Flatfile loading from Local Workstation
Hello,
I am training BW, and i have this Proccess Chain simulating some data, acquired from a Infopackage that pulls data from a Flatfile.
In the first execution i couldn't pull the data because it said
"An upload from the client workstation in the background is not possible"
I came here and basicly read that this is impossible to do. Nevertheless i got a bit further and discovered this option on the Tabs Menu of the Proccess Chain
"Execution -> Execute Synchronously" and the PC starts running in the background and my Flatfile infopackage get the data and i am able to populate the Target with that data!
My question is, what is this Execute Synchronously proccess doing and what, if some, effects or problems it may arise?
Thanks
Edited by: John Oliveira on Feb 11, 2009 1:54 PM
Hi
Synchronous Processing
A request is processed synchronously in a dialog process -- for example when it is started in debug mode from DTP maintenance. The debugger settings allow you to enable automatic synchronization after each control method. In debugging mode, the system then executes a flush call after each control call. If a runtime error occurs, the call is displayed that caused the error.
You cannot Load Flat file from Local Work station untill and unless it is assigned at AL11 and you have proper Authorizations for the same.
Hope it helps and clear
Similar Messages
-
A null object loaded from local variable 'o' in XSLT mapping
Hi experts,
We are facing an issue in XSLT mapping for one of the inbound scenario.
While executing the source message at mapping level, it is failing with the error text - "javax.xml.transform.TransformerException: com.sap.engine.lib.xsl.xpath.XPathException: Error parsing query -> java.lang.NullPointerException: while trying to invoke the method java.lang.Object.toString() of a null object loaded from local variable 'o'
Kindly help us on this issue!
FYI - We are facing this issue in PO 7.4 version.
Best Regards,
Uday.HI Hareesh,
Thanks for your inputs...
We are migrating the interface from PI7.1 to PI 7.4 at this one we are getting the error as mentioned the earlier. we are uanle to run it in the mapping level as well.
Why are we getting the error?As this is working in PI7.1 version
Please help us on this. -
Hi,
Our PI is getting data from WebSphere MQ and pushing to SAP. So our sender CC is JMS and receiver is Proxy. Our PI version is 7.31.
Our connectivity between the MQ is success but getting the following error while trying to read the payload.
Text: TxManagerFilter received an error:
[EXCEPTION]
java.lang.NullPointerException: while trying to invoke the method java.lang.String.length() of an object loaded from local variable 'payload'
at com.sap.aii.adapter.jms.core.channel.filter.ConvertJmsMessageToBinaryFilter.filter(ConvertJmsMessageToBinaryFilter.java:73)
at com.sap.aii.adapter.jms.core.channel.filter.MessageFilterContextImpl.callNext(MessageFilterContextImpl.java:204)
at com.sap.aii.adapter.jms.core.channel.filter.InboundDuplicateCheckFilter.filter(InboundDuplicateCheckFilter.java:348)
at com.sap.aii.adapter.jms.core.channel.filter.MessageFilterContextImpl.callNext(MessageFilterContextImpl.java:204)
I have searched SDN but couldn't fix it. Please provide your suggestion.
With Regards
Amarnath MHi Amarnath,
Where exactly you are getting this error?
If you are getting at JMS Sender communication channel, try to stop and start the JMS communication channel and see the status, also use XPI Inspector to get the exact error log.
for reference follow below blogs:
Michal's PI tips: ActiveMQ - JMS - topics with SAP PI 7.3
Michal's PI tips: XPI inspector - help OSS and yourself
XPI Inspector -
Hi everyone,
I just installed SP09 and i was testing the solution. And I found a problem with the approvals tasks.
I configured a simple ROLE approval task for validate add event. And when the runtime executes the task, the dispatcher log shows a error:
ERROR: Evaluation of approvalid failed with Exception: while trying to invoke the method java.lang.String.length() of an object loaded from local variable 'aValue'
And the notifications configured on approval task does not start either.
The approval goes to the ToDO tab of the approver, but when approved, also the ROLE stays in "Pending" State.
I downgraded the Runtime components to SP08 to test, and the approvals tasks works correctly.
Has anyone passed trough this situation in SP09?
I think there is an issue with the runtime components delivered with this initial package of SP09.
