchaser can view the price after the end date reached and then extend the end date and maybe tell other supplier what the price the opponent has submitted. This is not allowed and should be penaltied.
    We just want to know how to avoid this in the term of system. Can we make the
end date field unchangeable after the end date has reached? or any other solutions?
Thank you in advance.
Message was edited by:
        YE Wang

Hi,
As Teja and SAndeep mentioned,you can go for either the Approval or BADI approach.
In case you are implementing the BADI,you can make the concerned fields grayed out so no changes are made but then this would mean that <b>no changes
</b> can be done at all after the END date has been reached.
In case of workflow,you can have you starting conditions in which you will compare the end date and the system date .If same,you can trigger a Workflow for approval of any changes to be done further.So even if the changes are made,the chnages are approved by a higher authority.
Another way would be to implement the "BBP_DOC_CHECK_BADI" to check whether the end date has been reached and then allow the user to do any changes.You can use the FM "BBP_PD_BID_GETDETAIL" to get the details of the BI and then check.In this case,you can additionally check for other parameters of the User like role,authorisation based on which he can make changes in exceptional cases.
BR,
Disha.
<b>Pls reward points for useful answers.</b>

OIM 11g Modify User Profile for Updating End Date

Hi Gurus!
We have an OIM implementation where users may request the creation of other users by means of a Create User request template. In this template we set the End Date to be 3 months after the request date.
In order for the requester to extend the period of a user's OIM user account (along with its provisioned resources) we customized a Modify User Profile by displaying the End Date field and automatically populate it again to 3 months after the request date. Also we developed a custom event handler to enable the user when it is disabled and the End Date is updated to a future date.
This Modify User Profile is working great when the user is still enabled (the End Date is still in the future), however, when the End Date has passed (and the user is Disabled) the requester is not able to see the user when selecting the Modify User Profile request template.
Is there a way to allow requesters to also see disabled users in the Modify User Profile request template?
Thank you in advance.
Regards,

Hi Kevin,
thanks for your reply!
But, in this case, when the user is already disabled due to his End Date, how can a requester, through the Self Service TAB, enable it?
The Enable User request template does not work since when trying to enable the user, OIM sees the End Date is already passed and the DataSet validation throws an exception.
The only way I saw was providing a Modify User Profile Request template to change the End Date and developing a custom event handler to enable the user upon the extension of the End Date...
How can, in this situation, a requester enable the user and extend its End Date?
Thank you!
Regards,

SQL 2012 Express end date of distribution

For SQL Server Express 2012 is there an end date for when a customer is no longer allowed to distribute it?
If so, what is that date? And where can we find it posted on a MS web page?
Does the customer need to register for SQL 2012 Express to get the redistribution rights as well?
Thanks

Hi Nikki,
As is mentioned in the article
Microsoft Support Lifecycle, SQL Server 2012 Express is supported until 2017, and the extended support end date of SQL Server 2012 Express is 12/07/2022.
However, SQL Server Express exists as a free SQL Server edition, fully compatible with and easily upgradeable to higher SQL Server editions. You can download SQL Server 2012 Express directly from below link and install it on your computer.
http://www.microsoft.com/en-us/download/details.aspx?id=29062
Thanks,
Lydia Zhang

Updating service contract line item's end date

Hi,
I am trying to extend the end date on a line item in a service contract via the DI and it is giving me the following error: 'Item's end date cannot be greater than contract's end date' and I don't understand why.
I retrieve the service contract object, change the header end date then find the line item I need, update it with the same end date and then issue call the SC update method. Here's my code:
    Try
             SC.Lines.SetCurrentLine(SerialNbrLineNumber)
             NewStartDate = LineEndDate
             'calculate new end date & extend service contract
             NewEndDate = NewStartDate.AddYears(Warranty_Duration)
            'never make the contract end date earlier than it had been
            SC.EndDate = IIf(NewEndDate > SC.EndDate, _
                                                         NewEndDate, _
                                                         SC.EndDate)
            'update service contract detail with new end date
             If NewEndDate > LineEndDate Then
                 SC.Lines.EndDate = NewEndDate
             End If
             If SC.Update() <> 0 Then
                rs.RtnCode = -1
                rs.RtnMessage = B1Comp.GetLastErrorDescription()
             End If
I did see something in the di help that mentions that B1 calcs an end date based on the "duration of coverage" field but I don't think I could use that because I might only change the end date for one line item.
BTW I can do this in the application with no problem.
Thanks in advance for any assistance.

