Fixing row characteristics in sap bi report using query designer

Hello ,
I have requirement as follows :
In my sap bi report there are row characteristics in sequence as follows :
1) zone 2) project description 3) wbs hirarchy 4) wbs description
and free characteristics as
1) name of vendor
2) network description .
3) network
Requirement is : I nee to freeze the first 3 row characteristics means no one can drag and drop free characteristics in between these ( i mean he can't drop free characteristics between zone and project description ) . Also , he can't drag an drop any of these to free characteristics .
He can drag and drop after these rows characteristics .
Any idea how it can be implemented in query designer

Its still same.
http://help.sap.com/saphelp_nw04s/helpdata/en/4d/e2bebb41da1d42917100471b364efa/content.htm

Similar Messages

Combine two reports in query designer using key figure with sap exit

Hi experts,
i want to combine two reports in query designer using key figure with sap exit
in the report 1 key figure calculation based on the open on key date(0P_DATE_OPEN)
to calculate due and not due in two columns
in report 2 key figure calculate in the time zones using given in variable Grid Width (0DPM_BV0) like due in 1 to 30 days, 31 to 60 days...the due amount based on the open on key date(0P_DATE_OPEN)
to calculate in 1-30, 31-60, 61-90, 91-120, 121-150 and >150 days in 6 columns
now i have requirement like this
not due, 1-30, 31-60, >60, due,1-30, 31-60, >60 in 8 columns
or
not due, due, 1-30, 31-60, 61-90, 91-120, 121-150 and >150 in 8 col
thank you

Hi Dirk,
you perhaps know my requirement,
for the management to make used in one report,
we have in reporting finacials Ehp3.
Vendor Due Date Analysis - which show due, not due
Vendor Overdue Analysis - show only due and analysis in time grid frame
i want to combine in one report that show NOT DUE, DUE, DUE time frames in grid.
krish...

Report Using Query

Hi Gurus,
In Lead Transaction, Details Tab there is field called Campaign, i req. the table name for that field bec. i have to generate the report using Query?

Hi Milind,
Create a new Transport Request.
Now Go to RSA1->Transport connections, select your query and drag to the Right hand side.
Now select all the query elements for that query and click on the Truck (Transport button), It will ask you for the transport Request. Provide the Transport Request Number you have just created.
Once done, just to be sure, check the Transport requests elements in SE09. Check if all the query elements have been included in the report.
Now you will be able to modify the query in Query designer. If still not able to, then you must missed some of the query elements. Again check this in Transport Connection.
Regards,
Pratap Sone

Query for recurring reports using Query Builder in Business objects

1. How to count webi Recurring reports using query builder in business objects? (Need Query for this)
2. How to count Crystal Recurring reports using query builder in business objects? (Need Query for this)
I am able to get summerized recurring reports using Query Builder.
For Example we have 343 reports which are under recurring (This includes both Webi Reports and Crystal Reports).
we need to get individually how many webi reports are under Recurring and Crystal reports are under Recurring.

1. How to count webi Recurring reports using query builder in business objects? (Need Query for this)
2. How to count Crystal Recurring reports using query builder in business objects? (Need Query for this)
I am able to get summerized recurring reports using Query Builder.
For Example we have 343 reports which are under recurring (This includes both Webi Reports and Crystal Reports).
we need to get individually how many webi reports are under Recurring and Crystal reports are under Recurring.

Is possible to see group currency data in SAP provide report or query ?

Dear experts:
Is possible to see group currency data in SAP provide report or query for Assets. When the Depreciation area currency is different with the group currency?
My SAP version is ECC 6.0.
Depreciation area currency: USD,
Company code currency: USD,
Second local currency: Group currency(TWD)

You must have defined an additional dep area for group valuation too.
then only you can get the asset values in TWD curency.

Maximum number of records displayed on the browser using Query Designer.

When you display a query on the web using Query Designer is there a maximum limit of how many records (rows) it can display? For example, can it handle 25 million records?
Thanks.

Hi Sebastian,
I still find such a requirement weird as one cannot definitely go thru' so much of data at a time - it would thus always make sense to perhaps filter on some criteria which would make analysis & perhaps even download much faster. The limit as I understand is approx 750,000 data cells. Maybe the below link & SAP notes can help validate
Limitation in No. Of data cells displayed in BEx Analyzer
SAP Notes :-
Note 1040454 - Front-end memory requirement of the BEx Analyzer
Note 1030279 - Reports with very large result sets/BI Java
Note 1411545 - BExAnalyzer: safety belt for large resultsets
--Priya

Not getting Report Model Query Designer in SSRS

I am working on SQL Server reporting Service(SSRS) with Report Builder 3. I successfully connected Data Source with Oracle Server. When I working in Report Builder I did not find Report Model Query Designer. How can I find this?
How can it possible to merge dataset with datasource(database entity) in SSRS?
Please help me.

