File to database error

Hi Experts,
While executing the scenario,I got the following error.
Attempt to establish database connection failed with SQL error com.sap.aii.adapter.jdbc.sql.DriverManagerException: Cannot establish connection to URL 'jdbc:oracle://aljs047:1521/EMPTABLE': SAPClassNotFoundException: com.oracle.jdbc.Driver
Error Exception caught by adapter framework: Database connection could not be established
Please guide me to correct it.
Points will be rewarded.
thanks in advance.
Kind Regards,
Naresh

HI,
U have not installed the drivers on the XI. Check whether the drivers are installed or not?
If not then please go through the below weblog for information:
deploy drivers for JMS-JDBC scenarios - https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3867a582-0401-0010-6cbf-9644e49f1a10
Thnx
Chirag

Similar Messages

System Failure:-Error while retreiving xml file from database

I install Planning 9.3.1 at Windows2003 server SP1 and MS SQL 2000 SP3A. In Hyperion Planning Instance Registration I take "System Failure:-Error while retreiving xml file from database" error in Configuration .
Please help
Thanks

I also have the same error. Win2000 Server and MS SQL 2005.
Maybe someone made request for official information from Oracle about this issue?
I'd like to change MS SQL to Oracle 10g, I hope this can helps (if reason in RDBMS). But if reason in logic of scripts... I dont't know...

Getting `No such file or directory` error while trying to open bdb database

I have four multi-threaded processes (2 writer and 2 reader processes), which make use of Berkeley DB transactional data store. I have multiple environments and the associated database files and log files are located in separate directories (please refer to the DB_CONFIG below). When all these four processes start to perform open and close of databases in the environments very quickly, one of the reader process is throwing a No such file or directory error even though the file actually exists.
I am making use of Berkeley DB 4.7.25 for testing out these applications.
The four application names are as follows:
Writer 1
Writer 2
Reader 1
Reader 2
The application description is as follows:
‘*Writer 1*’ owns 8 environments and each environment having 123 Berkeley databases created using HASH access method. At any point of time, ‘*Writer 1*’ will be acting on 24 database files across 8 environments (3 database files per environment) for carrying out write operation. Where as reader process will be accessing all 123 database files / per environment (Total = 123 * 8 environments = 984 database files) for read activities. Similar configuration for Writer 2 as well – 8 separate environments and so on.
Writer 1, Reader 1 and Reader 2 processes share the environments created by Writer 1
Writer 2 and Reader 2 processes share the environments created by Writer 2
My DB_CONFIG file is configured as follows
set_cachesize 0 104857600 1   # 100 MB
set_lg_bsize 2097152                # 2 MB
set_data_dir ../../vol1/data/
set_lg_dir ../../vol31/logs/SUBID/
set_lk_max_locks 1500
set_lk_max_lockers 1500
set_lk_max_objects 1500
set_flags db_auto_commit
set_tx_max 200
mutex_set_increment 7500
Has anyone come across this problem before or is it something to do with the configuration?

