Finally got my 8800gt back from RMA and it artifacts, freezes and nvlddmkm error

The problems I am getting is the same before sending the card for RMA. Here's the problem with the card. It artifacts in games and freezed requiring a total system restart, sometimes if i am lucky i can call up task manager and end the game. Sometimes the screen would go black and you can hear the music in the background continue to play and sometimes the music loops over and over again. I can not get into playing any game now. It also artifacts on the windows desktop as well. Its so bad that it even happens when using Media player classic. it would just freeze and black out then the Nvlddmkm error would pop up and said it has recovered.
this card worked flawlessly for the first few months that i own it and then this happens. i believe its relating to bad memory on the graphics card, maybe??? i also have a msi 7300LE that i used during the RMA period, it has work without a glitch playing games and videos. it never crashed on me once. i was so glad to get my card back from RMA but only to be let down again.
The RMA process was pretty easy, it took less than a month. i believe they replaced the fan and top cover on my card for me, but i think its a memory problem on the card. I am not sure if they tested it before sending it back to me because the problem is still there.
Should i do a second rma, its going to take another month. 

Quote from: BOSSKILLER on 17-September-08, 01:56:30
Have you tested the VGA in another machine?
Have you tried with better PSU yet? {APEVIA are known as junk PSU}
Thats why I rma it in the first place, cause I didnt have another machine I can test it on. so I figure MSI will be able to determine if its working or not. I dont have another power supply I can test it on. Do you think if i bring the graphics card to best buy or circuit city do you think they will do a test run on the card for me for free?
I am still leaning more toward a graphics card problem than a psu problem. Yesterday I was messing around with Riva Tuner I underclock my speeds to 590/14XX linked and 890. I was able to get into game play for like two minutes and then bam it freezed again. the core temp is at 45c to 55c. So its not  related to heat issues.

Similar Messages

  • Just got my Nano back from service and.....

    I just sent my 2Gb Nano into Apple care and got it serviced. I just got it back and got a completely new Nano. My problem is that this one has a white screen and I havent dropped in or done anything, except plug it into my computer and install it on my computer. I was wondering if I had to send it back in again. Thanks.
    Dell   Windows XP  

    From what I was told by one of the forum Mods a while back, Apple engineers have determined that this is caused by not allowing the firmware update to finish the installation before disconnecting the iPod. Try these steps.
    Reset the iPod.
    If the reset doesn't help, then put the iPod into forced disk mode.
    How to put the iPod into disk mode.
    Now connect the iPod to the computer. This step may immediately take you to the iPod's normal display screen. Reset the iPod to exit disk mode.
    If you still have the white screen, then you should use the updater to restore the iPod.
    Wait until the restore has finished before disconnecting the iPod. If you're unsure, wait at least 20 minutes (it's probably overkill but best to be sure). In my experience, the software updater for version 1.1.1 (and later) takes longer to complete the process than previous updaters.
    That should cure the issue.
    If however it doesn't, and your iPod is still non responsive (doesn't reset, nothing on the screen or button presses don't work), then it will have to be sent away for service.
    See: iPod service request.

  • Buyer got the money back from Paypal and buyer don't want to send the item back

    Hi everybody, I sold a laptop on Dec 2014 via eBay. After three months, there are some issues with the laptop so buyer had to send it to the manufacture for repair (Still under Lenovo warranty). After that, buyer had to send the laptop to manufacture again due to motherboard problem (Lenovo agree to fix it for free because it's still under warranty). Buyer complained that the computer is not as described. (I listed the item as like new because it's open box item, I also mentioned open box in the eBay description, I also refunded $100 when the buyer received the laptop, he said there are some scratches on the case, and he accepted the offer, I still have our conversation via eBay message) By the time I sold it, the laptop still under warranty for approximate 2 and a half year. Regarding to eBay policy, buyer cannot file a claim after 30 days, so he decided to file a complain via PayPal. I don't sell much on eBay so after I sold the laptop, I don't check my PayPal email anymore, once day when I check my email, I realized the case has been opened for approximate 19 days, which mean I was late to respond to the case 4 days. PayPal decided to refund to the buyer. I contacted PayPal several time, they said they couldn't do anything because I didn't respond to their email. I contacted Buyer and he told me that he will consider my email as harassment. I sent him another email a couple weeks ago and he didn't respond to my email. As a result, I still have to pay for eBay fee (approximate $50), and I lost the laptop $1300 value. Even he send the laptop back to me at this time, the laptop will not have the same value as before, but I still not receive the laptop anyway. It like 8 months from now. I filed a complain to ic3.gov but I still not hear anything from them. Does anyone have the same experience with me? Do you have any suggest? I have moved from WA to Texas, I don't know if I can file a case in Texas since the original issue happened when I was in WA.  Any response is appreciated, Thank you very much.

