Fields[i].Field.Value in C#

Hello all,
I am new to Crystal and am updating an application that currently uses Crystal 8.5. I have installed Crystal 2008 and am attempting to update some methods and properties so that the upgrade will be smooth and not require much change in the application code. I am having a problem with getting the value of a field object in .NET. I need to know what the value of the field on the form is so I can use it in my code. The 8.5 implementation was Field[someField].Field.Value, but that doesn't work now. Any suggestions are welcome...
Thanks in advance.

Hi;
I suggest you have a look at the following article on converting from the RDC to .NET:
http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/e0eb394f-931e-2b10-3b82-9413bfc3f457
To get the field value, however, you will need to use the RAS engine. See this article:
http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/d0479adb-6b3f-2b10-1e9c-eb81a15768e8&overridelayout=true
And the folllowing forum post:
how to get field value from a crystal 11.5 R2 .net report
Best Regards,
Jonathan

Similar Messages

How to print blank line on BIP template when the field has no value?

I have a BIP template like below and all these CHILDREN, NAME, GRAND_CHILDREN, NAME are fields arranaged in the template as a row.Reps can enter values in each of these fields for a max upto 3 rows. The first 2 rows have the values and the last is blank.
CHILDREN: NAME: GRAND_CHILDREN: NAME:
Son John Daughter Smith
Daughter Laura Son Kevin
In the third row since the fields have no values, the report print blank rows, but I want to delete that blank row and show only the rows(first 2 rows) that have values for the fields.
Does any one know how to get around this? Please help me to resolve this.
Thanks in advance,
RV

Thanks.Here is the sample XML. Fields that refer to are as follows:
Children: DependentDD1, DependentDD2, DependentDD3
Name: DependentFF1, DependentFF2, DependentFF3
Grandchildren: GrandchildDD1, GrandchildDD2, GrandchildDD3
Name: GrandchildFF1, GrandchildFF2, GrandchildFF3
<?xml version="1.0" encoding="UTF-8" ?>
- <ListofIO>
- <ListOfBipCustomerProfileReport>
- <Contact>
<FirstName>ROSCOE</FirstName>
<LastName>CLOUGH</LastName>
<LeadContactType />
<PartyTypeCode>Person</PartyTypeCode>
<PartyUId>XXXXXXXXX</PartyUId>
<PersonUId>XXXXXXXXX</PersonUId>
<PrivacyCode>Opt-Out: All Parties</PrivacyCode>
<RelationtoHousehold />
<SocialSecurityNumber>XXXXXXXXX</SocialSecurityNumber>
<UserType>Prospect</UserType>
- <ListOfA-FmrCustomerProfile>
- <A-FmrCustomerProfile>
<DependentDD1>Son</DependentDD1>
<DependentDD2>Daughter</DependentDD2>
<DependentDD3 />
<DependentFF1>John</DependentFF1>
<DependentFF2>Laura</DependentFF2>
<DependentFF3 />
<GrandchildDD1>Daughter</GrandchildDD1>
<GrandchildDD2>Son</GrandchildDD2>
<GrandchildDD3 />
<GrandchildFF1>Smith</GrandchildFF1>
<GrandchildFF2>Kevin</GrandchildFF2>
<GrandchildFF3 />
</A-FmrCustomerProfile>
</ListOfA-FmrCustomerProfile>
</Contact>
<Login>A482003</Login>
</ListOfBipCustomerProfileReport>
</ListofIO>

Mass changes of Material Master field with different values

Hi,
How to change a field in Material Master for more than thousand materials. I think MM17 can only be used for mass changes of materials with same values. I need to upload different values for different materials. Is there any other way to do this.
Thanks,
K R Vishnu Kumar

Hi Kumar.
I think you have to use LSMW for mass updation for Material Master fields with different values.
Regards,
Rahul.

Not getting field value in Input field of field exit

Hi all
I am using field exit for data element GWLDT in transaction code IE02. But in this field exit I am not getting the value entered in the field "Begin guarantee date(GWLDT)" in the INPUT field of field exit.How I can get the value in the INPUT field of field exit?
Regards
Deepak

Use this statement in source code.
output = input.

This field contains duplicate values. Remove all duplicate values and try the operation again.

