Flash Firmware for Pioneer DVR-K06

Anyone know a way to flash the DVR-K06 drive with the newest firmware withing OS X. Don't really wanna install Windows just to flash the dvd drive.

Hello and Welcome to Apple Discussions. 
The only firmware update for iMac G4 is available here. OEMs are never as good as supporting Macs for upgrades like the firmware you've found.
Apply the firmware if it applied to your version of the iMac G4.
Try burning disks at 1x speed.
Using a drive cleaning disk to clean the drive lens.
Different brands of media (and then stick with that type - I realise that when Tesco or whatever have an offer on media it's tempting to go with them (although that's what I do)).
mrtotes

Similar Messages

  • Any way to upgrade firmware for Pioneer DVR-K06 DVD-RW drive?

    Finally got around to replacing the factory SuperDrive in my Mac mini the other day. The original drive NEVER worked right out of the box -- would read some CDs but not others, always barfed on burning DL DVDs, etc. My last experience with getting a mini fixed under warranty (mobo on my 1.42 G4 took a dump after a few months) involved two three-hour round trips to the nearest (and I use the term loosely) Apple Store for service. It was cheaper for me to just replace the optical drive in this one than to do that drive again.
    Anyway, enough complaining. The replacement drive has firmware v1.01 and I would like to get it up to the latest available firmware to take advantage of any compatibility, stability, etc. fixes since v1.01. Problem is that I can't find any software that supports flashing the K06 drive. Hope someone here has a solution. I don't have a Windows machine with appropriate connectors to hook the drive up to or I'd go that route ... plus I'd much rather do it on a Mac just on principle ... plus I don't want to have to disassemble the mini again.
    Any solution?

    Hello Sang,
    I have Sun Ultra 40 Workstation which comes with Matshita DVD-RAM drive.
    Mine has D100 firmware and I find other people who has the same drive on different system have D101, D200, D201 firmware.
    So does anyone know how to contact Sun to get the latest firmware for my DVD-RAM drive?
    I did contacted Matshita for this matter and they tell me to contact Sun.
    I did review the Full Components List for the Ultra 40. The only DVD drives listed (Part No. 370-7970) are Panasonic UJ-485 and Teac DV-W28SLA-093. Both aren't capable of reading or writing DVD-RAM.
    In some countries Panasonic uses Matshita as brand name.
    I did a search on SunSolve with the keywords DVD firmware.
    Sun supplies only firmware updates for two DVD readers: Toshiba DVD 1401 (fixes: unable to boot from Solaris 8 DVD) and Toshiba SD-C2732 (fixes: returns incorrect data).
    I was unable to update the firmware of the SD-C2732 (Sun part) with the Sun patch. The drive was attached to an Ultra 10 (with an adapter). I ended attaching the drive to a PC and using a DOS boot floppy with the Toshiba flash program and the Sun firmware.
    Regarding you problems with the drive: Have you tried another brand of media. The Ultra 40 is under warranty (GA date was February 14, 2006).
    Use the contact information from your other thread.
    If you search the net for firmware you can locate sites that offers region-code-free firmware for several drives. Usually they provide a flash program (requires creation of a DOS boot floppy). Using these programs/firmware voids your warranty. Maybe you can not revert the firmware upgrade.
    These slimline drives have no jumpers, the installed firmware (of the drive) determines if the drive is master, slave, uses cable-select (CS) or reversed CS.
    Michael

  • Firmware for Pioneer DVRKD08A DVD writter - Satellite P300-133

    Got my new Satellite P300-133.
    It has a Pioneer DVRKD08A DVD writer.
    While checking for a firmware update I found that the recommendation is for a different brand - TS-L632H.
    This firmware is obviously to Pioneer - so where can be found the firmware applicable to Pioneer?

    Indeed it seems strange, but in a relative short period of time I already experienced two instances which made me look for such update:
    - A burned DVD-R got an additional session - uncontrolled and unrequired, just by using it a few times - REALLY it's a first in my 10 years of using CD / DVD writers.
    Shortly after, the DVD-R become unusable and I had to burn another one.
    - While using the Toshiba (alias Pioneer) burner, and compared to an identical session using an external SONY DVD writer, at same speed,
    on same DVD RW, took 20% less time on the SONY.
    If there is no such firmware update then I will have to find a careful way to handle the DVD writer till I will reach a conclusion about its serviceability.

