FCPX causes system beep during program startup

Just today FCPX seems to be causing a beep in my computer when I startup the program.. I also just had one when I shut dowb the program.
It seems to beep when Compressor Settings are laoding in FCPX.
I trashed all of my preferences for FCPX, Compressor, and Motion.
I also thought hat it might be a problem with my FXFactory Plug.  I realized that there was an update the otehr day, whcih I assume was for the FCPX update.
I downloaded that and still got the beep.
I also downloaded my Coremelt V2 plugins again as well.
Any ideas?
Thank,
Michael

BTW this is just an upate to the above message, as I forgot to mention a few things.
Just today FCPX seems to be causing a beep in my computer when I startup the program.. I also just had one when I shut down the program.
It seems to beep when Compressor Settings are loading in FCPX.
I am thinking that it's an issue with a plugin, as I checked the Console and noticed this  "Cannot find function pointer NewPlugIn for factory"
The entire laod code is below.
I trashed all of my preferences for FCPX, Compressor, and Motion.
I also thought hat it might be a problem with my FXFactory Plug.  I realized that there was an update the other day, which I assume was for the FCPX update.
I downloaded that and still got the beep.
I also downloaded my Coremelt V2 plugins again as well.
Any ideas?
BTW, if anyone can make heads or tails of this, here's the code from Console
Feb  4 15:18:57 Video-Computer Final Cut Pro[2008]: Error loading /Library/Plug-Ins/FxPlug/MBCC.fxplug/Contents/MacOS/MBCC: dlopen(/Library/Plug-Ins/FxPlug/MBCC.fxplug/Contents/MacOS/MBCC, 265): no suitable image found.  Did find:\n /Library/Plug-Ins/FxPlug/MBCC.fxplug/Contents/MacOS/MBCC: no matching architecture in universal wrapper
Feb  4 15:18:58 Video-Computer Final Cut Pro[2008]: Error loading /Library/Plug-Ins/FxPlug/Looks3.fxplug/Contents/MacOS/Looks3: dlopen(/Library/Plug-Ins/FxPlug/Looks3.fxplug/Contents/MacOS/Looks3, 265): no suitable image found.  Did find:\n /Library/Plug-Ins/FxPlug/Looks3.fxplug/Contents/MacOS/Looks3: no matching architecture in universal wrapper
Feb  4 15:19:51 Video-Computer Final Cut Pro[2008]: Error loading /Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin/Contents/MacOS/DVCPROHDAudio:  dlopen(/Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin/Contents/MacOS/DVCPROHD Audio, 262): no suitable image found.  Did find:\n /Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin/Contents/MacOS/DVCPROHDAudio: no matching architecture in universal wrapper
Feb  4 15:19:51 Video-Computer Final Cut Pro[2008]: Cannot find function pointer NewPlugIn for factory C5A4CE5B-0BB8-11D8-9D75-0003939615B6 in CFBundle/CFPlugIn 0x1498ea700 </Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin> (bundle, not loaded)
Feb  4 15:21:08 Video-Computer Final Cut Pro[2008]: error: FigTimeGetSampleNumber t.timescale == 0 || Non-Numeric(t) || Invalid(t) || sampleDuration.timescale == 0 || sampleDuration.value == 0 (t=inval, sd=0.016683(1001/60000))
Feb  4 15:22:33 Video-Computer [0x0-0xf50f5].com.apple.FinalCut[2008]: <CFArray 0x13d5f06a0 [0x7fff702c8ee0]>{type = immutable, count = 1, values = (
Feb  4 15:22:33 Video-Computer [0x0-0xf50f5].com.apple.FinalCut[2008]:      0 : <CFBasicHash 0x13e0dd5e0 [0x7fff702c8ee0]>{type = mutable dict, count = 0,
Feb  4 15:22:33 Video-Computer [0x0-0xf50f5].com.apple.FinalCut[2008]: entries =>
Feb  4 15:22:33 Video-Computer [0x0-0xf50f5].com.apple.FinalCut[2008]: }
Feb  4 15:22:33 Video-Computer [0x0-0xf50f5].com.apple.FinalCut[2008]: )}
Feb  4 15:22:33 Video-Computer [0x0-0xf50f5].com.apple.FinalCut[2008]: <CFArray 0x13d9c36a0 [0x7fff702c8ee0]>{type = immutable, count = 1, values = (
Feb  4 15:22:33 Video-Computer [0x0-0xf50f5].com.apple.FinalCut[2008]:      0 : <CFBasicHash 0x13d90a850 [0x7fff702c8ee0]>{type = mutable dict, count = 0,
Feb  4 15:22:33 Video-Computer [0x0-0xf50f5].com.apple.FinalCut[2008]: entries =>
Feb  4 15:22:33 Video-Computer [0x0-0xf50f5].com.apple.FinalCut[2008]: }
Feb  4 15:22:33 Video-Computer [0x0-0xf50f5].com.apple.FinalCut[2008]: )}
Feb  4 15:22:35 Video-Computer [0x0-0xf50f5].com.apple.FinalCut[2008]: <CFArray 0x147b06fb0 [0x7fff702c8ee0]>{type = immutable, count = 1, values = (
Feb  4 15:22:35 Video-Computer [0x0-0xf50f5].com.apple.FinalCut[2008]:      0 : <CFBasicHash 0x13bcd3070 [0x7fff702c8ee0]>{type = mutable dict, count = 0,
Feb  4 15:22:35 Video-Computer [0x0-0xf50f5].com.apple.FinalCut[2008]: entries =>
Feb  4 15:22:35 Video-Computer [0x0-0xf50f5].com.apple.FinalCut[2008]: }
Feb  4 15:22:35 Video-Computer [0x0-0xf50f5].com.apple.FinalCut[2008]: )}
Thanks,
Michael

