Firewire not on profiler

I have an iMac. I was doing an OS X and security update. When I went to 'restart" the computer would not get past the white page gear wheel. I called Apple, and was walked through a reboot with my startup disc by a specialist (it took a while). That part worked OK.
But, I had two external drives on firewire. One of them came on line. the other one did not. I changed cables. But the second drive still did not come up. Is it possible the original iMac failure to reboot caused a problem with this drive?
I am about ready to take the drive to a data recovery firm and see if the data can be retrieved. I am hoping there is a simple correction before I do this expensive move..
Seagate was of little help.

Ah! Then may aI suggest you repost in the forums for Intel iMacs here:
http://discussions.apple.com/category.jspa?categoryID=189
This forum, for the older G4 iMacs with the "desk-lamp" monitor arm and hemi base, is poorly labeled and commonly leads owners of newer iMacs to the wrong spot.

Similar Messages

URGENT FIREWIRE NOT DETECTED

Hi.
I've just bought a new intel iMac 2.66ghz and installed FCS.
I just attempted to capture from a dv tape for the first time and it came up with the message...
"unable to initialize tape deck, you may still log offline clips or use capture now"
when i attempt to use capture now it says..
"attempt to capture video without a video device selected. please select a video device in your capture presets and try again"
I have the capture settings set to Firewire PAL DV PAL 48khz Anamorphic
I am capturing off of a Panasonic NV-GS320 - I've captured off of this camera onto an iMac in the past (a white one, I'm assuming it was not an intel based)
When i try and check if the camera is detected in the system profiler it says "unable to list firewire devices" next to the word 'warning'
However when i have no firewire cable inserted it says nothing except the max speed.
Is my firewire not being detected or is faulty?
Can anyone help me please!? I have a project due in that i need to start but i cannot capture!
Any help would be Much appreciated

Have you done all of this:
In the FCP menu bar, go to Final cut Pro > Easy Setup. Choose DV PAL. Click OK.
Go to Sequence > Settings and click on "Load Sequence Preset". It will already be set to DV PAL, confirm by clicking OK. Make a new project file with these settings. Try capturing your material again.
What version of Final Cut Pro are you using ?

Firefox doesn't open, but is open in Processes in Task Manager, not even profile manager opens up for Firefox opens up. Please help

I'm using Vista, 32 bit - not even downloading the beta version of Firefox 4 helps; it downloads (just like the regular version of Firefox, 3.4) and I can install it, but trying to run it gives me nothing - no warning, no text; it just doesn't open up, but is still visible in my start menu, programs folder and in task manager. And not even profile manager opens up.

Make sure that you do not remove your personal data when you uninstall Firefox. Then you won't lose personal data stored in a different location in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder].
See also http://kb.mozillazine.org/Profile_backup and [[Backing up your information]]
A possible cause is security software (firewall) that blocks Firefox. 
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox. 
See [[Server not found]] and [[Firewalls]] and http://kb.mozillazine.org/Firewalls
See also http://kb.mozillazine.org/Browser_will_not_start_up
Do a malware check with a few malware scan programs. 
You need to use all programs because each detects different malware. 
Make sure that you update each program to get the latest version of the database. 
*http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
*http://www.superantispyware.com/ - SuperAntispyware
*http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
*http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
*http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
See also "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked and [[Searches are redirected to another site]]

Suddenly getting UserNotFoundException: User Not Found: Could not load profile data from the database

