F4 help in the selection screen from a int table

I collected the datas from the function module. and the internal table is populated.
the internal table contains manny fields.
among these fields i need to take only one field and this field value to be used for F4 help in the selection screen ( not a dynpro)
for example : in the selection screen
I have to select the PO.
based on the user i have filtered the PO. (determined dynamically by using the user name this i have done it)
then i have to assign the PO the selection screen.
which FM will be better to use for this type of scenario and help me out with some example codes particularly for my req
Thanks

Hi ,
use the FM 'F4IF_INT_TABLE_VALUE_REQUEST'
This example is for search help for material type .
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_mtart-low .
select all material types you want to display in search help into table i_mtart.
PERFORM select_material_type.
PERFORM help_material_type.
*& Form help_material_type
text
--> p1 text
<-- p2 text
FORM help_material_type .
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
DDIC_STRUCTURE = ' '
retfield = 'MTART'
PVALKEY = ' '
dynpprog = sy-cprog
dynpnr = sy-dynnr
dynprofield = 'S_MTART-LOW'
STEPL = 0
WINDOW_TITLE =
VALUE = ' '
value_org = 'S'
MULTIPLE_CHOICE = ' '
DISPLAY = ' '
CALLBACK_PROGRAM = ' '
CALLBACK_FORM = ' '
MARK_TAB =
IMPORTING
USER_RESET =
TABLES
value_tab = i_mtart
FIELD_TAB =
RETURN_TAB =
DYNPFLD_MAPPING =
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3
IF sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " help_material_type
Regards,
Balaji.

Similar Messages

How to limit the search help in the selection screen?

Hi All,
I got a selection option in a selection screen,
say SELECT-OPTIONS KSCHL FOR VAKE-KSCHL.
I want to limit the output list of the search help of this field, e.g. 33 entries for a specific application and usage.
What should I do ?
Thz.

Hi,
U can check with these two
... NO-EXTENSION
Effect
The user can only make an entry on one line. Calling the additional "Multiple Selection" screen is not supported and no pushbutton for this appears on the selection screen.
Addition 12
... NO INTERVALS
Effect
The selection option is displayed on the selection screen without a 'to' field. The pushbutton for calling the "Multiple Selection" screen appears immediately after the 'from' field.
This addition thus allows you to generate a simplified display on the selection screen. This is particularly useful if you are not making any range selections for this selection option.
Notes
On the "Multiple Selection" screen, you can also enter ranges for selection options with "NO INTERVALS".
By combining this addition with "NO-EXTENSION", you can restrict the user to entry of a single value for the selection option, but with the possibility of also choosing single value options like 'Greater than' or 'Less than or equal'.
By using the addition " NO INTERVALS" with SELECTION-SCREEN BEGIN OF BLOCK, you can activate the simplified display for all selection options in a block.
The function module SELECT_OPTIONS_RESTRICT allows you to restrict the set of selection options available for a SELECT-OPTION (for example, only single values and patterns, i.e. 'EQ' and 'CP' are allowed). You can also forbid the leading sign 'E' (= 'Exclude from selection'). This means that you can considerably restrict the selections which can be entered on the selection screen.
Just now tried it out to limit the search help u have to use NO-EXTENSION.
Try this simple code.
Tables: mara.
SELECT-OPTIONS: s_matnr FOR MARA-matnr NO-EXTENSION.
Hope this helps.
Kindly reward points and close the thraed if ur problem got solved.
U havent rewarded any points?
Message was edited by: Judith Jessie Selvi

Help in the selection screen

hi folks,
I need help in updating the selection screen, I have declared the 'parameters' object in the selection screen like this.
parameters:
Paygroup type ZPGKIS obligatory.
it has three values '5A', '5B' and '5V'. when I select '5V' from the parameters, I need to display another parameters selection object for 'date' otherwise NO
I tried something like this.....
if Paygroup = '5V'.
parameters: p_date type d.
endif.
It is not working...
How can I correct this??
Thanks in advance
Vinu

