Field / Column for Minus/Plus sign in Query
Hello
In Query Designer I would like to create a column that shows the sign '+' or '-' when a key figure KF1 is below 0 or above. How do I do this? It has to be a separate column. I already created a calculated key figure KF2 that has as formula ABS (KF1). KF1 itself must not be shown as contains amount and sign in one field. I need to separate these 2.
Regards
Arjan
Hi Arjan,
If you want to display custom images (In this case + / - )
First you have to create an Image for Plus or Minus symbol and save it with .gif format in the MIME Repository.
Transaction SE80, Select MIME Repository.
SAP->BW->Customer->Images.
Upload the Images in this folder.
Create an exception in Query Designer.
If KF2 is <= 0, then Red (Bad 1), else Green (Good 1). Save the query.
Open Web Application Designer; Assign the query with the exception defined to the Analysis Web Item.
Select the Analysis Web Item -> Web Item Parameters tab -> Internal Display
Select Modification -> Single Module
Select Type as Generic Module
After selecting Generic module, you have to provide the implementation name.
Implementation Name should be com.sap.ip.bi.rig.ExceptionImage
Click on the button next to Parameter below it.
Here you will find the field, Name/Expression.
Give Parameter Name/Expression as ALERT_X, where X is the Alert number of the Exception defined in the Query. The mapping is as given below.
ALERT_1 equates to Good 1
ALERT_2 equates to Good 2
ALERT_3 equates to Good 3
ALERT_4 equates to Critical 1
ALERT_5 equates to Critical 2
ALERT_6 equates to Critical 3
ALERT_7 equates to Bad 1
ALERT_8 equates to Bad 2
ALERT_9 equates to Bad 3
Here you have to give ALERT_1 (Since you have defined Good 1 for Green in the report).
Select IMAGE from the dropdown box for the field u2018VALUEu2019.
Select the Image stored in the MIME Repository.
Similarly define the other Alert - ALERT_7 (Since you have defined Bad1 for Red) and select the corresponding Image from the MIME Repository.
The Exception Visualization drop down in Cell Content Area of the Analysis Web Item should be set to display Symbols.
This works only from BI 7.0 onwards.
Hope this helps.
Regards,
Hari.
Similar Messages
-
Search help for minus/plus
Hello Everyone,
i need to attach an F4 help to a column in a table control with having fixed values
" + and - ".
please suggest.
regards.Why not use try listbox instead with those two options? probably easier for the end user to use too.
-
Plus signs displaying in calculated field
I have created a form with a table that has a row that calculates automatically. I then created another form that I copied and pasted the table into. In the second form, when my users display or print the form with Adobe 7.0 Standard, the calculating field now displays a plus sign when nothing is entered to calculate. How do I make the plus sign disappear?
Actually, that was my first instinct as well, but it is not the issue. No matter how large I make the fields, no matter where I put them (IE not touching any other fields) - the plus signs still display. The really frustrating thing is that they won't display for me, just for other users. I have Adobe 7.0 Pro and we have just updated our users with Adobe 7.0 Standard. The plus signs do not display for me, but they do for the other users. To make the problem even less consistent, I had the exact same table in another form and in that form the users have used that table without any issues. I merely copied and pasted the table into the new form. I can't see any settings that have been changed. Any ideas?? Even a work around would be great.
Thanks,
Rebecca -
How can I dynamically change group field column?
Hello!
I need to group data and create group totals for that table. Is
it possible to dynamically change group field column for
specific table, depending on data retreived from parameter form?
Thanks,
Mario.quote:
Originally posted by:
ljonny18
Hi,
I am using a grid within a component in my Flex application.
I have an XML dataProvider, and I want to change the row
colour of my Grid depending on a value coming form my dataProvider
– but I cant seem to get this to work :(
can anyone help / advise me on how I can dynamically change the
colour of my grid row depending on a value coming from my XML
DataProvider????
Thanks,
Jon.
Hi,
a few hours ago I stumbled across this cookbook entry - it
didn't solve MY problem, but maybe it provides a way to solve your
problem?
http://www.adobe.com/cfusion/communityengine/index.cfm?event=showdetails&postId=61&product Id=2&loc=en_US
From the article:
quote:
Changing the background color of a DataGrid cell is not as
simple as changing some style because the default renderer for a
DataGrid cell does not have a backgroundColor. Therefore, to do
this simple task, you have to create a custom itemRenderer where
you draw your own background in the updateDisplayList function.