Hi Michael,
I should have included about how we are making use of DB_TRUNCATE flag in my previous reply itself. Sorry for that.
From writers, DB truncation happens periodically. During truncate (DB handle is not associated with any environment handle i.e. stand-alone DB
) following parameters are passed to db->open function call:
DB->open(DB *db,
DB_TXN *txnid,          => NULL
const char *file,          => file name (absolute DB file path)
const char *database, => NULL
DBTYPE type, => DB_HASH
u_int32_t flags, => DB_READ_UNCOMMITTED | DB_TRUNCATE | DB_CREATE | DB_THREAD
int mode); => 0
Also, DB_DUP flag is set.
As you have rightly pointed out, `No such file or directory` is occuring during truncation.
While a database is being truncated it will not be found by others trying to open it. We simulated this by stopping the writer process (responsible for truncation) and by opening & closing the databases repeatedly via readers. The reader process did not crash. When readers and writers were run simultaneously, we got `No such file or directory` error.Is there any solution to tackle this problem (because in our case writers and readers are run independently. So readers won't come to know about truncation from writers)?
Also, we are facing one more issue related to DB_TRUNCATE. Consider the following scenario:
<ul><li>Reader process holds reference of database (X) handle in environment 'Y' at time t1
</li>
<li>Writer process opens the database (X) in DB_TRUNCATE mode at time t2 (where t2 > t1)</li>
<li>After truncation, writer process closes the database and joins the environment 'Y'</li>
<li>After this any writes to database X is not visible to the reader process</li>
<li>Once reader process closes the database X and re-joins the environment, all the records inserted from writer process are visible</li>
</ul>
Is it the right behavior? If yes, how to make any writes visible to a reader process without closing and re-opening the database in the above-mentioned scenario?
Also, when [db_set_errfile|http://www.oracle.com/technology/documentation/berkeley-db/db/api_c/db_set_errfile.html] was set, we did not get any additional information in the error file.
Thanks,
Magesh

File not found error after database migration

Hi experts
I recently decided to create a test environment for SharePoint 2010 production server but after
attach the content database using power shell successfully I get “ file not found “ error when I try to login the top site collection
I think it’s because of customized master page in production site which I don’t know how to apply them to my new environment.I even tried to copy the master pages from cataloge throught SPD but it didnt work.
Any assistance would be greatly appreciated

HI Shahin,please try to access the site by below and let me know the result.please check the below link that gives more idea on the issue
_/_layouts/settings.aspx
/_layouts/viewlsts.aspx
/default.aspx
http://expertsharepoint.blogspot.de/2014/01/sharepoint-default-page-not-loading-by.html
Anil Avula[MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/

