Feedback nodes in subvis with multiple instances

I have a subvi that implements a state machine. I am using a feedback node to pass the state from one iteration to the next. I would like to have multiple instances of this subvi, but the problem is that the feedback is shared between all instances so the states get messed up. I need each instance of the subvi to run independent of the other instances and that its feedback only feeds back from the previous itereation of that subvi instance. Is this possible or do I need to rename the subvis to make them different and independent?

You will need to make the subVI's reentrant in order for them to maintain there own dataspace.

Similar Messages

UCCE with multiple instance

Hi everyone,
I have a plan to install UCCE 8.0 with multiple instance in my lab environment.
I'm not sute that, do I have to use hosted model or use enterprise and just create multiple instance on it.
Actually, I want to implement multi-tenant , I'm not sure because I see that enterprise model also can add more than 1 instance.
And if I use one of this model, could anyone tell me that what server I have to separate.
Thanks in advance for your help.
Regards,
Tinnakorn

Hi Tinnakorn,
The Cisco Unified Contact Center Hosted (Unified CCH) solution is largely the same as Unified CCE, but it supports multi-tenant or shared servers to manage multiple customer instances. That is the reason you see the capability to add multiple instance, even in UCCE.
All Unified CCE systems are deployed as a single instance (using the same instance name and number in setup) across all the Unified CCE components.
Please refer to UCCE SRND for more details.
Thanks,
Hitesh

Sql server with multiple instance

hi All,
i want to install sql server with two instance and i want to assign two separate is ips for both default instance and named instance and both should work like
two different server
note: If i logged with one ip(default instance) it should show its own databases not both or named instance databases
thanks
chintala

Hi chintala,
According to your description, if you want to assign the two different IP to stand for default instance
and named instance, I recommend you set up aliases on a SQL Server with multiple instances. For example, a physical server is named WinServer and 2 instances of SQL Server named WinServer and WinServer\instance1.
We need to add 1 IP addresse to the WinServer, there is one IP address already assigned to WinServer, 192.168.1.1, by adding one new IP's, 192.168.1.2 .
We need to move into DNS to configure our host names and aliases. The physical machine must be steup as a static IP in DNS. SQLAlias1, which point to the default instance on WinServer, will be setup as a DNS with an address of 192.168.1.1.
SQLAlias2, which will point to WinServer\Instance1, will be setup as a new Host (A) record in DNS with an address of 192.168.1.2.
When everything has been completed on the DNS side, you need to open up SQL Server Configuration Manager on WinServer and configure the protocols for each instance one at a time, restart the 3 SQL services.
For more information about how to set up aliases on a SQL Server with multiple instances, you can review the similar article.
http://kevine323.blogspot.com/2013/08/setting-up-aliases-on-sql-server-with.html
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

Problem with multiple instances of shared printers being installed on client computers when the spooler service is started

Hello,
We have Windows Server 2012 and clients using Windows 8. We've been having some printer problems for awhile now that I haven't been able to figure out for the life of me. The main problem is the fact that printers are installed on computers automatically
once the drivers are installed. The side-effect of multiple instances of each printer showing up is very annoying but I suspect fixing the initial problem will resolve this secondary one.
Here is the rundown:
We add the shared printers on logon to the clients using the GPO thus installing the drivers locally.
Whenever the spooler on the client is restarted with the drivers installed, all of the
shared printers that were previously installed get duplicated 5 more times (for a total of 6 instances of each shared printer) on the "Devices and Printers" page. This happens
all the time.
Removing them only fixes the issue temporarily, as soon as the spooler or computer is restarted, it seems these shared printers are somehow found on the network and the duplicates return.
Two of these printers are located on different clients, installed locally and shared while the other three are all installed on a server and shared through it. The issue is the same on all of them.
Cleaning the spooler completely (registry and files from C:\system32\spool) fixes the issue temporarily as well since, as soon as the drivers are reinstalled, the issue occurs again.
I've tried many things (disabling the GPO, editing the GPO, printer shares, registry, etc.) and searched tirelessly online for a cause and solution but I'm stumped. Does anybody have any idea what might be causing this problem and how to resolve it?
Thanks for your time!
Update #1: I just tried adding the NoNetCrawling option in the registry found in this article -> http://support.microsoft.com/kb/320138/en-us
I couldn't find the same for Windows 8 unfortunately. I also tried disabling network discovery and all other sharing options to no avail.
Update #2: I tried isolating the computer to a different subnet and restarting the spooler and, sure enough, the issue didn't occur. This proves that the issue is network share related. Also, as soon as I change the IP back to the regular domain
subnet one, the multiple printer instances re-appeared again.
Update #3: I just tried doing the same thing but on the server where the printers are installed and shared and, sure enough, despite being in a different subnet, the issue occurred. This leads me to believe there is a setting on this server at fault.
Question is, which one?

