Failing when delploying webaccess to weblogic server urgently i need help
what are your suggestions to solve that problem ?
When you say "can't be disabled" you mean you get a security exception, right?
If you want to disable the securitymanager in a JNLP application, you will need to sign the application's jar-files and request the appropriate permissions in the JNLP file.
After that you should be able to disable the securitymanager in your main method.
Similar Messages
-
Dreamweaver CS3 fails when publishing to the web server using WebDAV
Dreamweaver CS3 fails when publishing to the web server using
WebDAV
using an earlier version (7.x/8.x) works fine.
Does anybody know if there is a solution for this.. This is
urgent..
Attempting to call the 1-800-833-6687 number fails with:
recording, music, rings as though someone will finally answer, but
gets a few dial tones and connection goes silent..
Thanks
J.If all of your credentials are correct, Server Name/IP Address, Username, Password, Root Directory and it's still not connecting, I would try toggling the Passive FTP checkbox.
If you still can't connect in DW, try downloading a third party FTP program like Filezilla (free) and uploading there. If the third party app doesn't work either, there is likely a problem with your credentials and you would need to contact your hosting provider to straighten it out. -
BUG: Entering a "version" when deploying to a WebLogic server doesn't work
By default when deploying to a weblogic server the "Version" is set to v2.0. If you change that to something like v2.1 when the application is deployed, the deployment logs still show the Version=2.0. What needs to be done to get the Version in deployment to accept the changes on the deployment form?
Sorry, I wasn't clear. This is a Portal application deployed using MDS. So it doesn't have the file referenced in that blog post. The Version field I'm referring to is on the form that pops up to set the MDS repository. For reasons unknown it will always come up v2.0 even during the first deployment. Regardless of what I change it to the Version always equals 2.0 in the deployment logs.
-
When i restart the weblogic server 9.2,all messages in Topic get cleared
Hi,
When i restart the weblogic server 9.2,all messages in Topic get cleared for inactive dudrable subscribers.
Please advise what the issue here.
Thanks.Hi Tom, Thanks you so much for spending your time on this issue.
A)I didn't specify any persistent mode.so i believe default mode is "Persistent"
B) when i click on durable subscribers link on the corrersponding Topic it is showing 2 users.
actually these durable subscribers are created by executing below code after look up the Topic.
TopicSubscriber tsub = ts.createDurableSubscriber(topic,"mysub");
C) Delivery Mode Override is set to "No-Delivery".
but Time-to-Live Override is set to 21600000 .
i assume Time-to-Live is causing problem.
Please advise.
Thanks.
Edited by rodex at 03/25/2008 3:55 PM -
Weblogic server 10.3 needs restart to reflect jsp changes.
Hello,
I am using weblogic 10.3.5. My problem is when I make changes to JSPs, it is not getting reflected when I refresh the page. Always I have to perform restart of the server.
I checked my weblogic.xml and I have the below configuration also.
<jsp-param>
<param-name>pageCheckSeconds</param-name>
<param-value>0</param-value>
</jsp-param>
I saw this thread: Weblogic server 10.3 needs restart to reflect jsp changes. , but it not helping me.
Can anyone help me?
Thanks.you should also need to change the name space please try below
<?xml version = '1.0' encoding = 'windows-1252'?>
<weblogic-web-app xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://xmlns.oracle.com/weblogic/weblogic-web-app http://xmlns.oracle.com/weblogic/weblogic-web-app/1.1/weblogic-web-app.xsd"
xmlns="http://xmlns.oracle.com/weblogic/weblogic-web-app">
<jsp-descriptor>
<page-check-seconds>0</page-check-seconds>
</jsp-descriptor>
</weblogic-web-app>
http://docs.oracle.com/cd/E23943_01/web.1111/e13712/weblogic_xml.htm#BEIBCAJH
http://docs.oracle.com/cd/E23943_01/web.1111/e13712/weblogic_xml.htm#i1038490
Regards,
Sunil -
Error when I startup the Weblogic server.
