FOOTER IS NOT MOVING AS I ADJUST PAGE HEIGHT
I MEAN THE FOOTER NOT MOVING CORRESPONDING TO A NEW CHANGE IN HEIGHT.IF I CHANGE THE HEIGHT THE FOOTER STILL STAYS IN MIDDLE.IT IS NOT MOVING AUTOMATICALLY AS I SAW IN THE TUTORIAL.PLEASE HELP.
Hello DATHU1983,
Are you referring to the section "Design the Visit page?" If so, can you tell me what time in the video you start having problems? Is it at the beginning of the video when the presenter goes into the Page Properties and adjusts the height of the page?
Thank you for any additional detail. Also, I want to confirm that you are using the Muse CC version and not a previous version of Muse?
Thank you,
Ed Sullivan
Similar Messages
-
Resource filter is not working on 'Timesheet Adjustment' page. in project server 2013
Environment : Project Server 2013
In Time-sheet approval page, Time sheet manager unable to filter the resource time-sheet.
In time-sheet adjustment page time-sheet manager unable to filter the data as per resource.
Please help to resolve the issue.Hi,
As far as I know, this feature which exists since at least PS2007 was never reported as "buggy". Thus I think it is an issue due to which user filters on which timesheets, meaning a visibility setting. It is really hard to debug for you since I
do not know exactly the steps you went through and your configuration. I would start by testing simple scenarios in a dev environment using delegation sessions to check from the timesheet manager point of view what he can see. It is also important to check
the timesheet status.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller | -
Header and Footer in not displaying correctly on each page in Adobe Forms
Hi experts,
I need your little help on Adobe Form. I have develop a customer account statement and facing problem.
In header and footer part I have to display customer address. It is ok if data is of one page. But when data is overflowing, customer address is showing only at first page in header, and not displaying address neither in header nor in footer(footer section will print on last page, it may be either first page or third page ) on other pages. (Address is table type data )
Header and footer Section address has been designed on Master Page.
Please help me to resolve these two problems as soon as possible.
Regards
PiyushI found this post which I hope helps:
This can be done by bit of tweaking using JavaScript.
Actually the problem was, the header was printing continuously in subsequent pages and once the header data was over the rest of the pages contained blank header. But we need have to print same header for each group of items till that group of items finish in the specific page. And for new group of items different header will be filled and so on.
So to overcome this issue, create the item table in such a way that the header data is also included in the item table for each group of items. In the layout, select your header field and the event READY LAYOUT and write the below JavaScript code. This event is called for each page for that header field, so you can directly map the item table value and put it in your header field.
// Get the current page
var currpage = xfa.layout.page(this);
// variable to store number of fields in that page.
var fields = 0;
// Get the number of fields
fields = xfa.layout.pageContent(currpage-1, "field", 0);
// Loop on each field on the page
for ( i=0; i<= fields.length-1; i++ )
// Check if the field is in the item table column (it will be actually header data column in your item table)
if ( fields.item(i).name == "TL" )
// Fetch that value and store in your header field.
this.rawValue = fields.item(i).rawValue; -
I have a website whose pages are pretty much the same height, however, I have 3 pages that are considerably longer than the others. It uses an accordion spry that has about 15 tabbed panels. When I expand some of the content areas of the spry panels, the lower panels extend below the footer. I want to change the page height of just those pages that use the accordion spry to make it larger.
You shouldn't be expressing height values on any containers with text in them. Height is determined by content and that varies by page and the text-size people use in their browsers. Explicit height values actually limit how much content your containers can hold which can be very bad for usability reasons. If you need to reveal a background image, use the min-height property instead of height.
Nancy O. -
Expanding text fields not moving next fields down the page
I have a multi-page form with several comment boxes that I want to be expandable (if needed). I've managed to get them to expand, but the fields following the field that is expanding dynamically are not bumping down the page. I've gone through and read about different things to try and use (flowed, western, expand to fit, etc), but the fields following the expanding fields are not moving.