    1. Fwd your complaints to Apple, not this forum
    2. http://www.apple.com/feedback/iphone.html
    3. Have a good day!

  • Got my new board from rma and it works.

    Msi replaced my 865PE Neo2-P and it is working fine so far So I was wonting to know if any of the utilities that msi has to download  are good like the one for the network utilities for high spped cable ?  And I have not seen the intel chipset excelorater utilitie, ?
    865pe neo2-p
    P4 2.4 533 512k
    2 512mb mushkin ddr
    ati 9200  128mb
    ati tv wonder pci
    via 1394 card
    2 wd 100 gb 8mb buffer drives
    panasonic dvd-r
    philp dvd+r
    Got it set to turbo.

    Simply, NO on MSI utilties.........
    IAA is not supported on ICH5 chipset.........unless you have raid version
    Del

  • Just got my MBP back from repair and VERY confused...

    Good Afternoon,
    Well, I just picked up my beloved MBP 2.2GHZ SR / 128MB Video Ram 8600GT from repair after a LCD / Logic board / Top case replacement under warranty.
    When I powered it up to test things, I went to System Information and my Mac stated it was a 2.6GHz SR / 256MB Video Ram 8600GT / 800Mhz FSB.
    Am I just really confused or did I get a serious upgrade wih this repair?
    Thanks in advance!
    DebtManWalking

    maybe it was cheaper for apple to replace with an equivalent/better model than fix the old one, the warranty terms allow for this

  • Got desk top back from shop and lost my  download, how can I reload PS and LR ?

    how can i re load

    Creative Cloud Help / Sign out, Sign in | Creative Cloud desktop app
    http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
    Creative Cloud Help / Install, update, or uninstall apps
    http://helpx.adobe.com/creative-cloud/help/install-apps.html
    Installing Creative Cloud Apps
    http://tv.adobe.com/watch/cs6-creative-cloud-feature-tour-for-video/installing-desktop-app s-from-creative-cloud/

  • I just got my Mac back from Apple repair and I can't burn a disc. What do I need to do to make that happen?

    I just got my Mac back from Apple repair and I can't burn a disc. What do I need to do to make that happen?

    Hello deneye2112,
    Thank you for providing the details of the burning issue you are experiencing.  I found some resources that I think might help:
    First, I recommend resetting the System Management Controller (SMC) on your Mac (I wasn't sure if you had a removable battery or a built in battery, so I listed the steps for both):
    Resetting the SMC on Mac portables with a battery you can remove
    Note: Learn about removing the battery on MacBook and MacBook Pro.
    Shut down the computer.
    Disconnect the MagSafe power adapter from the computer, if it's connected.
    Remove the battery.
    Press and hold the power button for 5 seconds.
    Release the power button.
    Reconnect the battery and MagSafe power adapter.
    Press the power button to turn on the computer.
    Resetting the SMC on portables with a battery you should not remove on your ownNote: Portable computers that have a battery you should not remove on your own include MacBook Pro (Early 2009) and later, all models of MacBook Air, and MacBook (Late 2009).
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer.
    Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
    You can find the full article here:
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/HT3964
    If you are still having trouble with burning after that step, I recommend reviewing the section titled "Top troubleshooting tips" in the following article:
    Disc Burning Quick Assist
    http://support.apple.com/kb/HT1152
    Thank you for posting in the Apple Support Communities.
    Best,
    Sheila M.