Hi
Look I chance my proxy configuration 'Cause before I have a free LAN to navigate on internet. Since then, when I want to startup the weblogic service the following error :
Enter username to boot WebLogic server:weblogic
Enter password to boot WebLogic server:
<14-sep-2010 20H08' PET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<14-sep-2010 20H08' PET> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<14-sep-2010 20H08' PET> <Notice> <Log Management> <BEA-170019> <The server log file /u01/oracle/user_projects/domains/CoreNevadoDomain/servers/CoreNevadoAdminServer/logs/CoreNevadoAdminServer.log is opened. All server side log events will be written to this file.>
<14-sep-2010 20H08' PET> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<14-sep-2010 20H08' PET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<14-sep-2010 20H08' PET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
*<14-sep-2010 20H14' PET> <Error> <Deployer> <BEA-149205> <Failed to initialize the application '01-eng-CoreNevadoEngine' due to error weblogic.application.ModuleException: Exception preparing module: EJBModule(engine-CoreNevadoEngine.jar)*
*[EJB:011025]The XML parser encountered an error in your deployment descriptor. Please ensure that your DOCTYPE is correct. You may wish to compare your deployment descriptors with the WebLogic Server examples to ensure the format is correct. The error was:*
*ParseError at [row,col]:[5,148]*
Message: Tried all: '2' addresses, but could not connect over HTTP to server: 'www.oracle.com', port: '80'..
weblogic.application.ModuleException: Exception preparing module: EJBModule(engine-CoreNevadoEngine.jar)
[EJB:011025]The XML parser encountered an error in your deployment descriptor. Please ensure that your DOCTYPE is correct. You may wish to compare your deployment descriptors with the WebLogic Server examples to ensure the format is correct. The error was:
ParseError at [row,col]:[5,148]
Message: Tried all: '2' addresses, but could not connect over HTTP to server: 'www.oracle.com', port: '80'.
at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:454)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:387)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:58)
Truncated. see log file for complete stacktrace
javax.xml.stream.XMLStreamException: ParseError at [row,col]:[5,148]
Message: Tried all: '2' addresses, but could not connect over HTTP to server: 'www.oracle.com', port: '80'
at com.sun.xml.stream.XMLReaderImpl.next(XMLReaderImpl.java:560)
at weblogic.ejb.container.dd.xml.EjbDescriptorReaderImpl.isDTDBased(EjbDescriptorReaderImpl.java:451)
at weblogic.ejb.container.dd.xml.EjbDescriptorReaderImpl.parseWLDD(EjbDescriptorReaderImpl.java:525)
at weblogic.ejb.container.dd.xml.EjbDescriptorReaderImpl.processWeblogicEjbJarXML(EjbDescriptorReaderImpl.java:388)
at weblogic.ejb.container.dd.xml.EjbDescriptorReaderImpl.createReadOnlyDescriptorFromJarFile(EjbDescriptorReaderImpl.java:196)
Truncated. see log file for complete stacktrace
>
14-sep-2010 20:14:48 com.sun.faces.config.ConfigureListener contextInitialized
INFO: Initializing Sun's JavaServer Faces implementation (1.2_03-b04-FCS) for context '/console'
14-sep-2010 20:14:48 com.sun.faces.config.ConfigureListener contextInitialized
INFO: Completed initializing Sun's JavaServer Faces implementation (1.2_03-b04-FCS) for context '/console'
********* Oracle® BPM - WorkSpace Administrator (Version 10.3.1.0.0 Service Pack 1 Build #94375) is starting *********
Checking Java Runtime Enviroment ...Ok
Initializing enviroment...Ok
Loading Plugins for Workspace Administrator ...Ok
log4j:WARN No appenders could be found for logger (com.sun.faces.config.ConfigureListener).
log4j:WARN Please initialize the log4j system properly.
OpenLog: verbosity level = 2
OpenLog: Registered application name: OpenControls.srvapptest
OpenControls.srvapptest
help me,plz.
