Folder and Image Notes

It would be useful to be able to enter memos for images and folders and to view these under an image in an expanded grid view. This could be used for describing a retouch plan, project info, etc and would not be part of the exported metadata.

Very odd; 2 Encore CS4 Mac users with finishing BD build issues today!
There was an update for CS4 that fixed a number of bugs. It updated 4.0.0 to 4.0.1. I do not see your symptom listed, but these seemed significant.
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4078
Here is a thread that reports a possible way to fix this issue.
Re: on Blu-Ray build, Export File Not Found, referencing the timeline

Similar Messages

I have deleted my private folder and do not have enough space to reinstall my operating system. How can i transfer files from my hard drive to an USB drive to free up space when the operating system isn't working. or do i need to erase disk?

i have deleted my private folder and do not have enough space to reinstall my operating system. How can i transfer files from my hard drive to an USB drive to free up space when the operating system isn't working. or do i need to erase disk through disk utilities without erasing data (but will it delete my programs such as photoshop, office, creative suite?

Connect the computer to another Mac and put it in FireWire Target Disk mode, or use the Disk Utility to clone the drive or image specific folders with the USB drive as the target. After you've copied off everything you want, you'll likely need to erase the drive and reinstall the applications.
(69695)

After updating to Mountain Lion, Mail has lost the RSS feeds, the colored marked mails folder, and the notes

After updating to Mountain Lion, Mail has lost the RSS feeds, the colored marked mails folder, and the notes. Where are they?

why did they erase something usefull and easy to use?

LR4 opens as lr2 and images not found

LR4 opens as lr2 and images not found, can anyone help me please, I'm hopeless.
LR4 just uploaded as upgrade.

Thanks dj, what happens is when I click on the LR4 shortcut LR4 window starts to open, flashes momentarily as LR4 then buggers off before fully opening my old LR2.
I have removed the LR4 installed yesterday, and reinstalled, but same problem. Also the installation process now seems to never stop cycling. It goes through the full installion cycle, then starts/repeats again. I have followed the prompts and run through it 3 times before giving up.
Any more clues on what I have done wrong, or now need t do please.

Launch daemon's, I have deleted the files in the folder and can not log in to recover the files , safe book didn't help can you ?

Launch daemon's, I have deleted the files in the folder and can not log in to recover the files , safe book didn't help can you ?

- Can you use Target Disk Mode : How to use and troubleshoot FireWire target disk mode to assist to recover the files.
- Need another Mac and a Firewire cable
Cheers

Folder redirection configured in GPO does not create Documents folder and does not redirect

Hi
Another Folder Redirect-post - sorry for that, but I could not find an answer for my problem so far: even with consulting many threads here...
We have an existing environment under Windows XP and want to move away from that. Now I ran into troubles with folder redirection...
The following folder- and permission structure exists so far:
\\<server>\<Users$-share>: This is the base folder for all users-directories
-> Permissions: SYSTEM: Full / Administrators: Full / Users: Read&Execute, only this folder
-> Share-permissions: Authenticated users: Full control
\\<server>\<Users$-share>\<username>: base folder for the specific user
-> Permissions: SYSTEM: Full / Administrators: Full / User: Change, all permissions inherited onwards
-> Giving only change permission prevent further problems with self-called "advanced users"... ;-)
\\<server>\<Users$-share>\<username>\profil.V2: Profile directory of the user
-> Of course here the permissions are set by the system: override the predefined permission
\\<server>\<Users$-share>\<username>\daten: Atcual Home directory of the user
\\<server>\<Users$-share>\<username>\daten\Documents: Suposed Documents directory of the user
Now I am going to Server 2012 and Windows 8.1, configured the GPO to redirect Documents folder into the above mentioned:
GPO - User configuration - Policies - Windows settings - Folder Redirection - Documents:
Setting: Standart - redirects all folders to the same path
Destination folder: Copy to base directory of the user
I apply policy to the user, log out and in - it doesn't work, no folder Documents created in my home-folder, Folder Documents still configured at C:\Users\<user>\Documents
A very special point:
I also do Redirection of the My Pictures-folder: Define it to follow the Documents folder. Funnily that one works and creates and configures \\<server>\<Users$-share>\<username>\daten\Pictures
-> So in my eyes, it should work!
Then: I want to do the folder redirection without Offline Files, due to the fact, that our users work with dynamically assigned virtual desktops, which are been cleaned everytime a user logs off a machine. Therefore synchronizing doesn't make sense...
I just cannot see, why this redirection does not work :-(
Thank you very much for any help!
Kind regards
David

Hi David,
Before going further, would you please let me confirm the OS version of the Windows Server which you used to
configure folder redirection? Based on your description, did you mean that those users (who will be applied folder redirection settings) logged on Windows XP client computer?
When you configure the folder redirection setting in Document Properties (path:
User Configuration-> Policies-> Windows Settings-> Folder Redirection-> Documents), please check if you checked “Also apply redirection policy to Windows 2000, Windows 2000 Server, Windows XP, and Windows Server 2003 operating system” in Settings
tab. As below picture shows.
à
GPO - User configuration - Policies - Windows settings - Folder Redirection - Documents:
à•Setting: Standart
- redirects all folders to the same path
à•Destination
folder: Copy to base directory of the user
Would you please provide a screenshot of those settings you describe? Meanwhile, please summarily describe
that how you configure. For example, where this GPO link to? Or any other. It will help me to understand clearly. Thanks for your understanding.
In addition, please use
gpresult command to check if the folder redirection group policy was really applied.
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

Mac Book Pro has blinking folder and will not start.

MY Mac Book Pro mid 2010 has the blinking folder and is froze, I have entered into the Internet recovery mode and tried to reinstall OSX system. And in the Disk Utility there is no hard drive to select. What is the next step?