Greetings Everyone,
I am getting the follow up errors: "This field contains duplicate values. Remove all duplicate values and try the operation again."
when I tried to make the field "Claim Number" from the list in site collection library. See the screen below:
1- I selected on the "List" and I clicked on the list name
"Claim Tracking Report"
2- After I clicked on the list name then I went to the ribbon and selected list setting to choose Enforce Unique for the Field Column
"Claim Number"
3- Then I went down and selected
"Yes" to Enforced the Unique for the Field Column "Claim Number".
4- Then after I clicked "Yes" I got the error
"Sorry, something went wrong. This field contains duplicate values. Remove all duplicate values and try the operation again." But I don't have any duplicates values Items, because I had them removed before I tried
to Enforce the field column values to Unique. Can someone help or provide me a suggestions on how I can solve this issue please. Thank you
FYI: I am using a Nintex Workflow

Hope this is a list, how many total items are there?
Please try to open this list as access(link in IE) and run this query in access
SELECT Claim.[Claim Number], Count(*) AS Expr1
FROM Claim
GROUP BY Claim.[Claim Number]
HAVING (((Count(*))>1));
Hope it will show something! if this does not show you dups then better to create a separate list and migrate items after configuring unique column.
Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

How to get field and variable value in oracle

Hi all,
I'm finding very difficulty to get a field value.. In oracle 11i form there is a field name called total accured and it has value 519.. but i'm not able get this .i search in all tables so iwent to help--> tools-->examine--(diagnostic)-->
i get Block :'XYZ' field: "Balance" and value:'519' and search in table shown in help.
Please can anyone help me to get this field and it's value. it is in HRMS.
Thank You

It may be a derived / calculated field, which is why you might not be finding it in a table.
For information on the last query run (may give a clue) do help -> examine, then change block to "SYSTEM" and Field to "LAST_QUERY".
Also, Help -> Record History will show you the table or view that the data comes from. May also lead to a clue.And this is what is mentioned in the doc referenced above.
Thanks,
Hussein

Flat file should have source field name and value

Hi Friends
I have a scenario of Idoc to Flat file , where in the target structure the field name and value should be present, generally only the value is available in a flat file.The target structure is as below:
for e.g RECTYPE is the Field Name and A is the value.
RECTYPE,A
DATEH,20111101
TIMEH,173125
RECTYPE,B
ORDNUM,4500054536
ORDITM,150
SUPDAT,20090218
PLNQTY,000000006
MATNR,14B300
BATCH,5697
PLANT,3026
DELIVTYPE,PO
SUPPLIER,0000023305
SUPNAME,Deutsche BP AG
SUPADRS,Erkelenzer Strasse 20
SUPCITY,Monchengladbach
SUPPOST,41179
SUPCOUN,DE
TRUCK_NBR,7589
BOND_FLG,X
STG_LOC,PLCL
LINE_ACTION,CRE
RECTYPE,B
ORDNUM,4500056721
ORDITM,10
SUPDAT,20090218
PLNQTY,000000013
MATNR,116703
BATCH,6589
PLANT,3026
DELIVTYPE,PO
SUPPLIER,0000023380
SUPNAME,DOW Belgium NV
SUPADRS,Havenlaan 7
SUPCITY,Tessenderlo
SUPPOST,3980
SUPCOUN,BE
TRUCK_NBR,7589
BOND_FLG,X
STG_LOC,PLCL
LINE_ACTION,CHG
RECTYPE,X
DATEH,20111101
TIMEH,173125
RECORDS,3

Hi,
     NameA.addHeaderLine
Specify whether the text file will have a header line with column names. The following values are permitted:
■       0 u2013 No header line
■       1 u2013 Header line with column names from the XML document
■       2 u2013 As for 1, followed by a blank line
■       3 u2013 Header line is stored as NameA.headerLine in the configuration and is applied
■       4 u2013 As for 3, followed by a blank line
This specification is only permitted if exactly one structure is defined.
regards,
ganesh.

Can "SPML Web Service Complex Data Type field" take multiple values ?

In Generic Technology Connector's -SPML design parameters section, Can we give multiple values in SPML Web Service Complex Data Type field?
If not, how can i call methods directly instead of calling them through a values of the "name" attribute of the "complexType" element in SPML Web Service Complex Data Type?
I need 'SPML Web Service Complex Data Type' to hold multiple values.And based on the request it has to initiate appropriate method of action.
Presently i have three methods add,modify and delete which i am calling through a single value of the "name" attribute of the "complexType" element in SPML Web Service Complex Data Type.
I want to replace this single value with multiple menthods , so that a direct interaction between the method,OIM and target can be established.
Edited by: 821054 on 16/02/2011 04:23

