File Monitoring tool

Dear All
I know that might question might be answered somewhere but i don't know which keywords I should use, a kind guide line is highly appreciated, simply I need to monitor a file progress and draw a graph using the file data.
the file structure looks like
2010-05-17 22:24:44 10,20,3
2010-05-17 22:24:45 30,22,1
2010-05-17 22:24:46 8,3,0
As you can see this a log file and it's updated each second so i need a tool that monitor the file and create a second by second colored graph indicating the different 3 values by 3 different colors on the Y-Axis and the Time stamp on the X-Axis
I was thinking about using MRTG but i found that it integrates with SNMP interfaces only, so can you give me some hints, tools or even possible keywords
Thanks
Roby

You would have to write a program to feed to "Google Chart API". Or you could open in an editor find and replace the spaces with a tab character and same with the commas and then paste to a spreadsheet.

Similar Messages

Messages are Holding in message monitoring tool

Hi All,
I am facing the problem with messages which are in holding state.
My scenario is file to proxy. The file content contains of EDI. my scenario is already gone to production last year.
and its working fine. Used java mappings for validation of EDI file. its running successfully.
where as in Dev system till october first i used to load the files in FTP inbox folder and messages were processed successfully.
But from october first week when i load the files in FTP inbox, file has been picking succesfully and can see the logs in sender comm channel but the i can see that my interface is in holding state in message monitoring tool and its not going to receiver comm channel. I have loaded 5 files and all are in holding state.
even i have cancelled first error message and tried to resend the next message swhich is in holding state, but this is not happening.
i am using EOIO queue.
when i cancel the error message remaining messages should processed automatically but its not getting processed here.
sequencing of the interface triggering is
1. Interface_1
2. Interface_2
3. Interface_3
4. Interface_4
Here i am stucking up with the first interface itself.Here only first interface is in holding state.
can any one advise what could be the problem..
I m on SP 10.
Thanks,
Bhaskar

Hi Abhijit,
Even after unchecking the checkbox maintain order at runtime, its not working.
i think there is no disturbed in message processing sequence.
my first sender interface itself going into hold state.
i have cancelled the hold message, even after that remaining messages are processing automatically.
and also i could not fine any messages in SMQ1 and SMQ2.
I also deresister and registered te queues and activated.
Kindly advise what would be the problem..
in production its working fine and development its not working fine.
Thanks,
Bhaskar

Managed Server Monitoring tools for WLS 8.1 on linux

Our organization uses a set of locally written shell scripts to monitor the status of the managed servers in a WLS 8.1 domain installed on RedHat Linux 4, update4.
The main monitoring script uses the output of the "ps" and "netstat" commands to determine the process-id, server name, and tcp ports used by each managed server.
It is able to determine the name of the managed server by parsing the value of the "-Dweblogic.Name" parameter from the command line of the java command that launches the jvm that represents the managed server.
When a managed server is started, the command line resembles the following:
java \
-DLotsofVariables \
-classpath LotsofCpElements \
-Djava.security.policy==PolicyFile \
-Dweblogic.Name=NameOfMgdServer
The maximum number of characters displayed by the "ps" command with the wide (-w) option is 4096.
A recent addition to the class path has increased the length of the command line, resulting in the "NameOfMgdServer" being truncated.
It now appears similar to the following:
java \
-DLotsofVariables \
-classpath LotsofCpElements \
-Djava.security.policy==PolicyFile \
-Dweblogic.Name=NameO
This breaks our monitoring script because it is looking for a managed server named "NameOfMgdServer", not "NameO".
Each managed server is monitored by the WLS administration server and the local node manager.
Is there a way to restructure or rewrite the command line used to launch the managed server java jvm such that the "-Dweblogic.Name=NameOfMgdServer" appears before the specification of the classpath?
I can find no mention of the "-Dweblogic.Name" parameter on the "Remote Start" tab corresponding to each managed server, so it appears that WLS is building the java command line internally based on the contents of the config.xml file, before launching the managed server process.
I've considered adding an additional parameter to the java command line preceding the specification of the classpath, simply to identify the identity of the managed server, but I don't like this type of hack.
Perhaps someone else has developed a similar monitoring tool, and could provide some advice?
Any feedback is appreciated

