Find Button of JUNavigationBar

I am using a NavigationBar which is bound to a view and want to use the find mode to search entries in this view which is independent of any other views in my application module. Although the NavigationBar itself is working, it also switches all other Panels (bound to other views) to find mode and after the query is executed the cursor of the other views is set to the first row. This is what I want to avoid, so I don't want the other Panels to switch to find mode and want to have the rows selected I had before executing the query. What is the best way to achieve this?You can create the Navbar and it's View in a separate panelBinding than the rest of the views. FindMode is set on the panelBinding as a whole, so every IteratorBinding in a panel turns into find mode when any NavBar bound to a View in that panelBinding is set to findmode.

Similar Messages

[Feature Request] Better support for new buttons in JUNavigationBar

In my project I use a home made sub-class of JUNavigationBar, which contains some new functionality apart from a new button as well. This button allows me to refresh the currently selected row.
However, since I added this button though a simple this.add(), some of the functionality in JUNavigationBar may get confused.
For example, when I have removed some of the standard buttons but left my own button in place (setHasXXX()), the component index (calculated in JToolBar) and the array index for the buttons in JUNavigationBar may not match. This occasionally causes an ArrayIndexOutOfBoundsException.
In short, what I'm asking for, is a better way to manage buttons on JUNavigationBar. Even making the array of buttons and related methods and such protected in stead of private (so that my sub-class could handle it) would be a good start.

Hi Arno,
I had a similar issue with trying to create a Nav bar with dynamic content. My solution was to leave all the standard buttons in place and to use setVisible(x) to make them appear or not as required.
BTW have you noticed that rollover behaviour isn't consistant ie works for FIRST/LAST etc but not for FIND/QUERY.
Regards
Andy

Find button on toolbar won't search current page

Post Author: sarasew13
CA Forum: .NET
I'm having an issue with the Find button on the standard report viewer toolbar for ASP. When I enter a search term and click on find, it starts searching on the next page even though there are entries (several) that match on the current page.
I found one mention on the internet that says it only searches forward (if you search from page 5 you won't get the entry on page 2) which is fine. However, this keeps the user from searching from page 1 (for example) when they are on page 1. If this is forward only (and that was only mentioned on a site not related to Microsoft or Crystal) then shouldn't it still look on the current page?
Anyone else have this issue?
Sara

Post Author: Ted
CA Forum: .NET
Yes. I'm using Crystal Reports for VS 2005 (ASP.NET). I don't see much written about this issue, but it sure annoys me, and my users won't like it either. Unless there is a better alternative, I'll remove the Find feature from the reports completely so that I don't have to deal with user complaints. They can use the browser Find to search a page at a time, or export the report and search using the exported format's application.

How to enable the 'FIND' Button in Module Pool Screen. Logic please

Hi All,
   I am writing one Module Pool Program. I have one requirement like I have to put FIND, FIND+ buttons on different screens.
   I am able to do the code for normal FIND. According to my requirement I have to display one Popup when the user click on FIND button. Once he entered some value it should find all the records and all the fields and display the list of hits in another popup. This whole process should as same as in SE11 Transaction functionality.
   Example: SE11 ->Table Entries -> and click the FIND Button. I need the same functionality in my Program.
   Please let me know ASAP. If you provide some code sample it will be Great.
Thanks & Regards
Kiran

Hi
If you have just implemented the code for FIND I believe u need to add some little modifications for FIND+.
U need only to manage the position of the last found value, so u need to go on from that position for FIND+.
The position should have the two coordinates X (the position in the record) and Y (the number of the record):
- FOUND should start for postion = 0, 0
- FOUND+ should start for position = X, Y
Max

UIX Master-Detail - Find button does not display detail lines

Hello,
We have a master-detail UIX page. Master has one attribute only. When 'Next' or 'Previous' buttons are pressed, the next master-detail records are displayed.
However, when master attribute's value is changed by the user and the 'Find' button is pressed, the new detail lines are not displayed. Also we get following error:
JBO-26080: Error while selecting entity for <ViewObject>
Has anyone experienced this issue before?
Thanks, Ali.

Please dis-regard this post. The correct sequence is to click on Find button, enter new value then click on Execute button to query new values.
Thanks, Ali.