I can send the form I am using to anyone who has a suggestion. I am confused with the hierarchy and where stuff needs to go in order to work correctly.
Thanks.Hi, it is highly recommended that you create subforms in your form. By creating parts in your form you should create subforms for each of those parts. For the textfield you are trying to make it expandable and flowable to the next page, you must make every of its parents flowed. Your main page is actually set to positioned, even if your subform containing the textfield is flowed, if each of its parents are set to flowed it should work, otherwise it will not flow to next page.
If you set your page to flowed, it will reposition each of your fields because it is not in subforms. Make sure to create subforms for each parts, putting all fields in subforms. If you set your main page to flowed without creating subforms, all of your fields will be redesigned to be aligned left with the hierarchy order.
Hope this help. -
Footer not staying at bottom of page
http://www.mrjindustrial.com.au/index_newicons.html
The footer is not sticking to the bottom of the page when viewed on a reasonable-sized monitor. There's a large space beneath it. I have not been able to work out exactly why this is happening, and hope someone here might know.
I have been using PVII CSS Layout Magic and have posted this question in their forums, no reply as yet, so I am hoping someone in this forum can help.
Thanks, PixelwarriorThe height of a page is determined by how much content it contains. Short pages don't stretch to fill the available viewport without code hacks which can lead to other problems.
If you want a fixed footer (always visible), try this:
http://alt-web.com/DEMOS/CSS2-Sticky-Footer.shtml
Nancy O. -
Footer not coming end of the page in BI Publisher
Hi All,
I am developing a report in which the footer output is not coming end of the page after the tabular output per group Completion.
There is a tabular group and free form group which output coming accourding to number of lines in tabular output but after the tabular output there is one
more group in the form of tabular which show the details sum of the first tabular output which i have to print each of the group end and end of that page but
when i am trying to get output it coming just after the first tabular output.
Please advice...
Regards,
Sushantyou have to use the word footer and header, and put these place-holders there
better send me the template and xml, { i guess.}i know what you are trying -
Component on page not moving as vertical scroll bar is moved
All -
I have a mxml page that is a mx:Application. This page basically consists of a VBox
and a number of components included within that VBox. All but 1 of the components
within this VBox are built-in flex components. The one component that is not a built-in
flex component is the one that is causing me issues. The issue is happening when I run
the application, once running the vertical scroll bar appears on the right-hand side of the
page (as expected because I have quite a few items in my VBox). The problem is that as
I drag the vertical scroll bar from the top of the page to the bottom of the page, the custom
component within my VBox that I built is staying put (it's not moving with respect of the
movement of the vertical scroll bar). All of the built-in flex components that are within my
VBox are moving with respect of the movemnet of the vertical scroll bar as expected.
I appreciate any information that you can provide that will lead me in the right direction,
Thank you,
Wes// THIS IS THE CUSTOM COMPONENT
-
It was pointed out that my links do not function correctly on Firefox on a Windows platform. When links are clicked, they do not fully display the NEW page until the mouse is moved! I have now observed it for myself on my fathers PC running Windows XP on Firefox.My PC is on Windows7
It is the 5 version of Firefox, so I know it is a current bug, and appears in no other browsers that I know of.Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
In Firefox 4+ you can use one of these to start in <u>[[Safe mode]]</u>:
* Help > Restart with Add-ons Disabled
* Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
Moving regions on a page not just items
Apparently you can arrange items/portlets within a region but cannot re-arrange regions within a page.
Given three regions: a,b,c is there any way to move region to the right of region [c]?
[ a ]
[b] [c]
Seems like only option is to split region [c] into [c] [d] then delete region [b] moving all its items to region [d] and manually copying all region properties of [b] onto [d]. If you have 3 regions on the right to move to the left then this becomes very time consuming and error prone if there are any custom forms or URLs within the portal that are referring to those region ids [e.g. hardcoded page/region ids].
Editing views: Graphic, Layout, List do have options to move/arrange items and split regions NOT moving a region.
When you end-up with multiple regions, some with tabs, it's not apparent how to add/move a region without re-creating the whole page.