Our organization uses a set of locally written shell scripts to monitor the status of the managed servers in a WLS 8.1 domain installed on RedHat Linux 4, update4.
The main monitoring script uses the output of the "ps" and "netstat" commands to determine the process-id, server name, and tcp ports used by each managed server.
It is able to determine the name of the managed server by parsing the value of the "-Dweblogic.Name" parameter from the command line of the java command that launches the jvm that represents the managed server.
When a managed server is started, the command line resembles the following:
java \
-DLotsofVariables \
-classpath LotsofCpElements \
-Djava.security.policy==PolicyFile \
-Dweblogic.Name=NameOfMgdServer
The maximum number of characters displayed by the "ps" command with the wide (-w) option is 4096.
A recent addition to the class path has increased the length of the command line, resulting in the "NameOfMgdServer" being truncated.
It now appears similar to the following:
java \
-DLotsofVariables \
-classpath LotsofCpElements \
-Djava.security.policy==PolicyFile \
-Dweblogic.Name=NameO
This breaks our monitoring script because it is looking for a managed server named "NameOfMgdServer", not "NameO".
Each managed server is monitored by the WLS administration server and the local node manager.
Is there a way to restructure or rewrite the command line used to launch the managed server java jvm such that the "-Dweblogic.Name=NameOfMgdServer" appears before the specification of the classpath?
I can find no mention of the "-Dweblogic.Name" parameter on the "Remote Start" tab corresponding to each managed server, so it appears that WLS is building the java command line internally based on the contents of the config.xml file, before launching the managed server process.
I've considered adding an additional parameter to the java command line preceding the specification of the classpath, simply to identify the identity of the managed server, but I don't like this type of hack.
Perhaps someone else has developed a similar monitoring tool, and could provide some advice?
Any feedback is appreciated

Adobe Active File Monitor V12 will not start/ program crashes & other errors

I have recently installed Version 12 of Photoshop Elements on Windows XP Pro (service pack 3).
If I try to specify "Watched Folders" PE tells me to start the Adobe Active File Monitor in Admin Tools - Services.
If I try to manually start this service it reports that:
"Could not start the Adobe Active File Monitor V12 service on local computer Error 1067. The process terminated unexpectedly"
If I look at the Event Viewer in XP there are numerous errors reporting that this service has attempted to start automatically with the following error:
Event Type: Error
Event Source: Application Error
Event Category: (100)
Event ID: 1000
Date: 30/11/2013
Time: 17:53:01
User: N/A
Computer: NICOLA
Description:
Faulting application PhotoshopElementsFileAgent.exe, version 12.0.0.0, faulting module unknown, version 0.0.0.0, fault address 0x73657275.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 41 70 70 6c 69 63 61 74   Applicat
0008: 69 6f 6e 20 46 61 69 6c   ion Fail
0010: 75 72 65 20 20 50 68 6f   ure Pho
0018: 74 6f 73 68 6f 70 45 6c   toshopEl
0020: 65 6d 65 6e 74 73 46 69   ementsFi
0028: 6c 65 41 67 65 6e 74 2e   leAgent.
0030: 65 78 65 20 31 32 2e 30   exe 12.0
0038: 2e 30 2e 30 20 69 6e 20   .0.0 in
0040: 75 6e 6b 6e 6f 77 6e 20   unknown
0048: 30 2e 30 2e 30 2e 30 20   0.0.0.0
0050: 61 74 20 6f 66 66 73 65   at offse
0058: 74 20 37 33 36 35 37 32   t 736572
0060: 37 35                     75
In addition the Photoshop Organiser crashes frequently and If I edit a picture and save it to the stack, it does not appear in the catalogue so I have to manually get the picture and stack it with the original. I assume that these problems are related to the above problem.
My original installation co-existed with Version 3 so I uninstalled this old version then uninstaled and reinstalled version 12. This made no difference to the problem.
Any ideas on this problem?

Thanks for that suggestion Michel.
Killing the AutoAnalyzer using these instructions (http://barbarabrundage.com/2013/10/31/the-elements-12-auto-analyzer-adobes-evil-undead/doe s ) does seem to have solved the problem of edited pictures not being saved to the stack - although I have noticed that since disabling the autoanalyzer, when saving a file, the editor almost always now does not display the option window which allows you to choose if you want to save with the stack etc. It usually only shows the JPEG quality selector window.
Its too early for me to say if making this change has reduced the frequency of crashes but it certainly has not solved the problem with the Watched Folders so Im still looking for a solution to this one.

Active file monitor adobe

I can't find and open service "the active file monitor Adobe". Not present in the services part from the configurations.