  • Firmware for DVR-K12TBS

    Hello,
    is there ja new Firmware for the DVR-K12TBS DVD Writer from Toshiba? (Model No. PA3358E-1DV5)
    My current Firmware is 1.15 (09/2004)
    This is very old and there are many DVD+-R that i can only burn with low speed.
    Thanks.
    Thomas J.

    Hi
    Well, it would be very interesting to know which unit do you have.
    Nevertheless you can check this Toshiba download page:
    http://www.toshiba-europe.com/storage/Index_home.asp?nav=HOM&page=HOM&frame=home&model=x
    or this one:
    http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
    Bye

  • Tiger and pc version of the Pioneer DVR-110D problems

    ok here we go
    I have tried the Beige G3 part of this forum with no luck cause i use a Beige G3 AIO
    ok i have a Beige G3 AIO with a pc version of the pioneer DVR-110D running tiger 10.4.7 the drive will hardly work in tiger but will work flawlessly in 10.2 - 10.2.8, OS 9.x, windows 98, windows xp
    the only way this drive will work in tiger is if i reboot with a disk in the drive and then it will work. but it will some times decide to stop working after 20 minutes or until i take out the disk.
    some times it will stay working until i try to play dvd movies or try to burn with it then it will stop working and have to reboot with a disk in the drive in order to get it working again. if i don't reboot with a disk in the drive the drive will not work at all until i reboot with a disk in the drive.
    im not sure if tiger is using a wrong driver for the drive or what. i know the drive is not bad cause it works so good under OS 9 and OS X 10.2 - 10.2.8. i can burn i app's under OS 9.2.2 with a modded pioneercdr authoring extension, and i can burn under OS X 10.2 - 10.2.8 with patchburn. but tiger refuses to work with the drive.
    other than that tiger is running flawlessly on my Beige G3. the way it seems that its using a improper driver for the drive cause there is a apple branded version of the Pioneer DVR-110D with a modded firmware and a standard PC Pioneer DVR-110D with a pc firmware. if tiger is trying to use the drive as the apple version of the drive it can cause this cause the firmware is totally different from the standard pc version of the drive.
    is there any one that can shed some light on this. maybe a driver edit or something maybe firmware to the apple version so i can try to flash this pc version to the apple firmware. or something. this drive should work as is if it works so great under OS 9.x, OS X 10.2 - 10.2.8, windows 98, and windows xp.
    another problem i have is not being able to boot any OS X cd by normal means. i can get it to boot the 10.2 install cd by having the cd in the drive and hold the command option and power key's for about 5 seconds and some how the drive is tricked to boot and it does but it always fails to install cause the drive stop's working during the copy process.
    the drive will boot the tiget install cd (with help from xpostfacto) without doing the trick to get OS X 10.2 install cd to boot but will still fail during the copy process. i know the fix for this is to get ahold of the apple version firmware for the DVR-110D drive. that also might fix the problem that it has under tiger. but it weird since the drive works great under OS X 10.2 - 10.2.8
    sorry for making this a monster post but i would love to et this drive to work like it should under tiger like it does under the other OS's
    BTW tiger is running great on the old beast besides the pioneer drive problem. not once has tiger failed to boot, not once has tiger crashed, ive timed this system on its boot time into tiger (34 seconds from start chime to full working tiger)its kinda sad to have tiger working so great but has this problem with the pioneer drive

    i didnt say i used patchburn in tiger, only in jaguar did i use patchburn to gain burn support. altho i can try to use patchburn in tiger to see if it would help with the issue. AKA it seems like a driver issue to me
    on how it will mount disk's when i reboot with a disk in the drive but will only halfway work. but will not mount anything if i boot without a disk in the drive when i put a disk in . but ASP in the ATA tap will show the drive . i can select disk burning in ASP only when the drive is working in its halfway state to show info. if i try when its in its non working state is will lock ASP up and some times throw tiger into a kernel panic when i try to reboot . after all that if i leave the drive alone tiger is ok

  • Satellite A210 - can't write DVD-DL - need firmware for LG GSA-T20N

    I have problem with my DVD drive... I can't write DVD-DL discs (DVD+DL too).
    I'm looking for a firmware for my drive.
    On Toshiba Support I can find only firmware for Pioneer and Toshiba (TSSTCorp) drives.
    Lg says that Toshiba should have newest firmware.

    Hi
    I checked the Toshiba European driver page and found tree different firmware updates for TS-L632H, TS-L632 and TS-L632P but there is no update for LG GSA-T20N.
    If you are not able to burn the data on some double layer disks then you should try different brands.
    As far as I know your user manual should contains some details and information about the supported and compatible disks.
    Check it!