HTH
Uwe -
The screen which comes up no longer displays a playlist column and when I hit the plus sign and choose new playlist the screen doesn't display the narrow right side column for a new playlist. Does this have something to do with the new iTunes version I installed?
iOS: Unable to update or restore
-
Query problem: Some fields missing for org unit
I'm currently trying to fix a Minimum Compliance Report with some missing fields.
For a specific organisational unit no data is being generated for distribution and logistics.
How can i make sure organisational units generate a compliance figure correctly. The formula in the query is fine however when i generate the report there are X's in some fields.
How can i find the error?
any advice will be appreciated
Cheers
NeilHi Neil,
Have you tried using the function NDIV0 or NOERR in your formulas? The X in some of the fields may be due to undefined values (e.g. division by zero).
Hope this helps,
Juice -
Split a field into 3 columns for a report - Shoud be done in R/3 or BW
Hi all,
I have to split a Text Description (TXTMD) into 3 columns for reporting.
This description is available in R/3 table and in BW InfoObject.
What is the best way to accomplish this task ?
Should I enhance the Extract structure and fill those 3 new ZZ fields on R/3?
Should I do it on BW side ? How, please ???
Thanks in advance.
Regards,
Venkat.If the purpose of splitting is to overcome the limitation of Infoobject, I would recommend doing that in BW side for a couple reasons: You don't need worry about having R/3 transport and also if you are working on LO extractors you don't need to worry about setup tables. Secondly, it is easy to manage the fields in BW side than R/3, because you will be sending fewer fields.
thanks.
Wond -
How to add get the field name for a newly added site column.
I have the following:-
Enterprise wiki site collection inside SharePoint server 2013.
I added a new site column of type managed metadata.
I opened the enterprisewiki.aspx page layout using the SP designer, to add the newly added site column to it.
But I have noted that to add any site column I need to know the field name , for example the default wiki category column is referenced inside the page layout as follow:-
<Taxonomy:TaxonomyFieldControl FieldName="Wiki_x0020_Page_x0020_Categories" EmptyValueDescriptionForTargetTemplate="<%$Resources:cms,enterwiki_nocategories_assigned%>" DisableInputFieldLabel="true" runat="server"/>
<b>
So my question is how I can know the field name for my newly added site column?
Thanks in advance for any help.
RegardsHi,
The “FieldName” should be the internal name of the column, you will find it at the address bar at the “Site Columns”->”Edit Column” page:
Best regards,
Patrick
Patrick Liang
TechNet Community Support -
RPD - Cannot obtain number of columns for the query result :Working with MS SQL 2012 schema
Hi All,
I have created my warehouse in MS SQL 2012.
For management purpose, I have created different schemas in SQL database
In RPD, Physical layer, when i view data > I get error as
[nQSError:16002] Cannot obtain number of columns for the query result.
[nQSError:16001] ODBC error state : S0002 code : 208 message: [Microsoft][ODBC SQL Server Driver][SQL Server] Invalid object name 'tbl'..
[nQSError:16001] ODBC error state : S0002 code : 208 message: [Microsoft][ODBC SQL Server Driver][SQL Server] Statements could not be prepared..
I have already browsed : OBIEE 11g Strange ODBC Driver Error with SQL Server : Total Business Intelligence ... did not help me
please help!!!Hi All,
After all R&D it is been found that Oracle business administrator( RPD) needs default dbo schema. It doesn't accept custom schema for pulling data.
If anybody have other views please share.!!
Thank you -
For sel. field 'PERNR', no selection with SIGN = 'I'; OPTION ' ' allowed
HI,
I am getting this error when i m wrintg this routine.
data: l_idx like sy-tabix.
read table l_t_range with key
fieldname = 'PERNR'.
l_idx = sy-tabix.
L_T_RANGE-IOBJNM = '0EMPLOYEE'.
L_T_RANGE-FIELDNAME = 'PERNR'.
L_T_RANGE-SIGN = 'I'.
L_T_RANGE-OPTION = '<>'.