If i press the Find button didn't get the all fields

Hi...........
If i press the find button only two fields get the values remaining fields didn't get the values
:CONTROL_1.ASSET_NUMBER := i.asset_serial_numebr;
:CONTROL_1.INSTANCE_NUMBER := i.serial_number; ---------------only this two fields are inserted.
actually in loop first i taken those two fields then i taken begin i wrote select statement it's not working i think tats why only two fields are get the values.
i wrote this code in find button
declare
     cursor c1 is
     select aa.serial_number asset_serial_numebr,
aa.instance_number serial_number
from mtl_eam_asset_numbers_v aa,
mtl_eam_asset_attr_values av
where aa.serial_number = av.serial_number
and aa.MAINTENANCE_OBJECT_ID= av.MAINTENANCE_OBJECT_ID
and av.attribute_category = 'Expected Life Details'
and av.c_attribute3 not in ('Stolen','Under Disposal')
and aa.inv_organization_id = :global.ORG_ID
and aa.inventory_item_id = :CONTROL.INV_ITEM_ID
order by aa.serial_number;
     cur1 c1%rowtype;
begin
     open c1;
     fetch c1 into cur1;
     if(c1%NOTFOUND) then
          go_block('CONTROL_1');
     clear_block;
          fnd_message.set_string('Asset not available for selected group');
     fnd_message.show();
raise form_trigger_failure;
     end if;
     close c1;
     :parameter.RECORD_COUNT := 0;
     go_block('CONTROL_1');
     clear_block;
     first_record;
     for i in c1
     loop
          :CONTROL_1.ASSET_NUMBER := i.asset_serial_numebr;
          :CONTROL_1.INSTANCE_NUMBER := i.serial_number;
     begin
     select
     depr_method,
     commision_date,
     asset_cost,
     asset_life,
     salvage_life,
     period,
     months,
     pre_depr_cost,
     pre_cost_after_depr,
     remarks
     into
     :CONTROL_1.DEPR_METHOD,
     :CONTROL_1.COMMISION_DATE,
     :CONTROL_1.ASSET_COST,
     :CONTROL_1.ASSET_LIFE,
     :CONTROL_1.SALVAGE_LIFE,
     :CONTROL_1.PERIOD,
     :CONTROL_1.MONTHS,
     :CONTROL_1.PRE_DEPR_COST,
     :CONTROL_1.PRE_COST_AFTER_DEPR,
     :CONTROL_1.REMARKS
     from xxeam_depreciation_master
     where org_id = :global.ORG_ID
     and inventory_item_id = :CONTROL.INV_ITEM_ID
     and instance_number = :CONTROL_1.ASSET_NUMBER;
     exception
          when no_data_found then
          null;
     end;
     :parameter.RECORD_COUNT := :parameter.RECORD_COUNT + 1;
          next_record;
     end loop;
     first_record;
end;
Please give me any solution................
Regards
Mohan

Mohan,
We cannot read your mind, so you need to describe what you are trying to do in greater detail.
And always post your indented code in code tags like this, {code}..your code here..{code}
begin
open c1;
fetch c1 into cur1;
if(c1%NOTFOUND) then
go_block('CONTROL_1');
clear_block;The Fetch is not in a loop, so only the first row will be read.
And then suddenly we see
for i in c1
loop
next_record;
end loop;And what FOR i doing in this place? Where is the fetch for the second record onwards?
Too many errors in the code.
Regards,

Find button

Hi Everyone,
I have a screen displaying 3 alv grids, and I have created through menu painter standard toolbar. In that toolbar I have find and find next buttons.
My requirement is if I press find button it has to search in the grid on which focus is present for the specified string like the find functionality present in the alv grid toolbar.
How can I implement this.
Any help on this, sample codes will be greatly appreciated.
Thanks a lot,
Prashanth.

check this program to find how you can manage the grid toolbar button click event from outside.
BCALV_TEST_GRID_TOOLBAR
Regards
Raja

Show result before I click "Find" button~

HI ALL~
I have a problem~
ex: A-Group has "Find Page=true"......
when I navigate FindA-Group.jsp , there has result in the page before I press "FIND" button.(I combine fine page and result page to same page).Of course,I can input some data in query columns,and to find.
Could it to accomplish??
How to do it??
my JheadStart vision:9.0.5.1.8
Using JSP.

