File problems installing FLAC from source

Long after executing $sudo make install, I got an error. I Googled the error (make[2]: * No rule to make target `../../src/libOggFLAC/libOggFLAC.la', needed by `test_seeking'. Stop.) and then did a find (searching the entire drive as root) and it seems that the file in the aforementioned path (libOggFLAC.la) is actually not anywhere on my computer. There are many files in the directory it should be in, but not that specific one.
Any clues? I downloaded the package with Fink, which has only ever been reliable. Weird.
Oh, and, yes: I did run ./configure, too

amicrawler - i am now on Tiger and have gcc 4.0 installed and selected.
I'll give that a shot, thanks.

Similar Messages

Install stuffs from source

I try to install mplayer from source, after it done i hit mplayer, command not found. After that i try to install tmsnc and its the same, command not found. I tried bsdsfv too, and there was an error:
make: /usr/bin/install: Command not found
make: *** [install] Error 127
I install these progs from source always, and it was succes always.

1.
[~] > pacman -Qo /bin/install
/bin/install is owned by coreutils 6.7-1
2.
Why the hell would you want to install mplayer from source? Arch often if not always has the newest stable (sometimes even unstable ) stuff in sensible yet reasonable tuned packages. It eludes me why you would want to compile mplayer yourself. If you need to, at least use ABS.
Other than that I must ask the same question iBertus already asked: are you even running Arch? Perhaps Gentoo is more to your liking.

Installing Software from Source

This question might sound a little bit retarded, but I'm just starting out, so I'd appreciate a little bit of help. I'm trying to install software from source, but it does not seem to work. Or at least, not for lynx, so I'm wondering if pacman is the only way of installing software on Arch (which I pretty much doubt).
I've downloaded lynx, unarchived it, went into its directory, and typed ./configure, followed by make and make check. Everything seemed OK, as I have even got the "Welcome to Lynx!" message. So I went on and typed sudo make install, and no errors occurred. But when I tried launching it with lynx, it said the command is not found. What am I doing wrong?
Also, one more thing: when I loose the prompt, how do I get it back? I mean, like this (http://bit.ly/4tkurS)
Thanks in advance!
Last edited by XLR3204S (2009-12-01 15:01:04)

XLR3204S wrote:Thing is, I'm trying to learn my way around Linux, not specifically Arch Linux. I've got lynx through pacman before, but this time I wanted to get my foot wet with installing programs from source, as, in fact, I don't need lynx at all. I'll look more into it as soon as I get other things I want to built from source.
This isn't really arch specific. Installing from source without using the package system is a bad idea(tm) on (almost) any distro. Only the method used to create a package differs.
Edit: not that you "learn GNU/Linux" by compiling anyway. The best way to learn GNU/Linux is just to use it, and to read. There are several good books on the kernel, init systems, userland basics and so on.
Last edited by Mr.Elendig (2009-12-01 17:30:51)

