Fixed Rate in KP26

Hi,
We are using the scenario of automatic calculation of activity rates in KP26.
We have 7 activities maintained against particular cost center each of which has planned activity.
We have certain fixed costs assessed to each cost center with receiver tracing factor being one particular activity.
When the KSPI is run, the system distributes the fixed costs equally to all the activities maintained against the particular cost center. Thereafter, the system divides this fixed cost by the planned activity for each activity type.
Our requirement is, the result of the assessment cycle should be posted only to the activity mentioned in the receiver tracing factor, so that it is not subsequently distributed within all 7 activities maintained against the particular cost center.
Please provide some solution in this regard.

Hi Swapvik,
Pls try to configure the "Splitting Structure" available for this purpose. This is used to allocate the Activity-Independent cost (fixed cost in your case) in a Cost Centers among different Activity Types when there are more than one Activity Type planned on that Cost Center.
You can restrict your certain Cost Elements (fixed cost) to certain Activity/Activities in the splitting structure.
Pls refer the following link for better understanding...
http://help.sap.com/saphelp_47x200/helpdata/en/5b/d2200743c611d182b30000e829fbfe/frameset.htm
Pls revert back for further explanation..
Srikanth Munnaluri

Similar Messages

Issue of Material on free /Fixed rate recovery basis to contractor

Hi friends,
I have one scenerios as follows:
Purchasing dept. issues one contract to service provider with some conditions like some of the material willbe issued on free basis, some of the material willbe issued on fixed rate recovery basis. Is there any facility to-be provided in contracts with materials and fixed prices otherthan sub-contracting procedures.
with 541 movement type we are transferring our material to contractor and simulateneously he will submit monthly consumption statement, based on the statement we have to book that qty for project consumption. Can we book consumption from vendor stock?
Please guide me. If required i will provide further details..
Awaiting for reply..

Hi,
The best way to handle this scenarion in ps:
1.The vendor who is engaged to carry out services for the project can be charged with service entry sheet , which is the simplest way rather than using claims management.
2. If the vendor is engaged for the project & he has been instructed for free issue of material for services, If any case he has been charged with extra materials,So in that scenario for the extra service done by the vendor to the material will be charged, and this amount can be increased through po ammnedment for invoice to that vendor, rather than FI postings & claim management, And remaing process of collecting the material from stores on reservation basis, & issueing material to vendor for free issue will be same scenaio.
Regards,
RSPSBZ

CYP2EUR fix rate exceed 5 decimal place/RATIO change?

Exchange rate for EUR:CYP (fix rate) is 0,585274 which exceed the SAP allowance 5 decimal place.
Can you advice what should be done in the system to enter the exchange rate above? Should we change to ratio (TCURF) from 1:1 to 10:1 or 100:1? Is there any impact if the ratio is changed?
Note: We are using SAP4.0B.

Hi
This can be done through T.Code - OY04.
Caution:- This configuration step has Cross- Client effects. So be careful.
Cheers
V.Krishnan
(Assign Points if Useful)

May i use a fixed rate parrelling a spot rate in the PO INVOICE PAYMENT?

My system is using the spot rate,but i wanna one of the PO use the fixed rate.
How could i realize it?
rgds
safin

Yes you can use the fixed rate. Create a rate type and fix the rate in the newly created rate type. When you want the fixed rate always select fixed rate type rather then spot.

Exchange rate should be a fixed rate instead of the updated financial rate.

For import and reconciliation purposes the used exchange rate should be a fixed rate in stead of the updated financial rate.
Customer want to use u20AC 1 = $1.25 from now on as fixed rate for products validated in Euro in his system to convert into USD on commercial invoice and or shipping invoice for shipments going into the US.
Thanks in advance
Jeewnath

What is the exchange rate type used? I think we can do it by exchange rate type M.
Thanks
Krishna.

Unable to find the exact layout for uploading Activity Rates in KP26

Hi,
I am trying to upload excel into KP26, but I am getting error message as
File description ABC does not exist.
I am unable to resolve this problem.
I tried creating separate Profile in KP65, but unable to to create layout for KP26.
Can anyone suggest the entire process to upload the excel in KP26.
I am trying to upload Activity Rates in KP26.
Please advice.