We have deployed a brand new Active Directory domain for a customer. ALL the servers without exception are Windows 2012 R2 and all clients are Windows 8.1 32bit VDI clients.
The issue that we have is around network printers.
We are deploying 4 printers from a Windows 2012 R2 Server via the print management/Deploy Printer and assigning that to a GPO. The printers are deployed to the Computers which should mean that the users get all 4 printers which they then should be allowed
to set their default and personal settings for that printer.
Our printers are deployed like this:
1. Created security group
2. Assigned VDI computers to the security group
3. Created GPO to reflect security group
4. Modify GPO to do security filtering based on computer group membership
5. Deployed 4 x printers through Print Management to the GPO on a per machine basis
However, on the users Devices and Printers screen we are not seeing the 4 printers. For some users
they see duplicates of all 4 printers so e.g they can have upwards of 8 or more. Other users have no printers displayed whatsoever. The next time they log off or restart they then have a different amount of printers displayed.
If they try and set the default then it will set and the next time they check the default may have moved to another printer even without logging off or back on.
Now, where this gets strange is within an application such as MS Word 2013 or Notepad if they use the file and print menu the printers will be listed, even if the user has no printers displayed in Devices and Printers. If the users selects a printer then they
can then print OK.
If we check HKCU\Printers||Connections then the CORRECT 4 printers are showing as to what is being deployed via the GPO so I know that the Windows 8.1 terminals are receiving the correct printers from the GPO.
To try and correct this over the course of the week we have deployed the printers via Group Policy Preferences to the user and then the PC to no avail. Currently we are using the Print management\Deployed Printers to deploy all 4 printers to the computer via
the Computer GPO.
I believe that this issue is related to the display somehow in Devices and Printers rather than a GPO or print server issue as we can see via the registry the clients are receiving the 4 correct mentioned printers as shown in the registry.
FYI: We only have around 30 users and all users are getting this problem. All users are receiving the same GPO's and have the same few apps installed, Office 2013, Adobe Reader etc.
What we want is for the computers to receive all 4 printers. All users should be able to use all 4 printers but the user should be able to select their particular default, depending where they are located or what they are printing that particular day. Their
particular default should persist after reboot. (We have 2 x Copiers and 2 x HP Laserjets) All users have redirected documents and desktop but the rest of the profile is on the VDI and persists after their reboot. The profile is not roaming as the user is
assigned a particular VDI.
After a week of scratching our heads with this we are open to suggestions and any would be appreciated.
We have tried following the issues on this thread to no avail either as they still return.

Creating a system in portal with multiple instances of backend sys

Hi all,
I am creating a system in the portal to my backend system(ECC6.0 with integrated ITS).I had a multiple instance backend system.The 2 instances are on two different boxes .The 2 instances have different ip addresses and hostnames.At a time only one instance will be active.We have a virtual ip and hostname for the Central instance.
In this case how to create the system so that the portal can switch from one instance to other while it is changed at the backend.
The major issue is how to fill the ITS properties while creating the system.Which hostname I have to give.
First instance hostname : eccprd1.XXXXXX.com
Second instance hostname :eccprd2.XXXXXX.com
Vitual hostname of central instance : eccsap.XXXXX.com
Any suggestions please.
Thanx and Regards,
Rajesh.A

Hi,
You can use the Dynamic Link Library SAPSSOEXT
Check out this link.
http://help.sap.com/saphelp_nw04/helpdata/en/12/9f244183bb8639e10000000a1550b0/content.htm
This should be applicable to any intended scenario.
Summary of Steps
1. Download file
2. create application as shown in sample file.
3. Import verify.der and install it in your local server , in the place specified in your application(.NET)
4. Run the planned scenario. The page(.NET Page) that will be initially accessed from SAP Portal should run your program or have that code , so that it can authenticate it without requesting userid and password.