If you invoke File > Watch Folders and get the error message “The Watch Folder Service is unavailable”, restart the file-monitor service:
Go to the Windows Control Panel > Administrative Tools > Services, select “Adobe Active File Monitor vx” (substitute your pse version number for x). Right-click Properties, make sure Start Type is set to Automatic. Then click Start.
The Active File Monitor service is supposed to be always running, but for some unknown reason, it sometimes gets configured to not run.

Which Monitoring Tool is best to monitor LAN and WAN

Hi,
CAN ANYONE TELL ME Which Monitoring Tool is best to monitor LAN and WAN.
Waiting for immediate response.
Thanks
Irshad

To start with HP open, this is SNMP-based as well. As it is around for quite a while and delivers support for many vendors, it has become sort of an industry standard. Many other vendors deliver add-ons (even CiscoWorks) to support their products via HP open. That functionality however comes with a price. If you have plenty of money an a large network to manage, HP open might be your best choice.
Cisco Works and other -start-with-C- products are typically used to manage Cisco devices. If you have a fair share of non-cisco boxes around you will find that you cannot see or do everything with them that you might want.
One special thing about CiscoWorks is that it lacks a grapical real-time overview of the network. In my opinion this is a weakness in the product. On the other hand, it has many nice features to manage all kinds of Cisco devices.
My ideal solution is to use both a generic SNMP manager, SNMPc in my case, and CiscoWorks 2000. With SNMPc I can quickly see network node status and do some bandwidth management (baselining). CW2k serves mainly to execute changes (NetConfig) and as a syslogger. It is also used to perform IOS upgrades and to store config files.
I guess this could be done with HP open as well, but our money does not reach far enough to pay for both. SNMPc costs a lot less, both in purchase and in maintenance.
Hope this clarifies things a bit.
Regards,
Leo

Monitoring Tool : sje-systems

Hi,
Whether anybody using monitoring tool of sje-systems for weblogic 8.1.
http://www.free-administrator.com/Oracle-Weblogic-8.1-Monitor?n2123375857=119
http://www.sje-systems.com/
Please provide your inputs for any similar free tools for weblogic monitoring.

Hi
SAPMSG.INI file only for SAP systems, for non sap systems monitoring data exclusively pushed by the local agents
for detail please refer under [http://service.sap.com/monitoring|http://service.sap.com/monitoring]
Thanks,
Jansi

Monitoring Tool for Oracle

hai all ,
my company ask me about tools to monitoring oracle .
tools can have capability to monitor :
Response Time
User Activity
Status
Table Space Usage
Table Space Details
Table Space Status
SGA Performance
SGA Details
SGA Status
Performance of Data Files
Session Details
Session Waits
Buffer Gets
Disk Reads
Rollback Segment
Queries, Locks
and others
there's anyone have idea or suggets what tools is ?

Imron Siagian wrote:
hai all ,
my company ask me about tools to monitoring oracle .
tools can have capability to monitor :
Response Time
User Activity
Status
Table Space Usage
Table Space Details
Table Space Status
SGA Performance
SGA Details
SGA Status
Performance of Data Files
Session Details
Session Waits
Buffer Gets
Disk Reads
Rollback Segment
Queries, Locks
and others
there's anyone have idea or suggets what tools is ?Oracle Grid Control
http://www.oracle.com/technetwork/oem/grid-control/overview/index.html
OEM
http://www.oracle.com/us/products/enterprise-manager/index.html
Oracle Application Management Pack
http://bit.ly/IOu5cD
Oracle Database Monitoring Tools
http://bit.ly/IOucF0
Thanks,
Hussein

"wsnmp Monitor Tool" in BusinessObjects XI R2 ??

Post Author: itsmeraghu
CA Forum: Administration
Hi Forum,
I work on BO 6.5.1 and use "wsnmp Monitor Tool" to monitor for BO logs and it scans the Business Objects logs and raises SNMP traps based on its configuration file( wsnmp.ini) and sends to NetIQ.
What my question is: Does BusinessObjects XI R2 has "wsnmp" tool (or) any new tool which monitors BO logs and raises SNMP traps ??
Thanks in advance...Raghu

I dont believe there will be, but I have not seen anything official on the matter so who knows.
If it happens it will be in a Service Pack so the only thing I can say it to keep an eye out for the next one and see if it is listed in the supported platforms doc for it.

Oracle EPM 11.1.2.1 Monitoring tools

Gurus,
could you please let me know what are the available system monitoring or performance monitoring tools for oracle EPM 11.1.2.1 or in case licenses are involved what are the best key areas for manual procedures to monitor the system?
Many thanks !