Spray,
I don't exactly understand your problem. I assume that you have applied the section from the JHeadstart tutorial called "Find page and result table in same page".
I assume that the current behavior is that initially (when you first enter the page) you do not see the result table, and that you would like to change that so that it initially shows all rows?
If that is the case, you could try re-ordering the Struts actions that are performed: first perform a find before you go to the page.
Hope this helps,
Sandra Muller
JHeadstart Team

CSF Phone configuration Find button

We have two clusters.
1 here in the US and 1 in Germany.
The one in Germany has a "Find" button next to the "Owner User ID" and one next to the "Primary Phone" entries.
Anyone know how to enable this on our CUCM here in the US?
I opened a TAC case and they say they dont have it either. LOL
Thanks in advance for any help.

Maybe in the Enterprise Parameters?
It will only let me go down to 250 on the Max lookup Items..
I have 150 Users on this system. My other system has 1600+.
grrr... so close! It is such a pain adding the primary phone this way...

BLF SpeedDials NO Find Button

Hi Guy,please take a look to the picture attached .
I can't find the Find button to be able to search for directory numbers,instead of uing the drop down list.
I have this button in different cucm servers other than this one i am working with now.

Ahmed, did you read my post above
Here is mine on CUCM 8.6.I think it depends on the amount of DN that you have. If your DN exceed the amount that can be seen in the drop down menu, then the find button appears
It depends on how many Extensions you have.
Please rate all useful posts
"opportunity is a haughty goddess who waste no time with those who are unprepared"

Name Dialing and Find button in Device Profile

I have two questions.
1. How do I enable "Name Dialing" option in CUCM 8.6, I dont have that option in End user Configuration.
2. How do I have "FIND" button next to Phone Button Templet in Device Profile configuration window.
Thanks

Name dialing not even sure where you got that screenshot, I also don't have it
Find is only available when you have so many phone button templates and they cannot be shown in the dropdown.
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk

Cant use find button to open query

Hi Experts,
I am having a problem when i use the find button to try and open a query; when i click on the queryto open it get this error:"A critical program error occurred, the program has to close. Please refer to the trace for further information"
Does anyone know what can be causing this?

Hi,
Follow the way the link below.
https://websmp103.sap-ag.de/patches >> Support Packages and Patches" SAP Frontend Components" SAP GUI FOR WINDOWS" SAP GUI FOR WINDOWS 7.10 CORE >Win32
There you can find patch level 1 for sapgui 7.10
Regards,
Please do not forget reward points for good answers.

Remove Find Button in BEx tool

Hi all,
I use s_rs_fold object to remove other buttons on BEx analyzer. However, the find button allow user to find other queries. How do I remove the find button in BEx?
Alan

You can't hide the find button. But here is my activity:
S_RS_COMP
Activity                       16
InfoArea                       *
InfoCube                       *
Name (ID) of a reporting compo *
Type of a reporting component REP
S_RS_COMP1
Activity                       03, 16
Name (ID) of a reporting compo *
Type of a reporting component *
Owner (Person Responsible) for *
Good Luck,
Allen

Activate "Find" button in PO13

After upgrade to 4.7 from 4.5, the "Find" button (below the menu bar, next to the Print button) in Transaction Code PO13 Maintain Position is greyed-out (deactivated).
How can I activate the "Find" button ? Thanks.

Within a Position, a number of Activity Groups have been assigned. Have to page up and down to locate the required Activity Group.
Any "Find" facility within PO13, to locate the required Activity Group within a position ? Thanks.

No " Find " Button in CUCM End User Configuration

Hello Community, we have two different 8.6.2 CUCM with the same Version.
I visit the two CUCM w/ the same PC and Browser. I go to End User Configuration and Edit one of the Users. I do this on both of this CUCM. At one of the CUCM I see the "Find Buttons" to search for example " Controlled Devices " and at the second CUCM no Find Button there. It is at more Configuration points in End User Configuration and not depend from the End User. The CUCM Version is exactly the same!
Andy Idea appreciate!
Really Thanks Armin
HTH, please rate all useful posts!

Hi Jaime, Really thanks for your support and effort. It should be right!
Please see the count of entrys :-)
w/ the find button we have near 36.000 device profiles entrys
w/o find button we have 38 device profile entrys.
I can´t find anything in srnd etc.... regarding the limit.
For doublecheck I would increase the count of Deviceprofiles.
From which limit the "find button appears"?
HTH, please rate all useful posts!

Find Button of JUNavigationBar

Similar Messages

Maybe you are looking for