Any help would be appreciated.
Thanks.
--jasonHi Jason
No real way to do this and save the region settings (maybe someone can prove me wrong). As you pointed out, you will need to create at least one new region, move the content into this region and update the region level settings. You should definitely avoid using hard coded URLs and instead use direct access URLs for linking to portal content. -
Can not adjust the page height in Muse. It is stuck at 2047px.
Can not adjust the page height in Muse. It is stuck at 2047px.
Hi Gaurav
I was never was able to adjust the page height. No matter what I tried it
would not work. I ended up starting over. Lost about 6 hours of work. Is
this a issue other users are having?
Do you have any articles related to this issue?
Regards
Joseph
dePinho Design
Creative Ideas | Intelligent Solutions for Print & Web
Joseph dePinho
Creative Director
Two Rodcris Drive
Mahopac, NY 10541
phone: 845-621-8546
email: [email protected]
http://www.depinhodesign.com/
Join my Facebook:
http://www.facebook.com/depinhodesign
google.com/+JosephDepinho -
The selecton tool on illustrator is not grouping or moving graphics around the page
When using the Selecton Tool on illustrator is not grouping or moving graphics around the page as per normal@
Try Cmd(Ctrl)-Shift-B which is the toggle for Show/Hide Bounding Box. Sounds like your problem.
-
Adjusting page numbering in the Table of Contents
I have a question regarding adjusting page numbering in the table of contents. I have manually adjusted my page numbering to start at page 3, which is now called page 1. But my table of contents still show this page as page 3, while I want it to be shown as page 1.
How do I do this?
I tried to find an answer somewhere on this forum, but I couldn't find one. Neither could I find a solution in the help file.
I hope you understand my question. I also included the document, which might be of help. Thank you!This answer assumes that your document uses the Default page style for physical pages 1-3. You are going to need two different page styles to accomplish what you want. (I'm guessing you have used a page number offset of -2 to get your physical page 3 numbered as 1 and this simply will not work in the TOC.)
Put your cursor in the Title page (physical page 1) and open the Stylist (F11). Click the Page icon (4th from left) then click the New Style From Selection icon (2nd from right). Give it a name like 'Body'. Before you close the Stylist double click on Default just to make sure you did not change the style of the 1st page.
While you are still on the 1st page click into the footer and remove the page number field assuming you do not want it.
Put you cursor in the FIRST (1st) paragraph of the 3rd page and do **Format > Paragraph > Text Flow tab. In the Breaks section, check the Enable box, if not already checked, then check the With Page Style box, select the Body style from the drop down menu and set the page number to 1.
If the page number field is still in the footer on this page then delete it and insert it again. It should now show 1.
Click into the TOC, right click and select Update Index/Table.
Just in case you have trouble translating this to your version of SO I have fixed your document and have attached it.
* *To change to a new page style while writing your document do Insert > Manual Break > Page Break and select the new style. If you want a new page number you can check that box and set the new number. -
Foot stand not provided with my replacement WRT-350N - need help with Cisco contact
Hi!
I am starting to feel like Michael Douglas in the movie Falling Down and need some help.
Story:
I finally sent in my faulty WRT-350N router and when I got the replacement everything but the plastic foot stand was included. I want to have my router standing up to save desk space but now I have no foot.
"OK, should not be hard to get Linksys to send me the missing foot stand" was my thought. Now I have called the RMA line and also emailed them and I get a similar answer like Michael Douglas got with a smile
I keep hearing that I cannot get the part since it is not on the product's content list. Like that is *my* problem. I just want the part and do not care whether it is on a list or not. It is the part on top of the router in the picture. I even asked the Linksys representative to Google a bit for WRT-350N and there are foot stands on almost all pictures and it is definitely included in the box. I was told I could go nowhere else for help either with this. I really doubt that but fail to find a channel to Linksys that may be able to help.
If some Linksys representative sees this please help me!
