Firmware bug found in RV042 Version: 1.3.9

I have several customers using the RV042 to connect several branch offices to a central location. Recently I tried connecting an RV042 to a different brand IPsec router (Calyptix AE1000) and got it to connect, however it would only stay up about 30 seconds, then fail. We eventually discovered after weeks of troubleshooting, that the RV042 was truncating the Incoming SPI (in Manual Keying Mode) to seven digits instead of taking the full 8 bit bey. Calyptix was able to succesffully convince their device to accept a seven-digit key and now it works perfectly.
When there's a firware released for this product I'd like to see this problem resolved so I don't have to call Calyptix every time I try to integrate one of their boxes and an RV042/RV082.

Thanks, I filed this as bug 5957845
Keimpe Bronkhorst
JDev IDE team

Similar Messages

Firmware bug: $CCERT must not be used in Report_Rule

Prolog
"Report Rule" can be configured with URL's used to save phone's current configuration. Starting with 7.5.2b firmware it is possible to configure more than one URL here. The semi-colon has been used as separator. It caused issues because semi-colon can be used in casual URL, so the separator has been changed to space in 7.5.5 (see Bug in Report_Rule parsing (SPA50x, fw 7.5.x) for more)
As of 7.5.7 firmware, the 2048 certificates has been introduced and value of $CCERT variable may contain text "Installed (2048 bits)". It cause other issue related to Report Rule parsing.
Issue & how to repeat
$CCERT can be used on "Report Rule" no longer because of wrong parsing order.
The author of firmware first call variable expansion for complete "Report Rule" string, then split the result by space in attempt to found second URL.
With Report Rule configured to https://test.local/Report.php?Product=$PN&CERT=$CCERT it is parsed to:
first_rule is https://test.local/Cisco/Report.php?Product=SPA508G&CERT=Installed, second_rule is (2048 bits)
It is wrong result. In advance, it reveal the characters inserted into URL by variable expansion are not escaped properly.
How to fix
The order of parsing steps needs to be reversed. Report Rule need to be split into parts first, then variable expansion should be called for both parts independently. Also, strings expanded from variables should be url-encoded properly.
Disclaimer
I will not call SMB support to report this bug to them. Assuming the Cisco is interested to repair firmware bugs a staff member monitoring this forum will create ticked by self. I wish that all relevant information including the depth-in analysis has been disclosed here. I'm ready to provide further details or create test environment if necessary. I'm just not willing to call the Support center as I'm not willing to explain all those complex things described here by phone (and they doesn't accept written reports).
For those non-Cisco-staff users affected by issue - feel free to report the issue to Support center, if you are willing to do it. You are allowed to use information disclosed here, or just refer to this report. I don't care the authorship.

Post Author: CompositeID
CA Forum: .NET
You are not alone on this one, I am having the very same issue as you are and . Everything functioned just fine the last time the application was deployed was deployed and there was nothing changed to any of the reports or code which handles the reports; however, this time I am having the same issue. I added the parameters to the report to check to see if they were actually being recognized by the report and they do show up, but it refuses to filter the records and brings back every record. The report works properly if I run it just directly in Crystal though. I sure hope someone can enlighten us Paul.
Update: Well, I finally figured out what was causing my issue. The issue had to deal with the actual older version of the CrystalReportViewer control and the newer version supplied by the update. I had suspected it was something minor that I had overlooked when doing the update. Hope this gets you going as well. Cheers

Bug Found and Fix Found Creative ZEN XFI Style 32 Gig

9Bug Found and Fix Found> Creative ZEN XFI Style 32 Gig?Hello I was having problems getting my MP3 TAGS to show up on a number of my MP3's.
Whenever I loaded my files onto my ZEN it would show up as a Voice under Recordings.
And the file name would be "MIC and the date file created etc..."
I noticed that these files where all starting with the letters MIC at the front of the filename...
For instance: Michael_Jackson_Thriller.mp3?? or? Michael_W_Smith_Let_it_rain.mp3
and so on and so on... ANY file that started with the letters M I C? would be thrown in as a voice recorded file and the TAG would not operate.
I have the latest Firmware on my MP3 Player.
The fix was just to change the file name so it did not start with MIC... so i went and switched Michael Jackson to M.Jackson and also switched Michael W Smith to M W smith.
The tag showed up appropriately and I have had no problems since.
It would be nice if there was another Firmware update so that MP3's could start with the letters MIC also I was hoping to bring awareness to this situation for other users.

