Field selection on variable screen

Hi All,
I have a requirement in my report.
Selection screen would need to show:
Material Group - either this or the GL field must be completed
GL account - either this or the MG field must be completed
How do you I go about to do this?
Thanks.

Hi Arun,
my requirement is the user should be able to enter either of the fields. But if he enters one, say for eg.material group, then he should not be able to enter the GL account and vice versa.
Is there anything we can do so that if the user enters one field then the other field should be unhighlighted or something..

Similar Messages

How to add search help to customer field of field selection on ESS Screen?

Hi all,
I am able to get customer field CUSTOMER01 from field selection customization on leave application ESS Screen. How to attach search help which contains Holiday date & its description to this field?
Thanks,
Swapnali

Hi,
This is for working time -> leave request screen
In field selection there is one field 'code for description of illness'. I have done required config for getting this field on ESS Screen. This field already has standard search help. So I m able to view the values of this field on ESS screen .
So I thought to try assigning custom search help to this CUSTOMER0 field. Is there any method in BADI PT_ABS_REQ through which I can achieve the same. Please help.
-Swapnali

Dynamic field selection by variable input in bex report

Hi Frineds,
          I have created variable on characteristic ( 0CURTYPE ) which mainly have two values 'A' and ' B' .Based on my variable input in Bex I have to dynamical select key figuers Example .
0CURTYPE    KeyfigA KeyFigB
A                    123 Rs   144 $
B                     124 Rs   145 $
        In above example is user select A I have to display KeyfigA   if I select B then i should display Keyfig B in Bex report .
I know that by using user exit in report we can do but I would like to try with out Exit .
Thanks ,
Kumar.

Your formula variable allowed to be of type either number or amount or date or quantity which are all numeric(currency type/type tab) .But your reference characteristics is a letter.So there is an inconsistency here and you can not make equal your formula variable and 0currtype's variable.
Have a look at Akshata's post in this thread :How to create formula variables in sap bi?
Therefore this model does not work and I can not see any other way apart from a very simple user exit which says if 0currype=A, then formula variable=0 else if 0currtype=B then formula variable=1.After that you can use your formula variable in your formula since the letters are now converted to numbers.
By the way it mustn't ask two things in the selection screen.Since your formula variable takes the values of 0currtype's variable automatically.Did you create the formula variable with replacement path(general tab) referencing to 0currtype?Just create a formula, enter this formula,right click create formula variable,go to general tab then replacement path then reference to 0currtype.But as I told, you nevertheless can not achieve it, just explaining it.
Regards,
Sunny

User Exit/Field Exit for Field Selection in MM01 & MM02

Dear All,
Please Tell if I want to make Field Purchasing group Mandatory in MM01 & MM02 in Purchasing view only.I dont want the data to be updated in MRP1 view. Please tell me is there any exit for the same.
Regards,
Sandeep

You can customize
via
SPRO>Logistics - General>Material Master>Field Selection>
first from
Assign Fields to Field Selection Groups
you must assign MARC-EKGRP (Purchasing Group)
to a selection Group which will be mandatory.
Then from Maintain Field Selection for Data Screens
you must choose the Material Types which you want to make
Purchasing Group mandatory.
You must check Reqd Entry for the material types you want
Best Regards
Hope will help

Error while using selection option variable in the selection screen

Hi All,
I am facing an issue while using selection option variable in the selection screen for one of my reports.
Scenario: For the field "Region From" we need to have wild card logic () in tes selection screen, for example if we put "BE" in the selection screen for the field Region From then the query should be executed only for those "Region From" values which begin from "BE".
Approach: For the above requirement I have made a selection option variable for "Region From". This allows use wild card
But when the report is executed we get the following error:
"System error in program CL_RSR_REQUEST. Invalid filter on ETVRGNFR".
(ETVRGNFR is technical name of the info object Region From)
Though the report is executed it displays all the values for the field "Region From" irrespective of the selection given in the selection screen.
Please give suggestions / alternate solutions to crack this issue.
Thanks in advance
Regards
Priyanka.

Hi,
Try to use a variable of type Customer Exit and do the validation inside the exit to display according to your request.
This is just my view, i am not sure if u are already using this or Char. Variable.
Cheers.
Ranga.