Suggestions?Hi Kelvin,2016081
The issue is caused by a program error in the Dispatcher component. A fix will be provided in Identity Management SP9 Patch 2 for the Runtime component. I expect the patch will be delivered within a week or two.
For more info about the issue and the patch please refer to SAPNote 2016081.
@Michael Penn - I might be able to assist if you provide the ticket number
Cheers,
Kristiyan
IdM Development -
GetDescriptions() of an object loaded from local variable 'itemDeploymentResult'
Hi
We are urgrading our SAP MII ( purely Java ) systems from 7.31 Sp5 to 7.40 and we got stuck at Configuration phase. We are getting the following error during Queue validation.
Checking of deployment queue completed with error. java.lang.NullPointerException: while trying to invoke the method com.sap.sdt.j2ee.tools.deploymentmgr.DeploymentManagerItemResultIF.getDescriptions() of an object loaded from local
variable 'itemDeploymentResult'.
I looked in the trace files under SUM/sdt/trc directory and found the following information.
Jul 3, 2014 9:52:16 AM
[Error]:
com.sap.sdt.executor.module.ModuleExecutor [Thread[UC-3,5,main]]: A
problem has occurred:
com.sap.sdt.executor.exception.StepExecutionException: Problem while
trying to execute operation on service validate-queue. The following
problem has occurred java.lang.reflect.InvocationTargetException. CSN
Component BC-UPG-TLS-TLJ.
Checking of deployment queue completed with error.
java.lang.NullPointerException: while trying to invoke the method
com.sap.sdt.j2ee.tools.deploymentmgr.DeploymentManagerItemResultIF.getDescriptions() of an object loaded from local
variable 'itemDeploymentResult'
Jul 3, 2014 9:52:16 AM
[Error]:
com.sap.sdt.executor.module.ModuleExecutor [Thread[UC-3,5,main]]:
Checking of deployment queue completed with error.
Jul 3, 2014 9:52:16 AM
[Error]:
com.sap.sdt.executor.module.ModuleExecutor [Thread[UC-3,5,main]]:
java.lang.NullPointerException: while trying to invoke the method
com.sap.sdt.j2ee.tools.deploymentmgr.DeploymentManagerItemResultIF.getDescriptions() of an object loaded from local
variable 'itemDeploymentResult'
We have 26 GB left on our Drive and have also upgraded JSPM to 7.31 Sp8. We are using SUM10SP05_9.
Appreciate your quick helpHi Amarnath,
Where exactly you are getting this error?
If you are getting at JMS Sender communication channel, try to stop and start the JMS communication channel and see the status, also use XPI Inspector to get the exact error log.
for reference follow below blogs:
Michal's PI tips: ActiveMQ - JMS - topics with SAP PI 7.3
Michal's PI tips: XPI inspector - help OSS and yourself
XPI Inspector -
IE load is OK, Problem with Firefox...tries to load from local drive
My own website, in Firefox, opens fine when it is the Home (index.php) page OR a link from my homepage to a third party website. BUT, links from the home page to my other pages do not bring up images, possibly do not use the css (not sure), and try to load from the local drive. IE works with no problem whatsoever.
I think it may be a problem with the .htaccess file, as deleting/renaming the file makes it worse in both Firefox & IE. Also, the function that is causing the problem is the Apache .htaccess function Mod_rewrite...which can redirect browsers, regardless of what is written in an html or php web page file.
Turning off the redirect function in .htaccess is worse for Firefox, but (I believe) not for IE. This rewrite function is available with recent versions of Apached, but not older ones.
Any help would be appreciated. This is starting to get really "old".Solved this:
Turns out that we now require at least "List" permissions for "Everyone" for the root of the partition where the User profiles reside.
This was not the case on our previous images.
Hopes this helps someone else. -
Loading from local but not remote HELP??
Hi
I've created a flash "app" that works 100% on my local server but not on a remote one, I'm connecting to a MySQL server using flash VIA php.
Weird part is the fact that I can delete and add to the database but it doesn't want to read from the server and populate a datagrid???
If I test the php file it gives the correct output in IE and the flash file is in the same directory(and domain obviously) it just doens't read\load it?
Any help would be MUCH appreciated!!!