Question (?) Mark, Blinking Folder, or Gray Screen at Startup
These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
A flashing question mark appears when you start your Mac
Mac OS X- Gray screen appears during startup
In most cases the problems may be caused by one or more of these:
a. Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
b. Boot drive's directory has been corrupted - Repair with Disk Utility.
c. Critical system files are damaged or deleted - Reinstall OS X.
d. The disk drive is physically non-functional - Replace the hard drive.
Note that the information I have provided is what Apple recommends, If other users suggest different solutions than found here, then be sure what they recommend does not impact on your warranty, if any, or ability to get continuing Apple service.
Please don't start removing drives or changing cables unless you know what you are doing and have exhausted other non-invasive alternatives outlined here. If you perform any work yourself that is unapproved by Apple, then you will void any warranty you may have and lose all further Apple Support.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD. Simply boot from the Recovery HD to perform the above.
Reinstall Snow Leopard Without Erasing The drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing The Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Certificates problems and images not loading

i did a fresh install of the firefox v24 on my windows 7 ultimate 64bit desktop. after installation im getting certificate security issues for almost all websites even for the firstrun page. I cannot install any websites from addon wesite because firefox says this "services.addons.mozilla.org uses an invalid security certificate." and im not able add exceptions.
If i open Facebook, only the html part is loading. No CSS or images. Please help me wtih this issue

The issue isn't resolved.... i tried doing a clean install... created number of new profiles using profilemanager.... but its the same....im attaching some screenshots of how facebook is opening in a clean install and new profile

Text and images not displaying, but some are

I've uploaded my site, and images and text are missing. 4 pages are great, but the individual property pages are half empty (missing images, icons and text) Its a school project, so, yikes! www.icm-mp3.net/group17/
thank you in advance

I should clarify, it all worked fine on my own server. Now, on the schools site, its missing photos going across horizontally, the lightbox that goes with, a text box, an image embedded with links. The remaining elements are in their places. Could this be a server issue?
And, clever me, it is due tomorrow.

Css and images not working on 3rd party server

Hello,
I have read the previous posts on this subject, but found no resolution.
I can confirm that the CSS and images were uploaded to Media Temple.
The permissions are set to "read"
I didn't change any of the file structures. uploaded as it was output by Muse.
Any new thoughts?
Thanks a bunch.
-keith.

I'm back.
Okay Zak thanks...
what browser?
on Safari the html shows up but no styling and the image frames show up but empty.
On fox same thing except no image boxes even.
I have a support request in with MT so I will see what they have to say.
Thanks a bunch and I promise to update any info I gather from them.
-Keith.

Google search and images not working since last night on my macbook air and iPad, how to fix?

Google search and images stopped working last night on my macbook air and the ipad. Any idea why or how to fix?

Restart the router.
Restart the computer.
Restart the iPad.
Best.

Folders and images not in alphabetical order

hello.
any idea why all of a sudden all my images and folders are not in alphabetical order.
everytime you re-name or add a file to photoshop it detects and goes in order.
now ive got to search to see where that file is.
thanks.
phil.

I suddenly started having the same problem. Have you resolved the issue yet? I will attempt to add 2 screenshots of what is happening.
This is what my image folder looks like in Windows Explorer.
This what I see when I try to open a file in Photoshop.
I hope you can see that in Windows Explorer the files are sequential but in the Photoshop "open" dialogue box they are all mixed up.
I am using Photoshop CS5 on a Windows 7 machine. This is happening in both the x32 and x64 bit versions of Photoshop.
As the OP said, it makes it a real PITA when you are looking for a particular file.

Stroking and image not created in Illustrator

I have been a Photoshop hobbyist and enthusiast for years. Now I own a printing business to put my hobby to work. This has forced me into the world of Illustrator for our printing and cutting machines. Although I am very comfortable with PS, Illustrator is giving me fits. One of the key things is making "Cut lines" in Illustrator to send to the cutting program. Now here is my dillema, all of my images I have made are in Photoshop. To make these cut lines I have to stroke the image. When I bring a picture into Illustrator I can not get it to stroke that picture. It just strokes the box around it, or unless I draw a circle or shape around it and stroke that shape. Please refer to the picture I have attached. The first one is a decal that we initially made. The second is the image that I want to stroke for cut lines do I can just have that as a decal without the white circle. Any help would be appreciated.

Hello Dimitri try this.
Why not use the pen tool and draw a stroke around the image and make a clipping mask of the outline, like you would in Photoshop, then increase the outline to your requirements.
See rough example below, with outline.
TREX

Link and images not shown

Hello,
On Skype Version 7.7 (335), I cannot receive links or images, neither send files or images, while links are received correctly from the recipients (I cannot see them).
All the links are correctly parsed on any other platform (I tried on Windows 7, Android 5.1 and iOS 8 with the same account that is not receiving the links on Mac OS X).
Please see attached images for examples of what happens.
Any idea why this happens? :-S
Thanks!

Hey guys! I am wondering if this is related I just found a temp fix. You wont be able to see the images but you'll be back to functional old school. While in Skype on your top mac menu bar go to "View", then click off "Show Images in Chat". You'll see the link and skype wont try (and fail) to show you the image.
Image attached:

I am not being allowed access to my Music folder and am not able to open itunes.

when i try to access iTunes, i get a message that the Music folder cannot be found. When i attempt to open the Music folder, i am told that i do not have access permission. i recently had my hard drive replaced and did a restore from Time Machine. Any ideas?

In the Finder, select your Music folder. Hit Command+I which will open "Get Info". Where it says "Sharing & Permissions" it should read :
yourname Read and Write
everyone No Access

Folder and Image Notes

Similar Messages

Maybe you are looking for