Fields for COMMPR01 .

Hi there,
I've created a material using COMMPR01 transaction , however this material has some components Which I added following the next route Relationships -> Components tab at the same transaction .
My problem is that I know the table where the material it´s saved (comm_product), but I don´t know in what table I can find the relationship between them (material - component) ,by the way the components are materials too .
Could you give me more information about it? please.
the relation´s type between material and component is "SET".
One more thing I know that all the components are related between themselves with the field COMM_PR_FRG_REL-FRAGMENT_TYPE (for each element of one material all have the same value of this field).
Thank you.

By standard authorization object according to my knowleadge is available only option to set create/display/edit of all product's data and not by segment of data. To set that you can use authorization objects COM_PRD and COM_PRD_CT. If you want to setmaintainance by different segments of data, you will have to implement Z logic via badi.
Regards.

Similar Messages

IF statement in Calculated Field for Share point, doesnt calculate sum in my Excel Pivot table.

Hi Everyone
I used this in SP calculated column field.
=IF([Shift Sched]="1pm to 10pm","0",IF([Shift Sched]="2pm to 11pm","1",IF([Shift Sched]="3pm to 12am","2",IF([Shift Sched]="4pm to 1am","3",IF([Shift Sched]="5pm to 2am","4",IF([Shift
Sched]="6pm to 3am","5",IF([Shift Sched]="7pm to 4am","6",IF([Shift Sched]="8pm to 5am","7",IF([Shift Sched]="9pm to 6am","8",IF([Shift Sched]="10pm to 7am","8",IF([Shift
Sched]="11pm to 8am","7",IF([Shift Sched]="12pm to 9am","6",IF([Shift Sched]="1am to 10am","5",IF([Shift Sched]="2am to 11am","4",IF([Shift Sched]="3am to 12pm","3",IF([Shift
Sched]="4am to 1pm","2",IF([Shift Sched]="5am to 2pm","1",IF([Shift Sched]="6am to 3pm","0",IF([Shift Sched]="7am to 4pm","0",IF([Shift Sched]="8am to 5pm","0",IF([Shift
Sched]="9am to 6pm","0",IF([Shift Sched]="10am to 7pm","0",IF([Shift Sched]="11am to 8pm","0",IF([Shift Sched]="12pm to 9pm","0"))))))))))))))))))))))))
it was able to work fine however my issue is when i extract the information to excel and use a pivot table the table is not able to calulate the sum of the value for this field. Can you please help me with this. this is for an Attendance traker for Night
Differential pay for employees. they create a daily log of their shift schedule and if i summarize this in pivot the value in the calculated field for this is not getting the sum.
Thanks,
Norman

Hi Everyone
I used this in SP calculated column field.
=IF([Shift Sched]="1pm to 10pm","0",IF([Shift Sched]="2pm to 11pm","1",IF([Shift Sched]="3pm to 12am","2",IF([Shift Sched]="4pm to 1am","3",IF([Shift Sched]="5pm to 2am","4",IF([Shift
Sched]="6pm to 3am","5",IF([Shift Sched]="7pm to 4am","6",IF([Shift Sched]="8pm to 5am","7",IF([Shift Sched]="9pm to 6am","8",IF([Shift Sched]="10pm to 7am","8",IF([Shift
Sched]="11pm to 8am","7",IF([Shift Sched]="12pm to 9am","6",IF([Shift Sched]="1am to 10am","5",IF([Shift Sched]="2am to 11am","4",IF([Shift Sched]="3am to 12pm","3",IF([Shift
Sched]="4am to 1pm","2",IF([Shift Sched]="5am to 2pm","1",IF([Shift Sched]="6am to 3pm","0",IF([Shift Sched]="7am to 4pm","0",IF([Shift Sched]="8am to 5pm","0",IF([Shift
Sched]="9am to 6pm","0",IF([Shift Sched]="10am to 7pm","0",IF([Shift Sched]="11am to 8pm","0",IF([Shift Sched]="12pm to 9pm","0"))))))))))))))))))))))))
it was able to work fine however my issue is when i extract the information to excel and use a pivot table the table is not able to calulate the sum of the value for this field. Can you please help me with this. this is for an Attendance traker for Night
Differential pay for employees. they create a daily log of their shift schedule and if i summarize this in pivot the value in the calculated field for this is not getting the sum.
Thanks,
Norman