Breadcrumbs not compatible with multiple instances of a topic in TOC; any solution?

My master page places a breadcrumb on every page in my project.
When I add a topic to the TOC in two or more places, and I compile the project and click the second or the nth instance of said topic in the TOC, the TOC always "jumps" to the first instance. I cannot look at the second or the nth instance of that topic in the TOC. (Of course, the text is identical in all n places, but I want to TOC to stay in the branch that the user expects to be.) BUT IF I TAKE THE BREADCRUMB OUT of the master page, the multiple instances of a topic behave perfectly. If I cannot use breadcrumbs, I'll have a huge problem. Can this be fixed?

Hi there
My guess is that the breadcrumbs are a red herring. Normally what causes the bizarre jumping around is the fact that the project has been configured to synchronize the TOC with the displayed topic.
One way past this is to never link more than once to a topic in the TOC. Of course, this causes an issue if you need more than one TOC entry point into the topic, no? So there are a couple of ways past it.
Use redirect pages that point to the desired topic. This way the Redirect page synchronizes with the TOC and you still see the topic.
Use an Inline Frame (IFRAME) to display the topic inside another page. Similar to the Redirect technique, but instead of loading another page, you present a page with a window that displays the topic.
Hopefully something here either helps directly or sparks a thought that does.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Configuring HFM 11.1.2 with sql2008 with multiple instances.

Hello All,
I have installed and configured HFM against an SQL 2008 server that has more than one DB instance. So, in order for me to successfully connect to the DB instance (say for example in a UDL), I first have to put the server name and the a “\instancename”. Unfortunately, it seems that the “\instancename” doesn’t seem to be saved in the conifg utility. If I rerun the config, only the server name shows in the config. I believe that this is causing me to not be able to register the HFM cluster with Shared Services. I look in the log files (specifically the HsvEventLog.log file) and I can see in there errors that state “SQL Server does not exist or access denied”. I know that I am a DBO on this DB and that this error is exactly the same error that I get in a UDL that does not have the “\instance” when I try to connect. When I go into Shared Services deployment artifacts for HFM, I can see that it is also not saving the “\instance” name in their either. I try to export/import with the “\instance” name added in and it fails upon import stating that the servername\instance host is unreachable or does not exist. So, all of this to ask is if there is a simple fix out there that already exist on how to configure HFM if the DB has multiple instances. Thank you in advance for any help or information that you are able to provide.

I think you would need to file a support call for us to take a look. Something is amiss here. You have 2 OHS running. Are they on 2 different boxes using the same shared service? How are these 2 OHS controlled? Do you have a load balancer in front of it?
Run the epmsys_registry.bat and look at the output. Search for CALC_LWA (LOGICAL_WEB_APP). Look at the children of that. How many CALC_WEBAPP do you see?
Based on that I can tell if it is a problem with the configuration.
In the meantime,
If you can get to the exploded directory of CALC manager, (On my Windows box it is C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\CalcMgr0\tmp\servers\CalcMgr0\tmp\_WL_user\CALC_11.1.2.0\qxf61x\war), edit CalcMgrConfig.properties under WEB-INF\conf
Add the following line to the end:
DATABASE_CACHE_CLUSTER=true
Now save the file and REPEAT the same for the other instances of CALC manager.
Now restart all CALC servers and see if the issue is resolved (just a temporary check to see if it working without any issues)
-Sree Menon

I'm having problems in a GOOP application with multiple instances of the same object running simultaneously.

I?ve written an application to control a system with multiple lamps. Each lamp in the system has its own power supply. Each lamp object contains a reference to its power supply. The application contains an array with the references to all the lamps in the system. Each lamp is in charge of monitoring itself and setting its power supply?s voltage according to the applications commands, therefore each lamp needs that its ?run me? method will run as long as the application is running i.e. the run method has to be reentrant. Because there are multiple lamps and because the ?run me? methods for each lamp run simultaneously, to over come this problem each lamp has a met
hod ?run? that calls ?run me? with ?RUN VI? invoke node with the ?Wait until done? set to false. When I run the application, it seems to work but if I check the AO there is no change in the output, and the lamps seem to be reading their input from the same channel. I can?t seem to find the problem, I think that the fact that the method is reentrant causes some sort of mix-up in the separate object references. Also because the method is reentrant I can?t debug it (with one lamp it seems to work ok). Does anyone have any idea what could be causing this problem.
P.S I'm having problems attaching my sample program to this message. You can contact me at [email protected] to recive the sample program I wrote.