Error while retreiving xml file from database

Hi-
I am trying to configure Planning and getting the following error message at instance configuration step:
"Error while retreiving xml file from database"
We looked at PlanningSystemDB.properties, changes server name to its ip, reinstalled planning, made sure both auth methods are selected (sql server and windows), created new relational repository.. still the same error.
Here is the contents of the configtool error file:
(Dec 11, 2008, 04:36:44 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
(Dec 11, 2008, 04:37:09 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
(Dec 11, 2008, 04:38:41 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
(Dec 11, 2008, 04:39:07 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
(Dec 11, 2008, 04:39:12 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
(Dec 11, 2008, 04:39:22 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
(Dec 11, 2008, 04:40:46 PM), com.hyperion.cis.config.CmsRegistrationUtil, ERROR, Failed to authenticate user = admin
(Dec 11, 2008, 04:41:05 PM), com.hyperion.cis.config.CmsRegistrationUtil, ERROR, Failed to authenticate user = admin
(Dec 11, 2008, 04:48:28 PM), com.hyperion.cis.DBConfigurator, ERROR, Invalid SQL statement: begin transaction IF EXISTS (select * from sysobjects where id = object_id(N'[HSPSYS_PROPERTIES]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSPSYS_PROPERTIES IF EXISTS (select * from sysobjects where id = object_id(N'[HSPSYS_APP_CLUSTER_DTL]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSPSYS_APP_CLUSTER_DTL IF EXISTS (select * from sysobjects where id = object_id(N'[HSPSYS_APPLICATION]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSPSYS_APPLICATION IF EXISTS (select * from sysobjects where id = object_id(N'[HSPSYS_DATASOURCE]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSPSYS_DATASOURCE IF EXISTS (select * from sysobjects where id = object_id(N'[HSPSYS_CLUSTER]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSPSYS_CLUSTER IF EXISTS (select * from sysobjects where id = object_id(N'[HSP_ACTION]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSP_ACTION IF EXISTS (select * from sysobjects where id = object_id(N'[HSPSYS_PI_INFO]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSPSYS_PI_INFO commit begin transaction CREATE TABLE HSP_ACTION ( ID INTEGER NOT NULL IDENTITY, CONSTRAINT PK_HSP_ACTION PRIMARY KEY(ID) , FROM_ID INTEGER, TO_ID INTEGER, ACTION_ID INTEGER, OBJECT_TYPE INTEGER, PRIMARY_KEY VARCHAR(255), ACTION_TIME DATETIME ); CREATE TABLE HSPSYS_CLUSTER ( CLUSTER_ID INTEGER NOT NULL, NAME VARCHAR(255) NOT NULL, DESCRIPTION VARCHAR(255), CONSTRAINT PK_HSPCLUSTER PRIMARY KEY(CLUSTER_ID) ); CREATE TABLE HSPSYS_DATASOURCE ( DATASOURCE_ID INTEGER NOT NULL, NAME VARCHAR(255) NOT NULL, DESCRIPTION VARCHAR(255), APP_ID INTEGER, RDB_SERVER_URL VARCHAR(255), RDB_TYPE VARCHAR(255) NOT NULL, RDB_CATALOG_NAME VARCHAR(255) NOT NULL, RDB_USER VARCHAR(255) NOT NULL, RDB_PASSWORD VARCHAR(255), RDB_DRIVER VARCHAR(255) NOT NULL, ESS_SERVER VARCHAR(255) NOT NULL, ESS_USER VARCHAR(255) NOT NULL, ESS_PASSWORD VARCHAR(255), CONSTRAINT PK_HSPDTASRC PRIMARY KEY(DATASOURCE_ID) ); CREATE TABLE HSPSYS_APPLICATION ( APP_ID INTEGER NOT NULL, NAME VARCHAR(255) NOT NULL, DESCRIPTION VARCHAR(255), DATASOURCE_ID INTEGER NOT NULL, CONSTRAINT FK_HSPAPP_DSID FOREIGN KEY(DATASOURCE_ID) REFERENCES HSPSYS_DATASOURCE, VERSION VARCHAR(255) NOT NULL, CONSTRAINT PK_HSPAPP PRIMARY KEY(APP_ID) ); CREATE TABLE HSPSYS_APP_CLUSTER_DTL ( APP_ID INTEGER NOT NULL , CONSTRAINT FK_HSP_APP_ID FOREIGN KEY (APP_ID) REFERENCES HSPSYS_APPLICATION , CLUSTER_ID INTEGER NOT NULL, CONSTRAINT FK_HSPCS_CLID FOREIGN KEY(CLUSTER_ID) REFERENCES HSPSYS_CLUSTER, CONSTRAINT PK_APP_CLSTR_DTL PRIMARY KEY(CLUSTER_ID, APP_ID) ); CREATE TABLE HSPSYS_PROPERTIES ( PROPERTY_ID INTEGER NOT NULL, OBJECT_ID INTEGER NOT NULL, PROPERTY_NAME VARCHAR(255) NOT NULL, PROPERTY_VALUE VARCHAR(255), CONSTRAINT PK_HSPPROP PRIMARY KEY(PROPERTY_ID, OBJECT_ID, PROPERTY_NAME) ); CREATE TABLE HSPSYS_PI_INFO ( XML_FILE NTEXT NOT NULL ); commit
(Dec 11, 2008, 04:50:32 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
Thanks for any help.