Posting Error: Field Pers.No. is a required field for G/L account

When I am trying to run the simulation posting run (PC00_M99_CIPE) then is getting an error that u201CField Pers.No. is a required field for G/L account 2275 504566872u201D
Field Pers.No. is a required field for G/L account 2275 504566872
Message no. F5808
Diagnosis
The value for field "Pers.No." in the interface to Financial Accounting is an initial value but you are required to make an entry in the field selection for G/L account "504566872" in company code "2275" linked to the field selection for posting key "50".
Procedure
It might be an error in the configuration of the G/L account field selection. The initial application, used to call up the interface must otherwise define a value for field "Pers.No.". If this is the case, contact the consultant responsible for the application used to call up the interface or get in contact with SAP directly.
Please help.

First of all did you required to post with personnel number or not....if it is not required then goto FS00 enter your GL account 504566872....find Field Staus Group under tab Create/Bank/Interest........then goto t code OBVV and select your field status group then click on field status and select Additional account assignments and check personnel number status and change as per your requirement optional or required.
If personnel number required then create symbolic a/c with account type Q and assign gl account to this symbolic a/c.
Mohan

Issue with creation of a specific field for a java program.

Hey everyone,
This is homework which is end of chapter "challenges" to practice what we've learnt.
The chapter covers inheritance (super class and all things related)
I'm having quite an annoying issue with the very beginning of the instructions, where it tells me to make the following fields:
- Employee name
- Employee number in the format XXX-L , where each X is a digit within the range 0-9 and the L is a letter within the range A-M.
- Hire date
This is what I wrote for code so far
private String name;
//private WTF
private String date;I really have no idea what to do for the second field, how to even constrain integers and letters in the same field with a rule for number range and letter range, and that for each character independently, for what I understand.
Any advice with this? It's blocking me from continuing -_-, because I can't make accessors and mutators and constructors, etc, if i'm still unsure of how the fields unfold.
Thanks in advance.

You can create a HireDate class.
public class HireDate{
   private final int day;
   private final String month;
   private final int year;
   public HireDate(int day, String month, int year){
      this.day = day;
      this.month = month;
      this.year = year;
}In the HireDate Constructor you could put if statements to ensure that only correct information is present. The fields are final because the hire date will not change. Override the toString() method so that when you print it out it will be in the correct format. Create some getter methods to get the private fields.
Then in your other class just do this
HireDate hired = new HireDate(10, July, 1991);Now you have an object that stores all 3 fields for you. You can use the object as you like and when it prints it will be in the format you want.
Or you could just make hireDate a String variable. That is what I always did and I never lost marks for it. The reason I suggest this way is because you mentioned rules and constraints.

Not all fields for Business partner are exported

Hello,
I am exporting Business partner data from CRM to another system, through XIF. I get on target system XML file with Business partner data. But I have only standart fields. I can't get fields, which was created my company for own use.
For example, for Business partner I have Business Agreement, but after export to XML, I have no Business agreement data in another system. But I have standart data, for example, Business partner Name, ID, ets.
Anybody know what I can do to export all the fields for Business partner? Some transaction or somthing else? Where can I customize output XML with Business partner data?
Best regarda,
Alexander.

Hi,
You have the right observation. There is no mandatory fields for BP. It means you can update any single field against CardCode. CardCode is the only mandatory field which is the only primary key must be unique.
Thanks,
Gordon

Show different key fields for different caracteristics in the column.

