Flash Fullscreen Size Problem

So, call me ridiculous, but I use 64 bit software whenever possible because I have a 64 bit OS with 64 bit CPU cores. Naturally, then, I use a 64 bit web browser: Firefox (nightly). This means I need a 64 bit version of flash which is still in a horrible beta flux: http://labs.adobe.com/technologies/flas … 10/square/
The problem: the Fullscreen functionality of flash opens a new window (good) but with the video not actually full... screen (bad). Pictures are more descriptive:
I've been seeing this problem for a little while though, and wanted to know if it's happening to anybody else -- especially if they've found a solution.
And yes, I watch videos about lettuce.
Last edited by secretrobotron (2011-06-01 00:57:25)

Ooooooh. Looks like it's some third-party problem. Everyone must be using the same video player library for streaming.
Ignore this. It's a much wider problem.

Similar Messages

Flash stage size problem

Am using Flash Pro CS5 and although the documentation for Flash Player 10 at the link below
http://helpx.adobe.com/flash-player/kb/size-limits-swf-bitmap-files.html
says that the max is 4050 by 4050.
We are trying to run a swf in a monitor array of 3840 by 4320 but in the editing of the document properties the limit is only 2880 by 2880.
Has this been fixed in FLash CS6?
Does anyone have any advice?
We are stumped.

Originally were using FP11.2 and then tried FP11.1 and went back to FP11.2 but couldn't load the swf at full stage with either. We can load a 1920 by 2160 stage but it doesn't look to be the right size - but were able to load the swf with the smaller stage size.(That is a separate issue though - the non-exactness of the stage dimensions.)
We are attempting to output to a two by four monitor array aiming for a 3840 (1920 x 2) by 4320 (1080 x 4) and the large stage size should be possible according to the specs but no go.

My SWF is not the same size as my Flash document size

My SWF is not the same size as my Flash document size. How can I get it to be the same.
Thanks

I spent a little time trying to figure out if there's some setting anywhere that might explain this, but couldn't find anything. That doesn't mean there isn't any--I just don't know of any.
I'm wondering if you could take a screen shot that shows the stage size versus the swf size when it plays? It will help to make sure the problem is what I think you have it explained it to be.
Does this happen in all files you create or is it occuring just in one particular file? What version of Flash are you using? If you can make your file available maybe someone can see if the problem remains when they open it--possibly even track down some cause. I am unable to open CS4 files (don't have it), but if it's an earlier version I can take a look.
If you are using CS4, have you updated it to the latest release (10.0.2, I believe)? There were numerous bugs when CS4 was released, though I don't know if this would be one of them.

Stage has wrong fullScreen sizes when launched in adl

Actually this problem only occurs when these two properties are set in the descriptor file:
<aspectRatio>landscape</aspectRatio>
<autoOrients>false</autoOrients>
As aspected the stage has the following correct properties:
stage.autoOrients –> false
stage.deviceOrientation –> rotatedLeft
But the values for the fullScreen size values are (iPad screen size):
stage.fullScreenHeight –> 1024
stage.fullScreenWidth –> 768
So although the deviceOrientation is set to a landscape aspect ratio, the values for fullScreenWidth and fullScreenHeight do not reflect this. The odd thing is that this does not apply when the same application is launched on the device – in this case iPad3 (normal resolution). Then the values are correct:
stage.fullScreenHeight –> 768
stage.fullScreenWidth –> 1024
When I launch adl I set the following two properties:
-profile extendedMobileDevice -screensize iPad
It seems that although the descriptor file sets the aspect ratio to landscape adl sets the stage values initially to the default/normal aspect ratio in portrait orientation. It gets really weird when I set the screen sizes explicitly like this:
-profile extendedMobileDevice -screensize 1024x768:1024x768
Then window adl launches is in portrait orientation but the fullScreen sizes are correct! I did a very quick search online but could find anything regarding this issue. Is it known? Does a bug report already exist?
I should add that I'm running on OS X 10.7.4 with the latest Air SDK added to the latest Flex SDK (Flex 4.6.0.23201B, Air 3.3). I haven't tested other Air versions and neither did I run any tests on a PC.