After spending 2+ hrs with Hyperion Support nothing got resolved.. Just to give more background on this problem, we originally reconfigured all Hyperion components to use different SQL server, that is when the problem started happening as soon as we got to Planning Instance Configuration. Could this be the situations when old server name is still somewhere in the system?.. Could this be Shared Services problem.
Here is another quote from SharedServices_Security.log
2008-12-12 15:08:48,249 [http-58080-Processor1] WARN com.hyperion.css.spi.impl.nv.NativeProvider.getHierarchicalRoleTree(Unknown Source) - Exception getting Child Roles in hierarchy due to Illegal or invalid id.dflt passed in. Please check the argument.
2008-12-12 15:31:18,121 [main] WARN com.hyperion.css.common.configuration.CSSConfigurationImplXML.<init>(Unknown Source) - Skipping the validation of the configuration because the required validating parser library not found or errors in validation. This does not guarantee the proper initialization of the component.
2008-12-12 15:31:29,808 [Thread-8] WARN com.hyperion.css.spi.impl.msad.MSADCacheUpdater.resolveCircularDependency(Unknown Source) - INFO: Time to resolve circular dependency on the Cache for provider: DIPORTAL is : 0
2008-12-12 15:31:29,808 [Thread-8] WARN com.hyperion.css.spi.impl.msad.MSADCacheUpdater.refreshProviderCache(Unknown Source) - INFO: Time to build Cache for provider: DIPORTAL in millis is : 1016
2008-12-12 15:31:30,823 [main] WARN com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - The system has already been configured; skipping attempt to configure the system again with the new config file /F:/Hyperion/deployments/Tomcat5/SharedServices9/config/CSS.xml.
2008-12-12 15:31:41,229 [http-58080-Processor4] ERROR com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - Unable to get CSS.xml file or the file may be read only
2008-12-12 15:31:41,229 [http-58080-Processor4] WARN com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - The system has already been configured; skipping attempt to configure the system again with the new config file /null.
2008-12-12 15:38:01,938 [main] WARN com.hyperion.css.common.configuration.CSSConfigurationImplXML.<init>(Unknown Source) - Skipping the validation of the configuration because the required validating parser library not found or errors in validation. This does not guarantee the proper initialization of the component.
2008-12-12 15:38:13,454 [Thread-8] WARN com.hyperion.css.spi.impl.msad.MSADCacheUpdater.resolveCircularDependency(Unknown Source) - INFO: Time to resolve circular dependency on the Cache for provider: DIPORTAL is : 0
2008-12-12 15:38:13,454 [Thread-8] WARN com.hyperion.css.spi.impl.msad.MSADCacheUpdater.refreshProviderCache(Unknown Source) - INFO: Time to build Cache for provider: DIPORTAL in millis is : 813
2008-12-12 15:38:35,453 [main] WARN com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - The system has already been configured; skipping attempt to configure the system again with the new config file /F:/Hyperion/deployments/Tomcat5/SharedServices9/config/CSS.xml.
2008-12-12 15:42:09,776 [http-58080-Processor3] ERROR com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - Unable to get CSS.xml file or the file may be read only
2008-12-12 15:42:09,776 [http-58080-Processor3] WARN com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - The system has already been configured; skipping attempt to configure the system again with the new config file /null.
2008-12-12 15:42:09,776 [http-58080-Processor2] ERROR com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - Unable to get CSS.xml file or the file may be read only
2008-12-12 15:42:09,776 [http-58080-Processor2] WARN com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - The system has already been configured; skipping attempt to configure the system again with the new config file /null.

"Error retrieving xml file from database"

Hello All,
I have installed and configured planning with Shared services. While I try to create an instance in Configuration Utility by entering the Instance Name, Host Name, Port (8300) and Click "Next", I get this error -
*"System failure:Error retrieving xml file from database".*
My RDBMS is - SQL Server 2005
OS - Windows 2003 Server
I am unable to work on planning for few months due to this error.. I would sincerely appreciate if someone can provide me a solution for this..
Thanks much,
Varma.