Starting yesterday (I believe) we are suddenly receiving a "User not found" error when trying to view a user's profile page when clicking on their name (in search or elsewhere) via the url
https://www.contoso.org/Person.aspx?accountname=contoso%255Cmyuserlogin
This is happening for all users. (but profiles exist and seem ok, and sync with AD is running fine) When looking in the logs I see the error (full ULS log is later below)
Exception in LoadRequestedUserProfile: (Microsoft.Office.Server.UserProfiles.UserNotFoundException: User Not Found: Could not load profile data from the database.
The only clue of what MAY be going on is just before that I see the following two lines which came up after I changed the Database logging to Verbose:
ConnectionString: 'Data Source=INSTANCE;Initial Catalog=UPAPROFILEDB;Integrated Security=True;Enlist=False;Pooling=True;Min Pool Size=0;Max Pool Size=100;Connect Timeout=15;Application Name=SharePoint[w3wp][3][UPAPROFILEDB]' Partition:
NULL ConnectionState: Closed ConnectionTimeout: 15
SQL connection time: 0.0456 for Data Source=INSTANCE;Initial Catalog=UPAPROFILEDB;Integrated Security=True;Enlist=False;Pooling=True;Min Pool Size=0;Max Pool Size=100;Connect Timeout=15;Application Name=SharePoint[w3wp][3][HNet3_Svc_Prod_UPA_Profile]
If I am reading that correctly, does it mean the connection to the database is timing out instantly? I am able to use powershell to pull up profiles and print them to the screen while on the webservers. And it's only the one specific page that is not
working.
What sort of tests or further debugging can I do for the error above?
We are on premise, SharePoint 2013 sp1, sql2012, server 2012, claims using the full SharePoint Profiile Sychronization against AD. Farm has been running since last august. Last week the admin team did run windows update on all servers, I can't be sure
if it was broken for 5 days and no one noticed or if it broke yesterday.
I already did the following:
Verified the profiles do exist in central admin.
I can still access their personal sites directly via
https://www.contoso.org/personal/myuserlogin
I checked the ProfileDB database and made sure the service accounts for the UPA has dbowner, so does the farm account, and the web application pool has SPDataAccess.
Verified the AD sync account has proper rights in AD.
I reran a full synchronization which ran with no errors.
File systems on the webservers and appserver have plenty of free space.
Rebooted every server in farm
I even checked the bin directory of the mysite webapplication, (since once I had a weird problem where access to bin was removed.) WSS_ADMIN_WPG, WSS_RESTRICTED_WPG_W4 have full control and WSS_WPG,IIS_IUSRS all have read and execute.
I opened powershell on the webserver I can indeed load profiles and print their values.
Timestamp Area Category EventID Level Message Correlation
07/25/2014 14:11:08.43 SharePoint Foundation Monitoring nasq Medium Entering monitored scope (Request (GET:https://my.hungernet.org:443/Person.aspx?accountname=FA%255Ccbuchholz)). Parent No
07/25/2014 14:11:08.43 SharePoint Foundation Logging Correlation Data xmnv Medium Name=Request (GET:https://my.hungernet.org:443/Person.aspx?accountname=FA%255Ccbuchholz) be11a89c-fbe8-a08d-57d2-afa6a4948743
07/25/2014 14:11:08.43 SharePoint Foundation Micro Trace uls4 Medium Micro Trace Tags: 0 nasq be11a89c-fbe8-a08d-57d2-afa6a4948743
07/25/2014 14:11:08.43 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Request (GET:https://my.hungernet.org:443/Person.aspx?accountname=FA%255Ccbuchholz)). Execution Time=1.3859 be11a89c-fbe8-a08d-57d2-afa6a4948743
07/25/2014 14:11:08.47 SharePoint Foundation Monitoring nasq Medium Entering monitored scope (Request (GET:https://my.hungernet.org:443/Person.aspx?accountname=FA%255Ccbuchholz)). Parent No
07/25/2014 14:11:08.47 SharePoint Foundation Logging Correlation Data xmnv Medium Name=Request (GET:https://my.hungernet.org:443/Person.aspx?accountname=FA%255Ccbuchholz) be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.49 SharePoint Foundation General ajji6 High Unable to write SPDistributedCache call usage entry. be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.50 SharePoint Foundation Authentication Authorization agb9s Medium Non-OAuth request. IsAuthenticated=True, UserIdentityName=0#.w|fa\cbuchholz, ClaimsCount=167 be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.50 SharePoint Foundation Files ak8dj High UserAgent not available, file operations may not be optimized. at Microsoft.SharePoint.SPFileStreamManager.CreateCobaltStreamContainer(SPFileStreamStore spfs, ILockBytes ilb, Boolean copyOnFirstWrite, Boolean disposeIlb) at Microsoft.SharePoint.SPFileStreamManager.SetInputLockBytes(SPFileInfo& fileInfo, SqlSession session, PrefetchResult prefetchResult) at Microsoft.SharePoint.CoordinatedStreamBuffer.SPCoordinatedStreamBufferFactory.CreateFromDocumentRowset(Guid databaseId, SqlSession session, SPFileStreamManager spfstm, Object[] metadataRow, SPRowset contentRowset, SPDocumentBindRequest& dbreq, SPDocumentBindResults& dbres) at Microsoft.SharePoint.SPSqlClient.GetDocumentContentRow(Int32 rowOrd, Object ospFileStmMgr, SPDocumentBindRequest& dbreq, SPDocumentBindResults& dbres... be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.50* SharePoint Foundation Files ak8dj High ...) at Microsoft.SharePoint.Library.SPRequestInternalClass.