Similar Messages

  • Safari causes system freeze during page load

    Description:
    I've been trying to figure this one out for a while now (about 2 weeks), without any luck. I've tried reading a couple of threads describing similar problems, but it looks like I've got something else going on here seeing as it affect the entire system. I appreciate any suggestion!
    When a window in Safari is open and you're loading a page, it sometimes (almost always) causes a system freeze. Any action performed on any input device within OSX while a page is loading gets delayed by 5-20 seconds. Anything from right-clicking, to opening a new tab in Safari, to navigating to a new folder in Finder.... literally anything. The actual loading of the page is also affected by this. So when I click a link, the page becomes white and the system stalls. After X seconds, the system resumes and the page is displayed fully loaded. Once the page is loaded, everything is back to normal. I can just leave the Safari-window open without anything happening. It's just during the loading of a page.
    Using the mouse to move and switch between open windows are the only actions I seem to be able to perform during the system freeze.
    When it doesn't cause a system-wide freeze, it will still take forever for any page to load. Which isn't a problem in any other browser and I've never had any speed issues in general on any device.
    What I know for sure is that I can solve the problem by closing all open Safari-tabs and windows or closing the app completely, and use Chrome instead. But I do like Safari, so I hope there's another way to fix this.
    I should also note that I've made no changes to the system for many weeks now, other than installing whatever updates might have been available on the App Store.
    What I've tried within Safari:
    - program restart
    - reset settings (every option checked)
    - disable and remove extensions (only had one installed, LiveReload for Adobe Brackets)
    - empty cache
    - delete cookies
    What I've tried within OSX:
    - system restart
    - complete OSX-recovery
    - activity monitor (CPU, HDD and RAM always within normal values during all of this)
    - checked HDD (successfull)
    - checked internet-connection (got 50Mbit/s connection, no speed issues, checked on multiple devices)
    - tried other browsers (Chrome (OSX) and IE (Win 7, Parallels) both run smoothly)
    - turned off IPv6 in terminal (based on a suggestion here at the forums)
    - disabled iCloud-sync
    - disabled Dropbox
    - probably a couple of other things i can't remember right now

    So... I finally fixed it.
    In addition to the things I mentioned I tried, I also checked if it could be malware-related. It wasnt. I then checked if it was just affecting my user-account or OSX globally. I created a new account and Safari ran perfectly. I therefore assumed it had to be something in my library-folder.
    I deleted just about any mention of Safari in the Library-folder (the visible one) and just to be absolutely sure, I deleted the Contents-folder inside Safari.app in the Applications-folder. I then downloaded and installed Safari 7.0.3. Everything runs smooth now.

  • IDVD encoding causes system failure during burn process

    I have iDVD 5 on my work computer (dual 2.7Ghz G5 / 2.5 G RAM), and have burned successfully before my current project.
    My current project has a 28:45 movie and I have tried two different themes with different combinations of drop zones (one with the movie as the drop zone and one with stills only) and everything previews okay, but when I start the burn process it will get to a certain point in the encoding and then the whole system crashes. I come back to check on the process, and my screen is filled with black squares with error info in it... (looks like a DOS screen or something) and it says something about system failure and that I need to restart my computer.
    I'm so stubborn that I keep trying different combinations of possibilities but I'm having no luck. The movie that it's hangin up on was captured in Final Cut Pro from a VHS, edited in Final Cut to trim the excess black, and exported as a Final Cut Movie that I imported into iDVD.
    As I said above, I have burned successfully on this computer and this iDVD, so the fact that this one project refuses to burn is perplexing.
    any thoughts?

    A gap in video would be a space between one clip and another. This is a problem when you are editing your footage, not capturing it. In other words, it is a user introduced problem.
    In FCP when you say "Ignore Timecode Breaks" it just means to continue capturing video even if there is a timecode break. If you do not select this option, FCP would immediately stop catpturing whenever it hit a timecode break. A timecode break is not the same thing as a gap you create during editing. A timecode break could be as simple as rewinding your camera footage and then recording over it... the timecode now has a break because it is not continuous timecode, it jumps from one timecode to another.
    Depending on what device you are capturing from, your audio may come in a few frames before or after the video. This would be especially true for a non-controllable device. It is a simple fix to adjust this as you would have noticed any sync issues right in the timeline during playback.
    A system reboot in the middle of encoding is a serious crash... I doubt if it is the footage per se that is causing this to happen. Footage has been known to force an application to abort a process (or stay in an infinite loop), but an actual system shutdown would be extremely rare.
    Consider recapturing the footage into a new FCP project and then creating a new iDVD project for it, this will eliminate either a corrupted FCP file or an iDVD project from the equation. Also, are you burning directly to disc or are you preparing a disc image? I'd go with the disc image approach because you can test your final build that way.

  • System beeps at startup

    Starting today, my system beeps when I start up.  When I power on, I hear approximately 3-4 faint beeps.  It stops after that.  It sounds like it's a system warning beep from the K8N.  The beeping stops after those first 3 or 4 beeps and the system boots up fine.  I'm confused and have no idea what this beep signifies.

    AMI Beep Code
    Beep Code         Description
    1 short         DRAMS refresh failure
    2 short         Parity circuit failure
    3 short         Base 64k RAM failure
    4 short         System timer failure
    5 short         Process failure
    6 short         Keyboard controller Gate A20 error
    7 short         Virtual mode exception error
    8 short         Display memory Read/Write test failure
    9 short         ROM BIOS checksum failure
    10 short         CMOS shutdown Read/Write error
    11 short         Cache Memory error
    1 long, 3 short         Conventional/Extended memory failure
    1 long, 8 short         Display/Retrace test failed
    I have 3 short beeps.  What the heck is Base 64k RAM failure?? I'm going to email MSI for tech support here, but as we know, they don't have a perfect record in answering tech emails.  So, in the meantime, I'd really appreciate everyones' help.
    Thank you.