  • My hard drive went and when i got my computer back from being fixed my itunes had been deleted, so i re installed it however my ipad wont connect to the itunes as its not registered to this itune, also all my songs arent on here what do i do?

    My hard drive went and when i got my computer back from being fixed my itunes had been deleted, so i re installed it however my ipad wont connect to the itunes as its not registered to this itune, also all my songs arent on here what do i do?

    There is no such thing as an "SG3" or "SG4".  Did you possibly mean a 3GS and iPhone4?
    It has always been very basic to ensure that a backup exists of your media and other important files.  Computers fail, hard drives crashes... things happen.  Do you not have a backup?  The iPhone, like all iDevices is NOT a backup of your media, but rather a mirror of the content in the iTunes library on your computer.
    If your contacts, pics, etc are not on your computer, no backups of the iPhone exist, and they are not on the phone, they are gone.
    No one can magically make them re-appear.

  • Just got back from Paris and Israel and this update got my iphone 5 in recovery mode !!! please somebody tell me that I did not loose all my pics and videos !!!

    Please somebody help me !!!! I just got back from Paris and Israel and this update got my iphone 5 in recovery mode. I can't loose all my pics and videos from my vacations ??????????????????????????????????

    NOO it's not broken it is a software error. What you need to do is put your phone into what is called DFU mode or Device Firmware Upgrade Mode. What you have to do is connect your phone to itunes but do not start the sync process. Ignore any popups from itunes initially. When you are connected to itunes take your phone and hold down the home button and power button at the same time. Hold them down for about 30 seconds or so and you should see your device screen rollover to the black screen and disconnect from itunes once this happens it will reboot and automatically connect to iTunes, after this happens start the restore process through itunes and it should continue past the error message.
    * Also before you do this try ejecting your sim card if you have the at&t model if you are on Verizon ignore this. There is a small oval port on the right side of the phone with a small pinhole. Use a paperclip and insert it into the hole, the door will pop open. Take the door out, remove the sim card and wait 5 minutes then return the sim card back into the phone and begin the above process.
    If none of this works you may just want to bring it the genius bar and have them look at it. Good Luck and I hope this helps!

  • Ok so I got my iPod back from the Walmart care plan. My iPod broke so Walmart fixed it. But now I any sign into iMessage or FaceTime! And I really want to text and FaceTime.  So please help!! Thank you!!

    Ok so I got my iPod back from the Walmart care plan. My iPod broke so Walmart fixed it. But now I any sign into iMessage or FaceTime! And I really want to text and FaceTime.  So please help!! Thank you!! ☺

    Maybe:
    iOS: Troubleshooting FaceTime and iMessage activation
    iOS: Troubleshooting FaceTime
    iOS: Troubleshooting Messages
    It is not clear what "But now I any sign into iMessage or FaceTime! " means

  • HT201263 hey! my i just got my ipad back from having it taken away for a long time and i have know idea what the passcode is ive tried everything and i have no idea what to do

    hey! my i just got my ipad back from having it taken away for a long time and i have know idea what the passcode is ive tried everything and i have no idea what to do

    Restore, if iTunes will let you.  Everything except the password will be restored.  Connect via cable to the computer that you use for sync.  Be forewarned that it takes a long time.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore and you have IOS-6 or lower, go into Recovery Mode per the instructions here.  If you have IOS-7, read this.

  • Have just got my iphone back from my daughters who has been using it. I have put my sim card in and cannot update it or do anything as it is stating emergency calls only. it only recognises on itunes as her iphone what should i do please

    i have just got my 3gs back from my daughter and i have put my sim card in and it comes up as emergency calls only. That is my first problem then when i plug it into itunes it only recognises it as her iphone can anyone help my please ?

    I agree with wjosten. Sounds like a sim card issue. Was your sim card removed from a working,activated phone? I've switched sim cards in an iphone multilple times and never had a problem. You might try removing the sim card and reinstalling.