  • Question for Mac Pro owners w/Pioneer DVR-112D superdrive: what firmware?

    For those whose Mac Pro came pre-installed with the Pioneer DVR-112D superdrive, what firmware revision is it running?
    The reason I'm asking is that I have an aftermarket 112D, bought from OWC, that I purchased for it's rip/burn speed advantage over the pokey, possibly riplock crippled, Sony DW-150A that came with my Mac Pro. This advantage was indeed gained, but at the expense of living with some quirkiness with the drive, namely the "two-ejects required" problem discussed here:
    http://forums.macrumors.com/showthre...highlight=112D
    This quirkiness has gotten worse since the latest Mac Pro EFI firmware update on 09/27/07. Now if I'm watching a movie from a DVD in the 112D tray, any extended pause (and by extended I only mean more than a minute or so) causes an unrecoverable error in DVD Player and I'm forced to restart the DVD Player and restart the movie.
    My suspicion is that this all has something to do with some (overzealous?) power management feature in Mac OS X that's not playing nice with the existing 112D firmware (I'd be interested in hearing any other plausible theories).
    Currently, my 112D firmware is at revision 1.06. There a number of updated firmware revisions for the 112D circulating on the internet, PC centric, of course and mostly related to disabling region-locking etc.
    I'd like to match my 112D firmware to whatever Mac Pro owners with a 'bona-fide' 112D enjoy, if it's publicly available somewhere.
    Thanks.

    Forrest McElfresh1 wrote:
    The latest Pioneer DVR-112D/212D OEM firmware is v. 1.22 dated august 7, 2007. My general practice is to Avoid Apple firmware on OEM drives, it often disables features and is most infrequently updated.
    My 112D is at version 1.21. Over the years I have successfully updated the firmware in my Pioneers using the Terminal app DVRFlash. But DVRFlash doesn't support the 112 or 111 series (yet). I wondered how you had updated to 1.22. I know it can be done by connecting to a PC, (which includes Bootcamp, but not Parallels) but I don't have ready access to a PC. At the moment I am waiting for Leopard before going Bootcamp way.
    Any advice?
    Hope this isn't hijacking the thread.
    Mike

  • Pioneer DVD-RW DVR-K06 replacement drive needed

    My iMac started having problem ejecting DVD/CDs and now the drive is damaged. I need to find a replacement drive (AppleCare expired). I know there are 2 possible types of superdrives were used on the late 2006 24" iMac. One is with a 12.7mm slot and the other one is 9.5mm. I am not sure which one I should get but here is my specs. I think the DVR-K0-6 is discontinued. Could someone tell me what replacement drive I can use? thx CK
    Pioneer DVD-RW DVR-K06 Firmware: Q609 ATAPI
    Model Identifier: iMac6,1
    Processor Name: Intel Core 2 Duo
    Processor Speed: 2.16 GHz
    Message was edited by: calvin ki

    Hi calvin ki
    You can get either new or refurbished OEM drive from WeLoveMacs
    New Apple Original Part > http://www.welovemacs.com/6614391.html
    Refurbished pulled from a working machine > http://www.welovemacs.com/6614391r.html
    Or for way less $'s an External Drive > http://eshop.macsales.com/shop/firewire/optical-drives/
    Dennis

  • Current Firmware for DVR-110D?

    I just got a DVR 110-D and installed on my G4 running 10.3.9. Seems to be working fine using Patchburn and Toast 7.01. Another post suggested to get the latest revision of firmware installed for the drive. I tried the Pioneer site and they only support updates in windows formats. My drive is listed as rev. 1.11/MMC. Is this the latest rev? If not, do I have to yank the drive and put it into a windows machine to flash it? I am on a network with a windows machine. I could download the patch on there and hope to see the drive across the network for the update if it's even required.
    Thanks,
    Bruce

    I found that the current version of firmware for the 110D is 1.39. I ended up flashing the unit in a windows machine and reinstalling into the mac. Ran Patchburn and the drive runs perfectly on all apple software as well as Toast.
    Done deal!
    Thanks for the help.
    Bruce

  • Help!!!! Update Pioneer DVR-104 Firmware?