  • OS has been slow on program startup, freezes for up to 2 minutes

    Hey everyone,
    Have fixed many PCs in my day because they broke and I haven't had much experience on Macs because they just never seem to break and I am just not start where to begin troubleshooting. I have a refurbished (from Mac) Macbook Pro which I purchase about a year ago. 2.54 Ghz core 2 duo, 4 gb ram, running OS X 10.5.8 it recently has been freezing for long periods of time while starting programs.
    When I got the computer it was running great, now it lags at certain times such as program startups and waking up from sleep. The freezes can range from 30 seconds to 3 minutes of idling where I can move the mouse around but the pinwheel spins and I can hear the hard drive working. It almost seems like some memory issue as if the computer is having a hard time getting going. It reminds me of windows computers that were infected with viruses that needed to be cleaned up. Sometimes it will run okay but other times if I open a program it will stall and take a while to open, most of the times when the program is finally open it runs smoothly.
    The hard drive is 232 gb. I  thought it might have been caused by space issues but when I freed up to 50 gb I still noticed the problem occurring. Right now I have 9 GB free - I know its low but I still don't believe it should be hanging for 3 minutes when I start some programs.
    I am new to Macs but have troubleshooted many Windows computers and my question is where do I look from here? Is there a place that logs the computer activity during the slowdowns so that I can pinpont the issue?
    Thanks for the help!
    Here is a screenshot of activity monitor while copying a file over to an external hard drive that I have: http://i.imgur.com/4LXBN.png
    Greased Lightbox
    →←+-↻
    Loading image
    Click anywhere to cancel
    Image unavailable
    Screenshot of system memory: http://i.imgur.com/YYKNf.png

    I'm not sure what you mean by "crashing" but this is what has happened to me and a bunch of other users:  When working with plugins that have visual analysis and with these plugins open Logic Pro lags very badly.  You can't stop it.  You can't make adjustments.  You just wait for the lag to catch up, which sometimes takes up to two minutes, depending on the stress you are putting on the system.  If this is the case with you as well, join the club.  It's a problem that has been well-documented on here.   It occurs for me when I open channel eq and have the visual analyzer button engaged.  As soon as I open two instances I will get this lag. 
    I had a rather depressing conversation with a fellow at the top of tech support today, who still hadn't heard of this problem.  All I can say is, CALL APPLE TECH SUPPORT!!!  Make sure they know this is a problem you are having!  Otherwise it doesn't get placed into the heirarchy of bugs that need fixing.  That's exactly what I was told today and it made me very upset because I have called support, and I have seen that many other folks have done the same.  Apple is so large a company they just don't take things seriously enough to need to fix them until they receive calls.  So please, call if you can!  Ask to be put on with second tier support.

  • After upgrading HANA from rev. 69.1 to rev.72 OOM errors occure during HDB startup