[solved]Problem compiling alsa from source

I'm trying to install alsa-driver-1.0.18a from source because I need to compile it with snd-virtuoso. So I run "./configure --with-cards=virtuoso --with-sequencer=yes" then when I run "make" I get this at the end of it.
make -C /lib/modules/2.6.27-ARCH/build SUBDIRS=/usr/src/alsa/alsa-driver-1.0.18a CPP="gcc -E" CC="gcc" modules
make[1]: Entering directory `/usr/src/linux-2.6.27-ARCH'
CC [M] /usr/src/alsa/alsa-driver-1.0.18a/acore/memory_wrapper.o
In file included from /usr/src/alsa/alsa-driver-1.0.18a/acore/memory_wrapper.c:25:
/usr/src/alsa/alsa-driver-1.0.18a/include/adriver.h:282:1: warning: "GFP_DMA32" redefined
In file included from include/linux/kmod.h:22,
from include/linux/module.h:13,
from /usr/src/alsa/alsa-driver-1.0.18a/include/adriver.h:57,
from /usr/src/alsa/alsa-driver-1.0.18a/acore/memory_wrapper.c:25:
include/linux/gfp.h:105:1: warning: this is the location of the previous definition
In file included from /usr/src/alsa/alsa-driver-1.0.18a/acore/memory_wrapper.c:25:
/usr/src/alsa/alsa-driver-1.0.18a/include/adriver.h:831: error: static declaration of 'jiffies_to_msecs' follows non-static declaration
include/linux/jiffies.h:286: error: previous declaration of 'jiffies_to_msecs' was here
/usr/src/alsa/alsa-driver-1.0.18a/include/adriver.h:850: error: static declaration of 'msecs_to_jiffies' follows non-static declaration
include/linux/jiffies.h:288: error: previous declaration of 'msecs_to_jiffies' was here
In file included from /usr/src/alsa/alsa-driver-1.0.18a/include/adriver.h:948,
from /usr/src/alsa/alsa-driver-1.0.18a/acore/memory_wrapper.c:25:
include/linux/pci.h:627: error: expected identifier or '(' before numeric constant
In file included from include/asm/pci.h:4,
from include/linux/pci.h:989,
from /usr/src/alsa/alsa-driver-1.0.18a/include/adriver.h:948,
from /usr/src/alsa/alsa-driver-1.0.18a/acore/memory_wrapper.c:25:
include/linux/mm.h:261: error: conflicting types for 'snd_compat_vmalloc_to_page'
/usr/src/alsa/alsa-driver-1.0.18a/include/adriver.h:752: error: previous declaration of 'snd_compat_vmalloc_to_page' was here
In file included from /usr/src/alsa/alsa-driver-1.0.18a/acore/memory_wrapper.c:25:
/usr/src/alsa/alsa-driver-1.0.18a/include/adriver.h: In function 'snd_pci_orig_save_state':
/usr/src/alsa/alsa-driver-1.0.18a/include/adriver.h:1197: error: too many arguments to function 'pci_save_state'
/usr/src/alsa/alsa-driver-1.0.18a/include/adriver.h: In function 'snd_pci_orig_restore_state':
/usr/src/alsa/alsa-driver-1.0.18a/include/adriver.h:1201: error: too many arguments to function 'pci_restore_state'
In file included from /usr/src/alsa/alsa-driver-1.0.18a/acore/memory_wrapper.c:25:
/usr/src/alsa/alsa-driver-1.0.18a/include/adriver.h:1598:1: warning: "page_to_pfn" redefined
In file included from include/asm/page.h:196,
from include/asm/pda.h:8,
from include/asm/current.h:19,
from include/asm/processor.h:15,
from include/linux/prefetch.h:14,
from include/linux/list.h:6,
from include/linux/module.h:9,
from /usr/src/alsa/alsa-driver-1.0.18a/include/adriver.h:57,
from /usr/src/alsa/alsa-driver-1.0.18a/acore/memory_wrapper.c:25:
include/asm-generic/memory_model.h:78:1: warning: this is the location of the previous definition
/usr/src/alsa/alsa-driver-1.0.18a/acore/memory_wrapper.c: In function 'snd_compat_vmalloc_to_page':
/usr/src/alsa/alsa-driver-1.0.18a/acore/memory_wrapper.c:44: error: implicit declaration of function 'VMALLOC_VMADDR'
/usr/src/alsa/alsa-driver-1.0.18a/acore/memory_wrapper.c:49: error: incompatible type for argument 1 of 'pud_val'
/usr/src/alsa/alsa-driver-1.0.18a/acore/memory_wrapper.c:50: error: implicit declaration of function 'pte_offset'
/usr/src/alsa/alsa-driver-1.0.18a/acore/memory_wrapper.c:50: warning: assignment makes pointer from integer without a cast
make[3]: *** [/usr/src/alsa/alsa-driver-1.0.18a/acore/memory_wrapper.o] Error 1
make[2]: *** [/usr/src/alsa/alsa-driver-1.0.18a/acore] Error 2
make[1]: *** [_module_/usr/src/alsa/alsa-driver-1.0.18a] Error 2
make[1]: Leaving directory `/usr/src/linux-2.6.27-ARCH'
make: *** [compile] Error 2
edit: I tried compiling it on another computer and it was able too...not sure why mine wont. Although I do seem to remember possibly forgetting to uninstall it before making it again (after kernel upgrade)...I've tried multiple times to compile so far. Is there someway I can get a list of things to delete to manually remove all remnants of a previous install of alsa-driver?
Last edited by Gauvenator (2008-12-13 19:48:11)

Ok I ended up compiling the kernel from source for something else, so I tried compiling the alsa driver from source and it worked...maybe something was leftover in the previous kernel source directory that was causing problems.