Hi,
Ive seen this before.
If this is a new environment could you create a blank database and configure it as your System database? Then try again and you should be fine.
I think you may have some invalid entries in your sys database.
Seb
www.taysols.com.au

Product Instance Registration Error Message: "System Failure: Error while retrieving xml file from database"

Hi Planning installation Gurus,
Did u get any luck to resolve this problem as i am also facing same problem "Error creating instance" during install of Planning 9.3.1. i tried 30-50 times reconfiguration every time same problem..
OS: Vista Premium
SQL Server 2005
Essbase:9.3.1
Error Message: "System Failure: Error while retrieving xml file from database"
Details of error:::::::::::::::::::::::::
at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
Can not get JDBC connection for SYS external changed actions.
Can not get JDBC connection.
java.lang.NullPointerException
at com.hyperion.planning.sql.HspSQLImpl.getConnection(Unknown Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller(Unkno
wn Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
Can not get JDBC connection for SYS external changed actions.
Can not get JDBC connection.
java.lang.NullPointerException
at com.hyperion.planning.sql.HspSQLImpl.getConnection(Unknown Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller(Unkno
wn Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
Can not get JDBC connection for SYS external changed actions.
Can not get JDBC connection.
Pls provide Solution

Hi John,
though i am trying with SQl server authentication with different user but still status is same of planningSystemDB.properties
SYSTEM_DB_DRIVER=hyperion.jdbc.sqlserver.SQLServerDriver
SYSTEM_DB_URL=jdbc:hyperion:sqlserver://neeraj-PC:1433
SYSTEM_DB_USER=windowsAuthentication
SYSTEM_DB_PASSWORD=CAFBAEFNBGEAABHEDOADFKADACBGBIFHBLCDFBAFFH
SYSTEM_DB_CATALOG=plandb
SYSTEM_DB_TYPE=SQL
INSTANCE=
my steps:
Using SQL Server Management Studio
Changed Widows authentication to SQL server authentication mode
In SQL Server Management Studio Object Explorer, right-click the server, and then click Properties.
On the Security page, under Server authentication, select the new server authentication mode, and then click OK.
In the SQL Server Management Studio dialog box, click OK to acknowledge the requirement to restart SQL Server.
In SQL Server Management Studio Object Explorer, right-click the server, and then click Properties.
On the Security page, under Server authentication, select the new server authentication mode, and then click OK.
In the SQL Server Management Studio dialog box, click OK to acknowledge the requirement to restart SQL Server.
To restart SQL Server from SQL Server Management Studio
To enable the sa login by using Management Studio
In Object Explorer, expand Security, expand Logins, right-click sa, and then click Properties.
On the General page, you might have to create and confirm a password for the sa login.
On the Status page, in the Login section, click Enabled, and then click OK.
In Object Explorer, expand Security, expand Logins, right-click sa, and then click Properties.
On the General page, you might have to create and confirm a password for the sa login.
On the Status page, in the Login section, click Enabled, and then click OK.}}}
anything else should i change.................

Product Instance Registration Error: "System Failure: Error while retrieving xml file from database"

Hi S9 installation Gurus,
Please try to resolve this long awaited issue with Planning installation as this is purely configuration related issue.
Detail of Problem:-
After Susessful configuration of
1) Foundation Services (Hyperion Shared Services)
2) Essbase administration services
3) Essbase Server
4) Hyperion reporting and analysis
5) Planning -----> Product options, Register with shared services, configure database, deploy to application server (Appache)
Error Point: when i tick ckeck box in front of Product instance registration
click next
create instance
click next
instance name-Plan1
Web tier host name: my machine name (neeraj-pc, as i installed locally all component of hyperion)
server port: 8300 (system suggesting)
tick on active instance
click next
Error Pop Up "System Failure: Error while retrieving xml file from database"
Details of PlanningSystemDB (file :- \Hyperion\common\config\PlanningSystemDB.properties)
SYSTEM_DB_DRIVER=hyperion.jdbc.sqlserver.SQLServerDriver
SYSTEM_DB_URL=jdbc:hyperion:sqlserver://neeraj-PC:1433
SYSTEM_DB_USER=puser
SYSTEM_DB_PASSWORD=GGAKFJ
SYSTEM_DB_CATALOG=p1db
SYSTEM_DB_TYPE=SQL
INSTANCE=
Note: puser (SQL Authenticated user)
Thanks
Kumar
Edited by: user10385300 on Dec 4, 2008 5:44 AM