ThanksHi,
You can write it inside your ManagedServers Start Script or even you can write it in your "setDomainEnv.sh"(if u are in UNIX OS) or in "setDomainEnv.cmd (if it is WINDOWS)"as described in the below Image:
http://weblogic-wonders.com/weblogic/wp-content/uploads/2010/09/setting_JAVA_JOME_In_script.jpg
The Only difference will be....in the JAVA_OPTION as below:
Unix OS case below
*JAVA_OPTIONS=${JAVA_OPTIONS} -Dhttp.proxyHost=YourProxyHostName -Dhttp.proxyPort=yourProxyPort*
Windows OS Case below
set JAVA_OPTIONS=%JAVA_OPTIONS% -Dhttp.proxyHost=YourProxyHostName -Dhttp.proxyPort=yourProxyPort
Thanks
Jay SenSharma -
Database logon failed when deploy CR on Windows Server 2008
I use Crystal Reports for Visual Studio 2010 Production Release with MVC 2 web aplication and SQL Server 2008 database server. When I compile/run from VS 2010 it running well, but when deploy it on Windows Server 2008, when load certain report (Not All report) face the following exception message:
Database logon failed
Stack Trace is as the following:
at CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e) at CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext) at CrystalDecisions.CrystalReports.Engine.FormatEngine.ExportToStream(ExportRequestContext reqContext) at CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToStream(ExportOptions options) at CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToStream(ExportFormatType formatType) at SequisLife.Controllers.ReportController.run_report(String report_name, IDictionary`2 dic_param)
InnerException:
System.Runtime.InteropServices.COMException (0x8004100F): Database logon failed. at CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.Export(ExportOptions pExportOptions, RequestContext pRequestContext) at CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext)
run_report method is as the following:
private ActionResult run_report(string report_name, IDictionary<string, string> dic_param)
string ls_respon = "";
try
get_sqllogin();
ReportClass rptH = new ReportClass();
rptH.FileName = Server.MapPath(VirtualPathUtility.ToAbsolute(report_name));
rptH.Load();
rptH.Refresh();
Database crDataBase;
Tables crTables;
TableLogOnInfo crTableLogOnInfo;
ConnectionInfo reportConnectionInfo = new ConnectionInfo();
reportConnectionInfo.ServerName = server;
reportConnectionInfo.DatabaseName = database;
reportConnectionInfo.UserID = login_user;
reportConnectionInfo.Password = login_pass;
crDataBase = rptH.Database;
crTables = crDataBase.Tables;
foreach (Table crTable in crTables)
crTableLogOnInfo = crTable.LogOnInfo;
crTableLogOnInfo.ConnectionInfo = reportConnectionInfo;
crTable.ApplyLogOnInfo(crTableLogOnInfo);
ParameterFields lpf_parameters = rptH.ParameterFields;
if (lpf_parameters.Count > 0)
foreach (ParameterField lpf_param in lpf_parameters)
var llst_tmps = dic_param.Where(d => d.Key == lpf_param.Name);
foreach (var param in llst_tmps)
if (param.Key == lpf_param.Name)
if (lpf_param.ReportName == "")
rptH.SetParameterValue(lpf_param.Name, param.Value);
else
rptH.SetParameterValue(lpf_param.Name, param.Value, lpf_param.ReportName);
Stream stream = rptH.ExportToStream(CrystalDecisions.Shared.ExportFormatType.PortableDocFormat);
return File(stream, "application/pdf");
catch (Exception ex)
ls_respon += ex.Message;
ls_respon = " - "ex.StackTrace;
ls_respon += " - " + ex.InnerException;
ls_respon += " - " + ex.Source;
ls_respon += " - " + ex.Data;
return Content(ls_respon);
Please any body hepl me...