hii
you can make that using radio button

REPORT z_selectionscreen .
SELECTION-SCREEN BEGIN OF BLOCK blk.
PARAMETERS : p_rb1 TYPE PAYGROUP RADIOBUTTON GROUP rad1 DEFAULT 'X' USER-COMMAND FC,
 p_rb2 TYPE PAYGROUP RADIOBUTTON GROUP rad1.
SELECTION-SCREEN END OF BLOCK blk.
SELECTION-SCREEN BEGIN OF BLOCK blk_1 WITH FRAME.
PARAMETERS : p_werks1 TYPE werks_d MODIF ID bk1.
SELECTION-SCREEN END OF BLOCK blk_1.
SELECTION-SCREEN BEGIN OF BLOCK blk_2 WITH FRAME.
PARAMETERS : p_werks2 TYPE werks_d MODIF ID bk2,
 p_matnr2 TYPE matnr MODIF ID bk2.
SELECTION-SCREEN END OF BLOCK blk_2.
AT SELECTION-SCREEN OUTPUT.
IF p_rb1 = '5V'.
 LOOP AT SCREEN.
 IF screen-group1 = 'BK1'.
 screen-active = 0.
 MODIFY SCREEN.
 ELSE.
 screen-active = 1.
 MODIFY SCREEN.
 ENDIF.
 ENDLOOP.
ELSE.
 LOOP AT SCREEN.
 IF screen-group1 = 'BK2'.
 screen-active = 0.
 MODIFY SCREEN.
 ELSE.
 screen-active = 1.
 MODIFY SCREEN.
 ENDIF.
 ENDLOOP.
ENDIF.
you can as well check this code
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS : P_FILE(25) TYPE C,
 O_FILE(25) TYPE C.
SELECTION-SCREEN END OF BLOCK B1.
*Selection Screen 2
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-002.
PARAMETERS: CAL_TRA RADIOBUTTON GROUP G1 USER-COMMAND FLAG,
 SESSION RADIOBUTTON GROUP G1 DEFAULT 'X'.
SELECTION-SCREEN END OF BLOCK B2.
*Selection Screen 3
SELECTION-SCREEN BEGIN OF BLOCK B3 WITH FRAME TITLE TEXT-003.
PARAMETERS: MODE DEFAULT 'X' MODIF ID BL1,
 UPDATE DEFAULT 'X' MODIF ID BL1.
SELECTION-SCREEN END OF BLOCK B3.
*Selection Screen 4
SELECTION-SCREEN BEGIN OF BLOCK B4 WITH FRAME TITLE TEXT-003.
PARAMETERS: SES_NAM TYPE APQI-GROUPID MODIF ID BL2,
 KEP_TRAS TYPE C DEFAULT 'X' MODIF ID BL2,
 LOC_DATE TYPE SY-DATUM MODIF ID BL2,
 USER TYPE SY-UNAME DEFAULT SY-UNAME MODIF ID BL2.
SELECTION-SCREEN END OF BLOCK B4.
 At Selection-Screen Output *
AT SELECTION-SCREEN OUTPUT.
IF CAL_TRA = 'X'.
 LOOP AT SCREEN.
 IF SCREEN-GROUP1 = 'BL1'.
 SCREEN-ACTIVE = '1'.
 ENDIF.
 IF SCREEN-GROUP1 = 'BL2'.
 SCREEN-ACTIVE = '0'.
 ENDIF.
 MODIFY SCREEN.
 ENDLOOP.
ENDIF.
IF SESSION = 'X'.
 LOOP AT SCREEN.
 IF SCREEN-GROUP1 = 'BL1'.
 SCREEN-ACTIVE = '0'.
 ENDIF.
 IF SCREEN-GROUP1 = 'BL2'.
 SCREEN-ACTIVE = '1'.
 ENDIF.
 MODIFY SCREEN.
 ENDLOOP.
ENDIF.
Message was edited by: Naresh Kumar
Message was edited by: Naresh Kumar

How to assign F1 help to the selection screen fields

Hi All,
I have a requirement.I have to create a button named "HELP" at the side of Execute button in the selection screen.If I place my cursor in the selection screen field and I press that "HELP" button, I should get the Documentation help for that field.
Please suggest me on this.
Thanks in advance.
Sreeharsha Singuru