Copy 'Favorites' in 'Select Values for Variables' screen

I need to copy a list that I created as a 'Favorite' in the 'Select Values for Variables' screen for Customer to all the other userids so that everyone is using the same list of customers. Can someone tell me the table(s) where these values are stored? Is there a function module or program available that copies 'Favorites'.
It would be nice if you could select if the 'Favorites' you create can be 'Global'.
Thanks.

the variant values are stored in RSRPARAMETRIZA. the field content stores in XML format. you can write an ABAP program to read and update it.
Edited by: Ananda Theerthan on May 26, 2010 8:56 PM

Variable selection in WEB wrongly transferred to initial variable screen

Dear all,
I am currently working for a company in the Netherlands where they use a lot of reports in the web.
Till one month ago, selecting a period from the list in the WEB didn't gave any problems.
However, at this moment while selecting a random period, the period is not correcly taken from the variable selection list (see: http://members.home.nl/repoortman/variable.jpg)
Example:
selecting reporting period 001.2006 via the selection screen
it is 'transferred/copied' to the initial variable selection screen as '001 06' while I expect as it should be '001.2006'.
The work around is to enter the period and year manually, but this is not a recommended action from user perspective.
Perhaps a coincidence, but this error is applicable since the last service pack upgrade: SAP BW 3.5, SP22, SAPKW35022.
How is this possible and how can I solve it (perhaps a setting in BW or a table?)
any help is more than welcome!
thanks in advance.
R.E. Poortman

in WAD in the template properties you can set the parameter Force Variable screen
the same can also be pass as a URL parameter
VARIABLE_SCREE=X
this will make the variable screen to comeup irrespective of whether the variable is mandatory or not.
Hope this helps.
Regards
Raja

BEx variable screen to exclude values from selection

Hi,
I have a requirement in the BEx report variable screen here my user want to select values for the variable and
from the values in selection on right hand user wants to exclude few values.I want the red color exclude button to appear in the screen.can anyone tell me whether there are any commands in WAD for variable personalization.
Thanks,
Harsha

Hi,
Try this.
TABLES : ztable.
SELECTION-SCREEN:BEGIN OF BLOCK b1 WITH FRAME TITLE text-t01.
PARAMETER : p_field1 TYPE field1_in_ztable,
                        p_field2 TYPE field2_in_ztable.
                        p_field3 TYPE field3_in_ztable.
                        p_field4 TYPE field4_in_ztable.
                        p_field5 TYPE field5_in_ztable.
SELECTION-SCREEN:END OF BLOCK b1.
DATA : itab TYPE TABLE ztable,
             wa_itab TYPE ztable.
AT SELECTION-SCREEN.
      MOVE p_field1 TO wa_itab-field1.
      MOVE p_field2 TO wa_itab-field2.
      MOVE p_field3 TO wa_itab-field3.
      MOVE p_field4 TO wa_itab-field4.
      MOVE p_field5 TO wa_itab-field5.
INSERT ztable FROM wa_itab.
IF sy-subrc = 0.
MESSAGE 'Successfully saved' TYPE 'I'.
ENDIF.
Thanks,
Sri.
Edited by: Sri on Jul 28, 2009 4:15 PM

Adds selection field at the first screen of FBL3N (G/L line item display)

I would like to adds line item selection field at the default first screen of FBL3N.
The field I'd like to add at the default selection screen is :Amount.
This field can be selected at dynamic selection. But I'd like to use the field at the first screen of FBL3N, not in daynamic selection screen.
If anyone knows how to add the fields into FBL3N first screen, please advice me how to do it.
Edited by: Itchy31 on Jul 23, 2009 8:30 AM

Hi,
You can not add the new fields in the selection criteria thats the reason dynamic options are given for the further selection.
If you still want to add in the selection screen then go for a customisation and coordinate with the ABAPer which is not suggestable as it is readily avilable in dynamic selection.

Dialog programming - How to place a select-option field in a dialog screen

Hi all,
In Dialog Programming, How to place a select-option field in a dialog screen.
Kindly give me some example code...
Thanks,
Jaffer Ali.S

hi Ali,
U can add select-options in ur module pool by using SELECTION-SCREEN BEGIN OF SCREEN <scrn> AS SUBSCREEN command.
check this link for reference.....
http://help.sap.com/saphelp_47x200/helpdata/en/e7/deb237b9a9a968e10000009b38f8cf/frameset.htm
Example Code :
DATA : ok_code TYPE sy-ucomm.
SELECTION-SCREEN BEGIN OF SCREEN 1010 AS SUBSCREEN.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: p_rad1 RADIOBUTTON GROUP grp1 DEFAULT 'X',
 p_rad2 RADIOBUTTON GROUP grp1,
 p_rad3 RADIOBUTTON GROUP grp1.
SELECT-OPTIONS: s_matnr FOR mara-matnr,
 s_matkl FOR mara-matkl,
 s_mtart FOR mara-mtart.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN END OF SCREEN 1010.
START-OF-SELECTION.
CALL SCREEN 100.
*& Module STATUS_0100 OUTPUT
MODULE status_0100 OUTPUT.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'xxx'.
CALL SCREEN 1010 .
ENDMODULE. "status_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
 text
MODULE user_command_0100 INPUT.
CASE ok_code.
 WHEN 'EXIT'.
 LEAVE PROGRAM.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
SCREEN 100 ****************
PROCESS BEFORE OUTPUT.
MODULE status_0100.
CALL SUBSCREEN sub_1010 INCLUDING sy-repid '1010'.
***** where sub_1010 is name of sub-screen area
PROCESS AFTER INPUT.
CALL SUBSCREEN sub_1010.
MODULE user_command_0100.
<<< REMOVED BY MODERATOR >>>
Harimanjesh AN
Edited by: Marcelo Ramos on Dec 17, 2008 7:54 PM