=Re: Bug Found and Fix Found> Creative ZEN XFI Style 32 Gig?I did three methods of?loading the files.
I used Windows Media Player to sync the files.
I used Creative Central to transfer the files.
These two methods produced results where the file starting with MIC turned into a voice recordings.
I also had problems just copying and pasting the files (using windows explorer).
I have not had any problems with any other file. I normally use MP3Tag to tag my files.
However i even tried using Windows Media to tag the file and I even tried using Creative Central to tag the files.
I tried as many work arounds as possible. But once i renamed the file it worked.

E55 Thread for Firmware Bugs

I noticed that there isn't yet a thread in order to report E55 firmware bugs, so I started this
Here the firmware bugs I've found:
- Hidden WLAN: when you search for wireless access points (for example from the main screen) the phone see always one "hidden wlan", that is not there!
- Default phone numbers: when you have more phone numbers for a contact, you can choose one of these as default for messaging or dialing, but even if you do that, E55 keep asking you what number to use every time you make a sms
- Organizer major bug: sometimes (80% of times!) when you edit a memo in Organizer, or when you move it (by changing the start date), you will see that also the end date has changed (adding 1 or more days), even if you didn't touch it! And even if the start and the end date originally matched! So if you had a memo covering one day, now it covers more days, and the end date can't be changed again (you set the correct date, save, and none happens). This make the memos totally unusable!
- Organizer minor bug: when you open Organizer, and then open a memo, you have to select the information that you want to modify (text, date, synch) and click one more time to edit the memo. But: if you select the "date" or the "synch" row, instead of the "text" row, and then click "modify", the memo is open alway with the cursor on the "text" row. So, the capability of selecting others rows, is pretty useless.
I hope some Nokia guy will notice this thread so there informations can be useful for a future firmware release, also because I'm getting crazy with the memos issue!!
Roberto
Moderator note: word 'official' removed from title, as this may mislead users to believe that the information presented comes from or is in some way endorsed by Nokia.
Message Edited by michaels on 05-Oct-2009 10:06 AM
Message Edited by michaels on 05-Oct-2009 03:31 PM
Roberto Dapino
http://www.stormvision.it/blog

hi olandesevolante
about ur first and second issues u face they r not realy bugs, why?
for the first one: i faced that with my E51 in a place i visited before, that hidden WLAN maybe a conflict from another type of waves other than that of wlan using same frequency
and about the second issue: default phone numbers is a feature that only set for making calls but when u make an sms the phone will ask u to choose between numbers present unders the same contact name even if u set a default number, so it is not a bug but that is the normal firmware properties
for the rest of issues , they sound like real bugs
i hope i helped a little and i wish those bugs will be removed in the next firmware
Message Edited by michaels on 05-Oct-2009 03:31 PM
Phones I bought from 1st till now:
3210 / 3310 / 3410 / 6310 / 6600 / 6020 / N72 / E51 / X2-00 / 5310 xpress Music / E90 Communicator
If you like my post or it helped you, Give me Kodo

Firmware bug: CPU1 tried to use APIC500

Every time I want to use the computer (HP Compaq 6005 Pro small form factor) I have to switch it on and then push the reset button after booting up to a black screen.
I once got :
Firmware bug: CPU1 tried to use APIC500 (LVT offset0) for vector 0x400 but the register is already in use for vector 0xf9 on another CPU.
Any ideas?
Is Linux reporting a real firmware fault or is it wrong?

