For requirement strategy 30 forecast not seen in planning book

Hi Experts,
I am using planning strategy 50 in ECC and same has been transfered to APO as 30. Just to test scenario I have entered manually forecast in product view and created sales order in ECC which is CIFed to APO. Now as per SAP guide, scenario works fine in product view, where sales orders consumes forecast and shows remaining forcast after consumption.
But the remaining forecast and sales order is not seen in SNP planning book. Any suggestions?
Best regards,
Vaibhav

Dear Vaibhav,
I have a basic question ? Strategy group  50 in ECC  comes to APO as Requirement Strategy 30 ..
But it is a Make to Order strategy .
Do you think that it is logical to plan /Forecast a make to order product?
You can enter a forecast in product view , system will not stop you.
If you click on the item it will show as make to order planning segment.
So, I dont think that you can forecast .
whatever you see the product view cannot be seen in the planning book.
Regards,
Srinivas.S

Similar Messages

  • Actual and Forecast not visible from Planning App -- VERY CRITICAL ISSUE ,

    this is a very critical issue.. need immediate help..
    my customer cannot see the Actual and Forecast not visible from Planning App. please help me with the same. tell me the possible solns as i cudnt have a web confrerence with the custmer till now.
    thanks/

    John ,
    they are seeing the application in planning. they created a scenario dimension containing , budget, actual and forecast.. but in the planing application they can only see budget. the rest 2 are not visible.
    thanks..

  • DP - Sales and Demand Forecast values in the Planning book were increased.

    Dear DP Experts,
    The Sales and Demand Forecast values in the Planning book were increased.  Is there a way to tract who user could have made the changes?  Can we view the last change like in the document flows?
    Thanks,
    Glason

    hi Glason
    if the values have been changed by the user community, I am not sure if there is a way to find out. However if there is technical flaw in data processing, you can check for the steps as posted in the above post.
    We faced a similar issue in our project. We were not able to trace the user ids under which the values were changed. However since we retain the 15 days of back up, we were able to check that the values were changed on a certain date but not the user ids. but we were still able to restore the original values.
    As an additional step, we also developed macros to store (in the form of alerts) the exisitng value and the updated value incase the there was a manual change in the Sales forecast and other editable key figures.  This ensured that there was a check if there was a manul change. we also ensured that these macros were not executed during the background jobs.
    SAP also provides a standard SAP APO Change Monitor add-on which can be used to track chnages to the key figures. Please refer to note 1308968 for further information on the add on.
    let me know if this helps.
    Rgds, Sandeep

  • Function module to read/write notes in the planning book

    Hi All,
    Can you guyz tell me the FMs to read / write NOTES in the planning book. Notes as in you can right click on a cell of PB and do display notes.
    win full points for the answer.
    Thanks - Chandan

    Check FM /SAPAPO/MSDP_NOTE_WRITE and Use of APO BAPIs page in SCM Wiki.
    Thanks,
    Somnath

  • Stock not in SNP Planning Book

    Hi
    We are doing a global implementation and we have seen the issue where stock exists in live cache, and is correctly considered in SNP Heuristics, but the stock on hand is not displayed in the SNP planning book.
    This is NOT an issue with the stock category, as the same stock category is displayed for Poland and the UK locations.
    This is leading me to think this might be a time zone issue?
    What possible reasons can people think of where stock of the CC category is in live cache but not displayed in the SNP planning book. But another plant location is performing correctly for CC stock.
    S SB

    I have answered my own issue. The stock on hand macro is initial stock + Receipts - Demands.
    Deployment is running in the evening and pushing out the stock, the day rolls over to the next day and then the deployment STR demand is considered history and as per the above formula is netting off the stock.
    This is a symptom of running the SNP run in the evening, not at 00.01am. (Deployment STRs of stock are instantly in the past) which then affects the stock on hand balance.
    Hope that is clear to anyone else having this issue.
    Simon.

  • APO Cube data is not showing in Planning Book

    Hi All,
              Please help me with the following issue.. We use to load the data to APO cube manually from Flat file by executing BW (Backlog, Historical) reports every week. (not a good practice). That time Planning book was working fine.. And now we automated this process by creating the data marts from BW ODS to APO Cube and the loads are successful with process chain.. But I don’t see cube data in Planning book.. In this process the existing info objects properties (Alpha has been removed) has been changed on APO side for mapping and loading purpose.. So when I load the data , the load is successful but I don’t see the data in the Planning book(Note : the cube was refreshed and I guess I need to generate CVCs and do some thing in TSCUBE).. Please explain me the details steps. I am BW consultant and don’t know much on APO.Present status i see the data in APO cube and not in Planning Book
    Thank you
    Arya
    Edited by: karan s on Apr 3, 2008 8:58 PM
    Edited by: karan s on Apr 3, 2008 8:59 PM

    Hi karan
    have you loaded the data from APO cube into the Planning book with TSCUBE ? you can add this step in your process chain also.
    If you have made changes in the strcture of BW data mapping then you dont need to change CVCs.

  • Graph Title not consistent with Planning Book Name

    Hi Gurus,
    We are facing a strange issue in APO DP .
    Whenever we are opening a dataview with graph, graph title is not in synch with the Planning book name.
    This is happening only for certain users(Not all).
    Please advise if we need to adjust any user specific settings.
    Thanks & Regards,
    Rahul

    Hi Rahul,
    Open your planning book, and load the data view
    Once it is done, display the graphic view
    Then click on Switch graphic settings.  Once it is done,
    on the RHS it will display the graphic settings.
    Goto Value axis  >  Title , under caption ---> change
    the title and then press Save Graphic settings
    Regards
    R. Senthil Mareeswaran.

