FM Budget Update when reducing Purchase Orders versus Release Strategy

Hi,
We noticed that whenever we reduce the amount of a Purchase Order, the budget is immediately returned to the budget independently of its release status. The budget should only be returned once the changes have been accepted (i.e. at the end of the release strategy).
How can this be achieved? Do I need to make changes to the customisation or are there Badi's and/or user-exits that can be used to change the behaviour?
Many thanks in advance.
Regards,
Guy

Hello Guy,
The budget keeps beeing consumed even though the purchase requisition has been rejected.
The commitment item will only be reduced if you set the deletion indicator.
This means that the budget is not returned just by rejecting the purchase requisition.
Regarding the point that the budget was consumed even if the po was not released, I kindly ask you to check the following information:
According to note 597854, the SAP internal BAdI 'ME_COMMTMNT_PO_RELEV' is defined in a manner allowing you to decide whether the order updates the commitments of the purchase order or not, corresponding to the header data of the purchase order.
The following exceptions are valid in this case:
o Purchase orders that already have a purchase order history or
o Purchase orders, that were actively saved (not held) and already
released, or are not subject to release,
I suggest you to check the BAdIs 'ME_COMMTMNT_PO_RELEV' and 'ME_COMMTMNT_PO_REL_C' and their documentation.
Also, please review attached note 942582 - BAdI ME_COMMTMNT_PO_REL_C
I hope this information will help you to solve this incidence.
Best Regards,
Vanessa Barth.

Similar Messages

Deleted purchase order with release strategy

Hi all,
When PO are deleted, the release strategy is disabled. However, if you mark final invoice and delivery completed indicators, the release strategy is triggered, even if the po is deleted.
Is it possible to disable the release strategy when final invoice and delivery completed indicator are marked?
Thank you for your answer

The technical expert in my team has found the explanation to that problem:
A deleted item is "statistical" => there is no release strategy (standard control in ME_REL_STRATEGIE_EKKO function module)
But if ''final invoice'' and ''delivery completion'' are marked, the item is NOT statistical (standard control in LMEPOF4X include)
Therefore, a release strategy is redetermined even if the item is deleted
Thank you all for having tried to help

Print Preview Purchase Order with release strategy

Hi gurus,
With release stratregy you can not print a PO before release through ME9F. The system will give error message 'No corrosponding document found'. However, you can print PO through 'Print Preview' by clicking on Print icon in ME22N, we need that "Print Preview"doesn't print PO without release. System it shouldn't print.
Thank you!

Hi,
Hope you are using Z output type & print program for PO printing. You can restrict this by modification in program. Please do it with help of abaper.
Regards,
Sandeep

Suppress PO output in case a PO is updated by a purchase order response

Experts,
we are in SRM 5.0. We are trying to suppress any PO output when a PO is updated by purchase order response. We are experimenting with PO output start conditions (Customizing). No succes until now. We tried to check whether the object status table has status 'Variance in PO response' (I1352). No effect.
Does anybody have a clue or even better, an example, how to achieve this without the use of BADI's or defining any customer fields?
Apparantly when a purchase order is updated via the purchase order response the BBP_DOC_CHANGE_BADI is not triggered, or at least we were not able to debug it, so it looks like this is no option either.
Any suggestions?
Thanks for your help, Maurice de Feijter

Hello Jay, thanks for your suggestion. We are currently implementing SP 14 to 17 in which the note you mentioned is included. Unfortunately PO output is still not suppressed automatically when a PO response is accepted and copied to the PO, even if no content is changed (price, quantity, delivery date ....) .
That is the reason why we were looking for the possibility to use start conditions in customizing. The main problem there it that we do not know how to recognize that a PO change is triggered by the PO response, and how to configure that in a condition. SAP docu does not give any clue.
So, any other suggestion is welcome

Error when posting Purchase Orders

Hello,
Client gets the followin error for a particular item when doing purchase order : -
No matching records found 'withholding tax' (OWHT)
The error does not appear when purchase order is done from the server directly, but appears on SAP clients.
What could be causing this error ?

hello Martin,
is this error occur in only one particular BP or it occurs in all BP?
if this error only occurs in one BP
1. goto the BP master data - Accounting Tab - Tax sub-tab
2. Check the tick box "Subject to withholding tax"
3. WT Code allowed - clikc the button in the right side "This will open WT Code allowed window" set default one of the existing WT code available.
4. Update BP Master Data.
hope this helps...
Fidel

INFO UPDATE in the purchase order ( ME21N)

Why the field INFO UPDATE in the purchase order ( ME21N) is not flaged when I create a purchase order?
I create a PO, and I flag it in ME21N, but it cancel it? WHY
I have already tried it in spro Default values for purchasing, and all seem good!!
Anybody could tell how can I tick this field?
Thanks a lot
Kari

Hi
Info update indictor can be set by defualt if you maintain the same in the Purchase inforecord,
If no inforecord exists then this would not be flagged and if you flag it then the Purchase inforecord gets created with the update of with or wothout plant based on the default value assigned to the buyers.
Thanks & Regards
Kishore

SAP VB script for updating texts in purchase orders

Hello,
I am trying to create a SAP script for updating texts in purchase orders. It is in the last third - Item Detail, Texts tab.
The script is ok apart from the fact that it always deletes whatever text is in there and than add a new one.
I would like to keep history in the texts tab and always just add one line to existing texts. Is there any way (command) how
to keep existing texts and only add a new line to the top?
Thanks a lot!
Jan