Hi, experts
I am creating a query where there are 4 colomns reprensenting 4 different dates. But I would like to display diffferent key fields for them. For example, under DAY 1, i would like to diplay KeyField 1, for DAY2, DAY3 and DAY4, KeyField 2 et 3 will be added under them.
To do that, i made these key fields "Constant selection" and made some definition in the cells-------
On the line of DAY1 in the colomn KeyField 2 and KeyField 3, I made them "Always Hide".
But I didn't get what i wanted as the two columns (KF2 et KF3) still appear in the report, even if there are no data in these two columns.
Is it possible to realise this requirement:
DAY1 DAY2 DAY3
KF1 KF2 KF3 KF2 KF3
Thanks in advance!!!!

There is no need to define a cell for this, use a restricted key figure:
KF1 needs to be restricted by Day1
KF2 restrict it by Day2 and so on,
and use those restricted figure in the key figure section, but to make the column more descriptive use a text variable for the name of the columns.
this should be easier than cell definition.
thanks.
Wond

Table and table field for PICKING QUANTITY.

Hi friends,
I need to use PICKING QTY in script. but it is in structure LIPSD-PIKMG.
Please say Table and Field for Picking quantity.
I need a table and field.
THANKS in advance.
balaji.

Hi Tarani, Rasmi,
Thank you for quick response.
LIPS-LFIMG is Delivery Qty . It is not Picking Qty.
please let me know for PICKING QTY to display in my Script.
Thank you.

Project Server 2010 - create a custom enterprise project field for persons (no text, no lookup table...)

I want to create a custom enterprise project field and would like to use instead of for example a text attribute or a look-up table a field for employees (e.g. project manager) which are coming e.g. from the Active Directory. But when creating this custom
project field I cannot see such an option. What solution do you suggest as I want to avoid that everybody uses different names and spellings for e.g. the project manager and without having to fill the lookup table with all resources of the company.
Thank you so much for your help!

Hi,
Are you using Proejct Server 2007, 2010, 2013?
In case you're working with 2010 version, here is an excellent
blog about how to insert a resource picker in a PDP (project detail page).
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

Field Bline date is a required field for G/L account 1200 122400

While posting a Good receipt document using MIGO for a PO I am recieving the following error
Field Bline date is a required field for G/L account 1200 122400
Though both the document date and Posting date fields are filled with appropriate date.
The detailed message reads as follows, now my question is how to change the baseline date for the Cocd 1200 for GL account 122400
Field Bline date is a required field for G/L account 1200 122400
Message no. F5 808
Diagnosis
The value for field "Bline date" in the interface to Financial Accounting is an initial value but you are required to make an entry in the field selection for G/L account "122400" in company code "1200" linked to the field selection for posting key "81".
System Response
Error
Procedure
It might be an error in the configuration of the G/L account field selection. The initial application, used to call up the interface must otherwise define a value for field "Bline date". If this is the case, contact the consultant responsible for the application used to call up the interface or get in contact with SAP directly.

Hello Ravinagh,
Heres what I did:
OB41> Double clicked on posting key 81> clicked on field status> Payment transactions> Both Due date and Value date have already been set to optional.
For OB14 it asks me to input a field status variant.
There are three of them. Now here is the tricky part, how do I find out which field variant has been assigned
0001     Field status for 0001
1000     Field status for CoA 1000
3000     Field status for CoC 3000
I went further and check for all the three variants one by one
and found out that in the field status> Payment transactions for the following entry in the field status group
G045     Goods/invoice received clearing accounts
The DUE DATE and VALUE DATE are suppressed. What do I need to do here?
Next I checked OBB8 to find the following three Options I dunno which one of them is applicable to the GL account 122400 for Cocd 1200. Where can I find the assignment? How can I find which payment term is being used.
   PayT        Sales text
Day limit   Explanations
0001
0           Payable immediately Due net
0002
0           Within 14 days 3 % cash discount
              Within 30 days 2 % cash discount
              Within 45 days Due net
0003
15          Within 14 days 2 % cash discount
              Within 30 days 1.5 % cash discount
              Within 45 days Due net
              Baseline date on 30 of the month
Entry 1 of 40
Well I went ahead and clicked on each of them
For 0001 the Default for Baseline date is set to Posting date (Do I need to change anything here?)
For 0002 the Default for Baseline date is set to Document date (Do I need to change anything here?)
For 0003 the Default for Baseline date is set to Posting date (Do I need to change anything here?)
Please guide me here. If you need screenshots I would be glad to mail it to you.
I hope you understood the scenario.
Thanks
Ron