Hello anonio-mouse,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand you are getting the [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu. I have looked on the Ubuntu site and under the Bugs section I found the bug [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is alrea... so it looks to be a geniune error and is being addressed on the Ubuntu site.
I hope I have answered your question to your satisfaction. Thank you for posting on the HP Forums. Enjoy your weekend!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Firmware bug? No Connect/Disconnect button on "Manual" PPPoE option

Hi,
To the best of my knowledge this is a firmware bug.
There is no Connect/Disconnect option when choosing "Manual" from the PPPoE settings.
There are two related (unanswered) posts:
http://discussions.apple.com/thread.jspa?messageID=8166971&#8166971
http://discussions.apple.com/thread.jspa?messageID=8137893&#8137893
Is there an official way to report such a bug?
Does anybody have another solution?
Thanks,
Omri

I reported the bug and got this response:
This is a follow up to Bug ID# 6286922. After further investigation it has been determined that this is a known issue, which is currently being investigated by engineering. This issue has been filed in our bug database under the original Bug ID# 5847755. The original bug number being used to track this duplicate issue can be found in the State column, in this format: Duplicate/OrigBug#.

Firmware bugs

Hello!
I found three firmware bugs and already informed the hotline about one of them in january. It is not fixed in firmware 1.1, so I am posting here.
The first, already reported, bug can be seen with German language setting when configuring the alarm clock. The dialog where you can enter the desired alarm time shows am/pm time although the other time options change to 24h display when setting the iPod to German.
The second bug is inside the game Solitair. Very often you can't move a card to the "finished" stack, although it matches perfectly. For example you can move a red four on top of a black five, but not on top of the (matching) red three at the top.
The third bug is inside the game Brick. I noticed sometimes the ball does not get faster over time which makes it very easy to go through all levels. In fact after some time the first level re-appears.
The following facts are annoying, but I don't know if I can call them bugs.
a) My computer very often loses the connection to the iPod while transferring (large) files. I am using opensource software (Linux, gtkpod), so it might be something to preven t users from using non-supported hardware.
The first message indicating the problem is
"Nov 26 13:38:13 carsten-otto usb 1-3: reset high speed USB device using ehci_hcd and address 71" just after the transfer stopped. This message repeats some times and then everything gets messy.
b) Videos stop playing with sound after some time. I did not try with official videos yet, but my self built videos do meet the requirements and should play. After about ten seconds the video stops for about 5 seconds and then starts again, but from now on without sound. Whenever I seek to a new position I can have sound again, but only for another ten seconds.
Please tell me how to solve the problems and/or how to contact Apple so that they can help me.
Thank you,
Carsten Otto

The Video issue I am having, and I believe all people are having with 5th Generation Video IPODS. I've installed probably 8 or 9 programs over the last two days, hoping to find one that doesn't screw up the video/sound after a few minutes.
It's interesting because none of the Video Podcasts seem to have a problem running on it, but some information regarding how this is working for Video Podcasts but nothing else is missing. I would hope a firmware upgrade is in the works to fix this problem, because if not I anticipate a large recall, and I think this would be bad publicity for Apple, at a time when many competitors are biting at the bit to take a share out of the market.

X6 Firmware Bugs and Suggestions after V30

I downloaded and installed V30 on my X6 8GB yesterday.
The changelog on Nokia's website is:
- Here and Now
- New version of Ovi Maps and Ovi Store
- Improved Browser
- Improved chat in Ovi Contacts
Despite it saying that Ovi Maps and Ovi Store have been updated, I still had to install their last version via Ovi Suite (Maps 3.4, not 3.6 Beta).
Same thing for Ovi Store, Ovi Music and Ovi Contacts. Only Here and Now has actually been updated. It's very strange, because a 3rd party app like Quickoffice has been updated, but not Nokia's own software.
Beside that, I found this update not so impressive: maybe the overall peformance was improved a bit, but since no other things have been updated, it cannot be considered a major update.
I'm not here to blame someone or to complain, but I feel like Nokia developers released this update just to provide something, and that it will be completed in some V31 version (with all the respect for their work, it's just an impression). If it's the case, I hope it will come in near future.
Now the bugs.
- I cannot say if the date bug has been corrected since I installed it only yesterday, but if it's still there, it's something to work on for next release
- WLAN keep connecting itself after using Ovi Store, even if I go to WLAN settings and disconnect it manually, if I stay for some seconds it connect again (I didn't try with browser so I don't know if it does the same)
- All the bugs listed here
And the suggestions...
- Obviously, improved performance in CPU, RAM management, Wi-Fi, touch experience and all the things stated here are required to support all new features
- A real update to the Nokia apps on the device, like Maps and Store, which now have to be installed via Ovi Suite also after the update
- The suggestions reported in the link above
Thanks for reading and hope this will be taken into consideration!

