Flash Flip Clock Timer

Hi all,
I am looking to develop a flip clock timer to place on a
company website to show when some software will be made available
(basically a release count down timer). I have seen a similar style
of what I am looking to do
here.
Although the one I want to create should count down not display the
time.
The reason for my post is I have no idea where to start and
was hoping someone could point me in the right direction to a
tutorial or provide a small sample fla.
Kind regards
David.

that's going to require some advanced scripting and i don't
know of any tutorials. i made something similar with numbers
flipping like an old-time scoreboard.
you'll need to tween the _yscale and _y property of the
number lower halves to give the appearance of flipping
numbers.

Similar Messages

Flip clock effect in InDesign?

Hi all,
I'm trying to achieve a flip clock effect in InDesign and export it as a SWF file. I've looked through all the options in the Animation palette and there isn't one that come close. Any suggestions?
Cheers,
Trish
========
Mac 10.6.8
InDesign 7.0.4

Hi Steve and Silkrooster,
Thanks for your reply. I should have been clearer about what the flip clock effect was! It's exactly what Silkrooster has described. I believe it's also been used at airports for the flight timetables, before LEDs were used. According to Wikipedia, it's called a split-flap display (http://en.wikipedia.org/wiki/Split-flap_display)
Unfortunately, I don't have a copy of Flash Professional 5 at work. I'll ask around and see if anyone's got a copy of it.
What I was hoping to do was to integrate it into the existing artwork and exporting it all straight from InDesign. Any suggestions/advice/recommendations would be greatly appreciated!
Cheers,
Trish

Flip Clock Counter Effect?

I have seen Apple use an effect in their keynote presentations where they have a retro looking flip clock counting up whatever stats they happen to be talking about at the time. For example, they use an animated counter that looks like one of these clocks:
http://www.ilounge.com/images/uploads/photo-flip-clock-1.jpg
Has anyone seen this effect and do you know how to reproduce it?

It's not a Keynote effect, and I'm not sure what app they used to do this. I was thinking maybe it was built into some other software and created as a QuickTime movie, but I can't find the other app that would have created it.

Hi, I would like to know, why is it that my iPhone's flash lights every time I recieve a notification??? is there any option to turn it off?

Hi, im from Colombia And: I would like to know, why is it that my iPhone's flash lights every time I recieve a notification??? is there any option to turn it off?
(iPhone 4s)
Or is it a hardware problem?
Thanks for your help!

Settings/general/accessibility - turn off "LED Flash for Alerts".
Then go read the manual - http://support.apple.com/manuals/

Digital Clock Time is not display present time

Dear all i have one doubt, i want to confirm please chek my clock time is not display properly what is the problem with this coding
http://www.newtonclients.com/clock/TEST2.html
Please help

Dear all i have one doubt, i want to confirm please chek my clock time is not display properly what is the problem with this coding
http://www.newtonclients.com/clock/TEST2.html
Please help

How do i make a clock/timer that can be reset to zero?

I need to make this clock/timer to run my control off of. To be more detailed I need to ouput a steadily increasing voltage slowly over a period of time. I have my DAQ assist set up to output a voltage to my device but i can't figure out how to make the timer/clock correctly.

It seems you simply want to update the ramp at a constant dt, why would you need to reset anything?
There are two main ways to do this:
software timed: use a loop with a given delay and write single points to the output.
hardware timed: setup timing for your task and send the entire ramp to the hardware. It will do the rest. No extra code needed.
LabVIEW Champion . Do more with less code and in less time .

Flip clock effect with a text

Hi, I have a little problem.
I really like "flip clock effect" (you can see it in this video at the end with words "Your Gateway To The World Of Creativity"). Can you, please, help me? How can I make this effect in Adobe After Effects CS6?
Tank you everyone!

Well, it says that the project file is available for download... Otehrwise this is as simple as animating the rotation of a 3D layer...
Mylenium

ESS Timesheet error with Clock Times

Hi everyone,
Has anyone seen this issue? (ERP 6.0, EP 7):
Timesheet data entry profile is configured 'With Clock Times' and WITHOUT 'Release on Saving'. On the daily view of the timesheet, when clock times are entered and Refresh or Review is depressed, the number of hours is populated and the following error displays:
"Number of hours not valid when Start Time and End Time are entered"
This only displays:
- when the profile is configured without 'Release on Saving' checked. When it IS checked, the error goes away.
- from the daily view (no clock times on the Weekly View)
- in the portal timesheet, not via CAT2 in ECC
Any suggestions?
Thanks!
Message was edited by:
Frederic Wood

<u>Without checking 'Release on saving':</u> The system checks the number of hours value with the corresponding hours mentioned in IT0007.
<u>On checking 'Release on saving':</u> It overwrites the number of hours stored in IT0007 in the back end system.
This happens because this option has dependency with 'With Clock times' option. For this option, the system automatically deducts unpaid breaks, as determined in the employees's work schedule, when calculating the number of hours.
If this helps, pl do reward.
Thanks
Narasimha

About +ive Time Mgmt with Clock Time .