Thank's in advanceHi,
I am using CR with visual studio 2010 in windows 7 box 64bit box. using a ADO.net data source. And I need to export .rpt as pdf.The solution works fine in my dev box. by when i try to deploy in a windows server 2008 R2 box (64bit) it fails . Both my dev box and deplyment box uses sql server 2008 DB . Also i am using .Net framework 4.0 (not client profile)
installed the following things in deployment box:
1. CRRuntime_64bit_13_0_1.msi in
2. Also copied the CRforVS_mergemodules_13_0_1 in C:\Program Files (x86)\Common Files\Merge Modules
I get the following error in my Box:
CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e) at CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext) at CrystalDecisions.CrystalReports.Engine.FormatEngine.ExportToStream(ExportRequestContext reqContext) at CrystalDecisions.CrystalReports.Engine.FormatEngine.Export(ExportRequestContext reqContext) at CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToDisk(ExportFormatType formatType, String fileName) at Tesco.Instore.PickingControl.ReportController.PrintDriverDocumentation(String driverDocumentation, Int32 vehicleTripId)] 20/10/2011 08:08:41 PCS Critical Classic .NET AppPool Error running End of Van [Logon failed.
Error in File temp_31b3196f-fd25-45c8-b657-5d9cd7c9dccb {4F74290C-D56E-4FC4-8DEF-371BB5C5B10B}.rpt:
Unable to connect: incorrect log on parameters.]
I also verified the database connection is upto date. while creating the solution
the project build is set to anyCPU.
is there anything else i have to install ?? Please help me ..I am trying this thing from last one week and have not got any proper solution till now -
Multicast Exception when starting a managed weblogic server.
I receive a Multicast Exception when i try to start a managed weblogic server from the same machine on which my admin server is running.
when i try to start a managed server from another machine then it does not allow me to do so.
please help,
Manish.
see Sanjeev Chopra's response on 10/25/00 , subject named "
weblogic.admin.host -- missing
property"...
Kumar
John Kelvie wrote:
I am having the same problem...any suggestions?
"Srividhya" <[email protected]> wrote in message
news:3a107849$[email protected]..
Hi All,
While starting the weblogic managed server, i get the following error:
Starting WebLogic Server ....
<Mon Nov 13 17:50:12 EST 2000> <Warning> <Management> <Unrecognizedproperty: ad
min.host>
<Mon Nov 13 17:50:15 EST 2000> <Error> <Configuration Management> <Errorconnect
ing to admin server and initializing admin home: admin URL:t3://kerala:7001
javax.naming.ServiceUnavailableException. Root exception isjava.rmi.NoSuchObje
ctException: The object identified by [3] could not because found. Eitherit was
has not been exported or it has been collected by the distributed garbagecolle
ctor.
atweblogic.rmi.internal.OIDManager.getServerReference(OIDManager.java:3
78)
atweblogic.jndi.WLInitialContextFactoryDelegate.newLocalContext(WLIniti
alContextFactoryDelegate.java:306)
atweblogic.jndi.WLInitialContextFactoryDelegate.newContext(WLInitialCon
textFactoryDelegate.java:261)
atweblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLIni
tialContextFactoryDelegate.java:230)
at weblogic.jndi.Environment.getContext(Environment.java:129)
atweblogic.jndi.Environment.getInitialContext(Environment.java:112)
atweblogic.management.Admin.initializeRemoteAdminHome(Admin.java:712)
at weblogic.management.Admin.start(Admin.java:295)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:357)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:160)
at weblogic.Server.main(Server.java:32)
On the admin server, it does not give any error.
What could be the reason?
Regards,
Srividhya -
Problem when trying to start Weblogic server
Hi,
I have a problem when in was trying to start the weblogic server from the
Weblogic Console.It Loads all the necessary files and finally it comes out
giving an error "Server start message not received in allotted time, server
process killed.".
But at the same time i can start the server cooly by running the
"Wlserver.exe".Can any help me on this problem
regards
Ramesh
Baan CompanyHi!
I'm quite sure that this is a time out problem. I need about 3 minutes to start
up my weblogic server. It's no problem to start it from a command prompt
(startWeblogic.cmd), but using weblogic console application I always got a time
out after 120 seconds. On a faster computer, where the start up process can be
finished in less then 120 seconds it was no problem to start the server with the
same amount of EJBs.
Does anyone know how to increase the time out parameter for the weblogic console
application?