Hi Jewel,
To enable Report Model Query Designer in Report Builder, we need use Report Model as the datasource. Report models can be used as data sources for reports created in Report Designer and Report Builder 3.0.
So in your scenario, you need to create a Report Model project in SQL Server Business Intelligence Development Studio (BIDS), and then deploy this report model to report server. Then in Report Builder, you can use this report model as datasource and open
Report Model Query Designer window.
Reference.
Report Models (Report Builder 3.0 and SSRS)
Tutorial: Creating a Report Model
If I have anything misunderstood, please point it out.
Regards,
Charlie Liao
TechNet Community Support

Error while executing report in query designer

Dear Folks,
I am geting following error while executing report in query designer.
Error:500 E
an exception raised because of 0analysis pattern.
Hence,i am unable to execute any report.
Need help.
Thanks

Hi Kitu G,
I think this is something to do with the bex web 0ANALYSIS* objects not being installed in your BW system.
I would try and do the following:
- Goto RSA1 > BI Content > BEx Web Template (BTMP)
- Then double-click on Select Object.
- Highlight all objects that start with 0ANALYSIS_PATTERN
- Click on Transfer Selections, and then Install.
If you can't do the above in prd, do it in DEV, then transport the objects to prd.
After all this, try re-running your queries.
Any questions/clarification just let me know
Cheers.
Darwin

Acceesing Metadata using Query designer.

Hi all,
Is it possible to access the metadata of underlying infoproviders in a multiprovider by building a query on the multiprovider ?? Or is it possible to capture th metadata details of the multiprovider using Query Designer ?
Regards
Snehith.

Hi Venkat.
Thanks for the reply. I am looking at something like accessing what are the various characterisctics, key figures, and dimensions and the assignments in the multiprovider, and such related data.
Regards
Snehith.