This has been resolved at :- Product Instance Registration Error Message: "System Failure: Error while retrieving xml file from database"
Cheers
John
http://john-goodwin.blogspot.com/

CR 2008 on SAP BW : Error on file filename : Database Connector Error

Hi,
We are facing a rather strange problem in our Prod box.
When we run a CR with a mandatory parameter from EP or Infoview,
For the first available LOV on Plant, (Plant is the Mandatory Parameter entry for the report)
For the first execution,
the Crystal report fails to execute and throws the following error.
Error on file <filename>: Database Connector Error
When we re-run the report with the same parameters, it executes and displays the result.
We are using Crystal Reports 2008 on SAP BW Query with SAP BW MDX Driver
Since the users currently access this report, we need this get resolved asap.
Any help is greatly appreciated.

Hi,
this is a forum so people will answer questions when they get to it.
if you need help "asap" then I would suggest you open a case with SAP Support
Ingo

Error for the uploading csv file to database

Hi i tried to upload the csv file to database and i am getting error as
<cffile action="read" file="#data_dir_upload#/di_audit_corp_upc_ldr_tbl.csv" variable="di_audit_corp_upc_ldr_tbl">

<cfloop index="index" list="#di_audit_corp_upc_ldr_tbl#" delimiters="#chr(10)##chr(13)#">
    <cfquery datasource="#request.dsnCAO#">
            
         INSERT INTO [dbo].[di_audit_corp_upc_ldr_tbl]
                            ( cpt_dpt_cd,cpt_com_cd,sub_com_cd,con_upc_no,pid_lng_dsc_tx,pid_sht_dsc_tx)
         VALUES
                  (<cfqueryparam value='#left(trim(listgetAt('#index#',2,',')),2)#' cfsqltype="cf_sql_char">,
                   <cfqueryparam value='#left(trim(listgetAt('#index#',3,',')),3)#' cfsqltype="cf_sql_char">,
                   <cfqueryparam value='#left(trim(listgetAt('#index#',4,',')),5)#' cfsqltype="cf_sql_char">,
                   <cfqueryparam value='#left(trim(listgetAt('#index#',1,',')),13)#' cfsqltype="cf_sql_varchar">,
                   <cfqueryparam value='#left(trim(listgetAt('#index#',5,',')),25)#' cfsqltype="cf_sql_varchar">,
                   <cfqueryparam value='#left(trim(listgetAt('#index#',6,',')),12)#' cfsqltype="cf_sql_varchar">)
   </cfquery>
</cfloop>
Error:
An error occurred while executing DTS package to import data.
Invalid list index 6.
In function ListGetAt(list, index [, delimiters]), the value of index, 6, is not a valid as the first argument (this list has 5 elements). Valid indexes are in the range 1 through the number of elements in the list.
i am unable to solve this issue can any one will help me to solve this issue
Thanks,
Kiran

I take it your are trying to use a csv file to insert new data into a database, using flex and coldfusion?
if so, then I would load the file in flex using cffile in ColdFusion and then use Load Data if you are using MySQL
This can show you more about it.
http://blog.tygate.com/?p=75
We get very large csv files ftp'd to us every week, and we have to load them in to the db. this works for us.

Error in file filename : Database Connector Error

Dears,
I face a problem from several days with one of my deployed reports to CMS.
The problem is the same reports run for some users and other users keeps to give them this error:
Error in file <filename>: Database Connector Error
Note: there is no filteration or any condition on users name and data resulted from this report is one for all users.
I tried everything, even i remove all objects from the report and keep only page headers it works.
But, if i readded any field from my DB object in crystal report the error appears again.
Please help, Thanks in advance.