Hi SAP-HR Experts .
Plz give me idea about +ive Time Mgmt with Clock Time.
I maintained , Infotype 50 , (created from 01.04.2007)
When i tried to maintained Infotype 2011 . (from 01.04.2007) record is not created , it gives
warning (date is with in selection period) when i press Enter Key over it , No record is created in infotype 2011 .
I sat feature TMSTA = 1 .
In infotype 7 , i maintained Time Mgmt status = 1 .
I want to know what Time Evaluation Report (RPTIME00) will give to me ?
How do i confirm my self that now SAP-HR is running on +ive Time Mgmt with Clock Time.?
Please guide me ...
Regards : Rajneesh (9873607039)
Edited by: Rajneesh Kumar on Nov 18, 2008 6:02 AM

Hi Rajneesh,
When you run time evaluation through PT60 schema TM00 you will get the following:
1. Clock in and Clock out entry
All recorded time data documenting the actual attendance times or the actual absence times of employees.
Actual time has the opposite meaning of planned working time.
Example:
According to the work schedule, an employee is supposed to work from 8:00 a.m. to 5:00 p.m. on December 3, 1999 (planned working time). The actual time data (actual times) from this day is shown below:
8:00 a.m. to 2:30 p.m. Attendance
2:00 p.m. to 5:00 p.m. Absence - doctor's appointment
2. SKELETON TIME
skeleton time is a time account in which payment-related times of an employee are managed.
Skeleton time is determined in time evaluation.
Example:
Skeleton time in the standard SAP System consists of:
u2022     Attendance, absence, and off-site work within a contractual period (start and end of working time)
u2022     Overtime hours that exceed approved overtime
u2022     Paid break times
3. FLEXTIME
Working time pattern in which employees can individually determine their own start and end times, as long as a certain number of hours is worked within a defined period of time each day.
*4. FILL TIME
A specific period of working time described in time evaluation that lies within the contractual start and end of working time (excluding breaks).
If an employee works a flextime schedule and is also expected to be at work at certain times (core times), then fill time indicates the difference between the start and end of working time (without breaks) and the core times
5. PRODUCTIVE TIME
The usable working time for a resource. The system determines the productive time using the working time data and utilization rate for the resource as follows:
Productive time = (End of working time - start of working time - break
duration) x Rate of utilization / 100%.
You estimate the downtime at the resource using the utilization rate.
And the results of the following will depend on your settings...
Time evaluation will update the quotas and it will form time balances
I hope this information is enough to understand...for more clarifications revert to me..
Regards,
KPJ

Problem on Oracle11g2 RAC -- PRVF-5424 : Clock time offset check failed

I have a lot of file core wrrote every 6 hour and the same time of alert"node".log file show error about PRVF-5424 : Clock time offset check failed.
Yesterday I use this:
[root@hostname2 ~]# service ntpd stop
[root@hostname2 ~]# ntpdate
[root@hostname2 ~]# service ntpd start
in order to resolve but today the problem re-begin?
2013-04-17 20:23:06.063
CRS-10051:CVU found following errors with Clusterware setup : PRVF-5424 : Clock time offset check failed
PRVF-5413 : Node "" has a time offset of 69695.6 that is beyond permissible limit of 1000.0 from NTP Time Server "******"
PRVF-5413 : Node "" has a time offset of 69940.6 that is beyond permissible limit of 1000.0 from NTP Time Server "**
2013-04-18 02:23:08.973
CRS-10051:CVU found following errors with Clusterware setup : PRVF-5424 : Clock time offset check failed
PRVF-5413 : Node "" has a time offset of -1826.9 that is beyond permissible limit of 1000.0 from NTP Time Server "1***
PRVF-5413 : Node "" has a time offset of -1364.2 that is beyond permissible limit of 1000.0 from NTP Time Server "1**
2013-04-18 08:23:16.093
CRS-10051:CVU found following errors with Clusterware setup : PRVF-5424 : Clock time offset check failed
PRVF-5413 : Node "" has a time offset of -2698.5 that is beyond permissible limit of 1000.0 from NTP Time Server "1***
PRVF-5413 : Node "" has a time offset of -1998.7 that is beyond permissible limit of 1000.0 from NTP Time Server "1***

What is your OS name and version ?
In general you can solve these issues by configuring NTP service running on your cluster nodes to be synchronized with other NTP servers. For example on Linux please read "Oracle RAC and NTP" in http://www.oracle-base.com/articles/linux/linux-ntp-configuration.php#oracle-rac-and-ntp.
Edited by: P. Forstmann on 18 avr. 2013 13:35

Report governor? (CPU time, clock time, # rows, etc?)