Jean, Thanks for your answer, I've tried checking the invoke node that calls the "Run VI" method but it doesnt return an error any of the times its called even that the Vi that it called is still running. I also tried your solution of changing the object's "Run" method to a template but that doesnt work either. I can't seem to post the sample progam that demonstrates the problem, is it possible to send it to you by email, contact me at [email protected]
Attachments:
Sample_program.zip ‏926 KB

Recording with multiple instances of audition 3.01

Hello again.
Recently I upgraded a few machines from windows xp and audition 1.5 to Vista and audition 3.01
The most glaring difference now seems to be when our users have multiple audition windows open in 1.5 all recording from the same audio source.
The board ops might have 3 instances running so they can capture "highlights" and while they are editing a particular piece of audio the other instances are still recording.
I have the setting unchecked that releases the asio driver when the window is not in focus.
But when you start the record button on a second instance both recordings stop
Is there a way to set up version 3.01 to do this or will I have to go back to using v1.5?
Thanks

ATM I am using USB Creative Labs sound cards. These machines are used for simple "Highlight capture" for sporting events. No actual asio drivers just the standard WDM drivers that came with the sound device. (Creative Sound Blaster X-Fi Surround 5.1 Pro USB Sound Card | Creative Labs Online Store)
Eventually I will be upgrading these to http://www.bswusa.com/USB-Interfaces-Henry-Engineering-USB-Matchbox-II-P2601.aspx for direct interface into our mixing boards.

Server 2012 - Problem with multiple instances of RDS looking to the same license server. Server Pools requiring the wrong servers.

Hi All,
I have two domains, prod.local and test.local. On prod.local, I have a license server living on the connection broker. I have created a two way trust between the domains so that the RDS instance on test.local can use the license server on prod.local.
When I first setup the RDS instance on test.local and point it to use the license server on prod.local everything appears to work, all servers recognize the license server.
However when I log off and back on, and click the RDS dashboard in test.local, the Remote Desktop Services overview states I need to add every server from prod.local to the server pool. This is bothersome because the Remote Desktop Services on test.local
is still functioning, but I am no longer able to manage it. When I add the servers from prod.local to the server pool I am displayed the setup for prod.local instead of test.local
Is there a way around this? Can I use the same RDS license server key multiple times?
tldr: Using a different domain's license server causes my RDS instance in Server Manager to display the wrong RDS farm.

Hi Nathan,
Thank you for posting in Windows Server forum.
Please check the required ports must be opened on firewall.
- To issue RDS Per User CALs to users in other domains, there must be a two-way trust between the domains, and the license server must be a member of the Terminal Server License Servers group in those domains.
- To restrict the issuance of RDS CALs, you can add RDS Host Servers into Terminal Server Computers group on RDS Licensing servers.
- Configure RDS licensing server on all RDS Host Servers in each domain/forest. You can do it through RDS host configuration snap-in or through a group policy.
- Add administrators group of each domain/forest in the local administrators of RDS licensing server. This way, you’ll not get a prompt to enter your credentials when you’ll open RDS host configuration snap-ins in trusted domains/forests.
More information:
Best practices for setting up Remote Desktop Licensing (Terminal Server Licensing) across Active Directory Domains/Forests or Workgroup
http://support.microsoft.com/kb/2473823
Hope it helps!
Thanks.
Dharmesh Solanki

Dbconsole with multiple instances on the same server?