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object& pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, ... be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.50* SharePoint Foundation Files ak8dj High ...Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId) at Microsoft.SharePoint.Library.SPRequestInternalClass.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object& pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbst... be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.50* SharePoint Foundation Files ak8dj High ...rRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId) at Microsoft.SharePoint.Library.SPRequest.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion,... be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.50* SharePoint Foundation Files ak8dj High ... String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object& pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId) at Microsoft.SharePoint.SPWeb.GetWebPartPageContent(Uri pageUrl, Int32 pageVersion, PageView requestedView, HttpContext context, Boolean forRender, Boolean includeHidden, Boolean mainFileRequest, Boolean fetchDependencyInformation, Boolean& ghostedPage, String& siteRoot, Guid& siteId, Int64& bytes, ... be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.50* SharePoint Foundation Files ak8dj High ...Guid& docId, UInt32& docVersion, String& timeLastModified, Byte& level, Object& buildDependencySetData, UInt32& dependencyCount, Object& buildDependencies, SPWebPartCollectionInitialState& initialState, Object& oMultipleMeetingDoclibRootFolders, String& redirectUrl, Boolean& ObjectIsList, Guid& listId) at Microsoft.SharePoint.ApplicationRuntime.SPRequestModuleData.FetchWebPartPageInformationForInit(HttpContext context, SPWeb spweb, Boolean mainFileRequest, String path, Boolean impersonate, Boolean& isAppWeb, Boolean& fGhostedPage, Guid& docId, UInt32& docVersion, String& timeLastModified, SPFileLevel& spLevel, String& masterPageUrl, String& customMasterPageUrl, String& webUrl, String& siteUrl, Guid& siteId, Object& buildDependencySetData, SPWebPartCollectionInitialState& initialState, ... be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.50* SharePoint Foundation Files ak8dj High ...String& siteRoot, String& redirectUrl, Object& oMultipleMeetingDoclibRootFolders, Boolean& objectIsList, Guid& listId, Int64& bytes) at Microsoft.SharePoint.ApplicationRuntime.SPRequestModuleData.GetFileForRequest(HttpContext context, SPWeb web, Boolean exclusion, String virtualPath) at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.InitContextWeb(HttpContext context, SPWeb web) at Microsoft.SharePoint.WebControls.SPControl.SPWebEnsureSPControl(HttpContext context) at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.GetContextWeb(HttpContext context) at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.PostResolveRequestCacheHandler(Object oSender, EventArgs ea) at System.Web.HttpApplication.SyncEventExecutionStep.System.Web.HttpApplication.IEx... be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.50* SharePoint Foundation Files ak8dj High ...ecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) at System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception error) at System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext context, AsyncCallback cb) at System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompl... be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.50* SharePoint Foundation Files ak8dj High ...etion(IntPtr pHandler, RequestNotificationStatus& notificationStatus) at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr pHandler, RequestNotificationStatus& notificationStatus) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.50 SharePoint Foundation Files aiv4w Medium Spent 0 ms to bind 4224 byte file stream be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.50 SharePoint Foundation Logging Correlation Data xmnv Medium Site=/ be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.50 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (PostResolveRequestCacheHandler). Execution Time=11.7341 be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.52 SharePoint Portal Server User Profiles aj2aw Verbose GetPartitionPropertiesCache :: ApplicationId = c604ddac-b9f9-4661-b31f-44cdcf2b78dc be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.52 SharePoint Portal Server User Profiles aj2ax Verbose GetPartitionPropertiesCache :: Trying to find