Hi Chris,
just opened a bug: https://bugbase.adobe.com/index.cfm?event=bug&id=3225490
Thanks,
David

Flash fullscreen not working properly

When I click the fullscreen button on flash video players (YouTube, vimeo, etc), most of the time it fullscreens for a split second and then exits fullscreen. I have to spam the button really fast and get lucky for the fullscreen mode to "stick." Any ideas?
I've had this problem for a while now, any help is appreciated!

I have the same problem. The first flash fullscreen works, in a firefox or chromium session. Then, if I try again to watch a flash video in fullscreen, it goes fullscreen for a second then the webpage is back with the video freezing. The videoplayback is continuing in another layer, I can hear the sound. If I click on the top of the window, the video continue embedded.
If have extra/flashplugin
and
the content of /etc/adobe/mms.cfg
# Adobe player settings
AVHardwareDisable = 0
FullScreenDisable = 0
LocalFileReadDisable = 1
FileDownloadDisable = 1
FileUploadDisable = 1
LocalStorageLimit = 1
ThirdPartyStorage = 1
AssetCacheSize = 10
AutoUpdateDisable = 1
LegacyDomainMatching = 0
LocalFileLegacyAction = 0
AllowUserLocalTrust = 0
# DisableSockets = 1
OverrideGPUValidation = 1
EnableLinuxHWVideoDecode=1
I try many parameter combinations without success.

Flash Player sound problems on a 5.1 system

I don't know if i found the right topic for asking for this question, but here it goes.
I noticed that flash player has this issue with my 5.1 system, when i play music (and i mean any music, like my online radio, played through flash, or music through the site VK.com), the sound is extremely awful. Words actually can't explain it, there is no bass, and the sound, overall, seems to be of very low quality. But it's not. When the same music is played via stereo system (any), it seems to be perfect - with bass and etc.
Now i'm really confused. It's either a problem of flash, or a problem of somewhat in my system. My guess is that flash simply does not support audio output rather than 2.0. I will be really grateful if anyone will at least point me in the direction of the source of this problem; it makes my life miserable. Thank you.

Is it possible to have e version of flash player like silverlight which give thepossibility to hear audio on whole 5.1 system?
I have the following system computer:
Case: Thermaltake Mozart; PSU: Thermaltake Toughpower 750W; MainBoard: Asrock 4coredual-sata2; Heatsink: ZeroTherm Zen120; CPU: Core2 Extreme X6800 3,2Ghz; RAM: OCZ Platinum DDR400, 2x1 GB; GPU: Sapphire HD3850 AGP; PPU: BFG Ageia; HDD1: WD Caviar Blue WD5000AAKS; HDD2: WD WD2000BB; Monitor: Asus VB175T 17" 5:4; Audio System: danneggiato, in corso di sostituzione; OS: Xp Professional Sp3; Browser: Srware Iron.

Help: Flash 9 - Video problem - OS X

OS X 10.4.8
I installed Flash 9 today, since then no more Google video.
Browser crashes each time. Also with other sites that use Google
video. Tried uninstall, and install Flash 8: same problem. Cannot
get back to previous situation where everything worked fine.
Also problem with msnbc, no video, claims plugin missing.
Youtube works fine.

Hi,
folder deleted, after reinstall only the two flash files in
the folder. Same problem.
Worse, now Google Finance also hangs up. Spinning wheel of
death, requires force quit. BTW, this is the same for Firefox,
Safari, and Camino.
If there is no solution, how can I get back to my previous
system. The problem started when the Charlie Rose website required
me to update flash. Before the update everything worked like a
charm. Now problems everywhere.