    Hello,
    we upgraded our HANA scale out system from rev. 69.1 to rev. 72.
    ~4 hours after the upgrade our HDB crashed with OOM errors on  the master indexserver.
    Since than we are trying to start it back up and face OOM errors during startup in the index rebuild phase:
    The errors clearly state the HANA runs out of allocatable memory for Pool/IndexRebuildAllocator during startup.
    It looks like HANA requires more memory during this phase compared to rev. 69.1
    Our Master node has 512GB of physical memory and the Allocation limit is set to 95% of this (default).
    Here is what we read from our logs during startup:
    [3331]{-1}[-1/-1] 2014-03-24 01:35:36.735498 i Service_Startup  ptime_master_start.cc(00719) : Rebuilding system indexes.
    [3331]{-1}[-1/-1] 2014-03-24 01:35:37.236971 i Service_Startup  ptime_master_start.cc(00733) : Rebuilding system indexes done.
    [3331]{-1}[-1/-1] 2014-03-24 01:35:37.237002 i Service_Startup  ptime_master_start.cc(00735) : Rebuilding indexes.
    [3331]{-1}[-1/-1] 2014-03-24 01:35:37.244660 i Service_Startup  IndexManager_rebuild.cc(00478) : Number of indexes: 2837
    [3331]{-1}[-1/-1] 2014-03-24 01:35:37.245606 i Service_Startup  IndexManager_rebuild.cc(00580) : Number of JobEx indexes: 2798
    [3367]{-1}[9/-1] 2014-03-24 01:36:33.729391 w ResMan           ResourceContainer.cpp(01300) : Information about shrink at 24.03.2014 01:28:46 000 Mon:
    Reason for shrink: Precharge for big block allocation. User size:  6269307200
    ShrinkCaller
    [4123]{-1}[9/-1] 2014-03-24 01:36:42.465154 w Memory           PoolAllocator.cpp(01060) : Out of memory for Pool/IndexRebuildAllocator, size 48B, flags 0x0
    [4123]{-1}[9/-1] 2014-03-24 01:36:42.465168 e Memory           ReportMemoryProblems.cpp(00733) : OUT OF MEMORY occurred.
    [3538]{-1}[9/-1] 2014-03-24 01:36:42.465164 w Memory           PoolAllocator.cpp(01060) : Out of memory for Pool/IndexRebuildAllocator, size 48B, flags 0x0
    [3538]{-1}[9/-1] 2014-03-24 01:36:42.465177 e Memory           ReportMemoryProblems.cpp(00733) : OUT OF MEMORY occurred.
    [4123]{-1}[9/-1] 2014-03-24 01:36:42.465168 e Memory           ReportMemoryProblems.cpp(00733) : Failed to allocate 48 byte.
    [3538]{-1}[9/-1] 2014-03-24 01:36:42.465177 e Memory           ReportMemoryProblems.cpp(00733) : Failed to allocate 48 byte.
    [4123]{-1}[9/-1] 2014-03-24 01:36:42.465168 e Memory           ReportMemoryProblems.cpp(00733) : Current callstack:
    [3538]{-1}[9/-1] 2014-03-24 01:36:42.465177 e Memory           ReportMemoryProblems.cpp(00733) : Current callstack:
    [3562]{-1}[9/-1] 2014-03-24 01:36:42.465245 w Memory           PoolAllocator.cpp(01060) : Out of memory for Pool/IndexRebuildAllocator, size 48B, flags 0x0
    [3562]{-1}[9/-1] 2014-03-24 01:36:42.465256 e Memory           ReportMemoryProblems.cpp(00733) : OUT OF MEMORY occurred.
    GLOBAL_ALLOCATION_LIMIT (GAL) = 520645177866b (484.88gb), SHARED_MEMORY = 243742983024b (227gb), CODE_SIZE = 6919073792b (6.44gb)
    PID=2987 (hdbnameserver), PAL=487793667686, AB=1596952576, UA=0, U=1415644701, FSL=0
    PID=3196 (hdbcompileserve), PAL=487793667686, AB=447041536, UA=0, U=356200477, FSL=0
    PID=3193 (hdbpreprocessor), PAL=487793667686, AB=416477184, UA=0, U=292814063, FSL=0
    PID=3254 (hdbstatisticsse), PAL=54199296409, AB=1040187392, UA=0, U=862081043, FSL=0
    PID=3257 (hdbxsengine), PAL=487793667686, AB=1100451840, UA=0, U=907234077, FSL=0
    PID=3251 (hdbindexserver), PAL=487793667686, AB=265382010522, UA=0, U=218447843045, FSL=0
    Total allocated memory= 520645177866b (484.88gb)
    Total used memory     = 472943874222b (440.46gb)
    Sum AB                = 269983121050
    Sum Used              = 222281817406
    Heap memory fragmentation: 9
    Top allocators (ordered descending by inclusive_size_in_use).
    1: /                                                                       218448756093b (203.44gb)
    2: Pool                                                                    214254480696b (199.53gb)
    3: Pool/IndexRebuildAllocator                                              196297409104b (182.81gb)
    4: Pool/PersistenceManager                                                 9920106968b (9.23gb)
    5: Pool/PersistenceManager/PersistentSpace(0)                              9779577952b (9.10gb)
    6: Pool/PersistenceManager/PersistentSpace(0)/RowStoreLPA                  9473884512b (8.82gb)
    7: Pool/ResourceContainer                                                  2852314824b (2.65gb)
    8: AllocateOnlyAllocator-unlimited                                         2832931544b (2.63gb)
    9: Pool/malloc                                                             2660566632b (2.47gb)
    10: Pool/malloc/libhdbrskernel.so                                           2467813288b (2.29gb)
    11: Pool/RowEngine                                                          2284285840b (2.12gb)
    12: AllocateOnlyAllocator-unlimited/FLA-UL<3145728,1>/MemoryMapLevel2Blocks 2135949312b (1.98gb)
    13: AllocateOnlyAllocator-unlimited/FLA-UL<3145728,1>                       2135949312b (1.98gb)
    14: Pool/RowEngine/CpbTree                                                  1417842512b (1.32gb)
    15: AllocateOnlyAllocator-limited                                           1184520640b (1.10gb)
    16: AllocateOnlyAllocator-limited/ResourceHeader                            1184517680b (1.10gb)
    17: Pool/RowEngine/LockTable                                                536881408b (512mb)
    18: AllocateOnlyAllocator-unlimited/FLA-UL<120,256>/BigBlockInfoAllocator   360752520b (344.04mb)
    19: AllocateOnlyAllocator-unlimited/FLA-UL<120,256>                         360752520b (344.04mb)
    20: Pool/PersistenceManager/PersistentSpace(0)/RowStoreConverter            239921680b (228.80mb)
    Top allocators (ordered descending by exclusive_size_in_use).
    1: Pool/IndexRebuildAllocator                                               196297409104b (182.81gb)
    2: Pool/PersistenceManager/PersistentSpace(0)/RowStoreLPA                   9473884512b (8.82gb)
    3: Pool/ResourceContainer                                                   2852314824b (2.65gb)
    4: Pool/malloc/libhdbrskernel.so                                            2467813288b (2.29gb)
    5: AllocateOnlyAllocator-unlimited/FLA-UL<3145728,1>/MemoryMapLevel2Blocks  2135949312b (1.98gb)
    6: Pool/RowEngine/CpbTree                                                   1417842512b (1.32gb)
    7: AllocateOnlyAllocator-limited/ResourceHeader                             1184517680b (1.10gb)
    8: Pool/RowEngine/LockTable                                                 536881408b (512mb)
    9: AllocateOnlyAllocator-unlimited/FLA-UL<120,256>/BigBlockInfoAllocator    360752520b (344.04mb)
    10: Pool/PersistenceManager/PersistentSpace(0)/RowStoreConverter/ConvPage    239075328b (228mb)
    11: Pool/RowEngine/Internal                                                  205837824b (196.30mb)
    12: StackAllocator                                                           176672768b (168.48mb)
    13: AllocateOnlyAllocator-unlimited/FLA-UL<48,128>/FreeBigBlockInfoAllocator 144301008b (137.61mb)
    14: Pool/RowEngine/Transaction                                               103391528b (98.60mb)
    15: Pool/malloc/libhdbexpression.so                                          90507984b (86.31mb)
    16: Pool/malloc/libhdbbasement.so                                            90380472b (86.19mb)
    17: AllocateOnlyAllocator-unlimited/ReserveForUndoAndCleanupExec             84029440b (80.13mb)
    18: AllocateOnlyAllocator-unlimited/ReserveForOnlineCleanup                  84029440b (80.13mb)
    19: Pool/Statistics                                                          83825720b (79.94mb)
    20: Pool/PersistenceManager/ContainerNameDirectory                           59182968b (56.44mb)
    In order to fix this bottleneck, we first need to get HDB started, but how?
    Is there a way to aviod that row store tables are being loaded during startup? (this would allow enough memory for the index rebuild)
    Is there a way to skip the index rebuild during startup?
    Can we increase the allocation limit to more than 95% of the physical memory? (e.g. we could configure swap space to be utilized, just to get over the edge of this during the startup in order to bring our HDB back up and work on reducing the memory requirement on the master index server)
    Kind Regards
    Florian Wittmann
    ps. we also have a call with SAP.