Link to php and flash files:
http://portable-shade.vacau.com/PSIO/Hello,
This forum is actually for the Adobe Digital Rights Management (DRM) product "Flash Access". Your question likely belongs in the Flash Player forum @ http://forums.adobe.com/community/webplayers/flash_player
cheers,
/Eric. -
Hi Gurus,
We are using BOBI 4.1 and we have created a webI report and while refreshing the report, we are facing the below error first time. After we close the error message and if we refresh again, its working fine. I have found one note (1724168 - Hierarchy error when refreshing a Web Intelligence document) stated that its a bug in 4.0 and its resolved in 4.1. But still am facing the same error in 4.1. Kindly help me to resolve the issue. Anyone input is highly appreciated.
Thanking you in anticipation.
Obinna.Dear Henry,
Please find my inputs below.
What SP are you on? --------- BOBI 4.1 SP2
what does your webi query look like - are you selecting a full hierarchy ? ------- No
are you filtering your dataset at runtime using input variables / parameters? -------Yes. We have used formula variable at BW level and I have hard cored its value at BO side in different queries (same report) by giving different value for each query.
Is your APS / DSL_Bridge properly up-sized on the BIPlatform? what's the Xmx value in the command line? --------- Xmx4G
Does your administrator monitor anything unusual in the BW SM66/ST05/ST22 ? -------- Everything is working fine in BW system side.
How high mem usage seen task manager / PIDs on the BIPlatform? -------- Everything is normal (Total RAM Size 24 GB) -
Getting null object loaded from local variable error while trying to drag any field
Hi,
I am getting the below error while I am trying to drag any field in webi reports. Error message is attached below.
Can anyone help me on this. Webi is based on two different universe.
Thanks
SnehasishThanks Sathish for the reply.
BO Version is 4.0
reporting database is oracle 11.2.0.3.0
I am getting this error when I am trying to drag any field(dimension, measure, variable everything) in the report.
Universe has been created on top of Bex query. Now the webi is built on top of universe.
Thanks
Snehasish -
Hi,
I installed BI platform SBOP BI PLAT 4.1 and was able to log in to CMC and BI Launchpad. Post this, I installed SBOP DATA SERVICES 4.2 SP01 PATCH 3 WINDOWS 64B and am getting the above error while trying to open CMC and BI Launchpad.
Please helpThanks Jawahar, re deploying web apps helped.
-
Error in data load from application server
Well, this problem again!
In datasource for dataload by flatfile, tab Extraction i selected Load Text-Type File From Application Server.
In tab Proposal:
Converter: Separated with Separator (for Example, CSV).
No. of Data Records: 9198
Data load sucefull.
I add 1 record:
Converter: Separated with Separator (for Example, CSV).
No. of Data Records: 9199
So appear a message error "Cannot convert character sets for one or more characters".
I look in line 9199 in file and not have any special character. I use AL11 and debug to see this line.
When i load file from local workstation, this error not occur.
What's happen?Hi Rodrigo,
What type of logical file path have yopu created in the application server for loading this file.
Is it a UNIX file path or an ASCII file path.
Did you check how the file looks in the application server AL11?
Prathish -
Photos not loading from server
Hi experts,
The photos of all employees is put in server.Its loaded to the form using READ_IMAGE_FILE.The code is given
DECLARE
tiff_image_dir varchar2(80):='\\192.168.0.11\photo\';
photo_filename varchar2(80);
begin
:System.Message_Level := '25';
photo_filename := tiff_image_dir||:hr_employee.emp_id||'.BMP';
READ_IMAGE_FILE(photo_filename, 'BMP', 'HR_EMPLOYEE.PHOTO');
end;
IP address of server is mentionedThis code is not working.
The photos will be loading from local machine.
Pls help
ReenaDear Reena,
In your run window (Start -> Run) type the same path (\\192.168.0.11\photo\) and check whether it is opening. If yes, then try opening the open dialog in forms itself and select the particular path and check whether it is opening or not - use the GET_FILE_NAME built in for opening the open dialog box. Also tell me in which platform (O/S) you have installed the Application Server. (If you installed in Unix related platform then you must use '/' instead of '\')
Regards,
Senthil .A. Perumal. -
How to select variable filename from local directory with fn to load xml
I would like to select a specific xml file to load from a local directory. The file name is composed of “Title” + “number sequence”. I know the Title (in this case its XLink07), but I need to select the latest number sequence or the latest by date stamp.