HP 8750 Paper-Size Problem where it keeps telling me the paper is too big (it's set up for 11x17)

I've got an HP 8750 printer running with a Windows 7 Ultimate machine, and I've got a paper-size problem where it keeps telling me the paper is too big. It's set up for 11 x 17.
The actual wording on the printer is:
Paper installed is larger than needed. Press cancel to replace with correct size, if you wish to save paper, or press check mark to continue.
When you press the check mark it feeds the paper, but for a multi page-document I have to press the check mark for each page to feed.
How do I get it to print 11 x 17 paper without having to press the check mark for each page?

''guigs2 [[#answer-672422|said]]''
<blockquote>
NoScript stops cookies, please disable this addon/extension as well as make sure that the language en-us is installed.
# 1) Open up the Firefox Preferences tab. You can do this by typing about:preferences in the URL bar.
# 2) Click "Content"
# 3) Next to "Languages", click "Choose"
# 4) Select "English/United States [en-us]", click "Add"
# 5) re-open "about:accounts"
# 6) Click "Get Started"
</blockquote>
Thank you for replying. Unfortunately, I already did all of these things. As you can see from the below screenshot, the language is already set. Also, this screenshot was taken in Safe Mode, so NoScript is not enabled. About:accounts still says I need to enable cookies for some reason. So, this solution didn't work....

Please Help!!!!!dynamically changing a flash movies size...

Hi i'm working on my final year dissertation and have become
intensely stressed out/frustrated & almost mental in achieving
this particular aim!!!!
what i need to know is how to
dynamically change a flash movies document size in real time,
without squashing or stretching the content,much like the banner
adds frequently seen on hotmail by companies such as orange,lexus
etc.. where the flash movies size expands on interaction
Help on this will be greatly greatly appreciated!!
Thank you.

RE: "P.S. I found it aggravating that I couldn't copy and paste text here, it wanted me to insert as a link or an image, how do you insert plain text?"
I take it you tried using the "right click" menu? That doesn't seem to work, as you noted, but, you should be able to paste text by pressing your CTRL key and while holding it down, press the "V" letter key.
CTRL + C = COPY
CTRL + X = CUT
CTRL + V = PASTE
HTH,
Ortho_Fan

Is there a solution to Rapidweaver Stacks Cache size problems?

Is there a solution to Rapidweaver Stacks Cache size problems?
My website http://www.optiekvanderlinden.be , has about 100 pages and is about 250MB in size. Every time I open RapidWeaver with the Stacks-plugin, the user/library/cache/com.yourhead.YHStacksKit folder grows to several Gigabytes in size. If I don't manually empty the com.yourhead.YHStacksKit Cache daily, AND empty the Trash before i turn off my mac, my Mac still has problems and stalls at startup the next day. Sometimes up to 5 minutes and more before he really boots. If i have a been working on such a large site for a few weeks without deleting that cache, than my iMac doesn't start up anymore, and the only thing left to do is completely reinstall the iOs operating system. This problem doesn't happen the days i use all my other programs but don't use Rapidweaver.
Does anyone know a solution and / or what is the cause of this?

once more,
i just launched my project in Rapidweaver, and WITHOUT making any changes to my pages, the cache/com.yourhead.YHStacksKit folder filled itself with 132 folders (total 84Mb), most of them containing images of specific pages etc. The largest folder in the cache is the one with the images of a page containing a catalogue of my company, this folder is 7Mb. It seems by just starting up a project, immediately different folders are created containing most of the images in my project, and some folders with a log.txt file. Still i don't see the reason why it is filling op a huge Cache even without making changes to the project. I have 2 different sites, so 2 different projects, and i get this with both of them.

Can't log into Adobe Story on windows 7 after installing flash player10. no problems w/win98 @work.

Can't log into Adobe Story on windows 7 after installing flash player10. no problems w/win98 @work.