Best reagards,
Przemek
Ramesh wrote:
Yes Its resource problem i suppose..
My friend who is working with WL advised me to us 128 MB RAM to work with
Weblogic server.
Justin i need one more help
I registered my servlet in Weblogic.properties.But when i try to load
it from the command tab says "Property change error on LOAD".I dont know
what
properties i have to change to load this.
Even the existing example servlets i coundnt Load.!!!!
Can any one help on this problem
Justin Knowlden <[email protected]> wrote in message
news:[email protected]...
I actually got WL to work on my system yesterday. I found that it was aresource
problem. I had to shut down my X Server; if you don't know what the XServer is,
it's (basically) the app that runs a window manager. It was consuming toomuch
of my processing time. WL is now the only thing running on that machine.
Since you have NT, You may want to try shutting down all uneccesarydevices and
app's.
Ramesh wrote:
My System is
Win NT 4.00
Pentium pro 199 mhz
and 80 mb RAM
Is that because of the Memory Problem?
I dont know because i am able run it well when it trought command
prompt.
Justin Knowlden <[email protected]> wrote in message
news:[email protected]...
I posted a comment about this last week and have to receive a reply. Ialso saw
a post from April about this and there were no replies to it, either.
My problem exists on Linux whether I use the console or not. What are
the
specs
for your machine?
Mine:
Linux 2.2.15
P/Pro 199 MHx
128 MB RAM
Ramesh wrote:
Hi,
I have a problem when in was trying to start the weblogic server
from
the
Weblogic Console.It Loads all the necessary files and finally it
comes
out
giving an error "Server start message not received in allotted time,server
process killed.".
But at the same time i can start the server cooly by running the
"Wlserver.exe".Can any help me on this problem
regards
Ramesh
Baan Company--
Justin Knowlden <[email protected]>
Software Developer
MyPoints.com, Inc.
Justin Knowlden <[email protected]>
Software Developer
MyPoints.com, Inc.
Przemyslaw Rychlewski Tech@Spree Software Technology GmbH
mailto:[email protected] http://www.tech.spree.de
Tel +49 (0)30 235 520-34 Bülowstrasse 66
Fax +49 (0)30 217 520-12 10783 Berlin -
SSL Hand Shake failed when using windows 7/vista/server 2008
When trying to connect with ldp.exe on windows 7, vista, or windows server 2008 we get a gslsflnNegotiateSSL * SSL Hand Shake failed in the log file.
When using xp or windows server 2003 we can connect with no problems.
We can connect using a non-ssl port
Does anybody have an idea as to why this might be happing
we are using oid version 10.1.4
Thanks
WayneThis should of some help:
OID is down and it won't start -
WebLogic Server 6.1 download Help
Hi I need WebLogic Server 6.1 for my application.I tried in Oracle site but i am not able to locate this file.If any body knows please help me to download it
Thanks
VijayMay have been previously answered in the question titled "WebLogic 8.1" posted in this forum (Weblogic 8.1
"Use your valid BEA license and support agreement to access Oracle Support site (My Oracle Support or Metalink). Links are part of note 763603.1". -
EAR Deployment Problem with weblogic 10.2. Need help.
Hi,
I have a EAR file exported from MyEclipse IDE. When i am deploying the EAR file in weblogic 10.2, i am not seeing classess and properties were not exploded under WEB-INF/classes in the web project. I can see the classes folder but it's empty.
When i opened i can see EJB project JAR file and web project .war file in the EAR file. I checked the .war file content and i can see all the classes and properties available in the .war file.
Please help me to find, why the classes and properties are not being exploded when i am deploying as package.
Note: When i am deploying from myeclipse as exploded deployment i was able to run the application but i am failing when i deploy as a package (.ear file).
Thank you,
Vijay MI found the answer to this. The documentation is not clear enough, LD_LIBRARY_PATH MUST be set and MUST have a pointer to the directory where the SSL .so modules are. I wrote up a blog article explaining the configuration and detailed this issue.
http://blogs.oracle.com/irm/2010/06/quick_guide_to_oracle_irm_11g_1.html -
HTTP Server (Main) error need help.