Hi!
I have a LINUX server running 2 separate instances - csp1 and csp2. I have a repository in csp1 and the dbconsole running for csp1. Now I need to find out if / how I can get the dbconsole running for the csp2 instance. This is Oracle standard edition 10.2.0.4. Both instances share the same Oracle Home and Listener. A second Oracle Home has the companion CD (http server) installed in it and has no instances associated with it.
Does anyone have information on how to do this? Here are some of my questions:
1) Do I need separate repositories for each instance or can the repository in csp1 be used for both instances?
2) Can the ports be shared or do I need to assign new port #'s for the 2nd instance? How / where do I do this?
Any hints, tips, suggestions, etc. are greatly appreciated!
Dave Venus

1) Do I need separate repositories for each instance or can the repository in csp1 be used for both instances?
Yes, in the free version of EM in 10g ie DB console,that's the restriction. You can't use it for more than one database. It has to be done explicitly for that another database whom you want to manage via it. So as per the answer, yes you do need a seperate repository for your second db. The other db will be in the same Oracle home and surely its em repository can work with the existing listener.But it does require its own set of config files which will be in a sperate folder under Oracle Home with its sid.
2) 2) Can the ports be shared or do I need to assign new port #'s for the 2nd instance? How / where do I do this?
As I mentioned in my last reply, you wouldn't be able to share the port that is already in use. You do need to have a seperate port configured. Normally when you would install the repository oracle would pick up itself a port number. The valid port range , if I remember correctly is from 5500 onwards ( I don't remember the last limit). Even afterwars, you can change the port using "emca" command.
Edit:
I forgot to mention that some time back, here on the forums, I had a discussion with a guy who mentioned that there is a workaround possible to add a target in the current Targets.xml for the second database. I did try it out but still that didn't give me two instances. The most recent one which I added only was accessible.
Update:
I did find that thread,here it is. See if this helps you,
Re: control two database with one database control
HTH
Aman....
Edited by: Aman.... on Oct 28, 2008 7:14 PM
Added Edit
Edited by: Aman.... on Oct 28, 2008 7:28 PM
Added thread

One database with multiple instance names

Dear all,
We would be very happy if anyone can provide me with some information of how RMAN operates.
Current situation: we have 2 machines running Oracle9i with just one database. The production database is "replicated" using EMC's TimeFinder/Snap. The differences are:
1. production database directory structure is slightly different than the replicated one: /usr/oraprod and /usr/orasnap respectively.
2. their pfiles are different: besides the differences in files location (controlfile, dumps,...), the instance_name are different (oraprod and orasnap respectively), but their db_name must be equal, which is oraprod.
3. at startup of the orasnap instance, all datafiles and redolog files must be adjusted/renamed to the orasnap directory structure (using a number of: alter database rename file) and the temporary tablespace needs to be recreated.
The orasnap instance is now ready for use... but problems arises within the RMAN repository. The oracat DB is the rman catalog. Connection to rman is done in this way:
$ORACLE_HOME/bin/rman target "sys/<password>@oraprod" CATALOG "catuser/<password>@oracat"
But "report schema;", whether the target is oraprod or orasnap, lists files which has the orasnap directory structure.
If the target is oraprod, then I expect to see the directory structure of oraprod and NOT the that of orasnap.
Did I overlooked something in here?
All help would be appreciated...
ps: see also my previous thread: "RMAN stops registering backups"

Hi Ebrian,
Another funny thing of RMAN's incarnations: rman seems not to be able to give a detailed backup listing (or restore some files) of the incarnation datafiles like:
RMAN> list backup;
BS Key Type LV Size Device Type Elapsed Time Completion Time
9266 Full 55G SBT_TAPE 00:41:37 19-NOV-07
BP Key: 9267 Status: AVAILABLE Tag: TAG20071119T021235
Piece Name: db_ORAPROD11771177639022355639022355
Controlfile Included: Ckp SCN: 4023549447 Ckp time: 19-NOV-07
List of Datafiles in backup set 9266
File LV Type Ckp SCN Ckp Time Name
1 Full 4023549460 19-NOV-07 /usr/oradata/oraprod/oradata2/system01.dbf
44 Full 4023549460 19-NOV-07 /usr/oradata/oraprod/oradata2/JAFFA_TSB_2.dbf
49 Full 4023549460 19-NOV-07 /usr/oradata/oraprod/oradata2/JAFFA_TSB_1.dbf
50 Full 4023549460 19-NOV-07 /usr/oradata/oraprod/oradata2/JAFFA_TSB.dbf
51 Full 4023549460 19-NOV-07 /usr/oradata/oraprod/oradata2/BLOB_TSP.dbf
Instead, we have only:
RMAN> list incarnation;
List of Database Incarnations
DB Key Inc Key DB Name DB ID CUR Reset SCN Reset Time
8357 8408 ORASNAP 2706083210 NO 1 06-MAR-06
8357 8358 ORASNAP 2706083210 YES 4014480736 15-NOV-07
8569 8620 ORASNAP 2706169607 NO 1 06-MAR-06
8569 8570 ORASNAP 2706169607 YES 4016907657 16-NOV-07
8990 9041 ORASNAP 2706322688 NO 1 06-MAR-06
8990 8991 ORASNAP 2706322688 YES 4020564274 17-NOV-07
3336 3337 ORAPROD 4063199190 YES 1 06-MAR-06
To know what is in (8990, 8991), we need to request:
SQL> select dbinc_key, fname from dfatt where dbinc_key = 8991
So, how can we treat incarnations? List, restore, ...