Thanks, Niklas
RMA XXXXX - missing router stand/foot
(Mod note: Edited for guideline compliance. E-mail conversation removed.)
Message Edited by kent07 on 07-01-2009 03:10 AM
Solved!
Go to Solution.Now it should be working. To moderators, this does not hold any personal info but just want to show the quite long text to read through for the RMA:
Thank you for contacting Linksys Customer Service Department. First of all, we would like to inform you that, if your item has been purchased less than 2 years ago, you have the possibility of replacing it through the place of purchase.
If you want to replace your item through Linksys, we are more than glad to provide you with our assistance. In order to create an RMA ( authorization number for the replacement under warranty), you can do it online at
https://linksysrma.moduslink.com/Consumer/pag/ChooseRegion.aspx.
On the other hand, if you prefer us placing the RMA, please reply to this email including the following information:
Name:
Last Name:
Company Name:
Street Address:
City:
Postal Code:
Day Time Phone Number:
Model (include version):
Serial Number:
Date of Purchase:
Place of Purchase (store):
Once the RMA is created, you will receive a confirmation e-mail with the RMA number on a shipping label ( not a prepaid, as the inbound shipping is up to the customer) and all the terms and conditions . You will have to print three copies of that label. The first copy you are going to stick it in the outside of the box, the second one you are going to join it in the inside of the box and the last one is a copy for you as assurance. Together with this e-mail it will also be included all the terms and conditions. We will strongly appreciate your reading them carefully before sending the item to us. In relation to this, it will be our pleasure to summarize some of the important conditions we state in order to clarify our standard procedure:
Please write down the RMA# ( not the case id#) on the outside of the box with big numbers and letters. Moreover, we recommend our customers to use a traceable shipping method in order to get a tracking number for the delivery. This number will be helpful to track the package in case of any potential inconvenience. Remember that you will have to pay just for the inbound shipping while Linksys will be responsible for the rest of the expenses.
Furthermore, remember to include all the accessories that were included in the original package: Power Supply, Cables, User Guide, CD's. Otherwise, warranty replacement will not be possible to be performed. All other accessories shipped that did not come in the original box may not be returned. Moreover, it is important to remember that you do not have to ship the original box. Also, include on the shipping box a copy of the proof of purchase, not the original.
IMPORTANT: -If your product is part of a network kit just send the defective unit.
If you have further questions do not hesitate to call us or replying to this e-mail. Our lines are open from Monday to Friday from 10 a.m. to 7 p.m. We recommend our customers to have the case id# handy.
Regards,
Linksys Customer Service - EMEA
Linksys does NOT offer refunds, substitutions, credits, or upgrades.
Linksys is NOT responsible for lost packages in transit. Please obtain a tracking number as a safeguard for your shipment. Linksys strongly suggests using a reputable shipping company that will provide a tracking number and will insure the package.
Linksys is not able to accommodate walk-in customers.
Processing the Defective Unit.
Package your return unit(s) in one box, please make sure the contents are secure and that enough packaging material is included to prevent the unit(s) from moving around during shipping.
Please ship the defective unit(s) to the address below.
Linksys RMA/SILS/ML
IJsseldijk 29 in Apeldoorn
7325 WZ Apeldoorn
The Netherlands
All original Linksys accessories, such as power adapters, couplers/dongles, and antennas MUST BE RETURNED with the product.
If you are replacing a product that belongs to a networking kit, only return the defective product listed on the previous web form belonging to the networking kit. Please do not include the working product.
Linksys is NOT responsible for lost packages in transit. Please obtain a tracking number as a safeguard for your shipment. Linksys strongly suggests using a reputable shipping company that will provide a tracking number and will insure the package.
Linksys is NOT responsible for lost or damaged personal accessories. If you have attached any accessories that did not come with the original product, please remove these items prior to returning your unit(s). In addition, if your product uses any internal fiber modules please also remove these items unless they are listed as one of the products on the RMA web form.
Linksys is not responsible for data stored on the hard drive of the defective unit. If the defective unit has a hard drive and it cannot easily be removed form the defective unit, backup your data prior to shipping the defective unit to Linksys.