existing cache be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.52 SharePoint Portal Server User Profiles aj2az Verbose GetPartitionPropertiesCache :: Getting Cached object be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.54 SharePoint Portal Server User Profiles aj2aw Verbose GetPartitionPropertiesCache :: ApplicationId = c604ddac-b9f9-4661-b31f-44cdcf2b78dc be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.54 SharePoint Portal Server User Profiles aj2ax Verbose GetPartitionPropertiesCache :: Trying to find existing cache be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.54 SharePoint Portal Server User Profiles aj2ay Verbose GetPartitionPropertiesCache :: Found existing cache in httpcontext be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.54 SharePoint Server Database tzku Verbose ConnectionString: 'Data Source=HungerNet3;Initial Catalog=HNet3_Svc_Prod_UPA_Profile;Integrated Security=True;Enlist=False;Pooling=True;Min Pool Size=0;Max Pool Size=100;Connect Timeout=15;Application Name=SharePoint[w3wp][3][HNet3_Svc_Prod_UPA_Profile]' Partition: NULL ConnectionState: Closed ConnectionTimeout: 15 be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.54 SharePoint Server Database ahjqp Verbose SQL connection time: 0.0583 for Data Source=HungerNet3;Initial Catalog=HNet3_Svc_Prod_UPA_Profile;Integrated Security=True;Enlist=False;Pooling=True;Min Pool Size=0;Max Pool Size=100;Connect Timeout=15;Application Name=SharePoint[w3wp][3][HNet3_Svc_Prod_UPA_Profile] be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.54 SharePoint Foundation General adyrv High Cannot find site lookup info for request Uri http://www.hungernet.org/. be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.54 SharePoint Foundation General adyrv High Cannot find site lookup info for request Uri http://www.hungernet.org/. be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.54 SharePoint Foundation General adyrv High Cannot find site lookup info for request Uri http://lnkd.in/bb6rsHj. be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.55 SharePoint Server Database tzku Verbose ConnectionString: 'Data Source=HungerNet3;Initial Catalog=HNet3_Svc_Prod_UPA_Profile;Integrated Security=True;Enlist=False;Pooling=True;Min Pool Size=0;Max Pool Size=100;Connect Timeout=15;Application Name=SharePoint[w3wp][3][HNet3_Svc_Prod_UPA_Profile]' Partition: NULL ConnectionState: Closed ConnectionTimeout: 15 be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.55 SharePoint Server Database ahjqp Verbose SQL connection time: 0.0456 for Data Source=HungerNet3;Initial Catalog=HNet3_Svc_Prod_UPA_Profile;Integrated Security=True;Enlist=False;Pooling=True;Min Pool Size=0;Max Pool Size=100;Connect Timeout=15;Application Name=SharePoint[w3wp][3][HNet3_Svc_Prod_UPA_Profile] be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.55 SharePoint Portal Server User Profiles ajw8l High Exception in LoadRequestedUserProfile: (Microsoft.Office.Server.UserProfiles.UserNotFoundException: User Not Found: Could not load profile data from the database. at Microsoft.Office.Server.UserProfiles.UserProfile.Load(SqlDataReader myReader, Boolean bFirstRead, Boolean firstReaderIsViewerRights, Boolean includeColleagueRecords, Boolean includeLanguageAndRegionalSettings, Boolean shouldCloseReader) at Microsoft.Office.Server.UserProfiles.UserProfile.RetrieveUser(String strAcct, Guid gAcct, Byte[] bSid, Nullable`1 recordId, Boolean doNotResolveToMasterAccount, Boolean loadFullProfile, Boolean loadColleagueRecordIds, String strEmail) at Microsoft.Office.Server.UserProfiles.UserProfile..ctor(UserProfileManager objManager, String strAcct, Boolean doNotResolveToMasterAccount, Boole... be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.55* SharePoint Portal Server User Profiles ajw8l High ...an forceUserIsSelf, Boolean loadFullProfile, Boolean loadColleagueRecordIds, String strEmail) at Microsoft.Office.Server.UserProfiles.UserProfileManager.GetUserProfile(String strAccountName, Boolean doNotResolveToMasterAccount, Boolean loadFullProfile, Boolean loadColleagueRecordIds) at Microsoft.SharePoint.Portal.WebControls.ProfilePropertyLoader.LoadRequestedUserProfile(String& redirectionUrl)) be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.55 SharePoint Foundation General aat87 Monitorable be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.55 SharePoint Foundation General ajji6 High Unable to write SPDistributedCache call usage entry. be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.55 SharePoint Foundation Micro Trace uls4 Medium Micro Trace Tags: 0 nasq,20 ajji6,3 agb9s,10 ak8dj,1 b4ly,25 adyrv,1 adyrv,4 adyrv,3 ajw8l,1 aat87,3 ajji6 be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.55 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Request (GET:https://my.hungernet.org:443/Person.aspx?accountname=FA%255Ccbuchholz)). Execution Time=78.9958 be11a89c-ebeb-a08d-57d2-a513d117e184