Use Oracle BI Standard Edition One with multiple instances

Hi!
Our problem is that we have four resource instances (one for testing, and three with datas from different customers) and we do not know how to switch in Oracle BI Standard Edition One between them. For us it seems that is not possible.
Regards,
Balazs
Message was edited by:
user547076

BI SE one is restricted to one RDBMS data source.
2.2.1 Oracle BI Standard Edition One usage
You can install Oracle BI Standard Edition One on a machine with up to two CPUs, and it can serve from five to 50 users. Oracle Warehouse Builder can pull data from any source, but the target database is limited to the included Oracle Database. Oracle BI and Oracle BI Publisher data sources are limited to the included Oracle Database, exactly one other database, and as many flat file data sources (for example, spreadsheets) as you require.

Issue with multiple instances of OC4J and one JDK installation

Hi,
I've successfully installed two instances of OC4J 10g (10.1.3.0.0) on a single server and am able to run with two differently named JDK 5.0 installs.
However, I've not been able to concurrently run both instances with a single JDK. The 2nd OC4J instance starts, but then stops immediately with a JVM termination.
Does anyone have an idea of the cause and a possible solution to the problem, as the current arrangement adds a level of complexity to upgrades that I'd like to remove?
Thanks,
Malcolm White

I run two OC4J 10.1.3.1 instances in parallel without any problem. Both instances use the same JDK and run without any problems. Seems you have some problems in you configuration.
Best,
Manfred

Firefox opens with multiple instances

I asked this before. The problem has come back.
"Firefox is operating strangely. I recently updated to 5.0.
Now, I use FF with several add-ons, including Too Many Tabs. When I closed FF last night, there were 5 tabs, plus a total of 31 tabs in 7 TMT toolbars. I closed FF normally.
When I ran FF this morning, it opened over 20 instances of Firefox. All of them except the 'main' one had a little orange 'Firefox' at the upper left, and no toolbars, and the main one opened with a New Tab only -- that is, the 5 tabs that I had were lost.
I think that this is a FF 5 problem, as this happens every day, and I didn't have this problem before, but I don't remember when it started. I think it started when I updated to FF 5, which was recently.
Now, when I had the problem before, there were a whole bunch of sessionstore-##.js files in my profile folder. I deleted them (leaving the sessionstore.js itself), and the problem was solved -- for a few days.
Now it's happening again, FF5 opens with over twenty instances -- two or three more every day -- and loses the tabs it had when I last closed, but there is only the one sessionstore.js. I have read the file and it looks like it's OK, but I wouldn't really know.
The fix before was to delete sessionstore.js and sessionstore.bak. Is there anything else?

It is possible that there is a problem with the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
Delete the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
* Help > Troubleshooting Information > Profile Directory: Open Containing Folder
* http://kb.mozillazine.org/Profile_folder_-_Firefox
* http://kb.mozillazine.org/sessionstore.js
If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.<br />
Deleting sessionstore.js will cause App Tabs and Tab Groups and all open tabs to get lost, so you will have to create them again (make a note or bookmark them).
See:
* http://kb.mozillazine.org/Session_Restore

Feedback nodes in subvis with multiple instances

Similar Messages

Maybe you are looking for