Hi,
Pleaes delete file description for relevant planning layout as described in
SAP Note 319713 part 5A ( this will make sure that newly
generated file description will up to date).
Best regards,
Ronghua Fan

Excel post journal with fixed rate

Urgent -There is any transaction as to be able to upload one or more transactions from an excel with a fixed rate without getting the rates from the SAP exchange rate table? Its like a normal G/L document posting but with a fixed rate. And with capability of being parked without changing the fixed rate previously imputed.
Thanks and best regards,
Nuno

Hi Juan,
Have you tried this opening the form settings of the Journal Entry and in the document tab have you unchecked convert FC to LC field.
[https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=21694122] as per the note it is only used for reporting purpose. to manually change you will need to uncheck the convert FC to LC
Regards,
Rakesh N

Fixed rate indicator flag in transaction OC47

Hi,
There is a flag which can be used when we maintain exchange rate types in IMG or transaction OC47.
2) Fixed rate indicator flag : Exchange rate type useS fixed exchange rates (field XFIXD in table TCURV)
What is the functionality behind this flag ?
Note: I have gone through SAP documentation but it is not very clear...
Regards,
Rajesh.

Hi......
Instead of calculating the exchange rate the system takes a fixed amount while you enter the currency in any transaction.
SAP Documentation is something like this:
Indicator: Exchange rate type uses fixed exchange rates
    Describes an exchange rate type that works with fixed exchange rates.
    Exchange rate fixing affects the application if exchange rates are to be
    calculated from currency amounts you have entered. In this case, the
    system may continue processing using the fixed exchange rate instead of
    the exchange rate calculated. If exchange rates other than the fixed
    exchange rates are used, the system displays warning messages or error
    messages.
Example
    1. As from 01.01.1999, the currencies of the Member States of
       European Monetary Union are fixed.
    2. If the exchange rate type is G (which functions as the bank buying
       rate to the average rate M) and this indicator is set, one fixed
       exchange rate only is used.
Award points if useful
Thanks
Aravind
Message was edited by:
        A.Aravind

Revaluation with fixed rate

LC and SC is CAD. Revaluation checkbox marked in CoA. I want to run revaluation in Trial Balance for US$ account.Revaluation will be in CAD.
When I run Trial Balance report to show revalution without booking the entry, it doesnu2019t matter what you put in the fixed rate field, the rate used in the report stays the same.

Dear,
The effect of the 'Fixed Exchange Rate' setting can only be seen running
financial reports like trhe Balance Sheet or the Trial Balance where
the User can choose to Revaluate the Balance by certain parameters.
In the Revaluation setting is possible to set the Revaluation Method
by fixed rate, if there is choosed any fixed rate, the report is
revaluated by that rate.
This scenario will only take place under two conditions:
1. If, in the Revaluation window, the 'Refer to Rates in Posting
(Journal Entry)' checkbox is ticked.
2. If under 'Financials- Chart of Accounts' the option 'Reval.
(Currency)' is active.
Thanks.
Regards,
Apple

Fixed rate / adsl | slow speed connection

Hi guys
Around 2 weeks ago I've installed my "Unlimited Broadband" 16 Mbps BT package. I'm connected to the main socket, I tried both filters, I tested speed on various speed tests on both wifi and ethernet and never exceeded 2 Mbps. My router is BT Home Hub 4.
It seems to me that I'm experiencing fixed rate connection speed instead of the one I'm paying for..
My result from speedtest.btwholesale.com:
http://i.imgur.com/ZddfV6r.png
result from dslchecker.bt.com for my phone number:
http://i.imgur.com/yp2SiTv.png

dfenceman wrote:
Is it not unusual for someone with low speed to be put on ADSL2 lately ?
I agree with you that for some reason some customers do get on adsl2 right from the outset even though conenction speed is <8mb - that's wholesale for you a rule unto themselves very similar to openreach
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Fixed rate OC12 to MRC in different slot? Rebuild circuits?