Hello,
We are having the following error in the HTTP Server logs and need to understand what is causing this issue.
[Tue Dec 19 15:29:35 2006] [error] [client 192.168.228.32] [ecid: 962577774223,1] File does not exist: d:/oracle/product/oh_as_mid/forms/java/oracle/forms/engine/RunformBundle_en_AU.class
[Tue Dec 19 15:29:35 2006] [error] [client 192.168.228.32] [ecid: 2216708226414,1] File does not exist: d:/oracle/product/oh_as_mid/forms/java/oracle/forms/engine/RunformBundle_en_AU.class
[Tue Dec 19 15:29:35 2006] [error] [client 192.168.228.32] [ecid: 4484450958748,1] File does not exist: d:/oracle/product/oh_as_mid/forms/java/oracle/forms/engine/RunformBundle_en_AU.properties
[Tue Dec 19 15:30:25 2006] [error] [client 192.168.228.32] [ecid: 1166509825:192.168.228.32:1712:2352:20,0] (10054)An existing connection
was forcibly closed by the remote host: MOD_OC4J_0087: Got an unexpected error while calling send() to send a message to oc4j and the
error code is 10054.
[Tue Dec 19 15:30:25 2006] [error] [client 192.168.228.32] [ecid: 1166509825:192.168.228.32:1712:2352:20,0] MOD_OC4J_0053: Failed to call
network routine to send out an ajp13 buffer message to oc4j.
[Tue Dec 19 15:30:25 2006] [warn] [client 192.168.228.32] [ecid: 1166509825:192.168.228.32:1712:2352:20,0] MOD_OC4J_0027: Failed to send
out an ajp13 message to oc4j.
[Tue Dec 19 15:30:25 2006] [error] [client 192.168.228.32] [ecid: 1166509825:192.168.228.32:1712:2352:20,0] MOD_OC4J_0026: Failed to marshal
a request to ajp13 message headers or send them to the web container.
[Tue Dec 19 15:32:43 2006] [error] [client 192.168.228.32] [ecid: 2921083055113,1] File does not exist: d:/oracle/product/oh_as_mid/forms/java/oracle/ewt/alert/resource/AlertBundle_en_AU.class
[Tue Dec 19 15:32:43 2006] [error] [client 192.168.228.32] [ecid: 5360624479132,1] File does not exist: d:/oracle/product/oh_as_mid/forms/java/oracle/ewt/alert/resource/AlertBundle_en_AU.class
[Tue Dec 19 15:32:43 2006] [error] [client 192.168.228.32] [ecid: 911038360600,1] File does not exist: d:/oracle/product/oh_as_mid/forms/java/oracle/ewt/alert/resource/AlertBundle_en_AU.properties
[Tue Dec 19 15:32:46 2006] [error] [client 192.168.228.32] [ecid: 2921083055113,1] File does not exist: d:/oracle/product/oh_as_mid/forms/java/oracle/ewt/alert/resource/AlertBundle_en_AU.class
[Tue Dec 19 15:32:46 2006] [error] [client 192.168.228.32] [ecid: 4793688799699,1] File does not exist: d:/oracle/product/oh_as_mid/forms/java/oracle/ewt/alert/resource/AlertBundle_en_AU.class
[Tue Dec 19 15:32:46 2006] [error] [client 192.168.228.32] [ecid: 859498756624,1] File does not exist: d:/oracle/product/oh_as_mid/forms/java/oracle/ewt/alert/resource/AlertBundle_en_AU.properties
Any help would be great.More information from the OC4J_BI_Forms application log file.
06/12/20 07:44:35 formsweb: Forms session <78> failed during startup: no response from runtime process
06/12/20 07:44:35 formsweb: Forms session <78> exception stack trace:
oracle.forms.engine.RunformException: Forms session <78> failed during startup: no response from runtime process
at oracle.forms.servlet.RunformProcess.connect(Unknown Source)
at oracle.forms.servlet.RunformProcess.dataToRunform(Unknown Source)
at oracle.forms.servlet.RunformSession.dataToRunform(Unknown Source)
at oracle.forms.servlet.ListenerServlet.doPost(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:824)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:224)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:133)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
at java.lang.Thread.run(Thread.java:534) -
Could not connect to the server "localhost". Need Help!!!!!!