Someone confirmed that the apps are not really updated as they should.
Ovi Suite found a new version also for him, and installed them even if the phone said that they were up-to-date.
Here and Now was detected, but when updating it stopped, maybe because it is really updated.
Anyway, there is a problem: if they are updated, Ovi Suite should not detect an update and, most important, should not rewrite them on the phone with their last version.
Ovi Store is not updated: when I opened it from the phone, it make me download and install the new version.
So they are not really updated or, in the Maps/Music/Contacts case, there is something wrong that make Ovi Suite install another new version.
Also the date incorrect bug is not solved, as confirmed by many others, though I haven't seen it yet.
For other bugs and suggestions, read the topics I linked in the first post.

N80 4.0632.0.38 firmware bugs.

Just recently updated my nokia n80 to firmware version 4.0632.0.38 (latest version) (optus - melbourne) and now im having problems with my phone.
One of the following 2 things happen but not at the same time.
Cannot make outgoing calls at all to any type of number.
Can make outgoing calls but cannot put the call on loudspeaker.
I have to turn the phone off take the battery out then turn it back on again and then it lasts about 5min then stuffs up again.
Spoke to nokia support and they said i have to take it to a nokia service centre to get it looked at, which im going to do but as he told me they can't roll firmware back to a previous version i dont know how they're going to fix it.
I've tried everything from setting phone to factory defaults, reinstalling firmware and removing memory card in case there is a conflicting file/app on it.
The operator on the phone said there is a possibility it is a hardware failure but i dont think so as it was working fine previously.
I'm sure it's software related because it has never done this until i updated the firmware.
Just annoying how i upgrade to the latest version to fix bugs and now ive got one of the biggest disadvantages of not being able to make calls at all.
Just wondering if anyone has had the same problem??
Just hope that if this turns out to be a software problem that it can be fixed asap and a new firmware update can be released.

i still believe the software on mine has got to be the problem because nokia have replaced my phone with another N80 and it still does the same thing!!!
i'm trying to tell them to look into it with software developers etc.. but im getting nowhere.
This is a joke.

[svn] 4223: Some fixes for bugs found running the TC acceptance tests:

Revision: 4223
Author: [email protected]
Date: 2008-12-03 11:35:03 -0800 (Wed, 03 Dec 2008)
Log Message:
Some fixes for bugs found running the TC acceptance tests:
- Empty try {} throwing NPE while emitting code.
- OP_Callproperty and OP_Callproplex may have a known type but default value.
- Better diagnostic message for CONSTANT_TypeName and preliminary plumbing for CONSTANT_TypeName support.
Modified Paths:
flex/sdk/trunk/modules/asc/src/java/adobe/abc/GlobalOptimizer.java

Re: SB Audigy Series Support Pack 2.5 (08/09/2009)? Important Installation Notes
If any drivers are already installed, you must follow these steps to ensure a proper installation of the new Support Pack.
) Open a Command Prompt window with Admin privileges (right click and select Run as Administrator).
Type the following commands:
takeown /f C:\Windows\*.cdf
cacls C:\Windows\*.cdf /G [color="#ff0000"]Administrators:F
Where [color="#ff0000"]Administrators may?be different if you are running a localized version of Windows or?you can simply use your login name.
2) Unpack the previous Support Pack or Creative official release.
3) Run \Drivers\Setup.exe and choose Driver Uninstallation, select Delete all shared Creative audio driver files. and click OK. Reboot when asked to do so.
4) Make sure the following files were deleted, otherwise delete them manually:
- For Windows 7 / Vista 32-bit open?C:\Windows\System32 and delete UDAAPO32.DLL and?UDAPLD32.DLL.
- For Windows 7 / Vista 64-bit?open?[color="#ff0000"]C:\Windows\System32 and delete[color="#ff0000"] UDAAPO64.DLL and?[color="#ff0000"]UDAPLD64.DLL then? open?C:\Windows\SysWOW64 and delete UDAAPO32.DLL.