    To update everyone who runs into the same issue during startup of HANA, here is the solution that has worked for us. But I highly recommend to have such an approach reviewed by SAP service before I you perform this!
    For us the only chance left to bring HANA up was to configure swap space on the master node. (We configured 20GB...we could not know how much memory it would need during the startup to get passed the index rebuild, so that was just a guess that turned out to be just enough for us to get passed that memory peak during the startup phase).
    After that we adjusted the custom parameter file /sapmnt/<SID>/global/hdb/custom/config/global.ini
    and maintained a global_allocation_limit that we manually calculated as (512GB physical mem. + 20GB swap mem.)/0.95
    e.g.
    [memorymanager]
    global_allocation_limit=517530
    Than we started HANA up again and made use of the page file during the index rebuild in the startup phase...of course this dramatically slows down the startup...well you do an index reorg using swap space...but after 1hour we got passed the index rebuild and memory utilization went down again. (With this error we learned that HANA has a significantly higher memory consumption during startup and the upgrade from SP 6 to SP 7 must have even increased this slightly, since we managed to startup our HANA db before upgrading without this issue, but it was not the root cause!)
    Now that we had HANA back up, we investigated memory consuming indices together with SAP, and with the help of below query, we identified row store table RSMONMESS to hold 25GB of 2ndary indices!
    select table_name, round((sum(index_size)) / 1024 / 1024, 2) as
    SIZE_IN_MB, count(*) as number_of_indexes from M_RS_INDEXES group by
    table_name order by SIZE_IN_MB desc
    Before droping 2ndary indices:
    TABLE_NAME;SIZE_IN_MB;NUMBER_OF_INDEXES
    RSMONMESS;30.883,8;6
    drop index SAP<SID>."RSMONMESS~AXX";
    drop index SAP<SID>."RSMONMESS~TIM";
    drop index SAP<SID>."RSMONMESS~AU1";
    drop index SAP<SID>."RSMONMESS~RID";
    drop index SAP<SID>."RSMONMESS~AXY";
    After drop:
    TABLE_NAME;SIZE_IN_MB;NUMBER_OF_INDEXES
    RSMONMESS;5.708,43;1
    With that change we reset our custom parameter on global_allocation_limit and went back to the default (95% of main physical mem.), removed the swap file and started up HANA again...and during this startup we managed to stay in our global_allocation_limit and bring HANA back up again!

  • Power Mac G3-Beige: Continue to beep during start up

    Why do my system beeps uncontrollably during start up? While booting it get stuck after desktop appears. I notice "add this to start up item" appear on window bar. This goes on for aprox. 10.minutes. HELP!
    Power Mac G3   Mac OS 9.2.x   Power PC / Beige
    Power Mac G3   Mac OS 9.2.x   Power PC / Beige

    Welcome to the forum.
    Was your Beige Mac booting up OK previously? When
    did this beeping and freezing start? Did you add,
    delete, or change anything, hardware or software
    around the time that the problem started?
    With the information you supplied so far, just a shot
    in the dark but, it seems like some required startup
    extension has been deleted or made inactive.
    Give us more information and we may be able to help
    you more.
    Carl B.
    If I can rember correctly, i beleive it started after completing a disk first aid on the system. I think I rember seeing a file named ___sprocket**###!!? I wish I could be of more discriptive.

  • System error in program SAPLRSOA

    Hello All,
    I tried to execute a query and it resulted in the following error:
    System error in program SAPLRSOA and form FUNC RSOA_VCUBE_READ_REMOTE_DATA[6] (see long text).
    In BI, the data is readfrom the remote cubes. And there seems to be error in the function used to read the data from these remote cubes.
    Further on seeing the long text, I got the follwing message:
    Diagnosis
    This internal error is an intended termination resulting from a program state that is not permitted.
    Procedure
    Analyze the situation and inform SAP.
    If the termination occurred when you executed a query or Web template, or during interaction in the planning modeler, and if you can reproduce this termination, record a trace (transaction RSTT).
    For more information about recording a trace, see the documentation for the trace tool environment as well as SAP Note 899572.
      Notification Number BRAIN 299
    Can someone pls help me on this soon?