The customer bears the cost of sending the defective unit(s) to Linksys including all customs fees and applicable taxes.
A COPY of the proof of purchase must be included for all products. A valid proof of purchase includes a copy of the receipt, invoice, or packing slip from the retailer, or distributor. A copy of your credit card statement, internal requisition, or purchase order is NOT considered a valid proof of purchase. DO NOT SEND YOUR ORIGINALS.
Processing the Replacement Unit.
Linksys bears the cost of shipping the replacement unit to the CUSTOMER unless the expedited shipping option is chosen at the time the RMA is created.
Upon receipt of the defective unit, a replacement unit is usually shipped within 3-5 business days
Linksys ships replacement products via GLS ground to customers within the European Union. Non European Union Customer's replacements are shipped FedEx.
In the event of a backorder, units will ship when available, and the shipping method will remain the same as the option selected at the time the RMA was created.
If you wish to change the shipping method, YOU MUST contact the Linksys Customer Service department prior to the replacement unit being shipped. Once the unit has been shipped, the funds paid for expedited shipping cannot be refunded. The Customer Service phone numbers are listed below.
Once you receive your replacement unit, test the unit, and verify that it is working properly.
Damaged or missing part(s) must be reported within five business days of receiving the replacement unit(s).
IMPORTANT: If your unit uses a power supply, make sure to use the power supply that comes with the replacement unit, and not the original power supply.
COUNTRY
PHONE NUMBER
Austria
01360 2772061
Belgium
02 627 7077
Czech Republic
800 800156
Denmark
82 332729
Finland
0800 523062
France
0800 881 026
Germany
0800 1013311
Hungary
06 80 204 548
Iceland
44 207 660 0121
Ireland
1 800 818 188
Italy
02 38 591012
Lithuania
44 207 660 0121
Luxembourg
32 2-627-7077
Malta
44 207 660 0121
Netherlands
0800 020 0101
Norway
235 00060
Poland
00800 331 1345
Portugal
213 180 081
Spain
900 902 207
Sweden
0851 992 251
Switzerland
022 5675 330
Turkey
212 444 2726
United Kingdom
0800 026 1418 -
Animated gif not moving, image.animation_mode already set to Normal
''dupe of - https://support.mozilla.org/en-US/questions/932846 - locking''
With image.animation_mode already set to Normal, animated gif are not moving, it seems only the first frame is downloaded. I tried downloading the image, it also seems that only the first frame is downloaded. Then I disabled all extensions, the problem persists. Then I use a whole new profile, there seems to be no problem.
The question is, is there another hidden settings in firefox which cause this trouble? I do not want to start a new profile just because of this. (It also happens in Firefox version 13)Do you see the animation if you check the image in Tools > Page Info > Media or open the image directly in a tab?
Some security software (firewall) can block animated images and send a normal image instead, so can try to check the advanced settings for Firefox in the firewall if the problem isn't in Firefox.
Maybe you are looking for
-
I have a small storage server and want to connect to it via Ethernet. I also want to connect the internet using a separate Wifi router from my provider. How can I do both?
-
Time is Displayed Wrong in Menu
Hi, Trying to set up my new MacPro and my first time using Leopard... Can't figure out how to make the Time shown in the Menu to match the Time I set in System Prefs! It's really weird. In Date & Time prefs, the time shown is: 5:45 and that's what is
-
how shall I configure my form to enable reader user to attach a file to such form???? thank you¡¡
-
Creating database on multi cpu machines
Hello: I want to issue the create database statements on a machine that has multiple cpu. Would like to to know what are the parameters if any need to specify in the ora file and anything specific needs to be done in the create database statement and
-
Installing EOS Utility (Mavericks)
I have a MacBook Pro and using Mavericks. When I upgraded to Mavericks, I noticed EOS Utility stopped working for remote shooting. I tried downloading the Mavericks update but it still wouldn't work. I tried deleting & reinstalling EOS Digital Soliti