FCP Minimum Installation Question

FCS 2—
I'm looking to install my copy of FCP on a MacBook Pro in order to dump P2 footage to it during a shoot I have going this week. I'm not interested in installing or using the whole suite. I simply need FCP for moving my footage off of my P2 cards (Log and Xfer) so I can keep shooting.
Is there a way to put FCP and only FCP on a MacBook Pro? If not, what's the minimum program set I can get away with?

During the install process you can chose to install only the application(s) you want. If you want ti install ALL of the applications in FCS, they only take up about 4gb of space. You can elect not to install the extra content (58gb) at all, or you can install them on another volume.
-DH

Similar Messages

Photoshop Elements 10 Installation Question

How can I tell if my software installed properly? The software came with three discs, and it only installed the first disc. I am new to Photoshop, and do not know if my software installed properly? Can anyone help?

Gautham K,
Thank you for your quick replies. I have checked,and my OS is indeed 64 bit. I have been using the 32 bit version of Adobe Photoshop Elements 10, since I installed it last evening. I have a few quick questions;
Will I loose any functionality if I stay with the 32 bit version versus un-installing and installing the 64 bit version from disc 2?
If I decide to un-install, and re-install from disc 2, will there be any software registration issues (as I have already registered the software)?
Thanks again for all of your help.
Jim
Gautham K <[email protected]> wrote:
Gautham K http://forums.adobe.com/people/Gautham+K created the discussion
"Re: Photoshop Elements 10 Installation Question"
To view the discussion, visit: http://forums.adobe.com/message/4062666#4062666

Installation Questions Documaker 12.3 Enterprise Edition

We are looking to install Documaker 12.3 Enterprise Edition and have the following installation questions:
When installing Documaker can we have our own VM in our own OU for the WAS application servers? This will make maintenance easier on our side. There doesn’t seem to be anything in the documentation saying this is a good or a bad idea.
Our WAS Admins would like to know what the scripts in the Post-Setup documentation actually do. Is it possible to use our existing scripting environment to build the necessary pieces instead of using scripts from the documaker install? If it’s not possible, can we get a look at the documaker scripts before we run them?
We would like to know if WAS 8.5 is supported, or if version 7.0.0.27 in the requirements pdf is the only version supported?

When installing Documaker can we have our own VM in our own OU for the WAS application servers? This will make maintenance easier on our side. There doesn’t seem to be anything in the documentation saying this is a good or a bad idea.
The typical installation scenario is to have 3 tiers - application (WAS), application (Documaker), and data. WAS tiers host web applications (Dashboard, Administrator, Interactive) as well as providing database connection pools and JMS queues for messaging - it is expected that the WAS environment is a clustered environment and that the applications are deployed to the cluster members, which can be physical or virtual. For the Documaker application server, these can be physical or virtual as well. It's recommended to install Documaker on single-purposes environments, however there's nothing to prevent you from doing otherwise. The Documaker applications are self-contained JVMs and can be tuned accordingly.
Our WAS Admins would like to know what the scripts in the Post-Setup documentation actually do. Is it possible to use our existing scripting environment to build the necessary pieces instead of using scripts from the documaker install? If it’s not possible, can we get a look at the documaker scripts before we run them?
The installation process (currently) writes the scripts according to responses provided during the installation process. The scripts can be reviewed/modified prior to execution.
We would like to know if WAS 8.5 is supported, or if version 7.0.0.27 in the requirements pdf is the only version supported?
The official supported version of WAS is 7.0.0.27, however WAS 8.5 may be suitable (I believe there might be a fix pack requirement there - would recommend you submit a question to Oracle Support for verification).

Apache or Oracle installation questions

Which discussion group is best for asking Apache or Oracle 8.1.7 installation questions?

FRED
Apache is best addressed on the ias 9i forum.