Problem installing Mavericks from my recovery partition of my computer

I don't know what's going on but for some reason each and every time I try to install mavericks from my recovery partition I get an error saying "OSX Mavericks failed to download" , then the text underneath that said "Use the purchases page to try again". This creates a problem for me because I can not access the Mac AppStore since I whipped my MacBook clean with the os along with it and am trying to clean install mavericks. So I was wondering how do I fix this because I am beginning to get extremely ****** off and frustrated.

Hi
I want to install mac osx Mavericks on a seagate internal raw hard . I downloaded "RecoveryDiskAssistant" and install it in a usb drive, before installing I made partition for new harddisk , and I stadted to install it through internet without problem,
But after 10% it says: ""Use the purchases page to try again"" . and after clicking okey it`s installing bar doesnt go forward(Most comments which I found was about app strore but in this step I have no access to app store) . could you please help me what to do?

Problem installing 0SALES_UNIT from Business Content

Dear Friends,
I have tried to install 0SALES_UNIT from the business content but it does not appear under the InfoObjects tab.
What could be the problem?
When i try to install it, the system shows that an active version of the object already exists. I have tried to install it inspite of the existing active version and also get a green signal. Thanks for all the help in advance.
Raj

Raj,
Here is the solution to this problem.
You have successfully activated the infoObject but do not see it under the infoObject list. This happens due to inconsistencies in the RSDIOBCIOBJ table. To solve this error, go to SE37 and execute the RSDG_IOBC_REORG function module. Put in the following parameters.
I_IOBJVERS -
> A
I_PROGRESS -
>
I_IOBJTP -
> *
I_ALL_IOBJ -
> X
I_T_IOBJNM -
>
I_BYPASS_BUFFER-->
Press F8 to execute.
Then go to RSA1 and you should find your infoObject.
Don't forget to assign points!!!
Abdul

Problem installing ArchLinux from hdd partition

I have a SATA drive mounted on a VIA Epia motherboard, but no CD drive, which is why I install directly from hdd.
Currently I have Zenwalk running, which only has Lilo (no grub even in the repos!!!). I copied to contents of the install ISO to a new ext3 partition and used the following entry in lilo (taken from this guide):
image=/root/tmp/isolinux/vmlinuz
label=ArchInstall
initrd=/root/tmp/isolinux/initrd.img
append="root=/dev/sda4 BOOTMEDIA=cd"
But it doesn't boot properly. It says:
::Initramfs Completed - control passing to kinit
IP-config: no devices to configure
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
kinit: Mounted root (ext3 filesystem) readonly.
kinit: init not found!
Kernel panic - not syncing: Attempted to kill init
..and before all that it complains that it doesn't find anything new in /config and /packages, but these directories aren't suppose to exist, I guess, because they don't on the original iso?
Anyways, it looks like it's mounting /dev/sda4, but then dies because the init part isn't found. I had a problem with lilo warning me that the init ram image was too large, but then I added the "large-memory" option to lilo.conf and it stopped complaining.
Thanks for reading,
Benjamin

I found a solution!
Aparently syslinux is very good for booting anything made with isolinux. I think it's pretty universal. So what you do is simply to mount the iso, copy the contents to a fat 16 partition, rename the isolinux.cfg to syslinux.cfg and then run syslinux on the partition. It's described on this blog:
http://www.elfenbeinturm.cc/2007/08/09/ … kpad-x60s/
/ Benjamin

I had a problem installing Safari from my install disc

Hi,
A few days ago I posted a message that the Safari download would not recognize that I had 10.5.5 on my machine, and someone suggested that I re-install it from the discs that came with it. I did install something but apparently not Safari. I don't want to open up the Leopard re-install because I don't need Leopard, I just want the Safari, so now what do I do?
Thx

Welcome To  Discussions SHRiley!
Is this the Mac OS X 10.5.5 Combo Update. you are using?
If not, download that.
Run Repair Permissions.
Install that Combo Update.
Again run Repair Permissions.
ali b

Problem installing stuff from software pack N95, m...

Hi,
I bought a Nokia N95 few days ago.
I have success fully installed PC suite.
But,
when I try to install stuff from the "Software Pack CD" it gives me error about missing "MSVCR80.dll".
Can some one tell me how to fix.
I went back to the shop and got the CD changed, but it didn't help.
Also please tell me how can I use Navigation on N95. Do I have to buy the liscence from nokia or there is some other way.