My JPEGS are no longer being copied over to Finder. Only a random fraction are copied. It use to work perfect. Is there a bug in the updated versions of iPhoto?

My JPEGS are no longer being copied over to Finder. Only a random fraction are copied. It use to work perfect. I can move them 4 or 5 at a time, but it is very time consuming. Is there a bug in the updated versions of iPhoto?

OK - here is what I've done in the past. As I want to be able to save my photos on a DVD that can be read by both a PC and a Mac, I am burning them in Finder. I start by downloading into IPhoto. I'll flag and edit the ones I want to print or post to the web. After that I want to take all the keepers and move them from IPhoto to various files I create in the document section of Finder. I've done it both ways in the past, copy and paste or just drag over, all the files would transfer over. Now there may be dozens of pictures that do not move over - very random, in one case there were only 6 photos and the 3 vertical ones did not copy over.
I'm wondering if this is a software issue or if there is just too much data being moved around. FYI there are 2 Nikon cameras I use and the files from both do this.
Thanks

Has Anyone Found the New Version of the iPod Radio Remote?

Hi,
Per iLounge, Apple released an updated ipod radio remote that has the most current version of Apple's ipod headphones as opposed to the shortened ones. I've checked on-line, Best Buy, Circuit City Compu World, Micro Center with no luck. I aslo tried the bricks-and-mortar Apple store...they looked at me like I had ten heads. Apparently they have the same sku as the old set.
I posted a question to Apple Support, but no response yet. Has anyone found the new version anywhere?
Thanks

Thanks. I've submitted requests to Apple to find out if or when they will be shipping the new remote, but they have not responded within their promoted 24-hour timeframe. I'll try to order from Apple directly and hope I get the new headphones too!
Thanks

Is there ANY way to report firmware bugs to nokia ...

Nokia released firmware 51.018 for E52 6 months ago.This broke N-Gage and games which were paid for can not be activted.The problem is not corrected in later updates.
Firmware v52,v53,v54.Nokia Care centers tell me its Network problem.I have tested 5 E52s and it is a firmware problem.Mailing to ASK nokia does not reult in bug getting known to programmers either.They lecture me about correct settings.
Some body please tell me if there ANY way to report firmware bugs to nokia programmers
Solved!
Go to Solution.

do you think there will be a new firmware update for e52?
E52 - Product code 0585050
UK.
V54.003

Unable to update or restore Ipod due to firmware not found?

Can anyone help me? I've had my Video Ipod for about a year and a half and have never had trouble with it until now. I can't update it to the lastest software as a message comes up Unable to update software due to firmware not being found. I tried to resort to restoring it to the original factory settings but I ran into a message that said Unable to restore ipod due to firmware not found. Has anyone else had this problem? Help!!!

For step-by-step instructions, go here:
http://docs.info.apple.com/article.html?artnum=304309

Downloaded 11.0.3 (42) 64 bit to my MacBook Pro and it crashes every time I select a song a use the 'add to' function to add to a play list. It's never done this before, is it a bug with the new version?

downloaded 11.0.3 (42) 64 bit to my MacBook Pro and it crashes every time I select a song a use the 'add to' function to add to a play list. It's never done this before, is it a bug with the new version?

You could just disable updates. Change these settings in about:config.
* app.update.auto - set to false
* app.update.enabled - set to false
You can still check for updates with the "Check for Updates" button in the About Firefox window, but it will download the update file anyway if there is an update available. You can also check which is the current release from here:
* http://sjc.mozilla.com/en-US/firefox/new/

Firmware bug found in RV042 Version: 1.3.9

Similar Messages

Maybe you are looking for