Have Windows Updates been applied? See my note about this
https://twitter.com/imorrish/status/491020435039854592
Look at the URL in the search results. It may have invalid character in which case you can use this fix
http://blogs.msdn.com/b/spses/archive/2014/06/30/sharepoint-2013-the-search-results-with-5c-the-character-will-become-double-encoded-and-causes-broken-links.aspx
Regards,
Ian
http://sps.cloudapp.net
Regards, Ian Internet Sites running on SharePoint 2013 http://j.mp/sp2013sites

SQLJ Translation does not create profile file

SQLJ Translation does not create profile file.
After translating a small file HelloWorld.sqlj
the following files are created:
HelloWorld_SJProfileKeys.class
HelloWorld.class
HelloWorld.java
Although there is a HelloWorld_SJProfileKeys.class, profile file HelloWorld_SJProfile0.ser has NOT been created.
The starting file .sqlj file HelloWorld.sqlj is taken from O'Reilly book 'Java Programming with Oracle SQLJ' by Jason Price. The file contains a valid SQL statement to display the date.
My environment variables were set up with instructions from:
http://www.onjava.com/pub/a/onjava/2001/12/05/learning_sqlj.html
When I run java HelloWorld to run the .java file, I get the error:
SQLException java.sql.SQLException: profile HelloWorld_SJProfile0 not found: java.lang.ClassNotFoundException: HelloWorld_SJProfile0
I searched the internet high and low for a similar error to mine but I could not find a match.
I read the following text from http://otn.oracle.com/tech/java/sqlj_jdbc/htdocs/faq.html#translationerrors
but it does not help me.
"ClassNotFoundException: xxx.yyy_SJProfile0 for class xxx.yyy_SJProfileKeys
If you see an exception such as:
java.sql.SQLException: profile xxx.yyy_SJProfile0 not found:
java.lang.ClassNotFoundException:
xxx.yyy_SJProfile0 for class xxx.yy_SJProfileKeys
then you must ensure that the SQLJ profile(s), such as xxx/yyy_SJProfile0.ser, is available in the SQLJ runtime environment. This includes JARing this file as part of an applet deployment, or publishing it to the server via loadjava.
Any ideas? Thanks in advance,
John
Helloworld.sqlj before translation:
The program HelloWorld.sqlj illustrates how to connect to a
database, and display the words "Hello World" along with
the current date.
// import required packages
import java.sql.Date;
import java.sql.SQLException;
import oracle.sqlj.runtime.Oracle;
public class HelloWorld {
public static void main(String [] args) {
java.sql.Date current_date;
try {
// connect to the database
Oracle.connect(
"jdbc:oracle:thin:@localhost:1521:orac",
"scott",
"tiger"
// get the current date from the database
#sql { SELECT sysdate INTO :current_date FROM dual };
// display message
System.out.println("Hello World! The current date is " +
current_date);
} catch ( SQLException e ) {
System.err.println("SQLException " + e);
} finally {
try {
// disconnect from the database
Oracle.close();
} catch ( SQLException e ) {
System.err.println("SQLException " + e);
} // end of main()
HelloWorld.java after translation:
/*@lineinfo:filename=HelloWorld*//*@lineinfo:user-code*//*@lineinfo:1^1*//*
The program HelloWorld.sqlj illustrates how to connect to a
database, and display the words "Hello World" along with
the current date.
// import required packages
import java.sql.Date;
import java.sql.SQLException;
import oracle.sqlj.runtime.Oracle;
public class HelloWorld {
public static void main(String [] args) {
java.sql.Date current_date;
try {
// connect to the database
Oracle.connect(
"jdbc:oracle:thin:@localhost:1521:orcl",
"scott",
"tiger"
// get the current date from the database
/*@lineinfo:generated-code*//*@lineinfo:28^7*/
// #sql { SELECT sysdate FROM dual };
sqlj.runtime.profile.RTResultSet __sJT_rtRs;
sqlj.runtime.ConnectionContext __sJT_connCtx = sqlj.runtime.ref.DefaultContext.getDefaultContext();
if (__sJT_connCtx == null) sqlj.runtime.error.RuntimeRefErrors.raise_NULL_CONN_CTX();
sqlj.runtime.ExecutionContext __sJT_execCtx = __sJT_connCtx.getExecutionContext();
if (__sJT_execCtx == null) sqlj.runtime.error.RuntimeRefErrors.raise_NULL_EXEC_CTX();
synchronized (__sJT_execCtx) {
sqlj.runtime.profile.RTStatement __sJT_stmt = __sJT_execCtx.registerStatement(__sJT_connCtx, HelloWorld_SJProfileKeys.getKey(0), 0);
try
sqlj.runtime.profile.RTResultSet __sJT_result = __sJT_execCtx.executeQuery();
__sJT_rtRs = __sJT_result;
finally
__sJT_execCtx.releaseStatement();
try
sqlj.runtime.ref.ResultSetIterImpl.checkColumns(__sJT_rtRs, 1);
if (!__sJT_rtRs.next())
sqlj.runtime.error.RuntimeRefErrors.raise_NO_ROW_SELECT_INTO();
current_date = __sJT_rtRs.getDate(1);
if (__sJT_rtRs.next())
sqlj.runtime.error.RuntimeRefErrors.raise_MULTI_ROW_SELECT_INTO();
finally
__sJT_rtRs.close();
/*@lineinfo:user-code*//*@lineinfo:28^58*/
// display message
System.out.println("Hello World! The current date is " +
current_date);
} catch ( SQLException e ) {
System.err.println("SQLException " + e);
} finally {
try {
// disconnect from the database
Oracle.close();
} catch ( SQLException e ) {
System.err.println("SQLException " + e);
} // end of main()
}/*@lineinfo:generated-code*/class HelloWorld_SJProfileKeys
private static HelloWorld_SJProfileKeys inst = null;
public static java.lang.Object getKey(int keyNum)
throws java.sql.SQLException
if (inst == null)
inst = new HelloWorld_SJProfileKeys();
return inst.keys[keyNum];
private final sqlj.runtime.profile.Loader loader = sqlj.runtime.RuntimeContext.getRuntime().getLoaderForClass(getClass());
private java.lang.Object[] keys;
private HelloWorld_SJProfileKeys()
throws java.sql.SQLException
keys = new java.lang.Object[1];
keys[0] = sqlj.runtime.ref.DefaultContext.getProfileKey(loader, "HelloWorld_SJProfile0");
}