Hi lafanter
Is your Windows NET 2.0 or 3.0 Framework OK?
Happy to have helped forum in a small way with a Support Ratio = 37.0

Having a problem installing hfm from yaourt

im trying to install hfm-net-sv a fah montioring program, and im having problems, i have tried downloading the pkg build manualy and running makepkg , but i still get the same error:
[mark@markspc hfm]$ yaourt hfm-net-svn
1 aur/hfm-net-svn 20-1 (1)
Folding@Home monitor written in .NET/mono
==> Enter n° (separated by blanks, or a range) of packages to be installed
==> ----------------------------------------------
==>1
==> Resuming previous build
==> Downloading hfm-net-svn PKGBUILD from AUR...
--2010-05-15 22:24:37-- http://aur.archlinux.org/packages/hfm-net-svn/hfm-net-svn.tar.gz
Resolving aur.archlinux.org... 208.92.232.29
Connecting to aur.archlinux.org|208.92.232.29|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 790 [application/x-tgz]
Saving to: `hfm-net-svn.tar.gz'
100%[============================================================================================================>] 790 --.-K/s in 0s
2010-05-15 22:24:37 (310 MB/s) - `hfm-net-svn.tar.gz' saved [790/790]
bsdtar: Removing leading '/' from member names
x PKGBUILD
First Submitted: Fri, 05 Jun 2009 02:19:03 +0000
hfm-net-svn 20-1 : Folding@Home monitor written in .NET/mono
( Unsupported package: Potentally dangerous ! )
==> Edit PKGBUILD = [Y/n] ("A" to abort)
==> ----------------------------------------------
n
==> hfm-net-svn dependencies:
- mono (already installed)
- subversion (already installed)
- monodevelop (already installed)
==> Continue the building of hfm-net-svn = [Y/n]
==> ----------------------------------------------
==>y
==> Install or build missing dependencies for hfm-net-svn:
==> Building and installing package
==> Yaourt has detected previous hfm-net-svn build. Do you want to use it (faster) = [Y/n]
==> ----------------------------------------------
==>n
==> hfm-net-svn dependencies:
- mono (already installed)
- subversion (already installed)
- monodevelop (already installed)
==> Determining latest svn revision...
-> Version found: 180
==> Making package: hfm-net-svn 180-1 x86_64 (Sat May 15 22:24:46 BST 2010)
==> Checking Runtime Dependencies...
==> Checking Buildtime Dependencies...
==> Retrieving Sources...
==> Extracting Sources...
==> Removing existing pkg/ directory...
==> Entering fakeroot environment...
==> Starting build()...
At revision 180.
==> SVN checkout done or server timeout
==> Starting make...
MonoDevelop Build Tool
Loading solution: ./HTMLparser2.sln
Loading solution: ./HTMLparser2.sln
Loading projects ..
Building: HTMLparser2 (Release)
Building Solution HTMLparser2
Building: HTMLparserLibDotNet11 (Release)
Performing main compilation...
/usr/bin/gmcs /noconfig
"/out:/tmp/yaourt-tmp-mark/aur-hfm-net-svn/hfm-net-svn/src/hfm-net-buil
d/HTMLparser2/bin/Release/HTMLparser.dll" "/r:System.dll"