Hi sreeharsha,
here a short example:
TABLES: MARA.
TABLES: SSCRFIELDS.
TYPE-POOLS: ICON.
DATA: CURSORFIELD(20).
SELECTION-SCREEN: BEGIN OF LINE.
SELECT-OPTIONS: S_MATNR FOR MARA-MATNR.
SELECTION-SCREEN: END   OF LINE.
SELECTION-SCREEN: BEGIN OF LINE.
SELECT-OPTIONS: S_MTART FOR MARA-MTART.
SELECTION-SCREEN: END   OF LINE.
SELECTION-SCREEN: SKIP 3.
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN: PUSHBUTTON (10) PB01 USER-COMMAND HELP.
SELECTION-SCREEN: END   OF LINE.
AT SELECTION-SCREEN.
GET CURSOR FIELD CURSORFIELD.
CASE SSCRFIELDS.
    WHEN 'HELP'.
      CASE CURSORFIELD.
        WHEN 'S_MATNR-LOW'.
          CALL FUNCTION 'POPUP_TO_DISPLAY_TEXT' "Make your own Text
            EXPORTING
              TITEL        = 'Information'
              TEXTLINE1    = 'Information for field:'
              TEXTLINE2    = 'S_MATNR-LOW'
              START_COLUMN = 10
              START_ROW    = 15.
        WHEN 'S_MTART-LOW'.
          CALL FUNCTION 'POPUP_TO_DISPLAY_TEXT' "Make your own Text
            EXPORTING
              TITEL        = 'Information'
              TEXTLINE1    = 'Information for field:'
              TEXTLINE2    = 'S_MTART-LOW'
              START_COLUMN = 10
              START_ROW    = 15.
      ENDCASE.
ENDCASE.
INITIALIZATION.
CONCATENATE ICON_INFORMATION 'Help' INTO PB01.
START-OF-SELECTION.
SELECT * FROM MARA WHERE MATNR IN S_MATNR.
    WRITE: / MARA-MATNR.
ENDSELECT.
Hope it helps.
Regards, Dieter

F4 Help for the selection screen field

Hi Gurus,
I have to display F4 help for a selection screen field. i am using following code:
    CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
         EXPORTING
              retfield        = 'CODE'
              dynpprog        = lw_repid
              dynpnr          = sy-dynnr
              VALUE_ORG       = 'S'
         TABLES
              value_tab       = gi_text
             field_tab       = li_fields_tab
              return_tab      = pi_return_tab
         EXCEPTIONS
              parameter_error = 1
              no_values_found = 2
              OTHERS          = 3.
My internal table gi_emp has two fields CODE & TEXT. When i select 1 particular value, it returns the CODE value in the pi_return_tab table.
But my requirement is i have to capture the corresponding TEXT value for the Returned CODE. Ex: following is the F4 help being displayed: -
001    test
001    test1
but is i select code 001(First Value), i also need to capture it's corresponding Text value. In return table pi_return_tab i have only Code value.
Please help me out.
Note: Based on return code i can't search into the internal table gi_code, because as shown in the example, code has multiple text.

Sachin,
I think this is what you need. The following code will return the key and the text (OR any other columns), if both columns are in the selection screen the selected values (both columns) will also be passed to the corresponding parameters. If you only need the text to be in the return table and not passed to the selection screen then set the parameter for text with NO-DISPLAY option.
REPORT zktest01 .
DATA :
BEGIN OF value_tab OCCURS 0,
    field LIKE e070-trkorr,
    text   LIKE e07t-as4text,
END OF value_tab.
DATA: t_fldtab LIKE dfies OCCURS 0 WITH HEADER LINE,
      t_rettab LIKE ddshretval OCCURS 0 WITH HEADER LINE,
      t_dynmap LIKE dselc OCCURS 0 WITH HEADER LINE.
PARAMETERS : p_field LIKE value_tab-field,
             p_text   LIKE value_tab-text. "NO-DISPLAY.
INITIALIZATION.
t_fldtab-tabname   = 'VALUE_TAB'.
t_fldtab-fieldname = 'FIELD'.
t_fldtab-langu     = 'E'.
t_fldtab-position = 1.
t_fldtab-offset    = 0.
t_fldtab-fieldtext = 'Key'.
t_fldtab-reptext   = 'Key'.
t_fldtab-leng      = 20.
t_fldtab-intlen    = 20.
t_fldtab-outputlen = 20.
t_fldtab-datatype = 'CHAR'.
t_fldtab-inttype   = 'C'.
t_fldtab-headlen   = 20.
t_fldtab-keyflag   = 'X'.
t_fldtab-lowercase = ' '.
APPEND t_fldtab.
t_fldtab-tabname   = 'VALUE_TAB'.
t_fldtab-fieldname = 'TEXT'.
t_fldtab-position = 2.
t_fldtab-offset    = 20.
t_fldtab-fieldtext = 'Text'.
t_fldtab-reptext   = 'Text'.
t_fldtab-leng      = 60.
t_fldtab-intlen    = 60.
t_fldtab-outputlen = 60.
t_fldtab-headlen   = 60.
t_fldtab-keyflag   = ' '.
t_fldtab-lowercase = ' '.
APPEND t_fldtab.
value_tab-field = '101'.
value_tab-text = 'dddd'.
APPEND value_tab.
value_tab-field = '202'.
value_tab-text = 'aaaa'.
APPEND value_tab.
t_dynmap-fldname = 'FIELD'.
t_dynmap-dyfldname = 'P_FIELD'.
APPEND t_dynmap.
t_dynmap-fldname = 'TEXT'.
t_dynmap-dyfldname = 'P_TEXT'.
APPEND t_dynmap.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_field.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
       EXPORTING
            retfield        = 'FIELD'
            dynpprog        = 'ZKTEST01'
            dynpnr          = '1000'
            dynprofield     = 'P_FIELD'
            value_org       = 'S'
       TABLES
            field_tab       = t_fldtab
            value_tab       = value_tab
            return_tab      = t_rettab
            dynpfld_mapping = t_dynmap
       EXCEPTIONS
            parameter_error = 1
            no_values_found = 2
            OTHERS          = 3.
IF sy-subrc EQ 0.
ENDIF.
START-OF-SELECTION.
Jeffrey Satriadi

