Filter Resolution Group in Normal Change on a specific organization

Hello,
We have a big business organisation in our company.
We are using SAP Normal Change in IT Service Management.
We have a field "Resolution Group" where you can search all the organisation,
in the search criteria window, we would to like to show only CH.ROOT organization (transaction ppoma_crm)
and hide the other organization.
How can do that ?
UI Component : BP_HEAD_SEARCH
View : BP_HEAD_SEARCH/SearchHelp

The thing is, the block module and the filesystem module are both loaded in my regular initramfs, and the presence of ext4 errors while mounting my USB key (it uses ext4) signifies that the system is actually using the right tool to do what it's supposed to.
The system has been installed via VirtualBox so the autodetect module may have messed things up. Going to recreate an initramfs image without it.
EDIT : It worked, sorry for bothering you guys, I could've found it sooner.
Anyway, as a note for others, if you plan on installing on a USB key to use it on other computers, remove the autodetect module from the initramfs, otherwise the required modules won't always be there.
Last edited by FreeSalad (2014-03-10 15:56:22)

Similar Messages

  • Sale group is automatically changing

    Hi Friends
    we hav defined plant for delhi (i.e) UDEL and sale groups D01 and D02 and also defined sales office also and assigned also
    we defined new customer(1000) with delivery plant UDEL and sale group D01 and material also defined with delivery plant UDEL.. now  we hav created new sale order with the defiend customer and material, then in sale order system is getting sales group as DO1and we saved sales order with out creating delivery
    now issue is when we open sale order through va02 screen sale group is automatically changing as D02 with out any one changing. how it is possiblbe?
    can any tell how sale group is changing automatically in sale order with out any one changing? how to solve this?
    <subject_changed>
    Please read the "Rules of Engagement"
    Edited by: Juan Reyes on Jun 18, 2009 10:01 AM

    Hi Friend,
    Check the assignment of Sales group to the sales office in the ENTERPRISE STRCTRE--->ASSIGNMENT
    Path: IMG->ENTERPRISE STRUCTRE->ASSIGNMENT->SALES ORGANISATION->ASSIGN SALES GROUP TO SALES OFFICE.Make sure the same sales office was entered during the sales order creation also.
    May be the issue with having dual sales office and sales group creation.
    Please revert if further clarification is needed.
    regards,
    santosh

  • PPS dynamic filter creation - not your normal thing but we need a solution, dont think Performance Point can handle it!

    My challenge at the moment is that I need to create a dynamic filter. To explain this is a cascading filter but not your normal cascading filter,
    ie, Year/Month/day etc.
    Here we have a single Dimension, Organisation. It contains every level of a business,
    Site,
    Dept, 
    Company name,
    Division
    Holding
    Strategic Area
    From these as a default we have 4 built hierarchies with a different combination of the above.
    Activity (Strategic Area, Dept)
    Organisation (company Name, site, Dept)
    Sites (Division, Site)
    Holdings(Holding, Strategic Area, site, Dept)
    At any given time we have have additional Hierarchies created within the Dimension, further adding to the hierarchy list.
    We now have a challenge where we require our users to be able to in the first filter select the Hierarchy they want to use, ie, Holdings, Site, Organisation
    or Activity. This should then cascade to the second filter and contain the relevant hierarchy and levels as a multi select filter. Of course this also needs to be connected to number of graphs, charts and scorecards on the page, dynamically. 
    I have gone around the houses to get this to work but not having any luck. Tried the variety of filters available, MDX, member selection, tabular,
    SharePoint, and attempted to mix and match to get this to work. I cannot find a way but I don't believe this is not possible.
    If it is not possible we must look around for another front end solution for our BI Dashboards which I would prefer to avoid. Any response or suggestion
    would be much appreciated.
    Regards,
    Sheb

    Hi Sheb,
    Please check the articles below and see if cascading filter in PerformancePoint Dashboard can be help:
    http://technet.microsoft.com/en-us/library/hh272541(v=office.15).aspx
    http://www.dotnetcurry.com/showarticle.aspx?ID=872
    Regards,
    Rebecca Tu
    TechNet Community Support

  • Not able to release normal change document for development

    Hello All
    We have Implemented ChaRM in SolMan 7.1 SP10
    Have created the Project and activated Charm with required DEV/QA/PRD logical component and before creating the Maintenance cycle, we did a check in the project which showed all green..
    We are able to create a request for Change and go till the approval, when we try to change the status to release for development, it is throwing the below error and not letting us go further.
    We have checked the MC phase, and it is in phase Dev with release.
    Project is in IN PROCESS state.
    IBASE and Component details are correct.
    Tried to put back to Validation and re tried for Development and this did not work.
    Until unless change document created successfully, we cannot go ahead even though MC phase is in DEV with release.
    I have seen few blogs and I have checked below steps
    system roles in SMSY
    Landscape system info
    Changed MC phase to DEV with release
    Strange why it is not allowing to create change document ???
    Please assist
    Thanks
    Sateesh.