X79-gd45 (8d) - Windows 7 Pro x64 installation questions

Hi,
I have a MSI X79-GD45(8D) board with i7-3930k processor that I am trying to install Win 7 x64 Pro on. I have a Sandisk Xtreme 240 SSD that I will be using as a system disk and 2X WD 1TB Black SATA 6GB/s (faex) drives that I will be using in a RAID 1 configuration for storing quickbooks and other data. This machine will run a quickbooks enterprise server serving 10 people
I want to get the installation right from the get go so that I can start testing it asap. Here are the steps that I will be taking to get this going. Could you folks comment on it so that I can modify it as needed. Thanks.
I have already installed the main board, 32GB RAM, Processor, fans etc and have setup the case. It does post without issues so far. Now for the installation, I have not partitioned the SSD (intend to make use of the full 240 GB) and leave the WD disks in a Raid 1 taking up the whole disk space (no partitions).
I am installing Win 7 x64 Pro on the SSD. Here I have several questions:
1. Do I set the SATA mode to RAID or should I just leave it at AHCI? I am assuming that this board recognizes drives in AHCI mode and installs Win 7. I ask this question because I will be using two WD SATA drives in Raid 1 for storing data later. Will the SATA mode be AHCI irrespective of that fact or should I change it to RAID after installing Win 7?
2. Should I install Intel RSTe iaAHCI or iaStorA (ver RSTe_Win7_8_64bit_3.5.0.1101_F6) with the F6 option for the setup I mentioned. I know the F6 installation in Win XP, but a little confused with Win 7. I ask this because, I have read some discussions of Intel drivers vs Microsoft's version for AHCI. Raid is confusing though. Please explain in detail if you can. Appreciated.
3 If I do F6 installation, do I install the AHCI/RAID drivers again after Win 7 is installed or does Windows properly load the F6 installation?
SSD, AHCI are all new to me with this build. I have tried to educate myself, but have some of the confusions that I listed above. Please explain how I can properly install it to the spec that I outlined above.
Your time, patience and help are all appreciated. Thanks
t
core - i7 3930k
MSI X79-GD45 (8D) MB
CoolerMaster 212 Evo Directpipe cooler (push pull 2 fans)
Corsair 500R Case with fans in the front, back, side, top (lots of air movement) - Holding steady at 42 C idle (efi readings)
32GB Patriot Cas 10 1600MHz XMP certified memory (XMP enabled in efi)
Gigabyte 6670 HD video card with 1gb ddr3(this machine will be used as a QB server)
Will install Win 7 x64 pro

