Facebook video calling won't work after upgrading

i have tried diffrent browsers . still no solution . i see myself instead of the other person ..

No can do, David. I have a board that supports quad SLI. Windows 8.1 x64 recognizes two cards just fine. But when a third, is added, or two more at once, I mean, there is -nothing-, absolutely nothing in the device manager to suggest that
any device is added, period. Not that it matters, but the cards are two RADEON 290x s, a radeon 7590, and a radeon 5850. These all work fine on other systems, and actually, other windows 8.1 installs. All updates added, all chipset drivers
added, and all these cards work off of the newest catalyst drivers, 13.12, which supersedes any beta 13.11 version. Does not matter out of the myriad of ways the cards are entered, which order, how many, etc. Over two? "it" will choose the
one or two it seems, and absolutey nothing will come up in device manager, even under "view by connections." It's as if the x16 slots housing the added cards, or cards 4 or more if tried at once, are seen as vacant.
If I could get windows to recognize a -device- is added in a proper x16 slot, properly configured, that, I might be able to work with. I must have completely uninstalled catalyst versions and installed
them over 100 times in testing. It doesn't matter. Catalyst cannot shift over drivers to a card or cards that windows itlelf doesn't "see." I've tried a huge number of different things, but short of not scaling up with windows 8.1, nothing
seems to be working. Windows 7 x64 seems to not be the genesis of "missing card" trouble in that op system. That, is wonky catalyst. But windows 8.1 has yet even given catalyst a chance to mess things up, and sometimes "forget" cards on reboot.

Similar Messages

ICloud email won't work after upgrade

iCloud email won't work after upgrade to Mountain Lion. Says pop 3 server is timing out. Solutions?

I'm sorry, as I keep saying... in MAIL I get the message that it cannot cannot to server!? Did you read the initial problem at all! I know exactly where mail is, although, the diagram was wonderful.
My problem is TWO FOLD.
The MAIL app doesn't work with iCloud but does work with my POP3 email for my office.
Second problem is the iCloud on Safari doesn't work as I get the error message as the screenshot above.
There is NO reason why the @me.com email shouldn't work through the iCloud site, as you can see, there is a also a Mail icon.

Mail won't work after upgrade to 3.0

I cannot get my Mail program to work after upgrading to 3.0. It starts, searched for new mail, then quits. I cannot get or send new mail. The program does not operate. Suggestions, please?

I get the exact same thing. The status just keeps showing "Connecting..." and it never seems to connect. Oddly enough, I just updated to the new OS on my iMac at home and immediately after, I couldn't connect to mail from the computer. I had to manually download a component of the update and once I did that, mail worked just fine. Probably just an odd coincidence having nothing to do with the mail issues on the iPhone but I thought I'd mention it.

Itunes won't work after upgrading to Mac os x 10.7

How can i fix itunes, it won't open after upgrading to Mac OX lion??

Downloaded and reinstalled. Still crashed instantly after trying to open or create a document. Below, from Crash Report:
Exception Type: EXCBADACCESS (SIGBUS)
Exception Codes: KERNPROTECTIONFAILURE at 0x0000000000000044
Crashed Thread: 7
Thread 7 crashed with X86 Thread State (32-bit):
eax: 0xb0427d48 ebx: 0xb0427c38 ecx: 0xb0427b38 edx: 0xb0427b3c
edi: 0x00000009 esi: 0x00000000 ebp: 0xb0427b18 esp: 0xb0427ae0
ss: 0x0000001f efl: 0x00010283 eip: 0x94bc9f4b cs: 0x00000017
ds: 0x0000001f es: 0x0000001f fs: 0x0000001f gs: 0x00000037
cr2: 0x00000044
Will attempt your suggestion.

HT204350 scanner won't work after upgrade

scanner won't work after upgrade

Hey srohall,
Thanks for the question. I understand that you are experiencing issues with your scanner after updating to OS X Mavericks. To troubleshoot this issue, we’ll want to follow the same troubleshooting steps for printers:
Troubleshooting printer issues in OS X
http://support.apple.com/kb/ts3147
Follow these steps until the issue is addressed:
1. Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
2. Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
3. Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
4. Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
5. Delete the affected printer, then add the printer again.
If the issue persists, try these additional steps:
1. Reset the printing system, then add the printer again.
2. If the issue still persists, reset the printing system again. Download and install your printer's drivers. Then, add the printer again.
3. Contact the printer vendor or visit their website for further assistance.
Thanks,
Matt M.

My itunes store, app center, safari and mail won't work after upgrade

I am very dissapointed in the new maverick upgrade. My app center, itune store, safari, and me mail won't work with the new upgrade. I called the help desk and they had me uninstall and re install the upgrade. he said i should have everything backed up cuz I will lose everything, but nothing was lost. It worked for a day, but now it doesn't work at all. it just gives me the hourglass circle symbol and finally times out. A couple of times my computer gave me an error code that i wasn't connected to the internet, even though I could use chrome no problem. Another error code I got was that I wasn't signed in, but I am. Any suggestions?

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

G4 AGP Graphics - 2nd display won't work after upgrading from os 10.2

I have a desktop G4 AGP Graphics with two displays. When I was running os 9-10.2, the second display worked fine, but after upgrading the os (now running 10.4), the second display still works, but has turned gray and pixelated.
When I take a screen shot, the picture shows that both displays appear clear (and in color).
Am I missing something? Thanks in advance for any suggestions

so do you have 2 different video cards driving two different monitors? or is it One video card with 2 displays?
the info you listed isnt very detailed but it does tell me you got an ATI video card with 16MB VRAM.
I assume that thats the Stock AGP 2x graphics card that came the The PowerMac G4 AGP graphics model.
why is your display set to 8bit depth? a stock 2x AGP card with 16MB VRAM should be able to support 16bit or 24bit depth even at 1024 x 768 res.
the info says also Core image not support as well as Quartz Extreme no supported. Which is significant because it could be why the 2nd Monitor doesnt display properly with Tiger.
under 10.2 there were less stringent requirements for driving video.
OSX 10.4 Tiger is much more advanced OS and has higher graphics cards requirements now.
I could be wrong, but I think you may need a newer video card that supports Quartz Extreme and Core image.
hopefully someone else will run by this topic and offer some insight aside from my own.