SQLJ Translation does not create profile file.
After translating a small file HelloWorld.sqlj
the following files are created:
HelloWorld_SJProfileKeys.class
HelloWorld.class
HelloWorld.java
Although there is a HelloWorld_SJProfileKeys.class, profile file HelloWorld_SJProfile0.ser has NOT been created.
The starting file .sqlj file HelloWorld.sqlj is taken from O'Reilly book 'Java Programming with Oracle SQLJ' by Jason Price. The file contains a valid SQL statement to display the date.
My environment variables were set up with instructions from:
http://www.onjava.com/pub/a/onjava/2001/12/05/learning_sqlj.html
When I run java HelloWorld to run the .java file, I get the error:
SQLException java.sql.SQLException: profile HelloWorld_SJProfile0 not found: java.lang.ClassNotFoundException: HelloWorld_SJProfile0
I searched the internet high and low for a similar error to mine but I could not find a match.
I read the following text from http://otn.oracle.com/tech/java/sqlj_jdbc/htdocs/faq.html#translationerrors
but it does not help me.
"ClassNotFoundException: xxx.yyy_SJProfile0 for class xxx.yyy_SJProfileKeys
If you see an exception such as:
java.sql.SQLException: profile xxx.yyy_SJProfile0 not found:
java.lang.ClassNotFoundException:
xxx.yyy_SJProfile0 for class xxx.yy_SJProfileKeys
then you must ensure that the SQLJ profile(s), such as xxx/yyy_SJProfile0.ser, is available in the SQLJ runtime environment. This includes JARing this file as part of an applet deployment, or publishing it to the server via loadjava.
Any ideas? Thanks in advance,
John
Helloworld.sqlj before translation:
The program HelloWorld.sqlj illustrates how to connect to a
database, and display the words "Hello World" along with
the current date.
// import required packages
import java.sql.Date;
import java.sql.SQLException;
import oracle.sqlj.runtime.Oracle;
public class HelloWorld {
public static void main(String [] args) {
java.sql.Date current_date;
try {
// connect to the database
Oracle.connect(
"jdbc:oracle:thin:@localhost:1521:orac",
"scott",
"tiger"
// get the current date from the database
#sql { SELECT sysdate INTO :current_date FROM dual };
// display message
System.out.println("Hello World! The current date is " +
current_date);
} catch ( SQLException e ) {
System.err.println("SQLException " + e);
} finally {
try {
// disconnect from the database
Oracle.close();
} catch ( SQLException e ) {
System.err.println("SQLException " + e);
} // end of main()
HelloWorld.java after translation:
/*@lineinfo:filename=HelloWorld*//*@lineinfo:user-code*//*@lineinfo:1^1*//*
The program HelloWorld.sqlj illustrates how to connect to a
database, and display the words "Hello World" along with
the current date.
// import required packages
import java.sql.Date;
import java.sql.SQLException;
import oracle.sqlj.runtime.Oracle;
public class HelloWorld {
public static void main(String [] args) {
java.sql.Date current_date;
try {
// connect to the database
Oracle.connect(
"jdbc:oracle:thin:@localhost:1521:orcl",
"scott",
"tiger"
// get the current date from the database
/*@lineinfo:generated-code*//*@lineinfo:28^7*/
// #sql { SELECT sysdate FROM dual };
sqlj.runtime.profile.RTResultSet __sJT_rtRs;
sqlj.runtime.ConnectionContext __sJT_connCtx = sqlj.runtime.ref.DefaultContext.getDefaultContext();
if (__sJT_connCtx == null) sqlj.runtime.error.RuntimeRefErrors.raise_NULL_CONN_CTX();
sqlj.runtime.ExecutionContext __sJT_execCtx = __sJT_connCtx.getExecutionContext();
if (__sJT_execCtx == null) sqlj.runtime.error.RuntimeRefErrors.raise_NULL_EXEC_CTX();
synchronized (__sJT_execCtx) {
sqlj.runtime.profile.RTStatement __sJT_stmt = __sJT_execCtx.registerStatement(__sJT_connCtx, HelloWorld_SJProfileKeys.getKey(0), 0);
try
sqlj.runtime.profile.RTResultSet __sJT_result = __sJT_execCtx.executeQuery();
__sJT_rtRs = __sJT_result;
finally
__sJT_execCtx.releaseStatement();
try
sqlj.runtime.ref.ResultSetIterImpl.checkColumns(__sJT_rtRs, 1);
if (!__sJT_rtRs.next())
sqlj.runtime.error.RuntimeRefErrors.raise_NO_ROW_SELECT_INTO();
current_date = __sJT_rtRs.getDate(1);
if (__sJT_rtRs.next())
sqlj.runtime.error.RuntimeRefErrors.raise_MULTI_ROW_SELECT_INTO();
finally
__sJT_rtRs.close();
/*@lineinfo:user-code*//*@lineinfo:28^58*/
// display message
System.out.println("Hello World! The current date is " +
current_date);
} catch ( SQLException e ) {
System.err.println("SQLException " + e);
} finally {
try {
// disconnect from the database
Oracle.close();
} catch ( SQLException e ) {
System.err.println("SQLException " + e);
} // end of main()
}/*@lineinfo:generated-code*/class HelloWorld_SJProfileKeys
private static HelloWorld_SJProfileKeys inst = null;
public static java.lang.Object getKey(int keyNum)
throws java.sql.SQLException
if (inst == null)
inst = new HelloWorld_SJProfileKeys();
return inst.keys[keyNum];
private final sqlj.runtime.profile.Loader loader = sqlj.runtime.RuntimeContext.getRuntime().getLoaderForClass(getClass());
private java.lang.Object[] keys;
private HelloWorld_SJProfileKeys()
throws java.sql.SQLException
keys = new java.lang.Object[1];
keys[0] = sqlj.runtime.ref.DefaultContext.getProfileKey(loader, "HelloWorld_SJProfile0");
}

Firefox will not start at all ... not even profile mananger will start

After an auto overnight reboot initiated by a Windows update (XP 5.1 SP3) Firefox will not start at all ... not even Profile Manager ... all that happens is a few seconds of hourglass on the cursor and then nothing ... this is happening on two different computers at the same time ... identical symptoms ... any advice?
== After overnight reboot by auto Windows update

I had the problem after I restarted the computer when Firefox indicated that was needed to install updates. After that every attempt to start Firefox resulted in no response at all. I went to my program list and found Firefox Safe Mode. That started OK. I then closed it. After that Firefox started OK.
Bob G.

WD MyBook Premium 320GB Firewire not recognized on my MBP?