SAP Crystal Report using SQL Server Authentication and Windows Authenticati

I'm a SAP Crystal Report, version for Visual Studio 2010 Beginner
my ingredients are
1.windows 7 ultimate service pack1
2.sql server 2008 standard edition
3.visual studio 2010 pro
4.SAP Crystal Report, version for visual studio.net
I was created a report named customersByCity.rpt using OLE DB (ADO) -> Microsoft OLE DB Provider for SQL Server -> I'm supply Server, User ID, Password and Database. I assume me using SQL Server Authentication for my report
Then, my ASP.NET files as following
//ASP.NET
<%@ Page Language="C#" AutoEventWireup="true" CodeFile="viewCustomersByCity.aspx.cs" Inherits="viewCustomersByCity" %>
<%@ Register Assembly="CrystalDecisions.Web, Version=13.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"
    Namespace="CrystalDecisions.Web" TagPrefix="CR" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head runat="server">
    <title></title>
</head>
<body>
    <form id="form1" runat="server">
    <div><asp:Label ID="lblMsg" runat="server" BackColor="Yellow" ForeColor="Black"></asp:Label>
<CR:CrystalReportViewer ID="CrystalReportViewer1" runat="server" AutoDataBind="true"></CR:CrystalReportViewer>
    </div>
    </form>
</body>
</html>
//code-behind
using System;
using System.Collections.Generic;
using System.Linq;
using System.Web;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Collections;
using CrystalDecisions.CrystalReports.Engine;
using CrystalDecisions.Shared;
public partial class viewCustomersByCity : System.Web.UI.Page
    private const string PARAMETER_FIELD_NAME = "city";
    private ReportDocument customersByCityReport;
    private void ConfigureCrystalReports()
        ConnectionInfo connectionInfo = new ConnectionInfo();
        connectionInfo.ServerName = @"WKM1925-PCWKM1925";
        connectionInfo.DatabaseName = "Northwind";
        connectionInfo.UserID = "sa";
        connectionInfo.Password = "sysadmin25";
        SetDBLogonForReport(connectionInfo);
    private void SetDBLogonForReport(ConnectionInfo connectionInfo)
        TableLogOnInfos tableLogOnInfos = CrystalReportViewer1.LogOnInfo;
        foreach (TableLogOnInfo tableLogOnInfo in tableLogOnInfos)
            tableLogOnInfo.ConnectionInfo = connectionInfo;
    private void SetCurrentValuesForParameterField(ReportDocument reportDocument, ArrayList arrayList)
        ParameterValues currentParameterValues = new ParameterValues();
        foreach (object submittedValue in arrayList)
            ParameterDiscreteValue parameterDiscreteValue = new ParameterDiscreteValue();
            parameterDiscreteValue.Value = submittedValue.ToString();
            currentParameterValues.Add(parameterDiscreteValue);
        ParameterFieldDefinitions parameterFieldDefinitions = reportDocument.DataDefinition.ParameterFields;
        ParameterFieldDefinition parameterFieldDefinition = parameterFieldDefinitions[PARAMETER_FIELD_NAME];
        parameterFieldDefinition.ApplyCurrentValues(currentParameterValues);
    protected void Page_Load(object sender, EventArgs e)
        customersByCityReport = new ReportDocument();
        string reportPath = Server.MapPath("customersByCity.rpt");
        customersByCityReport.Load(reportPath);
        ConfigureCrystalReports();
        ArrayList arrayList = new ArrayList();
        arrayList.Add("paris");
        arrayList.Add("Madrid");
        arrayList.Add("Marseille");
        arrayList.Add("Buenos Aires");
        arrayList.Add("Sao Paulo");
        ParameterFields parameterFields = CrystalReportViewer1.ParameterFieldInfo;
        SetCurrentValuesForParameterField(customersByCityReport, arrayList);
        CrystalReportViewer1.ReportSource = customersByCityReport;
1st scenario
When in a runtime, it's keep appear a dialog box. This dialog box ask me to suppy Server, User ID, Password and Database. Once all information is supplied, my report display the data as expected
2nd scenario
I change my report using OLE DB (ADO) -> Microsoft OLE DB Provider for SQL Server -> checked on Integrated Security. I just choose Server, and Database. I assume me using Windows Authentication
When in a runtime, there's no dialog box as above. My report display the data as expected. really cool
Look's like, when report using SQL Server Authentication there's some problem. but, when report using Windows Authentication, it's fine.
I'm looking for comment. Please help me

Hello,
MS SQL Server 2008 requires you to install the MS Client Tools for 2008.
Once install then update all of your reports to use the SQL Native 10 as the OLE DB driver.
The try again, if it still fails search, lots of sample log on code in this forum.
Don

Difference: SAP BW Report iview - Query iView - URL iView

Hi,
I want to show BW reports on the portal. Can anybody suggest me the different ways of doing it ? And also let me know about checklist of steps that need to be performed.
Can anybody tell me the difference between showing BW reports through URL iviews, showing reports through Query iView and showing reports through SAP BW Report iView ?
Which one can i use for showing BW reports taking into consideration the implementation of SSO between the two? I tried the URL iView (using the Web URL of reports generated by BW) but it asks for Username/password. Is that the problem with SSO. How can i check if SSO parameters have been set or not. I have imported the verify.der to BW System and added that to ACL. Is there anything else which is required?
Thanks in advance.
Rgds,
MA

Hi Manoj,
I feel BW report iview will solve your problem. You can create a query sting in BW query designer and give the same in BW query string text area while creating BW report iview.
In the case of an url iview you are just giving a URL link of the BW report (this will ask for username/password).
But, in the case of a BW report iview you can view the required query as an iview (user mapping can be successfully done in this case) You should give fully qualified domain name in Was server option while creating the system.
While using the logon ticket Login id of both the system (ie BW and Portal) should be the same.
Refer the link for SSO using logon ticket)
User Mapping-based Single Sign On
Regards,
Vinod

Design Time Connection of SAP Server failure using TIBCO Designer

Hi All,
While Connection to SAP Server using TIBCO Designer using Design Connection Configuration followed error we are facing.
Connection Error. Unable to Create a Connection with the target application bdhn4973.na.pg.com using connection parameters
programID=BWAH-IFS-L6A430 gatewayService=sapgw00 and the target application error is 102RFC_ERROR_COMMUNICATIONConnect to SAP gateway failedConnect_PM TPNAME=BWAH-IFS-L6A430, GWHOST=bhdn4973.na.pg.com, GWSERV=3300LOCATION CPIC (TCP/IP) on local ost with Unicode ERROR partner 'bdhn4973.na.pg.com:3300' not reached TIME Mon Jul 18 03:28:21 2011 RELEASE 720 COMPONENT NI (network interface) VERSION 40RC - 10 MODULE nixxi.cppLINE 3284DETAIL NiPConnect2: 155.125.167.58:3300SYSTEM CALL connectERRNO 239 ERRNO TEXT Connection refusedCOUNTER 6
Note: SAP Server is running but still we are not able to connect from TIBCO Designer. Few times it's able to connect and few time it will throw an error while connecting to SAP Server.
Can you please help me if any one you have any idea regarding this.
Regards,
Vijaya