Known B1 bug. Should have checked support first. More info on note # 1026540

Urgent ! Exit code to calculate End Date (31/12/9999) to Current system Dat

Dear All,
I have a scenario where i need to calculate Position time hold by an employee in an organisation.
I have 2 date Char ( DATE FROM & DATE TO), the problem is that is , If an employee is having
2/3 position in an organisation its current position End Date is always 31.12.999 as its End date is
not know. For previous position End Date is maintained.
My requirement is to calculate Position hold time including Current position.
I have created 2 Formula Variable on Date From & Date To,
The issue is that Date To is having both Values Previous Position Date thats ok as its not 31/12/9999
I am geting those values in Forumla in addition its also having Date For Current position as 31/12/9999
which should be converdet in to current system date.
I need to write a User Exit on End Date Forumla Variable which should only convert if Date = 31/12/9999
else leave it as it.
For EX,
EndDate
1/1/2005
1/1/2006
31/12/9999(Only this value need to convert as current system date and leave above valuse as it)
Can any one please provide me the code for this, this is v urgent.
Thanks V V much.
Regards,

Hi Dilek,
I now understand what you were writing.
I played around a bit and it still doesn't work like I want to.
The really strange thing is when I adapt an existing (SAP - standard) dynamic action (for another IT) the 'calculation part' is performed and with my own attempt it doesn't substract the day.
0442              BEGDA     06     10     P     T001P-MOLGA='05'
0442              BEGDA     06     20     I     MOD,0014,1539
0442              BEGDA     06     30     W     P0014-ENDDA=P0442-BEGDA
0442              BEGDA     06     50     W     P0014-VTROP='-'
0442              BEGDA     06     55     W     P0014-VTRAN='1'
0442              BEGDA     06     60     W     P0014-VTRZH='010'
If IT0442 is created or changed, IT0014 with subtype/wagetype 1539 should be delimited with enddate = (startdate IT0442 -/- 1 day)
If you can have a look whether I mak e an obvious mistake, it's appreciated.
In the meantime I'll fiddle around as well at my end.....
Thanks,
Wilfred.

Change infotypes end date when delete leaving action for employee

Hello,
I created new infotype and when employee leaves its end date is changed for leaving date.
When leaving action is deleted ther is some least of infotypes that user can sign so the end date of selected infotypes will be changed to 31.12.9999. How can i add my infotipe to this list?
Thank you,
Paulina

Hi,
Maintain IT 0041 where in that table maintain employee start date of hiring and leaving date of employee bze in IT 0000 the dates will change as per action lets say if employee hire that date will be in IT 0000 action and if employee gets promotion date or leaving date that will store in IT 0000 by delimiting other actions
So maintain IT 0041 where you can pull dates from there if you maintain
End date will always be 31.12.9999 so check action start date you will get in sequence
Thanks
Edited by: Vibinsap on Mar 9, 2012 7:12 AM

Payables Employee Listing Report Doesn't Reflect End-Date

We are running apps 11.0.3 on HP-UX 11, 8.0.5 database. When we run the Employee Listing in AP, the employees we have end-dated continue to show up when we run the report for only 'Active' employees. We don't have HR installed, so I don't know where else to end-date the employees (other than the employees screens in AP) so they won't show up on this report.
Any ideas?

In the "Enter Employees" screen within Payables, current practice is to end-date an employee when they are terminated in the Employment Dates field (there is a from and to field; the from is populated with the sysdate as employees are added). If you click "More" and go to the Person Information form, you can also From-To date the address detail. I tried end-dating this, but it didn't show up on the report either.
As mentioned before, we don't have HR installed (maybe a partial but there was no activity there) so Payables is the only place we maintain employees.