  • Just got my computer back from being fixed and can not load Itunes

    Just got my computer back from being fixed, they took Itunes off. Now trying to download it again and this is what happens, it says thanks for downloading Itunes, but it never launches nor can I find it anywhere on my computer. It doesnt launch when I plug my phone in either. I did notice that it says it downloaded a Binary file? This is on windows XP and Im not good at this kind of thing. Can anyone please help me.

    try downloading a little bit older version of itunes, thats all i got

  • Speedster2 back from RMA

    Hey guys..
      Just got my Speedster2 (MS-9661) back from RMA. Reason for RMA was system died. No power, no spinning fans, no beeps.. Just dead. And yes, all the parts were tested on another older board (MS-9652). Everything works great. Even the power supply (850w Corsair).
    I talked to MSI-LA techs. They said it sounded to them like a voltage regulator issue. So, the board was RMA'ed.
    Board is back. Assembled everything on my bench. Powered on, everything looked good. Wait. no display (onboard video).. Hmm..
    I moved the cmos jumper to clear. I installed an old X850 pci-e video card. Powered on.. still no display. hmm..
    I removed the video card and the second CPU. (CPU1). Powered on and it worked flawlessly.. So.. I fried my processor..
    Lets make sure.. Removed the processor from CPU0 and put the processor from CPU1 in its place. Powered on and to my surprise, it worked again flawlessly.. hhmmm..
    Put the removed from CPU0 into CPU1 socket.. Cleared cmos for 2 hrs. Fired up and WOW! nothing again..
    Ok.. Clear cmos again. moved it back at 4am this morning and moved the ram around. Still nothing.. And yes, the CPU's were always with there heatsinks mounted and fans plugged in
    Anyone with suggestions?
    Thanks

    New Update!
        My RMA has returned. Well, they could not repair the board. The reason it took so long to get it is because they requested a replacement from Taiwan. The bench tested it for 72 hrs and then repacked it shipped to me. The replacement board even has the chipset fan that my old one did not.
    All assembled.. Fired up and working beautifully! I didn't have to do anything but assemble. I formatted my hdd and installed Windows 7 64bit. Smoooth installation!
    The replacement board arrived yesterday afternoon. I assembled the system this morning. 2 hrs later windows 7 installed. This just tickles me!     

  • I got my MBP back from AppleCare, LCD whine fixed!

    Hello, I just got my computer back from AppleCare to get the screen whine repaired. It quiet as ever and I'm very happy. I've had no issues with CPU whine, ever.
    -Jacob

    Congrads! It's always nice to hear something positive from Apple. They don't have time to do it right the first time but they have plenty of time to it over again. Either way, its stories such as yours that keeps me from canceling my MBP order which scheduled for 30 March shipment. If it takes longer I will be happy to wait. Reason: I'm praying for a serial number: W8610xxx or grater, meaning manufacturing date of: "86" = 2006 / "10>" meaning week ten or greater in the production cycle. I would be even happier if shows week "11" or "12" in the suffix since Apple has identified units with serial numbers of: W869xx… or below that are more susceptible of having a defective “inverter” w/noise that emits from the upper right corner of the keyboard. This valuable information comes from another Discussion Member who got lucky with an honest and knowledgeable tech support dude at Apple.
    Regards, Digital Dude
    MacBook Pro 2.16 (on order)   Mac OS X (10.4.5)   G4 Tower (OS 9/10), Dell 620 WorkStation (XP Pro), Gateway P4 (XP Home)
    MacBook Pro 2.16 (on order)   Mac OS X (10.4.5)   G4 Tower (OS 9/10), Dell 620 WorkStation (XP Pro), Gateway P4 (XP Home)
    MacBook Pro 2.16 (on order)   Mac OS X (10.4.5)   G4 Tower (OS 9/10), Dell 620 WorkStation (XP Pro), Gateway P4 (XP Home)
    MacBook Pro 2.16 (on order)   Mac OS X (10.4.5)   G4 Tower (OS 9/10), Dell 620 WorkStation (XP Pro), Gateway P4 (XP Home)

Maybe you are looking for