    My IMAC G4 SuperDrive doesn't like faster (16x) DVD-R's. There is a firmware update on Pioneer's site that addresses something similar- but it's only for Windows.
    See here: http://pioneer.jp/oshirase/writer/index-e.html
    I found this link for Mac: http://cd-rom.free-driver-download.com/Pioneer/10967/Pioneer-DVR-A04-DVR-104-DVD -RW-RPC-1-Firmware-1.20--For-Mac.html
    Should I trust it, and use it?
    I've been getting the verification error: OX80020063 using 16x Verbatim DVD-R.
    My SuperDrive is currently using firmware revision: A227.

    Hi
    Never had any problems before when burning CDRs, but tonight the SONY DVD RW DW-U10A superdrive just won't play ball. Tried numerous times to burn some playlists off iTunes and the PC kept going through the initialising process and then spitting the disc out with the message: the attempt to burn a disc failed. The device failed to calibrate the laser power for this media.
    Then tried to burn photos in iPhoto and got the message: SONY DVD RW DW-U10A drive failed. The device failed to respond properly, unable to recover or retry.
    HELP!! I'm no expert but it sounds serious!! Strange thing is though I can still play CDs and DVDs.
    Any ideas??
    Cheers
    Mark

  • Firmware for DVR-109?

    Where do you find the firmware update for a Pioneer DVR-109. I found it on the pioneer website but it was a download for windows. I have a PowerMac G5 Dual 2.3 (early 2005 model) and It wont recognize Memorex 16x media in Toast 7. It will only allow me to burn @ 12x. The Apple rep at Comp USA said that all media is compatible with PowerMacs these days. I need help. Thanks.

    no experience but here's a thread
    http://discussions.apple.com/thread.jspa?threadID=119519&start=0&tstart=0

  • Satellite A200-1YU and Pioneer DVR-K17A Firmware Update.

    Could you please give me link to the newest firmware for my Pioneer DVR-K17A (Satellite A200-1YU, Catalog Number: PSAE3E-06201RPL), I was looking for it everywhere, but I couldn't find it, please help me.

    Visit Toshiba download page under http://eu.computers.toshiba-europe.com > Support & Downloads and check if some firmware updates are available.
    If something is offered there you can use it and you will not cancel the warranty.

  • Pioneer superdrive problems / flashing firmware

    I hope someone can help me. I have an alu imac 2007 and after 13 months (and without extended applecare) the dvd drive packed in. I got it replaced by a local apple agent, but i supplied the drive myself, a new pioneer dvr ka06 from a macbook. Here is the problem. The drive works fine but the dvd has to be pushed all the way in to actually take the disk, its a massive pain. I assume that it is set up like this as the drive is closer to the edge of the case in the macbook compared to the imac. According to pioneer the firmware may be the problem. The firmware on the new drive is q609, and on the old drive is q624. Is there any way to flash or update the drive to solve this problem or does anyone else have any ideas.

    It depends (obviously) on how Pioneer flashes the firmware. Some drives can flash on a disc that has the update on it, others require a program run (usually PC based) to trigger the update sequence.
    I'd spend some time on the Pioneer site and maybe call their support... RTFM?

  • Pioneer DVR 106D does not work after firmware update

    I tried to update the firmware of my iMac with DVRFlashX. I failed. No Superdrive is showing up in the system information. DVD can't be removed even with the firmware eject function. No Pioneer drive is found. How do I get the right firmware for the Superdive via Internet to make it work again?

    Hallo und Willkommen zu den Apple Diskussionen. 
    Thanks for taking the time to let us know what happened. I assume this Firmware wasn't supplied by Apple... What updates does it achieve?
    many thanks
    mrtotes