L_T_RANGE-LOW = '1004586'.
L_T_RANGE-HIGH = '1006263'.
modify l_t_range index l_idx.
l_idx = sy-tabix.
For sel. field 'PERNR', no selection with SIGN = 'I'; OPTION '<>' allowedwhen you are defining low and high value, u have to use
l_t_range-option = 'BT'. -
Plus sign not working anymore for distribution group
Without our Outlook client it was possible to make a New E-mail, enter a part of the distribution group, pressing control-k to force lookup the group and it was resolved. With the plus sign you can expand the requested ditribution group. Now this is not
working anymore. Does anyone know that there is maybe an option why this do not work anymore?
Within the image you can see that this worked. This is not working anymore.Hi,
What does "Now this is not working anymore" mean? Does it mean you didn't get the Expand List warning or it didn't expand the distribution group when clicking plus sign?
Does this issue happen to all users and all distribution groups?
If you mean you didn't the Expand List warning, we can try this to get it back:
Open your Registry Editor and browse to HKEY_CURRENT_USER\Software\Microsoft\Office\xx.0\Outlook\Options\General (where xx is the version of your Office.)
Look for and open the PONT_STRING value, you'll see a list of numbers in the Value box. Remove number
13 from the list and test again.
If you mean that clicking the plus sign didn't expand the group, we may try to open Outlook in safe mode and test again. To do this, press Windows key + R to open the Run command, type
outlook /safe and press Enter.
If I've misunderstood something, please feel free to let me know.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. -
The "plus" sign for opening a new tab disappeared. what happened?
the "plus" sign for opening a new tab disappeared. what happened? how can this be fixed?
hello, can you try to replicate this behaviour when you launch firefox in safe mode once? if not, maybe an addon is interfering here...
[[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] -
BO: separate column for + - sign apart from column with value
Hello
In Business Objects Web Intelligence I would like to create a column that shows the sign '+' or '-' when a key figure KF1 is below 0 or above. How do I do this? It has to be a separate column. I already created a calculated key figure KF2 that has as formula ABS (KF1). KF1 itself must not be shown as contains amount and sign in one field. I need to separate these 2.
Regards
ArjanYou can create one more variable with the formula:
=If([Key FIG 1]<0) Then "-" Else "+"
Regards,
Rohit -
I bought an Pp on my iPhone and it has the plus sign on the corner of app meaning its for the iPhone/ iPad if I bought on the iPhone do I have to pay for it on the iPad again
So I would have to pay for it again
-
Field description / label become a plus (+) sign in maintenance dialog
Hi expert,
I've create a maintenance view & use it in a maintenance dialog screen. All fields shows ok except one field , the label show a '+' sign only, why huhh ?
Did anyone face this problem before ? Please help. Thanks
JaniceIn the Generate Table Maintenance Dialog screen, go to Environment->Modification->Maintenance Screens via the menubar. Then go to the screen layout by clicking the Layout button.
Now double click on the column name where you have the '+' sign and type over your required label. Save and activate. Now run this via SM30 you should see the correct label.
Hope this helps.
Cheers,
Sougata.
Maybe you are looking for
-
My Apple TV will not show my photos in iPhoto on my iMac in the same sequence of images that I can see when viewing the iPhoto photos on my iMac. This is especially frustrating when I try to show my travel pictures in sequence on my TV. I have to res
-
so i bought the 4gb nanopod though when i went put songs on it, it could only fit around 2.02 gb or such???! does anyone have/did have a similiar problem that they have solved? any help would be much appreciated
-
Print to Video; Screen All Messed Up
My screen is stuck, displaying a large rectangular checkerboard with a 2 inch black border. Here's how it got to this state: 1. I had done a Print to Video, and when it finished up, instead of the message displaying that it is OK to start recording,
-
Cursor on the same field after validation (urgent.)
Hi All, I m doin validation on certain field. if the user enters wrong value then error message should be given along with the cursor should be in that field only. Here in my case what happens is the cursor goes to intial screen i want it at on th
-
How to find ECC tables/ reports based on which a DB View is created?
Hi All, We have customized data source created based on a View/ Table. How can i find the ECC tables/ reports based on which this View has been created and also the logic behind which the different fields extract data from ECC.. Please advice. Than