    Hello,
    Three consistency checks are performed when you choose action "release for development" (resulting in the SMCR's status "being implemented"):
    PROJECT_ASSIGNED: Project is Assigned
    SYSTEM_EXIST: System assigned to collective change request
    FOLLOW_ON_GEN_OK: Change Documents Can be Created
    In case any of these checks fails, the SMCR's status returns to "approved".
    These same consistency check are also checked when the SMCR status is set to "approved". The behavior for a failed check, however, is different in this case. Just a warning message is shown on the top of the screen and the "approved" status can be set.
    Question 1: When you set the SMCR to "approved", those warnings are shown too?
    Perhaps there is something wrong with the assigned project.
    Check if the assigned logical component has the correct systems/clients.
    Check if the transport tracks between the systems listed in the logical component are working.
    Question 2: When you assign the scope (change type, in your case, Normal Change), some system data from the production system defined in the logical component are automatically filled (System, Client, Configuration Item, etc). Is this happening?
    Regards,
    Daniel

  • Resolution of my macbook changed to 256

    I was connected via bluetooth to another mac. When the other mac tried to send me a file via blue tooth the resolution of my computer changed to 256. I have tried to do many things to change it back and nothing works. Anyone has idea of what is happening?

    Goto System Preferences/Displays/Display tab and under Colors change it in the dropdown from 256 to Millions. That should change it back.

  • Filter based group - viewing contents

    Hi,
    I'm trying to figure out how to see if a filter defined group on a Sun One 5.2 Directory server is getting the objects required.
    The filter group was defined by someone else. I've got several LDAP search tools available to me, but can't get results that I expect.
    The group is defined as:
    objectClass: top
    objectClass: groupofuniquenames
    objectClass: groupofurls
    memberURL: ldap:///ou=People,dc=app,dc=sample,dc=com??sub?(&(objectclass=person)(uid=*)(ntuserdomaindi=*sample*))
    cn=Employees
    The group is defined in the tree as:
    cn=Employees,ou=Groups,dc=app,dc=sample,dc=com
    My expectation, using ldp, ldapsearch, or Softerra's LDAP Browser, is that when I attempt to open the tree looking at the 'Employees' group, I would see a list of the objects that the filter selected. I Don't see any thing.
    Am I looking this in a WRONG way, or is my query not working?
    TIA, Scott

    That's correct, senderbase reputation filtering occurs very early on. At the IP/TCP level of a connection. To get more info on this, check out the user guide on HAT Overview.
    Since senderbase reputation filtering occurs early on, even before the mail-from/rcpt-to/subject information are obtained, it is too late to enforce LDAP settings.
    However, what you can do with ldap is verify if the sender or recipient are a member of a certain group and then disable anti-spam/anti-virus/content filtering from their email. You would use ldap-from-group in conjunction with incoming or outgoing mail policies.
    To make an email immune from senderbase reputation filtering, you would need to know the IP/hostname/partial hostname of where their message is coming from and add that info to the whitelist sendergroup in the HAT overview.
    Is it possible to completely disable the reputation filter based on whether the recipient is in a certain LDAP group?
    I'm currently thinking no as LDAP groups are assigned a message filter and by this point in the pipeline the reputation filter has already been applied.
    Perhaps someone more experienced can confirm/disprove this for me?

  • ChaRM: Normal Change - Not possible to set "Successfully Tested" unless the Maint. Cycle is set to "In Development with Release"

    Hello,
    I'm doing some tests with ChaRM, Normal Change scenario.
    As far as I know, the following steps would be the correct sequence (concerning development and test phases only):
    1) Developers perform the correction in DEV and release their TASKS of the transport request
    2) Developer Lead set the Normal Change document status to "to be tested"
    3) In background, a Transport of Copies is created with all data previously stored in the original transport request. Then this ToC is transported into QAS
    4) Change Manager set the Maintenance Cycle status to "Test"
    5) Tester performs the test into QAS
    6) Tester provides a valuable feedback and set Normal Change document status to "tested successfully"
    According to the following SAP Portal article, it seems to be correct:
    http://help.sap.com/saphelp_sm71_sp10/helpdata/en/48/db938dceba518de10000000a42189c/frameset.htm
    During my tests, however, I have noticed that it is just possible to go from step 5 to 6 if the Maintenance Cycle status is set to "In Development with Release" (go a step back in the Cycle). Otherwise, I get the following error messages:
    Warning Message Details Status was reset by system
    Warning Message Details Action RELEASE_ALL cannot be performed during this maintenance phase
    Warning Message Next status cannot be set because some actions cannot be executed.
    Once I have done the Cycle status change, then it is possible to move from 5 to 6 without errors and then the original transport request is transported into QAS too.
    Question: Is this the correct behavior or am I missing customizing?
    Thanks in advance for your help.
    Daniel