  • Help needed to track down Problem in tiger with Pioneer DVR-110D

    ok as i stated in another topic i own a Beige G3 AIO that is running OS 9.2.2 and OS X 10.4.8 and i have done allot to this system to get it to run faster and to run properly.
    part of this setup has a Pioneer DVR-110D it there and when i bought it i was running OS 9.2.2 only. at first i could not burn anything with it cause it wasn't supported and when i went to put the system to sleep it would freeze when i would wake it up it never did this before i installed the drive so i knew what was causing it.
    i turned off HDD sleep and the problem was fixed. but i didn't like the ideal of having the hdd running all the time when idle. me and a friend was talking about optical drive issues and he said he found this driver replacement for the apple cd/dvd driver called intech speed tool's 6.0 for OS 9.2.2 and that i should give it a try cause it fixed a few problems for him.
    i downloaded the demo of it and installed it and i turned on hdd sleep and put the system to sleep and woke it back up and the system was running great. so now the wake up freeze problem was cured. but still no burn support. so after a few weeks of posting on here about the problem some one came by and said he knew what the problem was and sent me a modded PioneerCDR authoring support extension. i installed it and rebooted and opened iTunes and iTunes showed Pioneer DVR-110D as the devise to burn to. so i tryed it and behold it burned a audio cd with no problems.
    later i bought a western digital SE 120gb hdd and installed it and partitioned it 3 times a 8gb first partition for OS X a second partition 10gb for OS 9.2.2 and the 3rd partition was the rest of the drives size for shared data and storage. the hdd worked great with no issues so it was time to try OS X on this system cause i was waiting to get a large HDD to do so.
    i figured that the Pioneer drive would not boot the OS X jaguar cd and is a known problem with non apple cd rom drives. so i took out the Pioneer and reinstalled the apple 24x stock cd rom drive. and the jag install cd booted without a hitch. Jag installed and was running so i updated to 10.2.8 and found out the internal screen kept going out and locking the system up. so i searched this forum for the onboard video blackout and came across the terminal work around to get the system to behave itself with having more than 192mb ram installed. i rebooted and all went fine afterward.
    i reinstalled the Pioneer drive and went to testing it all was fine everything mounted on the desktop that i put in the drive. but i lacked the ability to burn with the drive cause still the drive wasn't supported be the system so i searched the forum and came across the program called patchburn. i downloaded it and ran it and patched the driver to support iApps burning with this drive. so i put in a blank cd and went to burn in iTunes it burned flawlessly so i tryed a dvd-r with the finder it to burned flawlessly.
    o loved playing a game planeshift and then they stopped supporting 10.2.8 so i went to buy the tiger install cd's. i already knew the Beige G3 was not a supported version of Os X on this system and you had to use xpostfacto 4 to install tiger on this system. so i did what i had to do to install tiger on the system and selected use old NDRV and selected to install tiger. which installed some files to boot tiger and rebooted yet again the Pionner drive refused to boot the install cd's . i got mad and held down the command option power key's for about 10 seconds and let off. the tiger installer booted and got to where it started to copy the files to the hdd and stalled out and the drive spun down never to spin back up or show signs of life so i powered down the system and removed the pioneer drive and put the stock 24x cdrom in and installed tiger.
    after tiger was installed i shut down the system and installed the pioneer drive. and powered back on and it was in verbose mode showing what was going on one part showed that the Pioneer drive was detected but had no kernel dependencies and continued to boot. i went to repair the permitions when the onboard video went blank and the system locked up. i rembered that 10.2.8 did the same thing so i tried the 10.2.8 screen blackout fix in 10.4 and rebooted. the onboard video didnt come on but since i had a ATI Radeon 7000 i could work around in tiger to update to 10.4.7 at the time. i first repaired permitions and then ran software update and updated everything and rebooted. the onboard video came back on allong with the ATI Radeon 7000 which being used as boot video device and shown the gray apple logo with the spinning pin wheel at the bottom.
    so far tiger was running great so i put a disk in the drive and nothing it didn't mount anything so i ejected it with the button on front of the drive and tryed a dvd movie and got the same nothing as with the cd. so i rebooted with the dvd in the drive al behold tiger mounted the dvd but as soon as i would try to do anything with it the drive would stop and i would have to reboot the system to gain the drive back so i can repair permissions. and never tryed to use the drive again
    10.4.8 update came out i updated to it using software update and rebooted. the update went flawless so i thought to myself what if the pioneer drive worked now. so i put a cd in the drive and it mounted the disk. then i ejected it with amazement and put a dvd in and it to mounted. so i tryed to play the dvd and it played the dvd to the end of the movie. i took out the dvd and rebooted. i tryed to put the dvd back in but it didnt mount. which ****** me off as to why it was just working and now its not.
    i rebooted and the dvd mounted as soon as the desktop showed up so i tried to play it but this time it only played for about 10-13 minutes before the drive stopped spinning which made dvd player stop responding which made me have to force quit the dvd player and try to restart which gave me a kernel panic. so i forced restarted (got a forum to send to apple to report the KP so i did) and the dvd mounted once again as soon as the desktop showed so i ejected the dvd and put a audio cd in and it mounted and i played the hole cd. so i ejected that and put a blank cd in and treed to burn and it got to 30% and then the drive spun down and made the disk utility stop responding. so i forced quit disk utility and rebooted. once it rebooted nothing popped up so i pressed the eject button on the drive and the cd r came out.
    the OS X 10.4.8 update made the drive more stable but still wont burn anything. some times it will still not mount anything, some time it will not play anything, and still fails to copy files over to the hdd. so now im left to believe its a driver issue some where since this drive worked so flawlessly in jaguar and OS 9 but fails to work properly in tiger.
    i looked in the extensions in ASP in 10.4.8 and there is a few extensions showing errors. i made a list of them to show
    PatchedAppleNVRAM:
    Version: 3.0
    Last Modified: 8/9/05 6:07 PM
    Location: /System/Library/Extensions/PatchedAppleNVRAM.kext
    kext Version: 3.0
    Load Address: 0x4db000
    Valid: Yes
    Authentic: Yes
    Dependencies: Incomplete
    Dependency Errors:
    com.macsales.iokit.OpenOldWorldNVRAM: No valid version of this dependency can be found
    Integrity: Unknown
    OpenPMUNVRAMController:
    Version: 2.0
    Last Modified: 8/9/05 6:08 PM
    Location: /System/Library/Extensions/OpenPMUNVRAMController.kext
    kext Version: 2.0
    Load Address: 0x63a000
    Valid: Yes
    Authentic: Yes
    Dependencies: Incomplete
    Dependency Errors:
    com.macsales.iokit.OpenOldWorldNVRAM: No valid version of this dependency can be found
    Integrity: Unknown
    GossamerDeviceTreeUpdater:
    Version: 3.0
    Last Modified: 8/9/05 6:07 PM
    Location: /System/Library/Extensions/GossamerDeviceTreeUpdater.kext
    kext Version: 3.0
    Load Address: 0x63d000
    Valid: Yes
    Authentic: Yes
    Dependencies: Incomplete
    Dependency Errors:
    com.macsales.iokit.OpenPMUNVRAMController: No valid version of this dependency can be found
    Integrity: Unknown
    that is the list of extensions that are reporting some sort of errors. at first i was figuring it was a problem with the driver for the Pioneer drive but my friend brought over his digital audio G4 which was also running 10.4.8. and we decided to try the drive in his Mac to see if there was any problems. it mounted everything we threw in it. it played dvd's great and played audio cd's great, it copied files over to the hdd without fail. it even burned a flawless cd. ok now the ideal of the driver for the drive was thrown out the window. so it has to be something else causing the problem. either a driver for a part on the motherboard or what i have no clue.
    im just wondering what driver it would be causing a problem not allowing the Pioneer drive to work properly. cause its not the drive being bad cause it worked flawlessly in OS 9.2.2 and jaguar and in tiger in my friends digital audio G4
    im just wondering if anyone might know what could be done to fix this problem cause i know it can be fixed but i don't know where to begin or how. so i ask you how could i begin to fix this
    thank you all for baring with me and reading all this. i know i wrote allot but i had to explain what was going on before i could ask for help so you could better understand what was going on. i have already updated the firmware to the latest with no change the firmware use to be the old 1.11