Physical file path on the selection screen from AL11 Tcode

Hi All,
Please let me know some body how do we give only physical file path(only directory not the file names) on the selection screen?I need to see when I press F4 only the physical file directories of the application server.
Thanks in advance.
Mahesh

Hi,
This FM will be helpful.....
F4_dxfilename_toprecursion
CALL FUNCTION 'F4_DXFILENAME_TOPRECURSION'
* EXPORTING
* I_LOCATION_FLAG = ' '
* I_SERVER = '?'
* I_PATH =
* FILEMASK = '*.*'
* FILEOPERATION = 'R'
* IMPORTING
* O_LOCATION_FLAG =
* O_SERVER =
* O_PATH =
* ABEND_FLAG =
* EXCEPTIONS
* RFC_ERROR = 1
* ERROR_WITH_GUI = 2
* OTHERS = 3
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Regards,
Mdi.Deeba Najam.

F4 help for the selection screen field designed in screen painter

Hi all,
I have designed selection screen in the screen painter. in that for one of the fields i have to give f4 help. for that i have writter the code in PAI event. in this event i have used the standard Function module for f4 help. but no f4 help is comming for that field. can any body suggest what i have to do.
Thanks & Regards,
Giri.

Hi,
You must use the correct event to meet ur requirement use POV event instead of PAI event.
for more clarification and example program see below the demo program
DEMO_DYNPRO_F4_HELP_DYNPRO
DEMO_DYNPRO_F4_HELP_MODULE
Cheers
fareed

Help on the selection screen.....Select-options default values

Dear Friends,
We have one requirement,i.e. In Report program i am using select-option once will execute the program ALV report will be generated.In ALV Report we have one button like 'WM DATA'.Once click the WMDATA one pop-up is displaying...In that pop-up also same select-options are there upto here it's working fine...Now my problem is on pop-up select-options i have to display by default..... which i am using on report select-options values.
Please help on the same
Thank You.

Do like this. Before calling your next screen assign the select option value or just assign the value in start of selection only.
tables
:lqua.
SELECT-OPTIONS:
s_lgnum FOR lqua-lgnum MODIF ID sc1 OBLIGATORY,
s_lgtyp FOR lqua-lgtyp MODIF ID sc1.
SELECTION-SCREEN BEGIN OF SCREEN 300 .
SELECT-OPTIONS : s_lgnum1 FOR lqua-lgnum OBLIGATORY,
s_lgtyp1 FOR lqua-lgtyp OBLIGATORY.
SELECTION-SCREEN END OF SCREEN 300.
START-OF-SELECTION.
s_lgnum1[] = s_lgnum[].
s_lgtyp1[] = s_lgtyp[].
call SELECTION-SCREEN 300.

Reg: F4 help on the selection screen

Hi,
My requirement is that I want to get the set of values which i want on the f4 help of the field. But not the default search help which comes.
Similar to getting f4 help in ABAP by using the function module F4IF_INT_TABLE_VALUE_REQUEST'.
please help me in the regard.
Thanks,
Khan.