    Hi,
    Pls chk this note;
    Note 983605 - Query on RemoteProvider: No data or termination
    Symptom
    A query on a VirtualProvider (SAP RemoteCube) or on a MultiProvider that contains a Virtual Provider terminates with an error message from the source system. Possible errors are:
    Unexpected error: reduce_field_list
    Or: The query does not return any data.
    Or: If you carry out the query on a MutiProvider with virtual PartProvider, it may return incorrect data, because the part from the RemoteCube is missing.
    Other terms
    RSOA_VCUBE_READ_REMOTE_DATA, PERFORM transform_to_ts, Remote InfoCube, InfoProvider, Cube, data target, destination
    Reason and Prerequisites
    This problem is caused by a program error.
    The VirtualProvider (SAP RemoteCube) is connected with a DataSource via a (3.X) InfoSource.
    The navigation step of the query leads to a limitation (selection) on a characteristic that is filled with a constant in the transfer rule (between 3.X InfoSource and DataSource).
    Technical: Initial entry in field list.
    Solution
    BW 3.0B
               Import Support Package 33 for 3.0B (BW 3.0B Patch 33 or SAPKW30B33) into your BW system. The Support Package is available once Note 914950 "SAPBWNews BW 3.0B Support Package 33", which describes this Support Package in more detail, has been released for customers.
    BW 3.10 Content
               Import Support Package 27 for 3.10 (BW 3.10 Patch 27 or SAPKW31027) into your BW system. The Support Package is available once Note 935963 "SAPBWNews BW 3.1 Content Support Package 27", which describes this Support Package in more detail, has been released for customers.
    BW 3.50
               Import Support Package 19 for 3.5 (BW 3.50 Patch 19 or SAPKW35019) into your BW system. The Support Package is available once Note 928662 "SAPBWNews BW Support Package 19 NetWeaver'04 Stack 19", which describes this Support Package in more detail, has been released for customers.
    BW 7.0
               Import Support Package 10 for 7.0 (BW 7.0 Patch 10 or SAPKW70010) into your BW system. The Support Package is available once Note 914304 "SAPBWNews BW 7.0 Support Package 10", which describes this Support Package in more detail, has been released for customers.
    In urgent cases, you can implement the correction instructions.
    You must first implement Notes 932065, 935140, 948389, 964580 and 969846, which provide information about transaction SNOTE. Otherwise, problems and syntax errors may occur when you deimplement some notes.
    To provide information in advance, the notes mentioned above may already be available before the Support Package is released. In this case, the short text of the note still contains the words "Preliminary version"
    Hope this helps
    Regards
    CSM Reddy

  • Is there anyway to reset the GPIB driver during program execution?

    Is there anyway to reset the GPIB driver during program execution?

    The issue at hand is that a thread is executing a series of tests which may or may not be making GPIB calls at any given time. The thread may be killed at any time with the function CmtTerminateThreadPoolThread (due to the user pressing the stop button on the GUI). Cooperative thread termination is not an option since a test may cause the thread of execution to lock up the system. The problem is that there may be outstanding GPIB calls at the time that the thread is stopped. These calls time out and generate run-time errors usually via the GPIB function ibrd. The motivation is to completely stop the GPIB driver while the thread is being killed, after which it can be re-initialized. Ideally.

  • LENOVO G560, BEEP SOUND ON STARTUP & SOME NUMERIC KEYPAD BUTTONS NOT WORKING

    My g560 sounds continous beeps while starts ups, some numeric keys on right side not working like 2, 4, enter key, etc.
    some times the number 2 keys works automatically any time while working on WORD file or on run command.
     whts the problem,, plz advice.

    Hi abgautam00.
    Welcome to Lenovo Community Forums!
    If your system still boots to windows ok,
        I think it's a stuck key that's causing the beep
    Try Installing this Software test
    http://www.passmark.com/products/keytest.htm
    Run this app within Windows and without pressing any keys see if there is a stuck key as it will light up on this tool
    Let me know your findings
    Solid Cruver
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • After Effects can't continue: unexpected failure during application startup

    Im running 10.10, Mac OSX, it was running fine before a minor update came out, and now I can not open AE CS6. I have uninstalled, reinstalled it, installed the trial of CC 2014. No messages beside "After Effects can’t continue: unexpected failure during application startup" come up.
    System log:
    Jun 22 15:30:49 Users-iMac.local AdobeCrashDaemon[976]: WARNING: The Gestalt selector gestaltSystemVersion is returning 10.9.0 instead of 10.10.0. Use NSProcessInfo's operatingSystemVersion property to get correct system version number.
                Call location:
    Jun 22 15:30:49 Users-iMac.local AdobeCrashDaemon[976]: 0   CarbonCore                          0x00007fff82bb637d ___Gestalt_SystemVersion_block_invoke + 113
    Jun 22 15:30:49 Users-iMac.local AdobeCrashDaemon[976]: 1   libdispatch.dylib                   0x00007fff8bf70fa2 _dispatch_client_callout + 8
    Jun 22 15:30:49 Users-iMac.local AdobeCrashDaemon[976]: 2   libdispatch.dylib                   0x00007fff8bf70f00 dispatch_once_f + 79
    Jun 22 15:30:49 Users-iMac.local AdobeCrashDaemon[976]: 3   CarbonCore                          0x00007fff82b5e932 _Gestalt_SystemVersion + 987
    Jun 22 15:30:49 Users-iMac.local AdobeCrashDaemon[976]: 4   CarbonCore                          0x00007fff82b5e51f Gestalt + 144
    Jun 22 15:30:49 Users-iMac.local AdobeCrashDaemon[976]: 5   AdobeCrashDaemon                    0x0000000100002e69 -[MyDaemon GetOSVersionMajor] + 33
    Jun 22 15:30:49 Users-iMac.local AdobeCrashDaemon[976]: 6   AdobeCrashDaemon                    0x0000000100002d4a -[MyDaemon isRunningOnLeopard] + 25

    Well, looks like a bug in Yosemite. You might wanan read the pertinent announcements, anyway. At this point Adobe apps are not compatible with OSX 10.10.
    Mylenium

  • I have found an issue with MS13-098 which causes systems to be renamed to MINWINPC