Thanks Robert.
You'll need to create your own interface to the webapp database for those kind of data operations
by this, are you speaking of the internal BC database which stores web app schema data? That would be great if it were possible to update that programmatically because I need to use the List (Checkbox List) field type (for the search functionality), but I need to supply the checkbox options from a web app rather than by manually updating the list entered in the Fields view of the web app settings (shown below).
I'm curious if anyone else has tried this?
Again, my reason for needing to use the List (Checkbox List) field type is that the page which processes searches knows to expect a comma separated list for this field type and then appears to be parsing out the individual values for searching out web app items with 1 or more matching values. You're right that text fields (string and multiline) just check for 'string contains' matches, and this would be ok if I was only ever needing to search just one value at a time. Here's an example of what I might do:
Web App item field value (as recorded against the List (Checkbox List) field type:
8294877,8294878
Web App Search value (for this same field):
8294879,8294877,8294885
The search would return this web app item because the field contains 2 (1 or more) individual values even though they were entered into the search field in a different order. If this web app item were just a Text (string or multiline) field, the searched value is not a substring of the web app item's stored value, so it would not find a match. Hence the need to use Checkbox List field type.
The web app will have thousands if not 10s of thousands of records, so dumping them all into one big array or object and searching on the front-end won't be practical (though it works great on smaller datasets).

Populating Multirecord text fields from Tlists value's combinations

I have a UI wherein there are two T lists, one on the Left and other on the Right. The left one contains
From values and the Right one contains To values. There's one Button which when Pressed should populate
a Data Block which has multi record text fields just below the button with all the possible combinations of
the T lists elements. The Text fields have the values From, To, Time, Unit. When populated From and Two will
get the values from the combinations and the user will enter the values in other fields i.e. Time and Unit,
Then the user can save the Records.
e.g. If the Left T list contains Red, Blue and the Right T List contains Green, Black. Then on pressing
the button below the T lists, the text fields From and Two of a data block displayed in the same window
should get populated with all the possible combinations as:
From || To || Unit || Time
Red Green
Red Black
Blue Green
Blue Black
Now the user can enter the values for Unit as well as Time and when he does save the Records should be inserted
for the Data Blocks DML Source that's some table.
What I'm trying is:
On pressing the Button i'm writing code that will have Two PL/SQL Tables(Index by binary_integer). One will have
all the values of the left T List and the other with all the values of right T List.
I do it as in the WHEN BUTTON PRESSED as:
DECLARE
TYPE varchar_table IS TABLE OF VARCHAR2(30) INDEX BY BINARY_INTEGER;
from varchar_table;
to varchar_table;
v_count1 NUMBER;
v_count2 NUMBER;
v_count3 NUMBER;
v_count4 NUMBER;
BEGIN
v_count1 := Get_List_Element_Count('CONTROL.FROM_TYPE');
     FOR i IN 1..v_count1 LOOP
          from(i) := Get_List_Element_Value('CONTROL.FROM_TYPE', i);
     END LOOP;
v_count2 := Get_List_Element_Count('CONTROL.TO_TYPE');
     FOR i IN 1..v_count2 LOOP
          to(i) := Get_List_Element_Value('CONTROL.TO_TYPE', i);
     END LOOP;
END;
Now how will I populate the text fields with the values in the tables that i got with the piece of code above.
Any help would be appreciated. Any other method other than the one i'm trying is also welcome. Please note that
i'm not using any table to store the elements in the T Lists. The lists get values at runtime by
user's selection.
Thanks,
Abhishek.

Try and stay civil in your postings. The solotion should be to simply issue a GO_BLOCK, followed by a CREATE_RECORD followed by setting the approriate values :block.value = <value from list>

MS SharePoint 2010 Designer Workflow Email - Enhanced Rich Text Field look-up values on HTML email have large spaces