Skype video call won't work

Hi every body, I've had a mac book air 2012 for almost a year now and have been using Skype avidly however recently after the Maverick update Skype does not work so well. When I try and do a video call I will be able to see the person at the other end but it will just say that my video picture is loading and the little green camera light wont come on. Any suggestions?

https://discussions.apple.com/message/23627865#23627865

Sd connector won't work after upgrading to ios8.1

after upgrading to iOS 8.1 my official lightening SD connector won't work, when I plug it in it says " cannot use device sub storage: the connected device is not supported"'is anyone else having this problem if so how to fix it, my sd connector worked fine when I was on ios7.

Same here, I have an iPhone 5s and it is really frustrating, all news app, twitter, whatsapp have stopped to Push any notification unless my device is awake !! only emails are fine - once I awake the iPhone, dozens of notifications pops up which make it really hard and annoying to read and follow !!!!
Please advise!!
Noting that i have tried to reset settings, backup and restore, install all updates....etc nothing worked !!

HP C7280 Solution Center won't work after upgrading to Windows 7

I was running Vista and connected to the C7280 both wired and wireless. Last month or so has been wireless with no issues.
I upgraded to Windows 7, reinstalled the driver I had, and now when I try to scan I get an error that says "An unsupported operation was attempted" that pops up twice, then I get an error that says "An invalid argument was encountered".
Then a pop up window gives some steps to try to fix the problem.
I downloaded and installed driver PS_AIO_02_Net_Full_Win_WW_130_140.exe which didn't work.
I then removed the printer from hardware, and uninstalled the Solution Center software,
Re-installed driver PS_AIO_02_Net_Full_Win_WW_130_140.exe C7200 driver package and
installed dot4patch_reboot.exe,
shut the printer down, unplugged it for a few minutes, rebooted the computer, and
the same errors occur.
The driver is a year old, and I can't find a newer version.
Released:
2009-10-20
Version:
13.1.0
The patch is a few months newer but it didnt help either.
» HP Print Software Patch When Upgrading Vista to Windows 7
2009-12-06 , Version:1.0, 1.22M
This Windows 7 patch fixes some printer functionality after upgrading Vista to Windows 7. For networked printers, please go to www.hp.com for more support information.
Any help is appreciated.
This question was solved.
View Solution.

Finally got this problem fixed. No Thanks to HP Support
I installed the software for an HP Photosmart Premium C410 series and it corrected whatever problems I had with the HP Solution Center scanning problems in the C7280 printer software.
Go Figure ......

Facebook video call don't work ?

hi i just download apple os marvericks , and i find problem with video call in facebook , somebody can help me please to restart my video call en facebook

You made need all to restore your phone. I had this issue when 6.1 appeared, and I coudn't bring it until I made a full and clean restore.
For user "11142007"
Maybe it's something that you sincronyze, a glitch, or if you restore from a backup, don't do that anymore, you need a clean install, and afterwards sync the data, don't restore it.
Keep me posted and if my answer helped you please add.

Epson stylus cx 3800 won't work after upgrade to osx 10.9

I installed OS X 10.9 on my MacBook Pro and now my printer Epson Stylus CX 3800 won't work. I uninstalled the printer and tried to reinstall with original epson software but computer won't download it. Perfectly good printer worked yesterday but not today. Any suggestions would be appreciated.

Hi ,
I had the same problem , But i fixed the issue by updating patch . Hope this link can help you for all version
as this has patches and explained
http://news.idg.no/cw/art.cfm?id=297D2650-EC09-00A1-048BD74750266743

Video/Camera light not working after upgrade to 975

Hi,
After I upgraded to the latest OS release from Verizon (v5.0.0.975) on my Tour, the light for both my video recorder or camera no longer work. I have done battery pulls and checked the options for each (both set to ON).
I tried searching here first, but didn't find anything. However, a Google search shows posts on other forums about this issue.
I contacted Verizon Support and the person was not able to help. She asked me to go into Options for my video camera and apparently some of the settings have also been removed. So, I asked her to please report this to RIM Support. She mentioned downgrading my OS, which I had already considered. But, since this OS seems stable and I don't use my cameras that much, I'll ride it out for now.
If anyone else is having the same problem, I would encourage you to contact your carriers support and report this. Hopefully RIM will have a fix for this available soon.
Thanks,
RayK

Try the troubleshooting tips here > How to Troubleshoot iSight
iSight is the built in camera.

Itunes won't work after upgrade

ok, i'm an idiot and upgraded to itunes 6.0. before today everything was working great, then after the upgrade itunes won't open anymore. any help would be great!!!

I am having the same problem - if anyone knows what the problem is I would appreciate it.

Caller id not working after upgrade to IOS 8.

I have an iPhone 5 which I upgraded to IOS 8. After the upgrade the caller id does not shows the person's name (which I have on my Contacts) on the screen. Now I installed IOS 8.1.1 but the problem persists. This happens also on an iPhone 5S from my office.
Any recommendations?

Do not pay attention to the previous comment. Sometimes names are shown for numbers stored in IOS address book or Exchange and sometimes (most of the time) not.

Facebook video calling won't work after upgrading

Similar Messages

Maybe you are looking for