Quote from: tommycat95 on 16-December-12, 12:17:35
Hi,
I have a MSI X79-GD45(8D) board with i7-3930k processor that I am trying to install Win 7 x64 Pro on. I have a Sandisk Xtreme 240 SSD that I will be using as a system disk and 2X WD 1TB Black SATA 6GB/s (faex) drives that I will be using in a RAID 1 configuration for storing quickbooks and other data. This machine will run a quickbooks enterprise server serving 10 people
I want to get the installation right from the get go so that I can start testing it asap. Here are the steps that I will be taking to get this going. Could you folks comment on it so that I can modify it as needed. Thanks.
I have already installed the main board, 32GB RAM, Processor, fans etc and have setup the case. It does post without issues so far. Now for the installation, I have not partitioned the SSD (intend to make use of the full 240 GB) and leave the WD disks in a Raid 1 taking up the whole disk space (no partitions).
I am installing Win 7 x64 Pro on the SSD. Here I have several questions:
1. Do I set the SATA mode to RAID or should I just leave it at AHCI? I am assuming that this board recognizes drives in AHCI mode and installs Win 7. I ask this question because I will be using two WD SATA drives in Raid 1 for storing data later. Will the SATA mode be AHCI irrespective of that fact or should I change it to RAID after installing Win 7?
2. Should I install Intel RSTe iaAHCI or iaStorA (ver RSTe_Win7_8_64bit_3.5.0.1101_F6) with the F6 option for the setup I mentioned. I know the F6 installation in Win XP, but a little confused with Win 7. I ask this because, I have read some discussions of Intel drivers vs Microsoft's version for AHCI. Raid is confusing though. Please explain in detail if you can. Appreciated.
3 If I do F6 installation, do I install the AHCI/RAID drivers again after Win 7 is installed or does Windows properly load the F6 installation?
SSD, AHCI are all new to me with this build. I have tried to educate myself, but have some of the confusions that I listed above. Please explain how I can properly install it to the spec that I outlined above.
Your time, patience and help are all appreciated. Thanks
t
core - i7 3930k
MSI X79-GD45 (8D) MB
CoolerMaster 212 Evo Directpipe cooler (push pull 2 fans)
Corsair 500R Case with fans in the front, back, side, top (lots of air movement) - Holding steady at 42 C idle (efi readings)
32GB Patriot Cas 10 1600MHz XMP certified memory (XMP enabled in efi)
Gigabyte 6670 HD video card with 1gb ddr3(this machine will be used as a QB server)
Will install Win 7 x64 pro
1.) IF you are going to be using the mainboads raid controller for the data drive. You need to set the mode to raid for the os install as well. Unless you are going to use the extra chipset for the SSD. (Ports 7 &8) You won't be able to enable raid later w/o re-installing the os.
2.) I put the os(Install) on a usb flash drive, I also include all of the drivers on this flash drive and load the newest versions even if it detects the drive right out of the gate.
3.)Once inside the OS, you would install the irst drivers there as well. (They are combined the raid bios / drivers and os drivers)
If this isn't going to be a very high I/o server, I probably wouln't bother with the SSD but since you have it you would just use it as a non-member drive of the raid. Have a fast drive for the os, isn't going to help the server all that much as most of the I/O will be on the data drive.
If this is going to be a heavily used server(high i/o) you may want to look at a raid 5 configuration for the os and data drives. As SSD's degrade over time and aren't really optimal for contant use like in a server. Raid 5 requires 3 drives minimum and is striping and mirroring so you get the best of both worlds.
http://en.wikipedia.org/wiki/Standard_RAID_levels
However, the board based raid controller isn't really the best for this set up. I am fairly loyal to Adaptec Raid controllers although you need to contact Adaptec (or whoever) in regards to compatiblity as MSI doesn't test server compoents on thier desktop products.
This is the one I last used:
http://www.neweggbusiness.com/Product/Product.aspx?Item=N82E16816103220
Quote
PMC-Sierra PM8013 Dual Core RAID on Chip (ROC)
Enclosure management support via LED header and SES2/ SGPIO
Intelligent Power Management – Reduces power and cooling costs by as much as 70%
512MB of DDR2 667MHz
Although it is probably overkill in your situation.
Also, look into the SAS drives as opposed to the sata drives. (if you use a raid card)
http://www.techrepublic.com/blog/networking/how-sas-near-line-nl-sas-and-sata-disks-compare/5323
Also see: http://www.microsoftstore.com/store/msstore/pd/Windows-Server-2012-Essentials/productID.258685800/search.true

Troubleshoot FCP 7 installation

Hi everyone,
Just bought a new Mac and immediately upgraded to Yosemite when I opened it. I'm trying to install FCP 7 and every time the installation begins and then stops mid-way stating 'Installation Failed'. I'm new to Mac...is there any way to get this program to install?

ASk this question in FCP studio forum. This is FCPX forum

VMWare - networking and ESXi installation questions

Hey all, hoping for some assistance on building my servers.
I am likely going with SuperMicro 2028R-E1CR24N due to cost and the fact that I can put Samsung Pro 845DC SSD drives in there and it will be covered under warranty (does anyone use SuperMicro today?), but am still considering HP DL Gen9 series servers because, well, they are HP and its always a slightly safer bet than SuperMicro...but the costs with SSD drives is just too high
Question 1.....
I am unsure whether to get 10GB RJ 45 NICs or the 10GB SFP+ NICs
Not sure between Intel 520X, 540, 560...etc.
The switches these servers will be plugging into will be Cisco 3750X switches, they currently don't have 10GB SFP+ modules yet but I could easily purchase though.
So I am unsure if SFP+ provides better and TRUE 10GB throughput and bandwidth? Or is RJ45 10gb NICs ok and I simply just plug them into the regular ports on the switch (I think they are set to auto/auto/1GB though?)
I also have the option for X540 Quad Port 10GBAse-T but unsure if I need it or how it could help me...
Question 2....
SuperMicro doesn't have slots for SD or MicroSD cards for the ESXi installation but they do have a 64GB Sata 6GB/s Disk on Module (MLC)..I know I don't need the space and it doesn't look like it needs one of the regular drivebays on the server for this, so will this be sufficient?
Does anyone use this today and how is the performance?
HP has slots for MicroSD cards...
Thanks all!