    Hello Vivek,
    Thanks for your reply.
    It is kinda weird the steps sequence, since the Tester needs to tell the Change Manager to move the cycle's status before approving the correction done in QAS (successfully tested).
    Perhaps a new action between "to be tested" and "successfully tested" could exist, in order to request the CM to perform the cycle update.
    But OK, that's how it is.
    Regards,
    Daniel

  • Assign Condition to check TR imported in QAS -Normal change(SMMJ) solman7.1

    Hi ,
    I am configuring Cutsomizied Normal change in solam 7.1 SP3 release.
    After Original TR imported to QAS,i have set the status QAS import successsfull in ZMMJ.
    Also i am trying to assign the Condition  TR imported in QAS check, before status set to " QAS import successsfull".
    But i am not able to find the condition for original TR relase. only import of copies have the condition check.
    E0009     30     IMPORT_OF_COPIES_OK     CHM1_ACTION_LOG     046     Cancel
    Please help to find the condition.
    Rg,
    karthik

    Hi,
    SAP Note 1577453 is for Transport of Copies Import check.
    But i am looking for original TR import check condition in QAS system after gave customizied action.
    Rg,
    Karthik

  • Error when performing action Pass Normal Change to Test

    When we perform the action "Pass Normal Change to Test" we receive an error message. Reviewing the short dump in ST22 of our development ERP system provides additional information such as DYNPRO_SEND_IN_BACKGROUND, Screen output without connection to user, SAPLTMSU_ALT. Using this information we have identified two notes (49730 and 1497281, which is not applicable). We tried changing the user type for our RFC communication user (as per 49730), but that has not worked.
    Interestingly the Transport of Copies (which occurs when this action is performed in ChaRM) has been created in development. But it has not been released and ChaRM is not aware that the Transport of Copies has been created. If we move it outside of ChaRM we will lose this history.
    Has anyone experienced this issue? How did you resolve it?

    Hi Mathias,
    After checking each TMW RFC connection (in our TMS) and making updates as required; the main solution (as I see it) was in the TMSADM@ RFC connections. A couple had incorrect passwords and a couple had incorrect authorizations. Once I made the required changes and confirmed the RFC
    were working from an authorization perspective, I was able to successfully complete the action “Pass Normal Change to Test”.
    Hope this helps.
    Shawn

  • Pass normal change to test - CHARM

    Dear All,
    We are in process of implementing Charm system but we are facing a issue in it.
    We are able to create the request for change and after being released, change document is getting generated.
    First issue is change document directly moves to "in development" status instead of "created".
    Second issue, we create transport request--> do our activity --> release the task. Then when we change the status from "in development" to "Pass change to test" it gives a error. There should be creation of transport of copies but that doesn't occur and changes are not moved to test environment.
    Attached screen shot.
    TIA
    Regards
    Sushant

    Hello Sushant,
    For your first issue, please check the following SPRO Activities:
    1) Define Status Profile for User Status
    Path: Change Request Management > Transactions > Status Management > Define Status Profile for User Status
    a) look for Status Profile SMMJHEAD (or, its Z-version in case you have created it) and double-click on it
    b) the following screen shows the available transaction type statuses. Check if the flag "Init. Status" is checked for "Created" status (follow printscreen below)
    In case 1) is OK, verify:
    2) Define Action Profiles and Actions
    Path: Change Request Management > Transactions > Actions > Change Actions and Conditions > Define Action Profiles and Actions
    a) mark the correct action profile (default is SMMJ_ACTIONS)
    b) double-click on "Action Definition"
    c) look for Action Definition SMMJ_ON_CREATE_MJ; mark it and double-click on "Processing Types"
    d) on the Action Definition screen, in the "Settings Method Call" screen section, there must be assigned the HF_SET_STATUS method.
    Click on the Glasses Icon (display definition)
    e) check if the "initial value" column has "E0001" (it is the "Created" status for Normal Changes)
    Regards,
    Daniel

  • CHARM Normal Change Project Cycle empty

    Hi Gurus,
    We are facing an issue in Normal Change in CHARM. The Project cycle and current phase is empty (not auto populated) when we select Normal Change in Scope assignment block. It is working fine for Urgent changes. We have only one project active for both urgent and normal changes. Normal change works fine in CHARM development system. Can anyone please help me getting this fixed ?
    Current "phase is Development with Release". We are using Normal Change for the first time in production.