Fields For Good Reciept and Issed !

Hi all,
I want the fields for the goods reciept and good issued for getting the stock for a particular material as on to date (which is my selection screen) ...
I have selected the sales data from the VBRK and VBRP tables which is for sales information and now i need to find out the Stock information. My Requirement is to maintain sales stock and to show the Turn Over Ratio ???
Can you tell me the tables and the fields where i will get them ...
I m calculating my Stock as:
Stock (as on date) = Substracted Value (Reciepts - issues ) - current stock.

In MSEG there is field for Sales order number as well as item number from that you can get the Goods issues quantity,similarly in MSEG you also have purchase order number and purchase order item numner from which you can get the goods purchased quantity by passing it to VBAP and EKPO respectively.
Regards
Mohamed Mansoor
Message was edited by:
Mohamed Mansoor Kasim

How to create a new field for Q3 - QM notification in Header and item level

Dear All,
l
Sub: How to create a new field for Q3 - QM notification in Header and item level
Ref. the link --> Quality Notification
We want to create a new field in header level and item level.
As per the thread the solution is given below.
In the IMG Config: Quality Management -> Quality Notification -> Notification Types -> Define screen areas for notification types Then Choose 'Define screen areas' Then Click on 'New entries' button Now, select the relevant Notification Type and click in 'Enter'. Select the 'Iten Cases' register and remember to setup the Tabstrip Header, Icon, etc. Set the 'Tabstrip active' flag. Then Save.
Quality Notification -> Notification Types -> Define screen areas for notification types
WE ARE UNABLE TO FIND IN CUSTOMIZATION PATH --> DEFINE SCREEN AREAS FOR NOTIFICATION TYPES.
Please help.
Question No. 2 :
THE REQUIREMENT IS GIVEN BELOW.
We want to hide the field in Q3 - QM Notification
In header --> Reference tab --> Item (sub heading) --> "DEFECT LOCATION" FIELD TO BE ELIMINATED (HIDE)
Ref the link --> Quality notification
The solutiion is given below.
Hi Sami,
We can hide the collumns using the Transaction OQM1 and Program Name SAPLIQS0.
Lets say Defect location need to be hidden, the field TXTCDOT need to have the radio button HIDE.
Hope this will suffice your requirement.
Kindly ask me if you need any other details.
Thanks & Regards,
Srinivas.D
Hi Sami,
We can hide the collumns using the Transaction OQM1 and Program Name SAPLIQS0.
Lets say Defect location need to be hidden, the field TXTCDOT need to have the radio button HIDE.
Hope this will suffice your requirement.
Kindly ask me if you need any other details.
Thanks & Regards,
Srinivas.D
By double clicking the "DEFECTIVE QUANTITY (EXTERNAL), WE COULD NOT GET --> field TXTCDOT .
Plese do the needful.
We are using ECC6.0 Ehp3 and Ehp4.
With Best Regards,
Raghu Sharma

Dear Pushpa,
Transaction Code :SHD0 is working fine.
Please accept my sincere thanks for your sharing your Knowledge.
I am able to fulfill my
Regarding the enhancement, I have not tried.
Once I will complete, I will award the fulll marks to you.
With Best Regards,
Raghu Sharma

What is the table field for PO releaser in R/3 (4.7 Enterprise)?