Hello,
You are using the original release of Cr XI R2. This has likely been fixed after applying all Service Packs and Fix Packs.
You should update the BOE Servers also so before doing so please check with the BOE Administrator.
To get the BOE patches you have to log into Service Market Place. To get CR patches make sure you have your keycode saved and available.
Uninstall CR using the Add/Remove Programs in Control Panel and then use the Full version of CR XI R2 Service Pack 4 and you can then apply SP 6, if it requires SP 5 first please do so:
https://smpdl.sap-ag.de/~sapidp/012002523100011802732008E/crxir2_sp4_full_build.exe
https://smpdl.sap-ag.de/~sapidp/012002523100013876392008E/crxir2win_sp5.exe
https://smpdl.sap-ag.de/~sapidp/012002523100015859952009E/crxir2win_sp6.exe
We do recommend that BOE and CR be on the same patch level.
Thank you
Don

File crashes on opening, database error code 2, how to fix?

My InDesign CS6 file does not open due to a database error that occurs when I open it, showing as "error code 2". I urgently need this file due to graduate school applications and I am desperate for help. Any insight would be much appreciated!

If that doesn't work, see INDDRecovery — a program for restoring corrupted InDesign documents for Windows, or Repair corrupt InDesign Adobe files on Mac OS X and see that works.

Database error, file damaged, error code: 3

Hi,
I have what I believe is an InDesign CS3 file. InDesign CS4, 5, and 5.5 refuse to open it. When I try to open it in CS3, I get a database error, saying the file is damaged, error code: 3.
I'm sure the problem is with the file, not InDesign, since I've tried this on 2 Macs. CS3 quits before I can export to .idml.
I read some earlier threads concerning this error and I tried removing the Links, but that didn't help. I also read something about editing across a network but since this is not my file I don't know how it was created and edited in the past. I'm just looking for a solution.
Anyone?
Thanks,
Tina

Best bet is probably Markzware's recovery service, if the file is critical and would cost more than $200 to rebuild. Bad InDesign or Quark File Recovery Submission Form

Same message 2 dnld Plugin, (Java), and Adobe Reader: Error 2203.Database: C:\Windows\Installer\ced2e.ipi. Cannot open database file. System error -2147287035.E

Spent all afternoon downloading Java plugiins and Adobe reader; each with the following "failure message."
Error 2203.Database: C:\Windows\Installer\ced2e.ipi. Cannot open database file. System error -2147287035.Error 2203.Database: C:\Windows\Installer\ced2e.ipi. Cannot open database file. System error -2147287035.

This is going to sound lame, but... have you shut down and restarted Windows since this problem began? Sometimes the Windows Installer starts behaving erratically, perhaps due to a backlog of deferred updates, and the only way to get around it is to reboot.

In SM21 - Database error 235 at EXE

Hello Gurus,
In sm21 - Database error 235 at EXE this error shown in our test server, while investigating I found this
( I am attaching log for your reference )
Details
Recording at local and central time........................ 25.03.2009 23:02:24
Task................ 15116 / Background Processor No. 18
User................ CSCADMIN_BC
Client.............. 050
Terminal............
Session............. 1
Transaction code....
Program name........ RSORAHST
Problem class....... K    SAP Web AS Problem
Development class... SBAC
Module name......... dbds
Line................ 798
Table name.......... 235
Field name.......... EXE
Documentation for system log message BY 2 :
After the attempt to call a database operation, the database system has
returned the error code specified in the message, which indicates that
the operation concerned could not be executed successfully.
Technical details
File................ 018863
Position............ 0000235620
Entry type.......... h      ( Database Error (Non-SQL)       )
Message ID.......... BY 2
Variable parts...... 235       EXE                                       dbds    798
The given program associated with this job SAP_PERIODIC_ORACLE_SNAPSHOT but this is run successfully on the test server.
Can somebody tell me the error & the rectification for the same
Thanks & regards
Shishir

Please check
- ST22 for dumps
- alert<SID>.log of the database
- dev_w18 tracefile
Do you use the same patches on both DEV and this system?
Markus

File to database error

Similar Messages

Maybe you are looking for