"/r:System.Data.dll" "/r:System.Xml.dll" /nologo /warn:4 /optimize+
/codepage:utf8 "/define:TRACE" /t:library
"/tmp/yaourt-tmp-mark/aur-hfm-net-svn/hfm-net-svn/src/hfm-net-build/HTM
Lparser2/AssemblyInfo.cs"
"/tmp/yaourt-tmp-mark/aur-hfm-net-svn/hfm-net-svn/src/hfm-net-build/HTM
Lparser2/DynaString.cs"
"/tmp/yaourt-tmp-mark/aur-hfm-net-svn/hfm-net-svn/src/hfm-net-build/HTM
Lparser2/FastHash.cs"
"/tmp/yaourt-tmp-mark/aur-hfm-net-svn/hfm-net-svn/src/hfm-net-build/HTM
Lparser2/HTMLchunk.cs"
"/tmp/yaourt-tmp-mark/aur-hfm-net-svn/hfm-net-svn/src/hfm-net-build/HTM
Lparser2/HTMLentities.cs"
"/tmp/yaourt-tmp-mark/aur-hfm-net-svn/hfm-net-svn/src/hfm-net-build/HTM
Lparser2/HTMLheuristics.cs"
"/tmp/yaourt-tmp-mark/aur-hfm-net-svn/hfm-net-svn/src/hfm-net-build/HTM
Lparser2/HTMLparser.cs"
"/tmp/yaourt-tmp-mark/aur-hfm-net-svn/hfm-net-svn/src/hfm-net-build/HTM
Lparser2/TagParser.cs"
Compilation succeeded - 4 warning(s)
/tmp/yaourt-tmp-mark/aur-hfm-net-svn/hfm-net-svn/src/hfm-net-build/HTML
parser2/HTMLparser.cs(948,53): warning CS0219: The variable
`iLastCurPos' is assigned but its value is never used
/tmp/yaourt-tmp-mark/aur-hfm-net-svn/hfm-net-svn/src/hfm-net-build/HTML
parser2/HTMLparser.cs(902,37): warning CS0219: The variable
`iQuadBytes' is assigned but its value is never used
/tmp/yaourt-tmp-mark/aur-hfm-net-svn/hfm-net-svn/src/hfm-net-build/HTML
parser2/HTMLparser.cs(166,22): warning CS0414: The private field
`Majestic12.HTMLparser._bDecodeEntities' is assigned but its value is
never used
/tmp/yaourt-tmp-mark/aur-hfm-net-svn/hfm-net-svn/src/hfm-net-build/HTML
parser2/HTMLparser.cs(183,22): warning CS0414: The private field
`Majestic12.HTMLparser._bDecodeMiniEntities' is assigned but its value
is never used
Build complete -- 0 errors, 4 warnings
MonoDevelop Build Tool
Loading solution: ./HFM.Setup.sln
Loading solution: ./HFM.Setup.sln
Loading projects ..
WARNING: ./HFM.Setup.sln(4): Unsupported or unrecognized project :
'/tmp/yaourt-tmp-mark/aur-hfm-net-svn/hfm-net-svn/src/hfm-net-build/HFM
.Setup/HFM.Setup.wixproj'.
install: cannot stat `/tmp/yaourt-tmp-mark/aur-hfm-net-svn/hfm-net-svn/src/hfm-net-build/HFM/bin/Release/HFM.exe': No such file or directory
install: cannot stat `/tmp/yaourt-tmp-mark/aur-hfm-net-svn/hfm-net-svn/src/hfm-net-build/HFM/bin/Release/*.dll': No such file or directory
install: cannot stat `/tmp/yaourt-tmp-mark/aur-hfm-net-svn/hfm-net-svn/src/hfm-net-build/HFM/bin/Release/CSS/*': No such file or directory
install: cannot stat `/tmp/yaourt-tmp-mark/aur-hfm-net-svn/hfm-net-svn/src/hfm-net-build/HFM/bin/Release/XML/*': No such file or directory
install: cannot stat `/tmp/yaourt-tmp-mark/aur-hfm-net-svn/hfm-net-svn/src/hfm-net-build/HFM/bin/Release/XSL/*': No such file or directory
==> ERROR: Build Failed.
Aborting...
Error: Makepkg was unable to build hfm-net-svn package.
[mark@markspc hfm]$
any help will be appricated, thanks, mark