Yes, you are exactly right. I have already figured it out as well. I did not expect it would be that easy. But thanks a lot anyway for replying on this!
Now I am struggeling with changing SAPLMEGUI in vb scripts for ME22n. Sometimes, there is SAPLMEGUI:0010 and sometimes SAPLMEGUI:0015. Even when the users have the same screens in the beginning the SAPLMEGUI number differs. They also do one item by hand and than it changes. It keeps changing between SAPLMEGUI:0010 and SAPLMEGUI:0015
Is there a way how to have the same number of SAPLMEGUI or how to eliminate this issue?
Thanks a lot
Jan

Error -5002, Update quantities in purchase order? (INV1.Quantity) Line[2]

We are trying to create Invoices using the SDK tool for a clients interface. Everything goes ok, except at the point where we add the document, we get the following message:
Error -5002, Update quantities in purchase order? (INV1.Quantity) Line[2]
Any ideas? We have searched the SAP notes, but nothing is available. Are we missing anything?
We are running on Version 6.50.098
Thanks
Marios

Hello Marios,
This error occurs because the last line you are trying to add to the Marketing Document is an empty line. It is a new functionality in Version 6.5 that the document object automatically comes with one document line so if you are adding just one line you do not need to use oDocument.Lines.Add,
It is only for the second and subsequent lines of marketing documents that you require the method oDocument.Lines.Add. Note 722693 describes the issue.
Regards,
Lisa

Workflow issue when create Purchase Order automaticlly based on Sales Order

dear experts,
I got a problem when create purchase order automatically once the Sales Order created, the field ERNAE of the Purchase Order creatd is WF-BATCH, but we want this field to be the user log in the system, like John. Smith
it seems this is a configuration issue, but i am not familar with workflow, do you experts have any solutions?
thank you in advance.
Hongtao

thank you for you reply my friend.
yes, i mean the PO creator.
I just create a SO in VA01, then change the Schedule line category from CN to CP, then SAVE, then Confirm the Delivery Proposal. after all this, the PO will be created automatically by Workflow. Because when I display the PO via ME23N, it displays [Standard PO XXXXX created by Workflow-System] on the top of the screen.
But i do not know which workflow is trigered to create the PO. and i tried SWEL like you said, there is no record listed.
do you have any other suggestions? thank you so much, friend.

Budget control for automatic Purchase orders

Hi All,
We are facing problem in budget availability check for automatically generated Purchase orders through MRP run.
We are able to control the budget check for manual Purchase orders but how can we control budgets for automatically generated Purchase orders.
we are using IM budgeting for orders.
Please let me know your valuable inputs for the above issue.
Thanks in advance.
Regards
Nagesh

Hi,
You have to run FM_MRP_PR transaction in order to transfer MRP documents to FM for budget control.
Regards,
Eli

Error when Approving Purchase order

Dear all,
we are using oracle applications version 12.0.4, I am facing an issue when a Purchase order is approved , the approver is getting a notification
" Unable to reserve funds" and purchase order is going to pre-approved status. I tried to check funds from purchase order form but Its showing me a message
"The header currently does not have distributions eligible for this action"
Edited by: user13295191 on 02-Nov-2011 05:12

A quick hack would be to try this functionality from the old form (instead of the OA page) just to know the error.
Thanks,
Vinod

Printing purchase order 'in release' !

Hello,
we need to add a second printing document for purchase order. I think it's possible with a new message. But i've read that message works only if the purchase order is not 'in realease'.
Is it possible to print purchase order document when the purchase is 'in release' ?
Thank's

hi,
AS per my knowledge it shd be possible after full release only...because then only it make sense of the printing and sending to the vendor...
If it would be possible before or within release only, and if the changes are made in between while the release by any officer, then it'll not get reflected....
Regards
Priyanka.P

Report to view pending Purchase Order for Release

Hi,
Is there any sap standard report through which we can view pending Purchase Order for Release.
Regards,

Hi,
you can use transaction ME28, this can give information of pending purchase order for release on release level.
but this transaction is used for releasing the collective release for purchase order. this is not an report.
if you want transaction for reporting purpose only, you need to create a report or query on EKKO table. based on release indicator.
vikas,

BLANKET PURCHASE ORDER WITH RELEASE

HOW TO DO CONVERSION OF BLANKET PURCHASE ORDER WITH RELEASE
,PLZ SEND SAMPLE CODE OR UNIT TEST(UT) DOCUMENT.

Hi Suresh
you can define the copying rules with the help of following customization.
SPRO>Purchasing > Purchase Requisitions > Text for Purchase requisitions > define copying rules.
define text types and linkages.
SPRO>Purchasing>purchase order>Text for purchase order
Define copying rules for header and item text for PO as per the requirement.
Best Regards
Nishant Shende

Purchase order re-release

Dear All,
my client wish , purchase order should not go for re-release if buyer changes/ amends delivery date in ME22N
Thanks

Hi,
Just complementing, customizing path:
T-code OLME
> Purchasing
>> Purchase Order (Assumimg that you are dealing with release strategy in PO)
>>> Release Procedure for Purchase Orders
>>>> Define Release Procedure for Purchase Orders
>>>>> Release indicator
You can also refer following document:
-> http://wiki.sdn.sap.com/wiki/display/ERPSCM/RELEASE+PROCEDURE
Hope it helps!
Cheers,
Eduardo Junior

FM Budget Update when reducing Purchase Orders versus Release Strategy

Similar Messages

Maybe you are looking for