I downloaded Adobe air and the desktop app for story and can get online from that. Thanks anyway. T

Director MX 2004 + Flash MX 2004 - Problema con formulario flash con combos dentro de director

Buenas,
He desarrollado una aplicacion con base Director, que lleva
dentro un
formulario flash con varios combos tirando del componente
combobox del
mismo. Hasta ahora lo habia usado en otras aplicaciones con
una integracion
similar sin problemas, pero en este caso me ha surgido algo
realmente
extra�o, esto es, si pulso muchas veces en los combos
hay momentos en los
que estos se vuelven locos y se quedan como colgados (de
hecho la aplicacion
esta como colgada cuando pasa esto). Esto pasa mas a menudo
en windows 2000
por no decir la mayoria de las veces, y en XP pasa en
determinadas
circunstancias. He probado a quitar el direct to stage del
sprite flash,
ademas de quitarle la "animacion" que realiza al desplegarse,
y creo que en
xp el problema esta resuelto, pero en win 2000 me parece que
estamos en las
mismas.
El problema es que necesito combos para ese formulario, y no
me valen los
que trae Director por defecto, basicamente por el aspecto.
Tampoco puedo
permitirme el lujo de cambiar todo el formulario a Director
aunque usara un
xtra o un behavior, ya que esto lo entrego ma�ana y
tengo que matizar mas
cosas. Alguien ha hecho algo parecido, o ha tenido un
problema similar?
Muchas gracias y saludos a tod@s

Buen dia, el problema que tienes radica en la version de xtra
que
utiliza director para mostrar la info que hasta el momento
esta en la
version 7, lo que debes hacer es exportar los ficheros a una
version 7y funcionaran perfectamente.
"Tony" <[email protected]> escribi� en el
mensaje
news:e85ovc$s0j$[email protected]..
> Buenas,
>
> tengo una aplicaci�n hecha en Director MX que
necesita abrir ficheros
> flash. El problema radica que si estan hecho con la
versi�n 8 no me los
> abre. Alguien sabe por qu�? en PC tengo instalado
la �ltima versi�n del
> Flash player.
>
> Salu2 y gracias de antemano.
>
>

Will Macbook Air(2012) with 256G storage flash have storage problem

Will Macbook Air (2012) with 256G storage flash have storage problem described in "MacBook Air Flash Storage Drive Replacement Program"?
In the web page http://www.apple.com/support/macbookair-flashdrive/, it says that Apple has determined that certain 64GB and 128GB flash storage drives used in the previous generation of MacBook Air systems may fail. I wonder whether Macbook Air with 256GB flash storage may come into the same problem?

Welcome to Apple Support Communities
No. 256 GB flash storage does not have that problem. However, it's important that you make backups of your data to keep your files safe

My mobile form of my homepage have some size problems!

Hello! My mobile form of my homepage have some size problems. All pages gets right size exept one. It only cover halv of the page. What is wrong?

Hello,
Can you please share the URl of the page with us so that we can get a better idea of the issue.
Usually this happens when any object is placed outside the browser are in Phone layout.
Regards
Vivek

Size problem with Email sent from SAP

Hi everyone,
All our layouts today were developed with sap script
We started to send them by mail, using the standard way.
in the process they are converted to PDF format from OTF, because of this activity the size of the mail that I am getting is 1 Mega where as the source is only 300K (approximately).
We are already flagged the option of compressing.
As we see now we don't have any option to make the email to be smaller.
Is someone already encountered this problem? What option do I have? (Except of developing the layout again in Adobe)
Thanks allot
Udi
SD consultant

First thanks
Sayali Paradkar , we used in the past this function module, but it was even worse.
We started to use the standard process of sending mail.
As we understand the program of converting OTF format to PDF cause the size problem.
And its define to send PDF out of the SAP, also we are using SAP definitions to compress all files :nSE38 -> RSTXPDF3 -> option FLATE_COMPR_OFF = OFF
But still the mails are very big,
Thanks again
Udi Marom

Flash Fullscreen Size Problem

Similar Messages

Maybe you are looking for