    I have found an issue with MS13-098 which causes systems to be renamed to  MINWINPC.  The issue has been reported in Japanese by Microsoft. The translation is:
    Phenomenon
      In Windows Server 2008 or Windows Vista, you might not be able to log an error appears to apply the new update the following programs, if you try to log on after the restart. •  MS12-024 (KB2653956)
    •  MS13-098 (KB2893294)
     Error message displayed is as follows.
     Incorrect password or user name
      Back to the top | feedback
    Collapse image  Cause
      This behavior occurs when you apply the update KB2653956 in the state of some data is damaged following registry key, or does not exist.
     HKEY_LOCAL_MACHINE \ SCHEMA \ wcm :/ / Microsoft-Windows-CoreOS? ...
     Any string will contain the part of the ... Note:.  Also, make sure to load the SystemRoot% \ system32 \ SMI \ Store \ Machine \ SCHEMA.DAT file% if the HKEY_LOCAL_MACHINE \ SCHEMA does not exist.
     When you apply the update of KB2653956 in the state where the registry key is not present, the value of the following registry is changed to MINWINPC, logon will not be able to.
    •  HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Control \ ComputerName \ ActiveComputerName
    •  HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Control \ ComputerName \ ComputerName
      Back to the top | feedback
    Collapse image  Solution
      If this occurs, change to the correct computer name the value of the ComputerName registry and ActiveComputerName start in safe mode, has been mentioned above, and then restart.
      Back to the top | feedback
    Collapse image  Workaround
      To prevent this phenomenon occurs, you download and run the System Update Readiness Tool from the following KB.
     http://support.microsoft.com/kb/947821
     By performing the system update Preparation tool registry that is described in Section Symptoms are repaired.
     If the repair is made, starting with log Recreated missing key as the following WinDir% \ Logs \ CBS \ CheckSUR.log file% is recorded.
     Recreated missing key:? Wcm :/ / Microsoft-Windows-CoreOS ... \ metadata \ elements \ ComputerName
     In addition, regardless of the presence or absence of entry damaged Microsoft-Windows-CoreOS, you can set the value of the ComputerName key in this tool.  For this reason, the following log is recorded in the CheckSUR.log.
     Recreated value: @ _type.
     Recreated value: @ dataOnly.
     Recreated value: @ default.
     Recreated value: @ description.
     Recreated value: @ displayName.
     Recreated value: @ handler.
     Recreated value: @ legacyName.
     Recreated value: @ legacyType.
     Recreated value: @ migrate.
     Recreated value: @ scope.
     Recreated value: @ xsd: type.
      Back to the top | feedback
     Note: This is a "FAST PUBLISH" article created directly from within the Microsoft support organization.  It contains information in response to emerging issues are listed.  As a result of the speed of information provided may be
    typographical errors are included in the article, you might be revised at any time without prior notice.  For other considerations, and use conditions
     Please refer to.
      Back to the top | feedback
    Collapse image  Property
      December 11, 2013 - Revision: - Last Review: 2901584: 4.0 Document Number
      This document that was written about products for.
    •  Windows Vista Business
    •  Windows Vista Business 64-bit edition
    •  Windows Vista Enterprise
    •  Windows Vista Enterprise 64-bit edition
    •  Windows Vista Home Basic
    •  Windows Vista Home Basic 64-bit edition
    •  Windows Vista Home Premium
    •  Windows Vista Home Premium 64-bit edition
    •  Windows Vista Starter
    •  Windows Vista Ultimate
    •  Windows Vista Ultimate 64-bit edition
    •  Windows Server 2008 Datacenter
    •  Windows Server 2008 Datacenter without Hyper-V
    •  Windows Server 2008 Enterprise
    •  Windows Server 2008 Enterprise without Hyper-V
    •  Windows Server 2008 for Itanium-Based Systems
    •  Windows Server 2008 Foundation
    •  Windows Server 2008 Standard
    •  Windows Server 2008 Standard without Hyper-V
    •  Windows Web Server 2008
    •  Windows HPC Server 2008
    •  Windows Essential Business Server 2008
    We are having the issue on hundreds of systems and I am rolling out the readiness tool mentioned above to prevent other systems from being affected.  In the mean time I have stopped deploying MS13-098 and am hoping Microsoft will go ahead and let all
    of their customers know about the problem instead of just one country.  Hopefully the original bulletin will be updated with this known issue.

    PPoj,
    Apple has offered replacement or pro-rated refunds in the US as a settlement of a class action lawsuit, not because of pride in their design-centric approach to their products. If you seek a similar replacement/refund program in India, then the odds are pretty good that you’d need a similar legal approach with which to convince Apple to offer a similar program there. If you’re unwilling to wait for such an event, then you can purchase a replacement power cable now, and hope for a pro-rated refund at some point in the future.

  • System failure, during call of function module RSWR_RFC_SERVICE_TEST

    Hi Team,
         I am working with BW and Portal Integration, with the Netweaver
    2004s SP 11 version. I have a issue when i run the RSPOR_SETUP program
    to test the configuration.
    The error is on status 5 and 12, i get the following error:
    System failure, during call of function module RSWR_RFC_SERVICE_TEST,
    and when i enter at the dev_jrfc.trc log file, i have the following
    error:
    Exception thrown [Tue Jul 10 16:12:16,687]:Exception thrown by
    application running in JCo Server
    java.lang.RuntimeException: call FM RSWR_RFC_SERVICE_TEST to ProgId
    smxpedvc_PORTAL_EPD on host smxpedvc.grupoempresarialangeles.com.mx
    with SSO not authorized: No login module succeeded.
            at
    com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest
    (RFCDefaultRequestHandler.java:79)
            at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest
    (RFCJCOServer.java:156)
            at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java:7785)
            at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest
    (MiddlewareJRfc.java:2405)
            at com.sap.mw.jco.MiddlewareJRfc$Server.listen
    (MiddlewareJRfc.java:1728)
            at com.sap.mw.jco.JCO$Server.listen(JCO.java:8145)
            at com.sap.mw.jco.JCO$Server.work(JCO.java:8265)
            at com.sap.mw.jco.JCO$Server.loop(JCO.java:8212)
            at com.sap.mw.jco.JCO$Server.run(JCO.java:8128)
            at com.sap.engine.core.thread.impl3.ActionObject.run
    (ActionObject.java:37)
            at java.security.AccessController.doPrivileged(Native Method)
            at com.sap.engine.core.thread.impl3.SingleThread.execute
    (SingleThread.java:100)
            at com.sap.engine.core.thread.impl3.SingleThread.run
    (SingleThread.java:170)
    Could you help me to solve this issue.
    Thanks so much.