Hey guys,
First off, thank you for the help anyone is willing to offer.
Ok, so i have a MBP Intel Core Duo (1gb RAM) and use it to record music on. But basically, i have a WD MyBook Premium 320GB drive that works perfectly fine via USB. It powers up, mounts, and i can back anything i want on it. I formatted the drive to Mac Extended Journal format.
I would like to use the firewire port though, just to keep my USB ports open. When i plug it via Firewire i get nada. I plug it in and power up the MBP and the drive doesnt power up, so i turn it on and it doesnt mount. Now, THis is the second one i have, i had the same one a few weeks ago and returned it for this one thinking the drive was defective but its obviously not. is there anyway to "turn on" or Fix this issue with the firewire not recognizing the drive?
thanks alot for the help
Macbook Pro 15" Intel Core Cuo Mac OS X (10.4.9)

Ace King, in case you're still dealing with this I figured it out:
I called tech support for an hour. First lady I talked to told me the firewire cable that was supplied with the drive is defective (she knew the problem right away). Tried my own cable but it still didn't work. She put me on to "Level 2"....ooooooh....now I'm getting somewhere? No, wait for 15 more minutes listening to terrible muzak...
Anyways while I was waiting I thought I'd try my good cable in the other port on the drive and oila! So when the dude gets on the phone I ask him what the deal is...get this:
"The faulty cable most likely fried the port." Wow...not only is the cable crap it actually destroys their product...someone must have lost their job for that one. Seems like sabotage almost...anyways, there you go. Return it and DO NOT use the cable supplied.
Cheers!

No laughing... I have a Canon ZR 300 camcorder. I can not see it when connected via firewire in system profile and iMovie doesn't see it either. Any suggestions?

I have an old Canon ZR 300 camcorder that I'm trying to connect to my 17" MBP via 9 pin firewire (its a 4 pin to 9 pin cable as the MBP doesn't have a 4 pin firewire - figured it was backwards compatible). Anyhow, iMovie 09 doesn't see the camcorder. I checked under System Profile and then under Firewire and it doesn't see it either. In fact I get some red letters about not seeing firewire devices. I'm running Lion. Any help would be greatly appreciated!!
Greg

Should using mixed wifi and ethernet clients on a timecapsule work? if so is it a feature I can use out of the box so to speak?
Thanks
No a TC cannot do what you want.. it is now in dumb stupid wireless join mode.. and it turns off the ethernet ports.. in case you want to use the TC as a wireless bridge to multiple clients which is plainly wrong.. (only airport express is allowed to do this since it has only one ethernet port).
Welcome to Apple. (The plainly wrong above is a figment of Apple imagination.. of strict network protocols.. but unhelpful for a home device. maybe also to encourage sales of expresses.)

Isight not listed under firewire in system profile

hello all,
All of a sudden my isight is not listed under firewire in the system profile. I've tried restarting with it plugged in and with it not plugged in. The green light of the camera will come on for a few seconds then shuts off when i do plug it into a firewire port. I have tried both ports on the computer and it is the same thing with each. I use yahoo messenger and no camera is listed there anymore. I also have iglasses installed and it always worked great. I guess I need to know how to get the system to list it again!
Thanks in advance for any help!
Tim

Welcome to Apple Discussions, Tim
Sorry Tony's good suggestion did not work for you.
(1) You can try the other checks, including checks for things like bad cables or ports, from How to test your iSight to ensure it is functional. If you can, it will be particularly helpful to try your iSight on another Mac and try another iSight on your Mac.
(2) Click the highlighted items in System Profiler as follows to check for iSight:
If your iSight is still not recognized in System Profiler, try the suggestions in Apple's What to do if your computer won't recognize a FireWire device article.
(3) If you can get your external iSight recognized as a Firewire device in System Profiler but your iSight is still not working, you should next try all relevant suggestions from Apple's How to Troubleshoot iSight.
Be sure to include the checks for whether the problem is "application-specific" and "user-specific". Click here if you need help creating a new user account to check whether your problem is "user-specific" during Troubleshooting.
(4) If you cannot get System Profiler to recognize iSight as a Firewire device after trying all relevant suggestions, contact Apple or an Apple-Authorized Service Provider for service.
EZ Jim
Mac OS X (10.4.10) G5 DP 1.8 External iSight

External Firewire not mounting

Since the quicktime 7.5 updater I have been unable to mount ANY firewire devices. A check of the system profiler shows under firewire,(in red) "Unable to list FireWire devices."
The same external drive when using USB 2.0 connection does indeed mount and work properly suggesting there is now a problem with both FireWire and FW800 connections. Ive tried everything listed in every forum and the issue persists. Since finding this "Warning" in the system profiler Ive decided to post with the hopes others may recognize the same issue and perhaps we can find a solution.
Onward and thanks.

Hi Dennis,
I read your thread with interest because I just installed Leopard X.5.3 on a partition on my iMac G5, and the FW 400 devices that had been working fine were not mounting. I, too, have a Belkin FW "powered" Hub, and I was beginning to think it was bad. I had even gotten the same error in red in System Profiler/Firewire/Firewire device Tree/"Unable to list Firewire Devices".
So as I wrote this note, I'd say 5 minutes after the problem started, the drive (actually a mirrored array of 2 drives) appeared. I have since tried to mount the other drives I have connected to the Belkin Hub, and they wouldn't show. I connected the hub to my other iMac and unforunately 2 of 3 Mirrored Arrays are showing as degraded. Only the 1 "good" array appeared on the Leopard install on the iMac G5.
So I guess I've got to remember to unplug devices when doing a system install? That's must be how these guys got hosed?
YMMV.
So long for now, TOM