MS InfoPath 2010 form with RTF (Rich Text Fields)
MS SharePoint 2010 Custom Library
MS SharePoint 2010 Designer Workflow Send Email
http://office.microsoft.com/en-us/sharepoint-designer-help/send-e-mail-in-a-workflow-HA010239042.aspx
https://www.nothingbutsharepoint.com/sites/eusp/pages/creating-html-emails-with-spd-workflows.aspx
Hi all of the above work, our question is how to control the RTF (Rich Text Field) look up values to the InfoPath 2010 form in the HTML email?
How to FORMAT the RTF look up value? in the HTML email
EXAMPLE
we have a InfoPath 2010 form published in the SharePoint 2010 custom list library there are 5 RTF fields (Notes1, Notes2, Notes3, Notes4, Notes5) there are other plain text fields, date fields, and other field types in the form
We use a HTML table to make the email look like the InfoPath form, so when the users fill out the form and they get the email notification everything looks the same.
Our problem is the EXTRA LINE SPACE in the RTF look up values
We want to remove any leading spaces, and line spaces between HTML table cells
Our Workflow has the HTML in a Workflow variable, as you know it does not support remote CSS it has to be in-line style for any formatting we want all cells to have
valign="top" the email should align at the top of the cell, all field types do except the RTF look up values they make the email look bad and they contain a lot of white space.
Please test this in your enviroment
<table>
<tr><td>Title:</td><td>[%Current Item:Title%]</td><td>[%Current Item:Notes1%]</td></tr>
<tr><td>Created by:</td><td>[%Current Item:CreatedBy%]</td><td>[%Current Item:Notes2%]</td></tr>
<tr><td>Date Created:</td><td>[%Current Item:Created%]</td><td>[%Current Item:Notes3%]</td></tr>
<tr><td>Modified by:</td><td>[%Current Item:ModifiedBy%]</td><td>[%Current Item:Notes4%]</td></tr>
<tr><td>Date Modified:</td><td>[%Current Item:Modified%]</td><td>[%Current Item:Notes5%]</td></tr>
</table>
I could not update the question below to the proper forum section. that is why i am asking again.
http://social.technet.microsoft.com/Forums/en-US/a7918bfb-9166-4bdb-828c-132a0c7611e3/ms-sharepoint-2010-designer-workflow-emails-huge-lines-paces-in-rich-text-fields-values-from-ms?forum=sharepointcustomization
-Isaack

Hi IssackB,
perhaps you may try this article:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/f8fa2a11-9f74-4dd2-b277-21ce872fdcb2/can-we-add-rich-text-editor-to-the-sharepoint-designer-2010-workflow?forum=sharepointcustomizationprevious
there are some notes that perhaps you may check:
Use the same font for all the controls to ensure consistent spacing between rows.
Choose Size from the Format menu, and then choose To Fit from the menu that appears. This adjusts the size of each control, depending on the font set for the data that appears
in the control.
NOTE: The Print Preview and Output To commands use different algorithms for calculating text width; therefore, the text may occupy more or less
space in the RTF file.
Reduce the amount of blank space above and below the report controls. Any vertical
space between the controls is converted to whole lines
in the RTF file. For example, a
space of .02 inches can increase to .1667 inches in the
RTF file.
Make sure controls on the same output row are not too close to each other or overlapping. This can cause the Output To command to omit the controls or to align the columns incorrectly
in the RTF file.
Use the Align command from the Format menu to ensure that a row of controls is aligned properly on the report. If a row of controls is not aligned properly, the Output To command may place the controls
in different rows, causing extra blank
spacein the RTF file.
and please have a check there are updates for exchange 2013 and will be available with the upcoming release of CU4 for Exchange 2013, that stated the format rtf was saved instead HTML. http://support.microsoft.com/kb/2862739/en-us
Regards,
Aries
Microsoft Online Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Finding fields having different values

Hi
There are two internal tables with same structures, each holding single record. However, the values of those records are different.
I need to find out the fields in which the values are different.
How can I perform this.
Could any one help?
Thanks
Divya

Hello Divya
You could do a field-by-field comparison, e.g.:
" Read single record of each itab into work area
FIELD-SYMBOLS:
<ld_fld1> TYPE ANY,
<ld_fld2> TYPE ANY.
DO.
ASSIGN COMPONENT syst-index OF STRUCTURE ls_record1 TO <ld_fld1>.
ASSIGN COMPONENT syst-index OF STRUCTURE ls_record2 TO <ld_fld2>.
CHECK ( syst-subrc = 0 ). " assign worked
IF ( <ld_fld1> NE <ld_fld2 ).
ENDIF.
ENDDO.
Or you may use a more generic approach which will work for all records of itabs having the same structure. This approach gives you new, modified and deleted records: [Comparing Two Internal Tables - A Generic Approach|https://wiki.sdn.sap.com/wiki/display/Snippets/ComparingTwoInternalTables-AGeneric+Approach]
Regards
Uwe

Change "to equal" to "to be greater than" in Wait for Field to equal Value"

In Sharepoint Designer 2010, in the workflow Action "Wait for Field to equal Value", I could change the "to equal" to "to be greater than". I can't find how to do this in SPD 2013.
Can someone please help?
Thank you!