I think this should be posted in the aur section...
Have you tried asking the maintainer?

Multiple problems installing upgrade from CS5 Design Prem. to CS6 Design Prem.

I had started a thread a few days ago regarding problems that I was having while installing my upgrade from CS5 Design Premium to CS6 Design Premium. Everything seemed to install fine with the exception of Acrobat X Pro. http://forums.adobe.com/message/4716847#4716847
I thought that I had resolved the issue through tech support, but apparently not. First of all, they had me install the trial version of Acrobat X which actually let me install with no errors. A couple of days passed and Acrobat asked if I would like to continue my trial or enter a serial number. I tried to use my serial that came with my upgrade but it rejected it, so I opted to continue the trial. Then earlier today as I was working in InDesign, upon launching I got a script error message.
Error in C:\Program Files (x86)\Common Files\Adobe\Startup Scripts CS6\Flash\Flash-12.0.jsx
Line 153: if( app.name = = flashAppname && (module.name = = 'DefaultScript' II module.name = = 'Flash'))
Cannot open resource file.
After clicking OK it seemed to open InDesign fine and I was able to open files and go about working. While working I noticed that I had no effects in the dropdown menu under 'Object'. Tried the shortcut for them and nothing happened. I have yet to try to open any files containing effects (drop shadow or something) but am guessing that they will not work. My next course of action was to try to Uninstall and Re-Install. I removed CS6 and Acrobat X Pro from my computer and ran the Creative Suite Cleaner program. Then instead of installing the upgrade from the DVD, I decided to download the program from the Adobe LWS and give that a go thinking that maybe the download files are more up-to-date than the DVD that I recieved. Now it seems I am back to square one with the same problems (InDesign missing 'Effects' and who knows what else, and Acrobat X Pro failed to install), but this time I have diffent errors on the "error summary file" that shows up as a link in the "Installation Complete" dialog box. Sorry for being windy, but I really need to get this resolved. Thanks for any and all input. PC is Dell Precision T3500 running Windows 7 and is current on it's updates.
Here is a copy of the errors from that page:
Exit Code: 6
Please see specific errors and warnings below for troubleshooting. For example, ERROR: DW050 ... WARNING: DF012, DS013 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 3 error(s), 5 warning(s)
WARNING: DS013: Payload {3BF96AC2-0CA1-11DF-B07B-459956D89593} AdobeHelp 1.0.0.0 is already installed and the session payload {D38116C8-C472-4BB0-AD6F-0C1DD1320D1D} AdobeHelp 4.0.0.0 has no upgrade/conflict relationship with it.
WARNING: DS013: Payload {A8798E04-96FF-4564-9157-0D4C89CB794C} DynamiclinkSupport 5.0.0.0 is already installed and the session payload {DE88AA40-6766-43D3-A755-8FC374B3D2C3} DynamiclinkSupport 6.0.0.0 has no upgrade/conflict relationship with it.
WARNING: DS013: Checking payloads upgrade/conflict relationships : Failed with code 1
----------- Payload: {AC76BA86-1033-F400-7760-000000000005} Acrobat Professional 10.0.0.0 -----------
ERROR: Error 1310.Error writing to file: C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\Locale\fr_FR\AcroIEFavClient.FRA. Verify that you have access to that directory.
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 1310.Error writing to file: C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\Locale\fr_FR\AcroIEFavClient.FRA. Verify that you have access to that directory.
----------- Payload: {CA7C485C-7A89-11E1-B2C8-CD54B377BC52} Adobe Fireworks CS6 12.0.0.0 -----------
WARNING: DF012: File/Folder does not exist at C:\Users\Jon\Desktop\Adobe CS6 Design and Web Premium\Adobe CS6\payloads\AdobeFireworks12-mul\OEM(Seq 2141)
----------- Payload: {05E1E278-7A8D-11E1-A0B9-FC0245DB7244} Adobe Fireworks CS6_AdobeFireworks12en_USLanguagePack 12.0.0.0 -----------
WARNING: DF012: File/Folder does not exist at C:\Users\Jon\Desktop\Adobe CS6 Design and Web Premium\Adobe CS6\payloads\AdobeFireworks12en_USLanguagePack\OEM(Seq 76)
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Acrobat Professional: Install failed

Errors "Exit Code: 6," "Exit Code: 7"
Acrobat Cleaner Tool
Sign in or activation errors
CS6 applications in Creative Cloud unexpectedly revert to trial mode
Flash Player Help | Installation problems | Flash Player | Windows
Mylenium

[RESOLVED] Wireless_tools - Unable to install it from source

Hello everybody,
I just moved from ubuntu to archlinux few days ago.
So I did use the net install from isolinux because the core install was dropping me to the grub menu.
So I configured the network during the install process with dhcpcd and iwconfig wlan0 essid xxx key xxx and it did work like a charm. I noticed something btw, my desktop (where I am performing the install) haven't got the access to internet till I reboot it and put my laptop offline (to help me with archlinux wiki while installing). Weird. Like if the laptop was getting the address in place of the desktop.. .
The install completed perfectly and I rebooted.
Here are the troubles...
I started my fresh install and tried to install couple of things but I was offline. I thought I got to do the same: precising to the system my essid and the corresponding key with iwconfig.
Iwconfig: command not found.
Ok, why is that I dunno but I downloaded the wireless_tools.29 on my laptop, put it on my WD Passport USB HDD, mount it in Arch, was able to copy the directory and unpack it in my root directory. Then I run a make && make install, everything seemed ok. I still hadn't found iwconfig at this point so I followed up the instructions here: http://julp.developpez.com/linux/wg511T/
Still doesn't work.
I tried to pacman -U but it said the package is corrupted, I downloaded it again but same error...
So if someone would just give me the instructions to perform the install from those sources or from the tar.gz file properly, I'll appreciate it.
Thank you,
David
PS: I have searched the whole forum but didn't find an explanation with the source file, maybe I am wrong to go that way...
Last edited by davasse (2009-08-23 01:09:08)