The minimum version, for both Windows 8 and 8.1, is ESXi 5.1
To upgrade, you need to upgrade at least one of your hosts to ESXi 5.1. To manage that host with vCenter, you will need to upgrade vCenter to 5.1 as well, which will manage your ESXi 5.0 and 5.1 hosts. See the following link for interoperability: http://partnerweb.vmware.com/comp_guide2/sim/interop_matrix.php
Here is the link to upgrade a host to ESXi 5.1:
http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2032757
Here is the link to upgrade from vCenter 5.0 to 5.1:
http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2032283
I strongly recommend you use the VMware Interoperability Guide, in case you have older ESXi hosts (i.e. 3.5) that will no longer be managed when you move to vCenter 5.1.
Hope that helps.

Pre-Sales Installation Questions on Adobe CS6

I am thinking about getting Adobe Creative Suite Design Web Premium CS6 from the local campus bookstore so I can use it with the web certificate program I am taking. They have a boxed version which I will probably get. Less expensive than the digital download card version. I had some pre-sales question before I commit to buying it. The person I talked to on the phone was not able to answer a few questions about the software, must have been a newbie and unfortunately the only one in the department at the time.
Since I will be purchasing the boxed version directly from the store, do I need to still e-mail some kind of student proof to Adobe or is a student e-mail sufficient? How does that work part of the installation work/what's involved? Is there a serial number in the box already or will it be sent by e-mail?
Also, my Mac may be on it's last leg but it seems to be hanging in there. Can't afford to buy a new computer just yet. What happens if the hard drive experiences some kind of data failure. If I need to reinstall on a new computer or replacement boot drive, do I have to repeat the whole process of verification of some kind prior to re-installing?
Once I graduate (and understand that will not be able to keep my student email address), how will this effect me in regards to the Adobe software? What if I need to reinstall or install it on a laptop (I heard you can install it on two computers)?

Since I will be purchasing the boxed version directly from the store, do I need to still e-mail some kind of student proof to Adobe or is a student e-mail sufficient? How does that work part of the installation work/what's involved?
See http://www.adobe.com/education/students/student-eligibility-guide.edu.html?
Is there a serial number in the box already or will it be sent by e-mail?
See https://www.studentteacherlicensing.com/
Also, my Mac may be on it's last leg but it seems to be hanging in there. Can't afford to buy a new computer just yet. What happens if the hard drive experiences some kind of data failure. If I need to reinstall on a new computer or replacement boot drive, do I have to repeat the whole process of verification of some kind prior to re-installing?
You only verify once. Acceptance makes you eligible for a serial number.
To re-install after that, you install the software and enter your serial number.
Ensure that your computer meets the minimum requirements to run CS6.
Once I graduate (and understand that will not be able to keep my student email address), how will this effect me in regards to the Adobe software?
You can still continue using your student software after you graduate.
http://prodesigntools.com/difference-between-adobe-cs5-student-editions-vs-regular.html
You will pay normal retail price for other Adobe software or to upgrade or to join the Cloud.
What if I need to reinstall or install it on a laptop (I heard you can install it on two computers)?
Download the software installer (or use your disc), install it and enter your serial number.
Your license entitles you to activate the software on a maximum of two computers at the same time.
Note: the CS6 license is operating system specific i.e. works on 2 x Windows only or 2 x Mac only. You cannot mix and match. However you can mix and match Cloud (CC) software.