Shut down without warning @ 30% , firewire not working , sleep mode problem

Hello!
I seem to have a combination of problems in which I believe that somehow they must be related altogether. I would appreciate any advice you may have on the cause of these problems and/or any solutions. Here's a detailed list of the problems:
1. The computer shuts down without warning at about 30% battery.
2. The Firewire doesn't seem to work when I try to connect my external HD.
3. The firewire Bus data is not shown on the System Profiler.
4. The sleep mode doesn't work; if I press the "sleep" icon, it doesn't respond to it.
5. When I close the lid and open it again, the screen remains turned off which requires me to force shut down the computer every time. Yet, it seems that its only the screen that does not want to come back up, the unit seems operational.
6. The sleep light indicator does not pulse when lid is closed, it stays on.
Actions taken:I have tried resetting the Power Management Unit (PMU) to no avail. Have the battery update. Have reset the PRAM.
Thanks in advance for any help!

Temp: (on start-up in regualr mode, about 2 minutes from boot up)
AMBIE: 25ºC
CPU A Heatsink: 31ºC
CPU A Proximity: 35ºC
CPU A Temperature Diode: 32ºC
Display Screen Proximity: 29ºC
Graphics Processor Heatsink 1: 34ºC
Graphics Processor Temperature Diode: 44ºC
Hard Drive Bay 1: 31ºC
Main Logic Board: 32ºC
Northbridge Chip: 55ºC
Northbridge Heat Sink: 50ºC
Northbridge Position 1: 39ºC
Optical Drive: 26ºC
Power Supply Position 1: 42ºC
SMAR Disk WDC: 33ºC
CPU Core 1: 33ºC
CPU Core 2: 32ºC
less then 5 minutes in the computer shut itself off...
went to safe mode, temp was as follows:
20 minutes running safe mode:
28ºC
50ºC
55ºC
56ºC
50ºC
54ºC - Graphics Processor Heatsink 1
64ºC - Graphics Processor Temperature Diode
47ºC
52ºC
86ºC
81ºC
62ºC
41ºC
74ºC - Power Supply Position 1
49ºC
few hours running in safe mode:
26ºC
49ºC
56ºC
56ºC
52ºC
54ºC - Graphics Processor Heatsink 1
64ºC - Graphics Processor Temperature Diode
50ºC
54ºC
89ºC
84ºC
64ºC
45ºC
80ºC - Power Supply Position 1
53ºC

Mac Pro FireWire not working at all

Hey guys,
I'm pretty desperate right now. My brand new Mac Pro (two days old) has suddenly stopped noticing firewire devices. I tried to troubleshoot everything and nothing was working so I just finished erasing and reinstalling OS X on the main hard drive. That didn't help. If I go into the System Profiler, and click on firewire, it takes a few seconds, and shows absolutely nothing, even though about 4 devices are plugged in (FW400, FW800) Even though they are on, even disk utility does not show them. They are basically invisible and unaccessable. Please, anyone who knows what I can do, let me know. I reset the SMC, I reset the PRAM, I've tried all I could think of, and now I am on a ten minute old install of OS X. Thanks in advance!

Have you tried running the hardware test? Put in your main system DVD, restart and hold down "D" until you get the icon. Let it run some tests to see if anything comes up bad.
It's rare, but it's not impossible you have a bum controller in there. I hope you get it running. That thing is FAST!
Good luck.
-Alex

FireWire not recognizing device

I am running 10.5.8 on MacBook Pro. I was successfully using my camcorder and DV cable and everything worked fine. Suddenly my camcorder was no longer recognized (I am not sure if this correlated with a change in firmware or not.) When I go to "Network" the status shows the FireWire is not connected. The camcorder flashes DV-IN, so it seems like the problem is on the computer side. Please Help!!!! Thank you in advance.

Hi,
Do you have any other firewire devices that you can connect to your computer. Try connecting the device with the same cable and see if it is recognised in system profiler, if it does it is the fault is probably on the camera.
Also before you try that, connect your camera, switch it on in VCR mode and then launch i movie.
Good Luck.
DM

FireWire Not Working

I Have A 15 Inch PowerBook G4 (Gigabit Ethernet) With A 550MHz PPC Processor, 256 Megabytes Of RAM, And My FireWire Port Is Not Working. Tried TechTool Delux - But No Tests For FireWire. Any Ideas? Thank You!

Does it show as a device in the Apple System Profiler?
What is the device? It would be helpful, especially with some one as experienced as yourself, to identify the device, ie. firewire camcorder, bus powered hard drive, powered hard drive, scanner???
If a video camcorder, does it appear as a device in iMovie or FCP?
If a hard drive, does it appear under the Disk Utility as unmounted?
Someone that can fix everything must have certainly examined each of these issues.
Let us know

Isight not in profiler

I need a solution for my isight. Sometimes it disappears from my system profiler. I unplug it from my firewire port, but because of having Cerebral Palsy I am never able to plug it back in myself, so I usually have to wait until I find somebody to help me plug it in, then it works. Also, I realize I could turn it on and off using the lense, however I can't do that either. Would it be worthwhile to try a different firewire cable? By the way, we tried switching ports even.

Must have been a fluke problem, has not happened since.

Firewire not on profiler

Similar Messages

Maybe you are looking for