Hi
PieterVanHeerden, is a big problem that gives us the change Microsoft . An option to mitigate this problem could be to use an additional workflow that runs whenever the item is updated . Workflow evaluate the condition that you need and when it is Ok, updates
the value of a field used as flag called eg " Control_Hora_Inicio_Completo " with " true " value.
In your current workflow you should modify the condition for the WorkflowF stops until the Control_Hora_Inicio_Completo field equal to " True " when it meets the Workflow continue and you're sure you have entered a value , whatever that is .
I hope you can try and you work.
Greetings from Argentina .
Maxi
Msorli

How to count rows in a group =Count(Fields!FirstName.Value,"GroupByInitial")

I have a tablix grouped on column a and detailed on column b.
I am trying to count the rows in 3 separate ways.
CountDistinct(Fields!A.Value) =work perfectly on group column
CountDistinct(Fields!B.Value) = work perfectly on the detail column
But now I was
Count(Fields!A.Value) = on the group column but I get all the detailed count 13 instead of just the group count of 4.

Hi Giss68,
Based on my understanding, you want to calculate the count of the group fields, right?
In your scenario, if you use Count(Fields!A.Value), the expression returns a count of specified values evaluated in the dataset scope. So it’s expected that you get count of all Fields!A.Value instead of grouped fields. Since you want to calculate the count
of grouped column fields, you should use CountDistinct() function.
As we tested in our environment, we specify the expression with CountDistinct() function, we can get expected result.
Reference:
Count Function (Report Builder and SSRS)
CountDistinct Function (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

Searching Web Apps with Data Source fields containing multiple values

I have a Web App with a field allowing multiple values to be entered similar to the checkbox list. I need to restrict allowed values to a large, finite list of values currently stored in another Web App as the data source. I can't apply the Data Source field type as that only allows single value selection. I also need to be able to use the Web App Search form to search for items containing 1 OR more values in this field (the search functionality of a checklist field type). Here's what I've tried for field types:
Text (string) or Text (multiline) field type - By saving a list of comma separated values (the same way that checkbox list outputs) to a text input or textarea, the search logic only searches for exact string (including commas) and doesn't parse the individual values.
List (checkbox list) field type - This allows me to search multiple values using OR logic, but the web app will only store values that have been entered as options in the actual web app field setup. I tried using a checkbox list with minimal or empty options hoping that whatever values I sent over in a comma separated string value would still get stored, but because the values came from my Web App data source and not the list of options stored with the field, they were not saved.
Has anyone found a way to do this?
My other question is about how I might use a similar multi-value field as described above but return search results containing items with ALL selected values for that field (AND logic).
Can anyone enlighten me to the inner workings of BC web app search logic?

Thanks Robert.
You'll need to create your own interface to the webapp database for those kind of data operations
by this, are you speaking of the internal BC database which stores web app schema data? That would be great if it were possible to update that programmatically because I need to use the List (Checkbox List) field type (for the search functionality), but I need to supply the checkbox options from a web app rather than by manually updating the list entered in the Fields view of the web app settings (shown below).
I'm curious if anyone else has tried this?
Again, my reason for needing to use the List (Checkbox List) field type is that the page which processes searches knows to expect a comma separated list for this field type and then appears to be parsing out the individual values for searching out web app items with 1 or more matching values. You're right that text fields (string and multiline) just check for 'string contains' matches, and this would be ok if I was only ever needing to search just one value at a time. Here's an example of what I might do:
Web App item field value (as recorded against the List (Checkbox List) field type:
8294877,8294878
Web App Search value (for this same field):
8294879,8294877,8294885
The search would return this web app item because the field contains 2 (1 or more) individual values even though they were entered into the search field in a different order. If this web app item were just a Text (string or multiline) field, the searched value is not a substring of the web app item's stored value, so it would not find a match. Hence the need to use Checkbox List field type.
The web app will have thousands if not 10s of thousands of records, so dumping them all into one big array or object and searching on the front-end won't be practical (though it works great on smaller datasets).

FormsCentral - design form : Initialize form field with default value

Hello,
My customer asks me to initialize text fields with default values. Example , Name , email , phone number etc to be displayed by default till it is overwritten by values entered. Could you please guide me how to achieve this ?
Many Thanks,
Sree

Hi,
see Re: sequencing problem-Forms
Regards Michael

Fields[i].Field.Value in C#

Similar Messages

Maybe you are looking for