    yea i have along time ago and also made a update to xlr8's drive database. cause i fixed the problems with the drive in OS 9.2.2 (AKA no burn support with the built in burning app or iTunes, now have full support for burning with the finder burn and iTunes thanks to a edited PioneerCDR authoring support extension that someone edited for me. found out that the Apple CD/DVD driver extension was at fault for the locking up on wake up with hdd sleep enabled that started when i installed the Pioneer drive. fixed with intech CD/DVD speedtools 6.0).
    When i did the first report on the drive database on xlr8yourmac i reported what problems i was having in OS 9.2.2 and i think i reported that i had no problems in jaguar, and was trying to obtain a driver or something to try to get it to work. but to no avail at first. after i fixed the problems i did a update report
    in jaguar the drive had no problems but no burn support. installed patchburn and the drive worked 100% in jag no problems what so ever. im thinking it has somthing to do with one or all of the extensions with errors but i can be wrong.
    i just wonder where ryan has been on the forums in OWC's site. cause i would like to submit my crash log panic log and the extensions with errors so he could help track down the problems to see if it cant be fixed. but ive tried emailing him but no replay's. and his last reply on the OWC forums was back in desember 2005 a few day's over a year
    i know it isnt the drive cause it worked flawlessly in tiger 10.4.8 on my friends Digital Audio but i know why it worked fine cause it has the proper files for the DA to work cause its a supported system. i would like to try to help to get xpostfacto to work better on the Beige G3 system
    in tiger if it is something to do with xpostfacto

Maybe you are looking for