For example, the local directory has the following files:
XLink01[36735298100].xml
XLink02[36735298100].xml
XLink02[36735298101].xml
XLink07[36735298100].xml
XLink07[36735298101].xml
In this example I need to select file XLink07[XXXXXXXXXXX].xml where XXXXXXXXXXX is the highest number within the XLink07[XXXXXXXXXXX].xml files. Title is Xlink07 and function should return Number sequence [36735298101]. Files with higher number sequence have later date stamps than files with lower number sequences. I need to select the highest number or the latest date stamp for the file that begins with XLink07….
My action script to load the local .xml file without any function to select the correct file is:
Security.allowDomain("*", "*")
var xmlLoader:URLLoader = new URLLoader();
xmlLoader.load(new URLRequest("XLink07[36735298101].xml"));
xmlLoader.addEventListener(Event.COMPLETE, showXML);
function showXML(e:Event):void {
XML.ignoreWhitespace = true;
var Innards:XML = new XML(e.target.data);
tweet_name.text = Innards.XLink01[0].screen_name;
tweet_1.text = Innards.XLink01[0].text;
tweet_date.text = Innards.XLink01[0].created_at;
Thanks for the help if anyone can script that function for me if its possible.If you develop for Flash browser plugin (not AIR), there is no way to read directories.
-
Xcode: loading HTML5 questions from local storage
Version: Captivate 6
Output type: HTML5 loaded as local files within an Xcode iOS project.
Not sure at this point if the problem is with Xcode or the Captivate files.
The requirement is to load 'offline' local Captivate quizzes within an iOS application. The HTML5 output from Captivate loads absolutely fine when stored on a web server and viewed through the browser (Safari) on the iPhone. The puzzling bit is when I load the files into an Xcode project and view them through a UIWebView locally the Captivate content does load properly, although it does load a grey placeholder style box in a HTML page - the content does not initiate. See screen grab.
I am conscious the Captivate HTML5 output contains a lot of javascript files and have made sure these are included in the Copy Bundle Resources rather than the Compile Sources.
I made a simple local HTML page and the content in this renders absolutely fine in application, using the UIWebView also to view the content on a webserver within the app works fine.
Any suggestions?I'd suggest using Safari and set the UserAgent to be an iphone and see if there is anything in the error console. That might give you a clue.
Fergal -
Some time ago, while doing a bunch of things at once, FF asked me a question...not sure what it was as I was distracted by other things...I answered "yes" and since then my own website's subpages attempt to load from my C drive. This is not a problem with the homepage itself and it does not occur with other browsers. Driving me crazy and no one seems to know what is the problem...only with FireFox
http://www.questfundingservices.us is the home page which opens fine on any browser. But, in FF, any of my sub-pages attempts to open from the local drive. I believe this happens for other viewers of the site, but I am not 100% sure of that.
I never intentionally entered a <BASE local in the html and I don't think there is one, but you can check the source yourself.
This was never a problem until one day, while doing 50 things at once, I went to my website and FF popped up a question...Don't remember what it was and, in my haste I just said "yes", I think...and this problem has occurred ever since!!!
Maybe you are looking for
-
Error while importing text file to Power Pivot via Table Import Wizard
Hello there, I'm a rookie at handling Excel to be honest. I've been trying to import a .txt file to Excel (it contains around 14 million rows of information) but Excel won't let me since it can only handle around 1 million rows per sheet (too trouble
-
ColdFusion Server Settings box is blank
I finally got my copy of CFBuilder 2, and I've been trying to get it set up for my projects. When editing code, I have a "Firefox" and "IE" tab at the bottom of the editor window, but when I click on either one (or if I click on the green "Run" butt
-
Unexpected error. server getting restarted
Hi All, i am using oracle app server which supports JEE 1.3. When i deploy my application and run for few minutes itself my server getting restarted and i am getting the following error in my log. Unexpected Signal : 11 occurred at PC=0x55A38B2D Func
-
Please help with the error message. |There is more if you need it.
-
Hi, I have a program where i have designed the selection screen. This program is used by different programs. My requirement now is i have to add a new field and disable another field if the new field has any value and viceversa. I cannot go and direc