Adobe AIR installation questions

Hi all,
I'm looking into the possibility of distributing an application with Adobe AIR and I've a few questions about the Adobe AIR installation process. Just to give you some background on the situation I'm in - if a user wants to use the service I'm working on, they need to install a binary application on their computer. We've a web site which communicates with this binary application. As the user as to install the binary application to begin with, we're beginning to look at AIR as a possible alternative to distributing the web content through a browser.
1. Adobe AIR installation requests that the user enters their computer password. Is there any way to retrieve this password from a separate installer? The binary application that we ask our users to install asks the user for their password and it would be nice to not ask the user to enter their password twice. Are there any possibilities for sharing this password between our binary application and the Adobe AIR installer?
2. If I sign up as a re-distributer of AIR, is the Adobe EULA which is displayed at the start of installation still necessary? I'm already displaying one EULA (with the binary application) and I'd prefer not to have to display two.
3. I'm assuming that there is no way to specify the directory into which I'd like the Adobe AIR runtime to be placed - can you confirm that Adobe AIR is always installed in the /Applications folder on mac and c:/Program Files on Windows?
This question goes out to Adobe AIR developers - If you have distributed your application with Adobe AIR, have you ever stumbled across the situation where a user has uninstalled the Adobe AIR runtime (either intentionally or unintentionally) and you are now left in a situation where a user cannot access your services because Adobe AIR is not installed on their computer. If so, are you aware of any usable fallbacks other than to tell customers that they have to have Adobe AIR installed to run the application?
Thanks
Sean

1: We are working on a method to use a local socket to communicate with an installed c# application on the users machine. The situation is very similar, however we store credentials encrypted and accessible to the installed binary. If those credentials do not exist the AIR app requests the user to input them and they are sent to the binary. These credentials are stored either per session, daily or forever per the user's preferences. We use this method to let AIR be the front end it was designed to be and leave all the heavy lifting OS / processor wise to the binary. Unsure if this would help but you can read a bit more on using local sockets here: http://help.adobe.com/en_US/AIR/1.5/devappshtml/WS5b3ccc516d4fbf351e63e3d118666ade46-7caf. html
2: The EULA is still required as the End User has to accept it. If there's a way around that, I'm not aware.
3: The installation directory can be changed by the user unless you are performing silent installs (available when you sign a redistribution agreement). I don't recommend relying on the installation directory never changing.
Try using nativePath to determine where your program location is: (javascript)
//application directory
var file = air.File.applicationDirectory.resolvePath("testfile.html");
air.trace(file.nativePath);
//application storage directory
var file = air.File.applicationStorageDirectory.resolvePath("testfile.html");
air.trace(file.nativePath);
4: I've faced the problem where the AIR runtime is not available, but we always fall back on the badge there. For what it's worth it's pretty handy at detecting requirements and getting them to the user.
hope that helps

FCP to HDCAM Question!

Hello,
I'm cutting a 4 min short film in FCP 6.0.5. We've recently been accepted to a fest that wants HDCAM. We shot on the XDCamEX1 1080p24 (35mb/s) and set our sequence settings to match this.
I have two questions:
1. I'm doing the mix myself in FCP, with some sweetening in SoundtrackPro. It is a fairly simple mix, but how should I monitor the overall sound? The loudest point in the film hits about -6db on FCP's audio meters. Is that correct? Also, we're projecting in a large theater, so I've been mixing with high quality headphones in order to hear any hiccups within our production audio. It sounds decent. Do you think we will be okay or theater speakers projecting a stereo mix pick up more discrepancies?
2. I'm color correcting the film myself. Considering our master will be on HDCAM, should I use my 720p LCD TV as an external monitor or my 23" 1920x1080 apple cinema display? Those are the only two options I have. What pitfalls should I look out for?
Thanks for any help you can give.

Well, if it were me and these were my options, I would probably use the cinema display to color correct because at least I'd be able to get a pixel for pixel simulation of the picture since you're editing 1080p.
However, when you output, I'd rent an HD QC monitor in addition to the HDCam deck to double check my work and ensure a good-looking master. You won't be able to control the environment that it's being projected in, so your best bet is to produce a good-looking tape.
Andy
PS: As for the audio, find out if the festival has tech specs on audio levels. Also, it's ok to mix with headphones on, but you'll really need to hear the film on speakers. Preferably a good set, and an old, beat up set. That will give you perspective on how it's likely to sound in the theater.