    Have you checked the user that is used to connect from J2EE back to ABAP?
    I had a similar problem, went into the Visual Administrator and found the incorrect password (or possibly outdated password) was being used to communicate back to ABAP, and updating that sorted out my problem.
    Hope this helps.
    Cheers,
    Andrew

  • Abort System Error in Program SAPLRRV and for RRSV_CHAVL_TO_VALUE_CONVERT

    Hello SDN
    While refreshing a query in a Workbook, I have received this error message and getting disconnecting form the BW server.
    "Abort System Error in Program SAPLRRV and for RRSV_CHAVL_TO_VALUE_CONVERT"
    Does anyone has any idea? It is happening in Production and need to fix it as soon as possible.
    Appreciate any help and points will be assigned for useful information.
    Thanks
    kumar

    Hi Dinesh
    It is stopping at the BREAK-POINT in Function LRRMSU13(RRMS_X_MESSAGE)
    variable_screen=X&template_id=0QUERY_TEMPLATE
    In the messages , For generation, it display:
    &CAUSE&
    The query contains selection elements with "Constant Selection". Such a
    query cannot be run in the read mode 'Read Everything at Once'.
    &SYSTEM_RESPONSE&
    The read mode is automatically converted.
    &SYS_ADMIN&
    In the Variables, I see
    &CAUSE&
    Variable <(>&<)>V1& is used in the query in such a way, that an
    optional entry is not possible.
    For example, you might be using an "Exclude", or the variable might be
    connected using OR to additional selections for <(>&<)>V2& in the
    global filter, but is still displayed in the columns selections.
    It is also not possible to use an optional parameter variable to fill
    an interval selection in either the from-field or the to-field.
    &SYSTEM_RESPONSE&
    &WHAT_TO_DO&
    If you are able to accept the mandatory entry, you need not do
    anything. Otherwise you must work with several variables in the query.
    You can use an optional interval variable to do this.
    &SYS_ADMIN&
    For Key Figs :
    &CAUSE&
    Quantities are multiplied with values for the key figure &V2& (&V1&).
    This is not sensible.
    A basic key figure was probably defined that contain a price. Only
    addable amounts should be written on the database. Ratios and prices
    are calculated as key figures. Therefore, the system maintains the
    correct sequence, meaning summing takes place on every place and then
    the quotient is formed.
    If a 'price amount' is saved as a basic key figure after all then the
    'non-aggregated indicator' can be undone using 'Change key figure'.
    Therefore, the system carries out the multiplication (or division)
    before the summing. The key figure is then assigned to the group 'Other
    columns'.
    &WHAT_TO_DO&
    Please check the definition of the key figure &V2& (&V1&).
    <DS:TRAN.KDNN>Check or change key figure &V1&</>
    Can you please let me know how to fix this issue?
    Thanks
    Kuamr

  • "F11 System Recovery" during boot does not work after Cloning hard drive.

    Problem: “F11 System Recovery” during boot does not work after Cloning hard drive.
    HP Envy m6-1125dx UEFI Notebook Computer with GPT hard drive.
    Original Seagate Hard Disk GPT 700GB with Window 8.0_64 upgraded to Windows 8.1_64
    Startup Menu (F11 System Menu works properly) only on original hard drive.
    Following obtained from Disk Management & diskpart in Command Prompt.
                                     GPT Disk <700GB>
    Partition 1 WINRE NTFS Primary 235MB/400MB [Recovery]
    Partition 2 EFI System FAT32 (LBA) Primary 108MB/260MB [System]
    Partition 3 (NONE) Unformatted Primary 128MB/128MB [Reserve]
    Partition 4 Main NTFS Primary 90GB/195GB [Primary “C”]
    Partition 5 (NONE) NTFS Primary 372MB/450MB [Recovery]
    Partition 6 Data NTFS Primary 7GB/475GB [Primary “E”]
    Partition 7 NTFS Primary 26MB/350MB [Recovery]
    Partition 8 Recovery NTFS Primary 24GB/26GB [Recovery “D”]
    I have Cloned the original hard drive to a new HGST 1TB Hard Drive using four different methods (sector by sector):
    Acronis True Image 2015
    Acronis Backup for PC
    AOMEI Backupper Professional
    Macrium Reflect
    Each time the cloning process completes successfully and has the same original partition arrangement. The computer works properly except when trying to use the “F11 System Menu” key during boot. It gives the following error message:
    “Recovery
    Your PC needs to be repaired
    A required device isn’t connected or can’t be accessed.
    Error code: 0xc0000225
    You need to use the recovery tools on your installation media. If you don’t have any installation media (like a disc or USB device), contact your system administrator or PC manufacturer. “
    Any suggestions why the F11 System Recovery does not work during boot and how to fix the problem would be appreciated. I have does various disk checking and file checking on both the original and new hard drive with no errors.
    Thank you in advanced.

    Hi,
    How did you clone the HDD ? One-for-one or different method ?
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Maybe you are looking for

  • Error message on ejecting USB device even when ejecting properly

    I always click on the eject symbol in Finder before removing a usb device but I usually still get the message that the device was not removed correctly and damage may occur.  I have also gotten the message when using Eject from the Menu.  Anyone else

  • Business Functions concept in JD Edwards.

    Can u please explain me the Business Functions concept in JD Edwards. Thank you..

  • String Character Selection

    I just want to know if anyone knows the code so I can select the first character in a string and the last character in the string so that I can do the following function : First("ABC") ^ Last("ABC") = Answer Tks for any help

  • CS4 in OS 10.7

    Does CS 4 work in OS 10.7?

  • URGENT! Stolen tablet and more

    i have a samsung galaxy tab 2 and i put it in a bag with clothes and stuff and forgot to take it inside. is it possible to see at what locations my skype account has been used? because my friends saw that he was using it on a mobile device and i thin