Hi,
Since you are able to connect, seems the issue with network instability.
1) Create an RFC connection and perform the connection test. Note down the time taken (milli seconds), a notable delay also can be the cause of the issue.
2) Do the ping from Tibco system to SAP and note down the time taken
3)Also check the firewalls in between the two systems and check the valid access
You may need Nework admin teams help to cross check these.
Regards,
Syed

Front End - Reports on Query Designer

Hi All,
Could you please help me in creating Queries for the following requirement?
Reports
1. 10 entries of customer sales report
2. customer/material wise sales analyses ( show report in USD dollar )
3. sales office, sales report using hiearchy
4. sales representative wise planned vs actual sales report using WAD
I am not able to understand which fields should go to Rows / Charecterestics etc....
The details are as follows:
1. master data - strong entities
   a. customer ( master data )
1) country as aboves Navigational attribute
2)customer name - Display attribute
3) cust location - Display attribute
   b. sales office
   c. sales region
   d. sales representative ( master data )
   e. material ( master data )
1) material group as aboves Navigational attribute
2. material name (display attribute)
3. material group (display attribute)
USE cal day and cal month as time chars
KEY FIGURES
1. planned target sales
2. actual sales quantity
3. unit price ( by mterial )
4. actual sales value
5. service percentage
6. net order value ( trans formula ) create formula?
Thanks & Regards,
Sonali

Hello,
there is a option which you can insert your IO at infoprovider level.
in RSA1> infoprovider button>right click on your infoarea and say INSER CHARACTERISTIC AS INFOPROVIDER.
in multiprovide you can select the same characteristic, after you selecting it plese assign the char and keyfigures to populate the required fields data from this info object master data.
hope this will helps you
Thanks
Ramesh.

Combine two reports in query designer

Hi experts,
i want to ombine two reports which are using key figure with sap exit in query designer
in the report 1 key figure calculation based on the open on key date(0P_DATE_OPEN)
to calculate due and not due in two columns
in report 2 key figure calculate in the time zones using given in variable Grid Width (0DPM_BV0) like due in 1 to 30 days, 31 to 60 days...the due amount based on the open on key date(0P_DATE_OPEN)
to calculate in 1-30, 31-60, 61-90, 91-120, 121-150 and >150 days in 6 columns
now i have requirement like this
not due, 1-30, 31-60, >60, due,1-30, 31-60, >60 in 8 columns
or
not due, due, 1-30, 31-60, 61-90, 91-120, 121-150 and >150 in 8 col
thank you

Hi,
Have you tried APD?
You can combine them using workbook or from a multiprovider query. APD is another option. Have a look at these APD docs:
In APD, you can take input from two queries, then combine them and load to another object (DSO).
[Analysis Process Designer |https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/413ba6c1-0d01-0010-1980-ec450e30f23c]
[AGSAP NetWeaver 7.0 Application Process Designer|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b06c3f96-ed4f-2a10-1693-f2c76a39988f]
Let me know where you r stuck...
Regards,
Ashish

Using Query Designer both for 3.5 and 7.0

Hi all,
<u>Is it possible to use different Query Designer versions (3.5 and 7.0) parallelly on the same machine ?</u>
I have customer A using BW 3.5 and new customer B who will use 7.0.
I need to install Query Designer 7.0 and create reports for customer B.
But I still need to maintain customer A's queries and they were created via QDesigner 3.5.
Since I'll just have QDesigner 7.0 finally, if I use it to edit these 3.5 queries, they won't be editable again via 3.5 Query Designer. Which means they'll seems as corrupt for the customer, since they can't open them with their own query designer (3.5)
I need to reach all queries for all customer systems via their own version of Query Designer.
I wonder what's SAP solution to handle this situation.

Hello Rozz,
You can run both the query Designers on Bi7.0 System.
But, you can not access the same query using the both query designers.
Regards,
BVC

Fixing row characteristics in sap bi report using query designer

Similar Messages

Maybe you are looking for