New Tiger 10.4.6 installation Questions

Just installed a new retail version of Tiger 10.4.6 today. I bought it from Apple. It's up and running and I'm using it now, but I have some questions and things I'm not sure about. When I bought the DVD the Apple rep told me it was not compatible with classic the way my old version of OS 10.1 was. He said the only way I could use OS 9 with it was to reboot to it ( I've already tried that and it works).
Today I installed Tiger using the custom option as I did not want to erase the harddrive. It would appear that Tiger, during the installation, went through what was on the harddrive, picked what would run on Tiger, and left the rest in OS 9.2.2. Yet, when you click on System Preferences there it is: "Classic". Now I wonder if I can use it?
It did not load any microsoft applications at all. I did find a folder named "previous system" on the harddrive which I assume is the archived 10.1 : It's a 750.4MB file.
I have not yet udated to 10.4.11 and I wonder if I need to?

When I bought the DVD the Apple rep told me it was not compatible with classic the way my old version of OS 10.1 was. He said the only way I could use OS 9 with it was to reboot to it ( I've already tried that and it works).
That applies to Mac OS X 10.5, not 10.4.
Yet, when you click on System Preferences there it is: "Classic". Now I wonder if I can use it?
You can. Some components may need to be updated.
I have not yet udated to 10.4.11 and I wonder if I need to?
If the new update contains features or fixes useful to you, you should install it.
(31696)

Some installation questions concerning AS and 8i

I will be installing 8i Enterprise Edition so that I can work with 9i AS. I have read through most of the Installation Guide for Oracle 8i - Enterprise Edition Release 3 (8.1.7) for Windows NT. I have some questions that didnt seem to be addressed in the documentation.
How to access Web Site component?
Appendix A, 'Individual Components Available for Installation,' indicates that the Oracle Enterprise Manager Web Site component is not included in either the Typical or Minimal installations of Oracle 8i Enterprise Edition. Is it available through a custom installation, or how do I access this component?
Advanced Security questions:
That same appendix also makes it clear that one of the primary differences between the Typical and Minimal installations is all of the Advanced Security features (encryption and integrity support; authentication support; and so on). It seems that I will need the Advanced Security component, because I will be configuring a database that stores usernames and passwords. However, I will be working with Oracle Portal. Can security features be configured just through Portal and 9i Application Server, or do I need to use Advanced Security instead, or in addition to, Portal and AS?
From what I understand, Advanced Security works with SSL (Secure Socket Layers). Does this affect visitors' ability to access a Web application anonymously before login (doesnt interaction with an application in SSL require online exchange between computers of authenticated, encrypted digital certificates? I hope this question makes sense; I'm new to the topic.) Is there a short answer to this question?
Application Server instead of Oracle HTTP server:
I also saw in Appendix A that the Oracle HTTP server powered by Apache is included with both the Typical and Minimal installations. It's also bundled as a "Web listener" with the Oracle Enterprise Manager Web Site.
However, I will be installing 9i Application Server instead to work with the 8i database. Will this cause any conflicts? I'm just wondering if the Oracle HTTP server component can be excluded from the beginning, without doing a custom install. I did see on pg. 3-6 of the Installation Guide (under 'Oracle Enterprise Manager Web Browser Requirements') that Oracle Enterprise Web Site does support the Oracle Internet Application Server.
Also, I understand from the section on 'Mandatory Individual Component Requirements' that Advanced Security "requires preinstallation of an LDAP directory such as Oracle Internet Directory (provided on the component CD-ROM)." It refers me to the Oracle Advanced Security Administrator's Guide for further information.
Oracle Internet Directory:
However, I haven't been able to access the Security Administrator documentation yet for installation procedures since I haven't been able to successfully download 8i Enterprise Edition (with all of the supporting documentation) yet.
I looked at the online 8i documentation at http://technet.oracle.com/docs/products/oracle8i/doc_index.htm but did not see any reference to the Advanced Security Administrators Guide.
As for Oracle Internet Directory itself, I did just find the Oracle Internet Directory Administrator's Guide on the oracle8i/doc_index.htm page mentioned above - so that should help.
I also looked at the Oracle Internet Directory download page to see if links to documentation might be provided there, but saw that "Oracle Internet Directory Release 2.1.1.0 is delivered as part of Oracle8i Release 3" which leads me back to the 8i Enterprise Edition page where Ive been experiencing download difficulties. So far as I know, theres no evaluation-version CDs available for this software, though there are evaluation CDs available for 9i AS.
null