Infotype for Employee begin date and end date

Hi Friends,
Could any one tell me the infotype and fields for getting employee joining date and end date.
Regards,
Susmita.

Infotype 41 (Date Specifications) should have all dates.
Infotype 2...i.e. PA0002 BEGDA & ENDDA may not have actual start and end date depending on how your company maintains it.
In Infotype 41 (table PA0041)...get either BEGDA & ENDDA or get correct date based on qualifier DAR01-DAR12.
Thanks,
Pushpinder Randhawa

Employee qualification assignment IT0024 validity end date update

I Would like to change the validity end date value on one specific qualification assigned to an employee.
I can't do it using PA30. Is there anybody able to tell me how can I do it?
Thank you

You can't change endda because infotype 2 endda has to be '31129999'.
It's explicit here in this validation in module POST_INPUT_CHECK.
form check_it0002.   "form aus mppers00 hierher verlegt    "VLDN212840_2
if psyst-first eq yes and cprel-endda lt high_date.
*   I105(RP): Gültigkeitsende muß gleich & sein
    p0002-endda = high_date.                               "VLDN212840_2
    cprel-endda = high_date.                               "VLDN212840_2
    message e105(rp) with high_date.
endif.
if psyst-ioper eq modify.
    if cprel-endda lt high_date and pskey-endda eq high_date.
      p0002-endda = high_date.                             "VLDN212840_2
      cprel-endda = high_date.                             "VLDN212840_2
      message e105(rp) with high_date.
    endif.
endif.
endform.                    " check_it0002
high_date is a constant with value '99991231'.
Anyway, why would you want to change the endda on infotype 2 ?

How to reverse the end date on Oracle Standard Benefits plan for a employee

Hi,
We tried to end date a medical benefit plan for an employee but did it wrong. It should show end dated 31-JAN-2010 and then we wanted to add a new plan starting from '01-FEB-2010'. But we wrongly end-dated as on 31-DEC-2010.
Can anyone help me to identifiy how to remove the wrong end date from the benefit plan for the employee..
Regards
Arun Kumar S Rathod

If you are using life events, just backout the life event and the end-date will go away. then create a fresh life event and make necessary changes.

Urgent-change the end date for a existing wage type.

Hi,
Can u pls let us know how to change the end date for a existing wage type.
The current end date is 30.8.2008 and we would like to change to 31.12.9999.
Rgds,

Use This report RPCLGV00
The Wage Type Distribution report enables you to display wage types for several payroll periods. It does not take into consideration differences resulting from retroactive payroll. The report shows the current values (number and amount) for each wage type. The report evaluates the payroll records that are marked with update indicator A when the report is run. Subsequent reporting runs may not give the same result if - in the intervening period - retroactive payroll has taken place for the evaluation period. The wage type distribution uses the data from the results table RT for the relevant payroll result. The employees organizational assignment is also evaluated from the payroll result. This data is taken from the Work Center Basic Pay table (WPBP).
The wage type distribution offers you the following options for evaluation:
Individual reporting for a specific personnel number or name.
Totals evaluation without specifying a personnel number or name.
You cannot use wage type distribution to run a report for several countries. You can only select payroll areas from one country for reporting.
Scope of Function
You use the following parameters to determine how the appearance of the wage type statement:
Wage type for evaluation
Enter all wage types that are to be evaluated. If you do not make an entry here, the system selects all wage types. Note that you can only select wage types that occur in the RT table.
Evaluation start date
Evaluation start date and evaluation end date define the evaluation period. Enter the year and payroll period for the start of the evaluation.
Evaluation end date
This parameter delimits the evaluation period. If you do not make an entry here, only the period from the period from the parameter Evaluation start date is evaluated.

Extending Employee End Date...urgent!!

Similar Messages

Maybe you are looking for