ftp://ftp.archlinux.org/core/os/i686/wi … pkg.tar.gz
Why not try downloading the above- just run a pacman -U (it's 32 bit, for the record).

Problems Installing Updates from WSUS - Error Code 0x800f0826

Hi Everyone,
I have a WSUS server that I am using to dish out updates to the rest of my network. I am using PC's with Windows Vista SP1. Most of my PC's are installing updates fine with no problems - but there are a certain few that will not install any updates and return the error 0x800f0826.
All of the PC's are from the same image - so there is nothing different in the software setup that I am aware of.
I have been browing the net for ages, and have tried a few fixes - for example:
Starting Various Services and Setting to Automatic - No Luck
Renaming the SoftwareDistribution Folder - No Luck
Checked update history for failed updates and unassigned potential problem update - No Luck.
I am running out of ideas now - can anyone help?
Thanks
Matt

Install System Update Readiness Tool
Once you installed SUR Tool, run below commands
DISM.exe /Online /Cleanup-image /Scanhealth
DISM.exe /Online /Cleanup-image /Restorehealth
Downlod System Update Readiness Tool from below link
http://windows.microsoft.com/en-GB/windows7/What-is-the-System-Update-Readiness-Tool
Refer : http://www.thewindowsclub.com/checksur-system-update-readiness-tool
Refer below link for analyzing log and further troubleshoot :
http://www.sevenforums.com/tutorials/108805-system-update-readiness-tool-checksur-log-file-analyzis.html
Regards,
Manjunath Sullad

Corrupt file problems installing latest Flash on Windows Vista - help please?!

When trying to install the latest Flash on my Windows Vista (I'm not great with computers so more than the internet system I use I'm not sure what other details are necessary), I keep getting the message "install_flashplayer11x32_mssd_aih.exe - Corrupt File. File or directory C:\$Secure is corrupt and unreadable. Please run the Chkdsk utility." As I have no idea what the Chkdsk utility is, or how to run it, can someone please tell me how to fix this problem? Apparently I have Flash Player installed on my computer, but not the plug-in necessary to play media files on the internet. What do I need to do to fix this?

This Microsoft help document should walk you through the steps of using Chkdsk to scan (and repair) your hard drive.
Check your hard disk for errors

Multiplex files won't drag from source to edit window

I have .mov files from the SLR, the audio can been seen and played from the Source window. However, and this has occured withing past couple of days, I can not grap the file from the window and move it down to editing. The video will drag, but I can not get the audio to come down even as a seperate file. There must be something I did unknowingly a couple of days ago. I have been all over the menus and can't find a solution.
chuck

Mark said
I'm seeing exactly what you show, Steven. ....
However, if source patching is enabled for only a video track, then on dragging from the Source Monitor only the video gets added to the sequence. And, naturally, vice versa if source patching is enabled for only an audio track.
Thats what I am talking about too. ..and it suits me perfectly.
The anomally is that with neither A1 V1 selected ...audio and Video is styill both dropable.
I am fine with that too even though its a little illogical. (Dont fix it on my account)
Thanx for doing the great Vid Steven... you just missed out the important extra option but that was a good way to point out the difference in the discussion... before Jim and I came to blows!.
BTW - nice voice you have.
FWIW: Expanding on why it suits me to only drag one , the other or both by using the Source Selector.
In the case of a shoot (edit) where I have Synch scenes as well as MOS.. that selector is the fastest workflow for me because I can choose quickly on the fly what I want in the Timeline. (audio, video, both)
On a shoot (edit) with all MOS...I map all the clips to No Audio Channnels at the out set and never have to make the decison again.

File problems installing FLAC from source

Similar Messages

Maybe you are looking for