Urfaust wrote:
You can use the rankmirrors script to determine which is the fastest mirror for you.
http://wiki.archlinux.org/index.php/Mir … heir_Speed
@op - the tip that urfaust posted is contained in the beginners_guide wiki article. You should not attempt installing arch without reading this guide. If you have two computers, you can install arch on one while browsing to the guide on the 2nd.

Oracle 9iAS installation question-oci.dll error

Hi all
I have a question about 9iAS installation. Can we install 9iAS in NT??. I downloaded from the site, installation for NT. While installing I get error like "could not write oci.dll error"..I'm installing the portal and wireless type and I have my Oracle9i database installed on the same machine. Can anybody suggest how to rectify this error.
Thanks a lot

Are you trying to install in the same Oracle Home directory as the database? You should install in a different OH. Furthermore, 9iAS itself also installs in 2 OH's. You will end up with 3 OH's.
It is not a good idea to install the database and 9iAS on the same server, unless you have a really big one.

FCP user preference question

I got a project from overseas, gotta fly there to edit a video. they provide my basic facilities.
I used to edit on my own machine....because the short cuts and whole the favorite effects and transitions that I saved in my FCP.
So my question is, since I gonna shift my FCP user preference files to another FCP, do they affect other editor's preferences. I am pretty sure on the FCP, there are lots of preference settings that other editors made.
in particular, let's say my shiftcontrol2 is 3 ways color correction tool, but on the computer that I am going to use might not be the color 3 ways, it might be some other functions...
can i just save their preference in a folder, and put my preference in , and after i am done, and put back their preference..?
thanks for your advice and suggestion in advance,
your help is highly appreciated
Hiro

Hiro
You can use FCP Rescue to backup FCP preferences file and restore it later:
http://fcprescue.andersholck.com/
Or you can do it manually:
http://docs.info.apple.com/article.html?artnum=93385
Hope that helps !
Alberto

FCP Sound Syncing Question

Hey Everyone,
I have an audio syncing question for you. Any help would be greatly appreciated!
I am cutting in FCP. I logged and captured my footage and with timecode breaks, etc. the tape was cut up, and I was left with eight files, let's call them Footage1-Footage8. I have completed my cut of the piece using the in-camera audio that was linked to the video on the DV tape that I imported. Our sound guy in the field used a DAT recorder to record the production audio and apparently captured the timecode to the audio files, so that it matches the video (i.e. the DAT recorder and our cameras - DVX-100s had synced timecode during the shoot). The DVD he gave me has 20 audio files as .wav, let's call them Audio1-Audio20. My question is, now that I have finished my cut, I would like to replace the current audio tracks with the production audio. How can I sync the audio with the video and replace it in what I've cut. Or perhaps I can't, in which case - how can I sync them up and THEN cut, but I'd really rather have to not do that, lol!
Thanks for your advice!

Sorry about the long winded post, though.
I guess my real question, summarized is - is there a way to sync separately recorded production audio (that has timecode) with the footage that I shot (that has the same timecode as the audio, but also has in camera audio that accompanies the video track - I would imagine I can just "cut" the extra audio tracks, however).
I'm at my bay trying to figure this out, and I've got nothing, and the people I work for don't want to spring for that bwf2xml program you were talking about What's the emote for pulling one's hair out?

FCP Minimum Installation Question

Similar Messages

Maybe you are looking for