Field References, Field Selection Group & Screen Sequence

Dear Experts,
Please whare are the importance of field References, Field Selection group & Screen Sequence? How do i use them?

Hi,
These are Object based (Like Material master, BOM, Routing etc..), so depending on how you want the screen layout and how you want the mandatory/optional field defination you can define it here.
Regards,
Prasobh

CATS Field selection screen

Hi,
In CATS field selection screen -> Screen groups -> under work list and Data entry selection, I have chosen the fields Network, Activity Type, Activity, Sender Cost center, Plant, Total and Short text to be displayed / input.
Out of these in CAT2, I am able to view only Activity and Total under Worklist area and Sender cost center and Total in Data entry screen...
Why is this so and wat could be the error....
Note : I did configurations under Settings for CATS for Service Providers node.
Regards
Nima

Check whether you have maintained the same data entry profile for yourseelf , under which you have saved the fields list.
CAT2 view depends on the data entry profile chosen for the user.
Thanks
Rakesh

Select-option field on module pool screen

hi all,
Can anyone pls let me know, how to design and use a field like a select-option field on a Module-pool screen i.e. how can i get that multiple selections tab after the high field of the select-options.
thanks in advance,
vinny

All you need to do is define your selection screen and then embed it in a subscreen area of your dynpro(screen). Here is a sample program.
report zrich_0006 .
tables: mara.
* Custom Selection Screen 1010
selection-screen begin of screen 1010 as subscreen.
selection-screen begin of block b1 with frame title text-001.
parameters: p_rad1 radiobutton group grp1 default 'X',
 p_rad2 radiobutton group grp1,
 p_rad3 radiobutton group grp1.
select-options: s_matnr for mara-matnr,
 s_matkl for mara-matkl,
 s_mtart for mara-mtart.
selection-screen end of block b1.
selection-screen end of screen 1010.
start-of-selection.
call screen 100.
*& Module STATUS_0100 OUTPUT
module status_0100 output.
* SET PF-STATUS 'xxxxxxxx'.
* SET TITLEBAR 'xxx'.
endmodule.
*& Module USER_COMMAND_0100 INPUT
module user_command_0100 input.
endmodule.
* Screen screen 100 with a subscreen area called "subscreen_1010"
* Screen Flow Logic follows
*process before output.
* module status_0100.
* call subscreen subscreen_1010 including sy-repid '1010'.
*process after input.
* call subscreen subscreen_1010 .
* module user_command_0100.
Regards,
Rich Heilman

Screen sequance and Field selection group

Dear All,
Kindly help me by explaining the different steps( in detail) to modify the screens of Media product and media issue according to my requirement using screen sequance (Reference screen) and field selection group ?

Hi,
These are Object based (Like Material master, BOM, Routing etc..), so depending on how you want the screen layout and how you want the mandatory/optional field defination you can define it here.
Regards,
Prasobh

BEx Analyzer Query Selection Variable Screen Issue

We are in the process of applying support packs to our system--BI7.01 and we are going from SP04 to SP10. After the application of support packs, when we execute a query (or a workbook with attached query), the query variable screen that normally appears does not, the query just executes without being able to filter/enter selection criteria.
We are using BEx Analyzer 3.5--long story about not upgrading to BEx 7.x. In our systems without support packs, the queries/workbook execute as expected. I've tried making a variable mandatory in one of the queries as a test and the selection screen then appears; however, we have hundreds of queries.
I've searched SDN and OSS and have found some similar issues, but not a solution. Any help is greatly appreciated. Thanks.
Norris

Hello Michael,
Thanks for the informationit's funny as I think I was stumbling upon this notegoing support pack by support pack--when you posted it.
We applied to our development system and we are now getting the selection screens, so it does appear to resolve the situation. Thanks again for the information.
Norris

Field selection on variable screen

Similar Messages

Maybe you are looking for