Hi Gurus out there:
Do you know if there is a table field for PO releaser in R/3 (4.7 Enterprise)?
We use for e.g. the transaction ME29N to release a PO and I haven't been able to find a DB table where the PO releaser is stored.
In DB table EKKO I can find the fields FRGGR (Release group), FRGSX (Release strategy), FRGKE (Release Indicator), FRGZU (Release status) and FRGRL (Release Not Yet Completely Effected) but no information of the user who released the PO.
Many thanks in advance.
/hw

Hi
<b>Have you tried reading the details of the PO Releaser using the BAPIs ?</b>
BAPI_PO_GETRELINFO
BAPI_PO_GETITEMSREL
BAPI_PO_GETITEMSREL            List Purchase Orders for Release (Approval): New as of 4.0A
BAPI_PO_GETRELINFO             Display Detailed Release (Approval) Information on Purchase Order
BAPI_PO_RELEASE                Release Purchase Orders
BAPI_PO_RESET_RELEASE          Cancel Release of Purchase Orders
<u>Related link -></u>
Re: How to fetch data from back end for PO?
Hope this will help.
Do let me know.
Regards
- Atul

How can I add a new field for Belgium in T588M?

Hi experts,
I am trying to change the infotype 0002 screen for BElgium. This is how I am doing T588M > new entry > MP000200 > alt. screen 2012 > var. key 12 > feature p0002 >.
I also maintained 12 as the var. key for the countr yBE in P0002 feature. I want to add P0002-GBDEP (state) field which is already there for MP000200 screen 2000 which is the SAP standard screen. why it does not copy this field when I create this field for Belgium. HOw can I bring it for BEl. Please advise.
Thanks a ton,
JEss...

As P0002-GBDEP is not included in screen '2012', you'll need to create an additional custom screen to show this field. Then, you'll need to config table 'T582C' to have 'MP000200' / screen '2012' to have this custom screen as an 'include' screen (e.g. if your new custom screen is ZP000200 / screen '0100', then in T582C, you'll need an entry with 'MP000200' '2012' ZP000200' '0100'.

How to apply formula field for a chart object in crystal report XI

Hi
how to add formula field for a chartobject, i tried the following code but returns invalid condition field.
i want to show different chart in same crystal report viewer with different coursestatus values.
please suggest where ia m wrong.
               FormulaField oFormulaField;
               oFormulaField = new FormulaField();
               oFormulaField.Name = "Status1";
               oFormulaField.Text = "{CSP_PROCESS_REPORT.Coursestatus} = 'Mastered'";
               oFormulaField.Syntax = CrFormulaSyntaxEnum.crFormulaSyntaxCrystal;
               oFormulaField.Type = CrFieldValueTypeEnum.crFieldValueTypeStringField;
                boChartObject.ChartDefinition.ConditionFields.Add(oFormulaField);
regards,
Padmanaban V

i missed the following line in my code.
rcDoc.DataDefController.FormulaFieldController.Add(oFormulaField);
now it works......
my next issue is that,
chart returns True & False captions. but i want to show actual value. how its to be done
regards,
Padmanaban V

Is there a way to simultaneously add text to Comments field for multiple files?

Is there a way to simultaneously add text to Comments field for multiple files? I know I can use Option+Comman+i to bring up the Inspector window but it doesn't have a Comments field. For example, in iTunes you can select multiple files and change metadata for any field simultaneously and easily yet when it comes to the Comments field in the Finder, this seems to be missing.
In our production environment, Comments field is important because we place notes about what drive the file originated then when it gets transferred to LTO-6 tape via LTFS, we can quickly trace it in the event we needed to recreate the hard drive. Because tape archiving is linear, we can't store all of the files on the same tape.
We've tried using Apple's Automator but it too seems to not have a way to batch change text in the Comments field. Any help is appreciated.

What is "order data"?

Fields for COMMPR01 .

Similar Messages

Maybe you are looking for