Hello,
Monitoring is a broad term. There are many 3rd party tools available that can provide monitoring, it all depends on what exactly you're looking for.
Oracle has a document on setting up Oracle Enterprise Manager to monitor Hyperion Applications: http://www.oracle.com/technetwork/middleware/bi-foundation/sys9-oem-integration-1-129287.pdf. For performance monitoring, you can also look at this: https://blogs.oracle.com/pa/entry/epm_11_1_2_how3. This will basically connect to the JRockit JVM and look at the performance for the web application.
If you want to do more monitoring (services, servers, processor, CPU), you can look into Hyperic HQ: http://www.hyperic.com/. They have both an open source version and an enterprise version. I've used the open source version myself and it is pretty good and plays well with Windows. You can see many metrics, graphics and information via the web based application. You can also setup email alerts on certain activities (service stop, service start) and also monitor website availability. For being an open source software, I think it offers alot and it is very reliable.
Again, these are just a few suggestions. There are many tools out there that can accomplish what you're looking for.
Regards,
Luis

File Monitor - Not working properly on SMB file share

The "File Monitor" does not trigger on SMB file share, i think this might be a bug.
I have tried the same "File Monitor" on a windows share, and it works like intended. However, when I use the same runbook on a Solaris SMB share, it does not trigger properly. It triggers when I delete or rename a file, but not any thing else (like
create, changed, etc) I have turned all the triggers on just to see what actually makes it trigger...
I'm using specified authentication (domain user and password)
The SMB folder is shared on a Solaris (SunOS 5.10).
Can anyone confirm that they also have this problem?
Is there a patch to fix this? Thanks.

Can someone please verify that they also have this problem?
Thanks.

I accidentaly hit a setting to hide my address bar and all my other buttons like "file" or "tools" and I cant figure out how to get them back. Now i cant even type in an adress to go to another website because there is no place to type it.

I accidentaly hit a feature that allowed me to hide everything on the top of my browser. Now All i have are the options of "most visited, Getting Started and Latest Headlines." I have no place to type in a website address, no options such as "file" or "tools" or even the back or refresh button. How do I return it to the original settings?

if you hid the menu bar and the navigation bar simply press the alt button, this will bring back the menu bar and form there you can right click and select which bars you want shown

Where can i check in the real time monitoring tool if there are active calls in progress?

where can i check in the real time monitoring tool if there are active calls in progress?

Hi
Selecting Call Manager -->Call Process ---> call activity
HTH
Regards
Carlo

My location bar, tool bar (file, edit, tools, bookmarks, help) disappeared and cannot be restored. I have no back button, home button etc. the top of the screen is just an empty blue bar. Internet still works if I click on a hyperlink on the main page.

My location bar, tool bar (file, edit, tools, bookmarks, help) all disappeared and cannot be restored. I have no back button, home button etc. the top of the screen is just an empty blue bar. Internet still works if I click on a hyperlink on the main page.
The problem started when I turned on the computer this morning. I tried to install Mozilla 4 from your website and that installed but I still have nothing on the top.

It may be due to Firebug. Seeing as how you're a web developer, it's very possible you have this installed. The latest version, 1.7X a10, appears to cause everything you described. I downgraded to "a8" and that seems to have fixed everything.
I also recreated a profile from scratch before trying this out, so I can't guarantee it's definitely Firebug.
Similar issue: https://support.mozilla.com/en-US/questions/783078
edit: If you go to the Firebug forums, you'll see this is now a known problem. http://code.google.com/p/fbug/issues/detail?id=4012 for the issue tracker.

Where can I download adobe File Packager tool for Windows?

Dear all,
I need to understand the detail format of f4f files, but the only useful information I can find is the following:
http://www.adobe.com/products/httpdynamicstreaming/pdfs/httpdynamicstreaming_wp_ue.pdf
Is there more detail specification for f4f ?
Where can I download adobe File Packager tool for Windows?
It seems to me the following specification is not correct for f4f, at least the parts talking about "mdat" box
http://download.macromedia.com/f4v/video_file_format_spec_v10_1.pdf
Thanks,
Xuedong

As per your question – follow this link http://www.adobe.com/products/adobe-media-server-family.html, download and install AMS Starter, then inside \tools\f4fpackager you’d find the F4F packager command-line application.

File Monitoring tool

Similar Messages

Maybe you are looking for