You will need to use either OVS or Freely Programmed Help

How to get the F4 help for a field in the selection screen

Hi all,
I am working on a report program. In the selection screen, I have the field 'Brand Node ID'(ZNODEID). The requirement is to have the F4 help for this field. This field is available in a 'Z' table ZNODETAB. There is no Value table maintained for the corresponding data element. So, without disturbing the table data element/domain, I should get the F4 help in the selection screen of the report. In the F4 help, data should be fetched from the table ZNODETAB and the field is ZNODEID. Is there any way to do this.
By searching the function modules, I could find that, we can use the FM F4IF_INT_TABLE_VALUE_REQUEST. But, I am not Sure. Can someone tell me the parameters to be passed to this function module to get the F4 help and the procedure to follow. S_NODEID is the select option used in the program. Please help me in this regard. Thanks in advance.
Thanks & Regards,
Paddu.

look at this code and try
select-options : S_NODEID for ZNODETAB-ZNODEID.
at selection-screen on value-request for s_nodeid-low
perform f4_nodeid using 'S_NODEID-LOW'.
at selection-screen on value-request for s_nodeid-low
perform f4_nodeid using 'S_NODEID-HIGH'.
end-of-selection.
FORM f4_nodeid USING    p_field.
declare it_node.
select znodeid from ZNODETAB into table it_node.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield        = 'ZNODEID'
      dynpprog        = sy-repid
      dynpnr          = sy-dynnr
      dynprofield     = p_field
      value           = space
      value_org       = 'S'
      display         = 'F'
    TABLES
      value_tab       = it_node
    EXCEPTIONS
      parameter_error = 1
      no_values_found = 2
      OTHERS          = 3.
endform

Reg: calling selection screen from the second list

Hi all,
How can we call the selection screen from the second screen.
Can any one help me to solve this problem.

HI RJ,
Try .....
case sy-ucomm.
WHEN '&F03'.
LEAVE TO SCREEN '0'.
endcase.
after the FM for grid-display
i m using the same .....
i hav selection-screen..then alv grid screen 1 then again another screen with alv grid display..
bt in my code for first alv grid ...i m using REUSE_ALV_GRID_DISPLAY_LVC
as
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY_LVC'
      EXPORTING
        i_callback_program       = sy-repid
        i_callback_pf_status_set = 'SET_PF_STATUS'(303)
        i_callback_user_command = 'USER_COMMAND'(304)
        i_grid_title             = 'Reconcilation Report'(305)
        is_layout_lvc            = it_layout
        it_fieldcat_lvc          = gt_fieldcat3[]
      TABLES
        t_outtab                 = gt_msg[].
here i musing set_pf_status to add one pushbutton to the screen. in ur case u can avoid that...
after that
*&      Form set_pf_status
      text
     -->EXTAB      text
FORM set_pf_status USING extab TYPE slis_t_extab.           "#EC NEEDED
SET PF-STATUS 'STANDARD_FULLSCREEN'.
*get back to Selection Screen
case sy-ucomm.
    WHEN '&F03'(328).
      LEAVE TO SCREEN '0'.
endcase.
ENDFORM.                    "set_pf_status
its working for me..
Thnx
Rohit...
Edited by: Rohit Kumar on Oct 29, 2008 3:20 PM

How to Modify the Selection Screen in Report Painter

Hi All,
I am working on Report painter and writer,
can any body helpme how to change the selection screen i.e i want add some more select options to the exisiting roport .
how can i add more select options to the exisiting one
please let me know the Procedure and provide some relevent documents .
Thanks and Best regards.
uma

Hello...
In the program ...we can find the following chunk of code..
selection-screen:begin of block B1 with frame title text-001.
Parameters : ....
select-options:.....
selection-screen:end of block b1.
if we need to add any more user inputs we can write the code inside the existing
selection screen....end of block .
or create a new block ..just the block name should be different...
if we are using select options...we need to declare the table name using the key word for the field on which we are giving select options ....
Tables : BSIK.
Please see the following code:
Imagine :- we have the current selection screen..
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS: P_BUKRS LIKE BSIK-BUKRS DEFAULT SPACE.
SELECT-OPTIONS: S_LIFNR FOR BSIK-LIFNR.
SELECTION-SCREEN END OF BLOCK B1.
we need to add 2 more fields on the selection screen ..this we can do as the following
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS: P_BUKRS LIKE BSIK-BUKRS DEFAULT SPACE.
SELECT-OPTIONS: S_LIFNR FOR BSIK-LIFNR,
                S_HKONT FOR BSIK-HKONT.
PARAMETER: P_DATE LIKE BSIK-BUDAT OBLIGATORY DEFAULT
           SY-DATUM.
SELECTION-SCREEN END OF BLOCK B1.
OR...create a new block...
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-002.
SELECT-OPTIONS:   S_HKONT FOR BSIK-HKONT.
PARAMETER: P_DATE LIKE RFPDO-ALLGSTID OBLIGATORY DEFAULT
           SY-DATUM.
SELECTION-SCREEN END OF BLOCK B2.
there are many options available in selection screens..like creating check box,radio button etc..
for more info press F1 help on the Selection screen in the ABAP editor
Revert back if not clear and reward if helpful
Regards
Byju