Is it possible to upgrade a fixed rate OC12 card that's part of a UPSR to an MRC card that's in a different slot without rebuilding the circuits? I can't think of any other way to accomplish this without rebuilding. Please help.
Thanks for your time,
-Jason

You should be able to use the ONS 15454's Bridge & Roll functionality to move circuits from one port/card to another port/card.
http://www.cisco.com/en/US/docs/optical/15000r9_0/15454/sdh/procedure/guide/454e90_managecircuit.html#wp229712
Hope this helps!
Tom

Fixed rate for currency not fixed in the PO

Hi,
In me21N, when we create an order for a different currency than the company currency, the defaut rate appears in the header. This is normal.
There is a possibility to fix the rate (the box to tick just next to the rate) : in this case, the same rate will apply in the invoice, even if defaut rate has been changed in the customizing
-> Can you confirm this ?
We have a case where a user, set a different rate than the default one (because of a negociation with the vendor) and tick on "fixed". The issue is that when the PO is saved or released, the default rate erase the one entered manually !
-> Is this the normal behaviour or a system error ?
-> Is there any standard way to not refresh a manual entry by the default one ?
Thank you,
Isabelle

There is a possibility to fix the rate (the box to tick just next to the rate) : in this case, the same rate will apply in the invoice, even if defaut rate has been changed in the customizing
-> Can you confirm this ?
Answer: Yes correct
We have a case where a user, set a different rate than the default one (because of a negociation with the vendor) and tick on "fixed". The issue is that when the PO is saved or released, the default rate erase the one entered manually !
-> Is this the normal behaviour or a system error ?
Yes it is as per standard SAP practice
-> Is there any standard way to not refresh a manual entry by the default one ?
Do not put indicator in PO fixed, system will take exchange rate from OB08, which is to be maintained as per current exchange rate. there is no significant advantage in fixing exchage rate in PO.

Fixed-Rate Age-Based Insurance Plan

Hi SAP Benefits experts,
We have a new insurance offering this year wherein employee rates are determined by the employee's age at the time of initial enrollment. If an employee enrolls at, say age 25, his or her rates will not increase as the years roll by, even though the employee is now 65. Our other age-based plans allow for moving rates, so that as the employee ages, his or her rates will adjust.
How do I configure a plan to hold the initial rate that an employee qualifies for to be constant as time advances? I thought I would be able to use the Age Basis fields in the Cost Variant screen in IMG. However that only allows for a day and month. I think it would require a year as well for this to manage a fixed cost.
Thanks in advance.
Yvonne

Plz check below function
create or replace function cacl_roi
(p_dep_prd number, ----- deposit amount in years
p_unit varchar2 default 'D', -------unit of time (years/days)
p_mode varchar2 default 'X', ------Renew mode
p_gen varchar2, ------geneder M/F
p_work varchar2, --------working/non-working
p_age number , --------Age
p_anninc number ------Annual income
return number is
num_prd number;
l_roi number;
begin
select decode(p_unit,'Y',p_dep_prd*365,p_dep_prd) into num_prd from dual;
if p_age < 65 then
if num_prd >= 120 and num_prd <=240 then l_roi := 6;
elsif num_prd >= 241 and num_prd <= (2*365) then l_roi := 6.5;
elsif num_prd >= (2*365)+1 and num_prd <= (4*365) then l_roi := 7;
elsif num_prd >= (4*365)+1 then l_roi := 8;
end if;
If p_mode ='R' then l_roi := l_roi+0.5;
end if;
if p_gen = 'F' then l_roi := l_roi + 0.5;
end if;
if p_work = 'W' then l_roi := l_roi - 0.5;
end if;
end if;
if p_age > 65 then l_roi := 9;
end if;
if p_anninc > 10 then l_roi := l_roi + 0.1;
end if;
return l_roi;
end;
/

Exchange fix rate on payment transaction F110 or f-53

Hello
I would like to know if it is possible to get the exchange rate on the payment automatically taken from the one fixed on the invoice without taken it by manual input on payment or automatic input through the exchange rate table.
Regards
Xavier DELAHOUSSE

Hi,
Try below mentioned stesp....
1) Create a substitution to replace translation date UMRD2/UMRD3 through an user exit.
2) Update code for picking invoice date translation date.
Best Regards,
Madhu

Rates in KP26

Hi guys,
for transaction kp26. Is there any functions available for me to check when the rate is being uploaded? Thanks.
Regards
Yiming

Hi,
it seems, you are calculating the prices out of SAP and loading / manually inputting the prices through KP26.
Use transaction KSBT which will give you the prices in a tabular format against each cost center and Activity type. you can check against the spreadsheet / other file which has been used for manual entry.
Cheers !!!
Siva

Fixed Rate in KP26

Similar Messages

Maybe you are looking for