Is there any sort of report "governor" function available in the
Reports Server or 9iAS (Portal) interface to the reports server
that would let me stop a report once it had used up a certain
amount of database CPU time or simply ran for too long ("wall
clock time")?
For certain times of the night (during data loads, etc.), I need
to be able to restrict some or all of our users from taking over
the CPU by running too many reports concurrently, reports with
too broad a set of parameters, etc. The SRW.SET_MAXROW
procedure might help a bit, but ideally I'd like to be able to
control this without having to change each report. (Also, I'd
like to be able to control this on a user-by-user, group-by-
group or time-of-day basis.)
TIA for any suggestions anyone can offer!
- Bill

hello,
there is no feature in oracle reports but you might look into
the database features, they might have something like that.
regards,
the oracle reports team --pw

I have an iphone 3gs, when I try to connect to my home wi-fi the phone goes thru the motions, finds the network but can't lock it in. The check mark next to the network flashes a few times then the phone goes serching again and the same thing happens.

I have an Iphone 3gs wi-fi problem. When I try to access my home wi-fi network the phone looks for the network, finds it, but cannot lock it in. The check mark flashes a few times then the phone tries again to connect. This only happens with my home wi-fi. Any suggestions on how to fix this problem. I have re-booted the phone and the router without any luck.

SOLUTION!
I've been suffering from this problem for a few months. I tried everything suggested by everyone, and then, today, I had a mad idea.
I used to work in a room in the house that's about 12 metres away from the router. It's on the next storey up and horizontally about 8 metres away. The problem started when I began to work in the same room as the router.
Today I became so frustrated that for some reason I walked into a room about 8 metres away on the same level - Guess what? I connected with no problem at all. Feeling full of joy I walked back to the room where the router is located - Dropped internet connection within a few minutes! Walked back to the the room that's 8 metres away and, hey presto! I have a connection. I now realise that the problem was that I moved too close to the router.
I can think of no logical explanation for my experience, but empirically it seems to work. Does anyone have the faintest idea of why this should be the case? In the absence of an answer I think I may have to start believing in fairies at the bottom of the garden - I'm just off to set a meal for them.
By the way, I don't know if it has any significance, but the router is a BT Infinity router that has replaced the incredibly unreliable Virgin Media cable connection

I have installed Flash Player 5 times. It keeps disappearing, or won't load when I'm running MSIE8.0

I am running Windows XP, MSIE 8.0. I have installed Flash Player 5 times. It keeps disappearing, or won't even install over Internet Explorer. It stops halfway, and tells me to close Internet Explorer because it can't install with it running. I did that yesterday, and it installed when I started IE again, so I thought the problem was solved. Then, today, I logged on and tried to use Flash Player. It was not installed. I re-installed it, and came to the same block. It will not install while Internet Explorer is running.

Download the correct 32-bit or 64-bit uninstaller and installer and exit I.E.8.
http://forums.adobe.com/message/3952360#3952360
Run the uninstaller.
Reboot.
Run the installer.

Flip clock widget for symbian belle FP2

Hi,
I tired install flip clock widget in symbian but I get error message: Can not install! Built-in components.
What's the problem?

Restart your device , then open the maps - Open Weather from Menu - Then add the widget ( don't close map & Weather until the widget shows the data ) Or , Try to download another application from Nokia Store , You definitely find more suitable apps than the inbuilt weather system,
Send From My Nokia 700

Flash bombs every time I copy an image

I have a problem.
I want to go inside a movie clip and play with the animation.
But when I select the contents of frame 1 and hit "copy", Flash
bombs every time!
What's going on?

What version of flash? What platform? What are the contents
you are copying? Vectors? Bitmap? Did
you try reinstalling? Not a common issue I am afraid - never
hear of this so it may be something
with your system.
Chris Georgenes
Animator
http://www.mudbubble.com
http://www.keyframer.com
Adobe Community Expert
*\^^/*
(OO)
<---->
FlashMonkey666 wrote:
> I have a problem.
> I want to go inside a movie clip and play with the
animation. But when I select the contents of frame 1 and hit
"copy", Flash bombs every time!
> What's going on?

Flash Flip Clock Timer

Similar Messages

Maybe you are looking for