How to get back to Selection Screen from Drill Down Screen in ALV

Hi All
How can I come back directly to the Selection Screen from the drill down screen of an ALV Report i.e. in an Interactive ALV Report when sy-lsind > 1.
Thanks
Kulpreet

Try to use ....
SET SCREEN 0.
LEAVE SCREEN.
Regards,
Rich Heilman

Input help required for parameter on the selection screen

hi all,
i have created two parameters on the selection screen.
1. deptno
2.empname
so my requirement is if i input any deptno then i should get all
the empname corresponding to that deptno in the parameter empname
ie for deptno 10 there should be f4 help for empname.
here i am pasting my code plz check where i am doing wrong--
*& Report ZTEST10
*& Developer
*& Date: &DATE
REPORT ZTEST10.
tables: zemployee1.
parameters: p_deptno like zemployee1-deptno,
 p_empnam like zemployee1-empname.
Data: begin of itab occurs 0,
 deptno like zemployee1-deptno,
 empname like zemployee1-empname,
 empno like zemployee1-empno,
 end of itab.
At selection-screen on value-request for p_empnam.
select empname
 from zemployee1
 into corresponding fields of table itab
 where deptno = p_deptno.
 CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
 EXPORTING
 DDIC_STRUCTURE = ' '
 retfield = 'empname'
 PVALKEY = ' '
 DYNPPROG = sy-repid
 DYNPNR = sy-dynnr
 DYNPROFIELD = 'p_empnam'
 STEPL = 0
 WINDOW_TITLE =
 VALUE = ' '
 VALUE_ORG = 'C'
 MULTIPLE_CHOICE = ' '
 DISPLAY = ' '
 CALLBACK_PROGRAM = ' '
 CALLBACK_FORM = ' '
 MARK_TAB =
 IMPORTING
 USER_RESET =
 tables
 value_tab = itab
 FIELD_TAB =
 RETURN_TAB =
 DYNPFLD_MAPPING =
 EXCEPTIONS
 PARAMETER_ERROR = 1
 NO_VALUES_FOUND = 2
 OTHERS = 3
 IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
I will award ur efforts.
Thanks
sanjeev

Hi Sanjeev,
If you input any deptno and you should get all the empname corresponding then first you need to use CALL FUNCTION 'DYNP_VALUES_READ'.
EXPORTING
 DYNAME = sy-repid
 DYNUMB = sy-dynnr
TRANSLATE_TO_UPPER = ' '
 REQUEST = 'A'
PERFORM_CONVERSION_EXITS = ' '
PERFORM_INPUT_CONVERSION = ' '
DETERMINE_LOOP_INDEX = ' '
TABLES
 DYNPFIELDS = gt_dynp
declare: DATA : gt_dynp LIKE dynpread OCCURS 0.
loop at gt_dynp into wt_dynp where fieldname = 'P_SUPRID-LOW'.
lv_low = wt_dynp-fieldvalue.
endloop.
Then while selecting use this p_superid-low instead of p_deptno.
Then :
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
After this funtion module:
write:
IF sy-subrc = 0.
 READ TABLE itab
INDEX 1.
 'p_empnam' = return_tab-fieldval.
Declare return_tab as:
 DATA: return_tab LIKE ddshretval OCCURS 0 WITH HEADER LINE.
Thanks,
Shweta
ENDIF.

Choosing a directory from the selection-screen

Hi,
regarding: select-options
There is a function module to choose a file (on value request F4) from the harddisc =>KD_GET_FILENAME_ON_F4
I want the user to choose his path(folder) from the selection screen.
Is there any function module to choose only the directory(path) not the file?
Thanks and Regards.

Hi Ashok,
You can alternatively do the following. Call the method of class CL_GUI_FRONTEND_SERVICES as follows.
Call Method CL_GUI_FRONTEND_SERVICES-->DIRECTORY_BROWSE
 Exporting
 WINDOW_TITLE =
 INITIAL_FOLDER =
 SELECTED_FOLDER =
Hope this helps.
Please reward some points if it helps you.
Regards,
Amit M. Mishra

F4 help in the selection screen from a int table

Similar Messages

Maybe you are looking for