I have installed CF MX 7.0.1 in my Mac (Intel Duo), but, for
some reason I have to configure my "built-in-server" manually!!!
When I tried to access to te configuration wizard @
http://localhost:8500/CFIDE/administrator/index.cfm
I get an error message: Could not connect to the server
“localhost”. Please, help!!!!!!
I uninstalled and reinstalled CF several times... no luck...
I don't have experience with this product and at this point I'm
going crazy!!!
Thanks...
Natacha
Textquote:
Originally posted by:
lyfizgood
I too am having problems with this. I purchased Studio8 and
using the ColdFusion Getting Started tutorial, I get as far as
testing server settings in Dreamweaver. But then when instructed to
enter the RDS password, I get '1. The url specified for this site's
testing server may be incorrect:
http://127.0.0.1:8500/CFIDE/administrator/
2. The testing server may be incorrectly configured (for example,
ColdFusion may not be running).' I have tried not including 8500,
changing to localhost, CFIDE/gettingstarted/tutorial, etc. I have
also checked to see if jrun.exe is running to verify that CF is
running. I assume that is one way of verifying. Any suggestions?
Lyfisgood... youre using windows right? If so you may want to
actually open a second thread... I saythis only as youll probably
get more of a response as there seem to be more peopel running it
on Win than OS X. But ill try and help as much as i can... ive
installed on XP before so maybe ill have something of value to
offer.
Do you have windows firewall or any other firewall running?
Are you sure its actually running on port 8500 as opposed to
8000,8100, 8001? -
Hi,
I use CF 7.02 on 6 applications and i have a very serious
problem : the server freezes 2 or 3 time a day.
My configuration is :
- Win 2003 R2 / Sp2
- Ram : 2 Go
- CF Version : 7,0,2,142559
- Java Version : 1.4.2_09
- MS SQL Server 2005 (on other server)
The server was re installed few days ago so the system is
clean.
I cannot find one recurring event just before the freeze.
I don't understand why CF freezes like that.
I need help to solve this problem and save business with this
customer.
Thx
FredHi Tal, I get the same problem (but far less often) and I
think/80 % sure! (after months of narrowing down the problem) for
me it has something to do with errors in the code when generating a
pdf using cfdocument tag, it seems to crash the cf service when an
error occurs. Do you use cfdocument to generate pdf's in any of
your 6 apps, If so try disabling this feature temporarily
thanks
Oli
Maybe you are looking for
-
Subsequent debit to post to GL instead of vendor account
Hi We will debit to stock account and credit to vendor account for unplanned charges thru subsequent debit. Due to business requirements to post the unplanned charges to GL account instead of vendor account. The desired entries are debit stock accoun
-
Aperture 2.0.1-images flash by uncontrollably
I just updated to 2.0.1 and now when I go to an album or project, the images flash by uncontrollably. It only stops when the last image in the project/album is reached. In other words, I cannot select an image at all. I have tried rebooting the compu
-
I can't figure out how to make carriage returns that people enter in forms into <br> tags in cfml. I looked up "replace vbCrLf" in google and got a bunch of asp results. Can anyone help me? When people enter returns in my forms they get stripped off
-
Airport express wireless networks stop working. wired ports fine
Hi, My AirPort Extreme has recently started this odd behavior. For. Some reason, the wi-fi networks fail. The device cannot be detected by the management utility and powering cycling the device is the old way to recover. I have confirmed that the w
-
Flash Builder 4b2 or Flex Builder 3
Starting a new project to rewrite a beefy Flex 1.5 application. Should I start with Flash Builder 4b2 or Flex Builder 3? Storyboards will be complete next week and I expect to reach end of job by February of 2010. Some customization of components wil