    Hi,
    Please see the screenshots of task list and project cycle (in web ui). We never closed our project cycle till now. We use Urgent changes regularly but our plan is to roll out normal changes now. Also, I noticed we have different number range mapped for normal change in production but not in development. Does that causes this issue ?

  • I set in prefferances plug-ins. Show all filter gallery groups and names, but they are still light gray and not selectable

    I set in preferences plug-ins. Show all filter gallery groups and names, but they are still light gray and not selectable

    They are being shown.  When Photoshop gray out items it means in the documents current state  that item is not supported,  Get the document into a state that the grayed out filters can be used.  Some filters mat not support some modes like CMYK. 32bit color, Lab etc. They seem to be listed but nor currently applicable. Note whem no document is open all are grayed out the when a simple clipboard image is open all are available.

  • Group alias & other changes

    Hi everyone--
    As you may already know, the iPlanet brand has been retired within Sun, and
    JATO is now a key part of the Sun ONE software initiative.
    To reflect this brand change, the alias of this discussion group will now
    change to "SunONE-JATO" instead of "iPlanet-JATO". This means that you will
    need to change the email address you use to post to the group to
    "SunONE-JATO", and also change any email filters you have. We are sorry for
    any inconvenience.
    Also, due to the retirement of iplanet.com, we are still trying to clear up
    some link issues on the Sun website. Until then, please use the links at
    the bottom of this message to find the Sun JATO homepage and download page.
    We will update the links when we have further information.
    If there are any questions about the changeover to the Sun ONE brand or
    anything else, or if you are having a hard time finding JATO or related
    info, please let us know.
    Todd
    Todd Fast
    Senior Engineer
    Sun Microsystems, Inc.
    todd.fast@s...

    I don't what is causing this. I just tried disabling and then re-enabling an alias (clicking 'Done' after each change) and encountered nothing untoward. I can only suggest contacting Support.
    If you currently happen to have AppleCare, either because you recently bought Apple hardware or have paid to extend the initial period, you can contact them here:
    http://www.apple.com/support/icloud/contact/
    You will need the serial number of the covered hardware. If you are not covered by AppleCare, then - in common with other free email services - there is no free support and you may be asked to pay a fee: you should point out that the problem seems to be caused by them and you should not be charged.

  • Lync Response Group Manager - cannot change opening hours

    Hi all
    I've run into an odd problem with Lync Response Groups with Lync 2013 Server. Just wondering if anyone has seen this before or knows of a solution. I've searched around but can't find any reference to this particular problem.
    Response supervisors who are defined in the workflow and are a member of the AD group CSResponseGroupManager cannot change working hours for their response group from a custom schedule to a preset in the web interface.
    If the workflow is already set to preset they can switch between existing presets, and they can switch from preset to custom. But once it has been set to custom they cannot change it back to preset.
    They can select to do so but when they click Save they receive an error on the page saying "The term 'Remove-CsRgsHoursOfBusiness' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the spelling of the name,
    or if a path was included, verify that the path is correct and try again."
    I don't believe this is by design, why would you want a workflow manager to be able to switch between presets or to custom but not back again?
    If they are a member of CSResponseGroupAdministrator this works, however this is not really a solution as members of this group can edit all workflows and we don't want the managers of a workflow for one department able to access the workflows of another.
    Any information greatly appreciated.

    Hi
    I had to abondon working on this for a while as we only had 1 Response Group in place, it wasn't too much hassle for me to do these changes myself.
    However we now have about 6 Response Groups. All are managed and have a user listed as manager in the workflow, that user is also in the CSResponseGroupManager AD user group.
    As previously described they can change the opening hours from between existing presets, and from preset to custom, but attempting to change back to preset from custom causes the error given previously.
    This does not occur if the user is a member of CSResponseGroupAdministrator, however putting our Response Group managers in this group is not appropriate as it gives them access to all Response Groups not just their own.
    Is it possible the error is due to the fact that the CSResponseGroupManager group is not giving them permission to the Remove-CSRGSHoursofBusiness cmdlet, I think PowerShell tells you a cmdlet doesn't exist if you don't have permissions to use it?

  • How can we change the assigned Family Organizer?

    How can we change the assigned Family Organizer?

    Hi J. Stephen G.,
    Great question! It is not possible to change the family organizer, however you can disband the group and restart it under a new organizer. For information on doing so, check out these resources:
    Leave Family Sharing - Apple Support
    http://support.apple.com/HT201081
    Family Sharing - Apple Support
    http://support.apple.com/HT201060
    - Matt M.

Maybe you are looking for