  • Time bucket not displaying in planning book

    When I opened planning book, the time bucket is not displaying as it used to be. I tried to select CVC to be displayed in the planning book and got the following error message:
    @5C\QError@     Insufficient information about read period transferred
    @5C\QError@     Error reading data - Planning book cannot be processed further
    Insufficient information about read period transferred
    Message no. /SAPAPO/TSM231
    This internal error should not occur during normal processing. However if this message is displayed, contact your system administration or the SAP hotline quoting the message number.
    Any idea what went wrong?

    Hi Nic,
    Either someone deleted the time bucket profile, or else the periodicities in the time bucket profile are not in line with the periodicity allowed in your planning area.
    Go to Advanced Planning and Optimization-> Demand Planning -> Environment -> Current Settings -> Maintain Time Buckets Profile for Demand Plng and Supply Network Plng, or directly use the tcode "/SAPAPO/TR30".
    Check that your time bucket profiles ZDP_PBP_9Q & ZDP_PBP_5Q exist by using F4 help, and also select them to see what periods are used in the time bucket profile e.g. weeks, days, etc.
    If you don't find the time bucket profile, then they need to be created (based on names, my guess is that *9Q will contain 9 quarters, and *5Q will contain 5 quarters). I expect that issue lies here itself.
    If time buckets profile exist, then check the following:
    1) Go to /sapapo/msdp_admin, select your planning area. See the storage bucket profile name in the "info" tab.
    2) Go to /SAPAPO/TR32  (Periodicities for Planning Area). Give the name of the Storage bucket profile that you see in 1.
    3) Check what periods are used in storage bucket profile.
    4) Storage bucket profile needs to have lower periods maintained than the time bucket profile. e.g. assuming that your time bucket profile has quarters, then you need to have at least quarter maintained in storage bucket profile. Even if you have day or week or month selected in storage bucket profile, it's ok because these are smaller periods than quarters what you have in time bucket profile.
    Also make a note if "post period" is checked. Note the name of "fiscal year variant" if that is maintained along with this tick. I hope you don;t need to go further but if above don;t resolve your issue, then we need to check the fiscal year variant.
    Thanks - Pawan

  • Data selection not showing in Planning book

    Hi everybody,
                We were using one info cube on APO side and so from cube the data will be shown in the APO planning book..
    Now we modifed the cube on APO by adding new infosource and new mappings from BW side with data marts.. I can see the data is successful loaded to cube, but the slection it self is not showing.. i dont see anything related to cube and so i couldnt run the planning book.. My point is data is available in cube bu planning book now have no data...it is not showing any data..
    thanks
    arya

    There might be few things you should probably check
    1) In the planning object structure just activate the POB. through the context menu.
    2) I think you might have assigned the Infocube into the Planning areas as Infocube Fed key figures. Make sure that all the characteristics remain the same. There might be inconsistency between the char of the new Cube and the already existing PA.
    3) Create time series to the PA or perform initialization of the PA.
    4) Try creating a CVC manually and see if it allows to create.
    Atleast now you should be able to see the key figures in the Planning Area.
    Let me know if it works.

  • MSCI planning transaction - planning data have not seen in the report

    Dear expert,
    We are updating the sales planning via transaction MC88. So my goal is to see the results in the reports MCSI, but I have not seen the planned quontity. I have only seen the Actuals.
    Please help me how to set up the system in order to see planned data in the report.
    Thanks in advance.
    Best Regards,
    Slavisa

    Hi,
    The report will say "No Data Available" only when the selection of variables doesn't match with the data exists in the InfoCube.
    Or when the condition is activated with the setting wherein no data found in the Cube.
    Apply the condition or variable selection for which the data exists in the backend(Cube).
    Rgds,
    Murali

  • Switched to apple wireless extreme and Leopard and have not seen ATV since

    Upgraded to extreme for wireless and Leopard for the home. Have not seen my ATV show up in iTunes since. How do I make it show up again so I can sync new photos and TV shows? Thanks.

    From the ATV menu Go To: Sources
    then select: Connect to New iTunes
    then you should see ATV in iTunes under Devices
    enter the passcode and you should be all set.

  • How can you block production for a specific product in SNP planning book

    Hi All,
    Looking for a way to manually indicate a decision to prevent production in a specific cell for a product in the SNP planning book utilizing the supply planning and capacity leveling heuristics.  For this requirement the resource would have available capacity during that time period.  It also could plan other products in that time period.  The requirement is for a planner to manually go into the planning book to somehow indicate that the heuristic should not consider that time period as available for a specific product, while still leaving the resource available for other products.
    Has anyone run into this before?  Any experience on how to stop a heurisitc from considering a specific time bucket  for a specific product as available for orders?
    Thanks
    -Mike

    Hello Mike,
    I haven't tried it yet myself but I kow that there is the option in the Planning Book to manually fix several periods for a specific location product. This will prevent the heuristic from planning these periods for the specified product. For details please have a look in the Online Help for SNP under key word "Order Fixing".
    regards
    Christian

  • Upload Notes to DP planning area

    Hi All,
    We have requirement of initializing the planning area and then reloading the data by backupcube.
    Also notes created/maimtained in the planning books needs to be backed up and loaded back after planning area initialization.
    Please let me know the process for downloading and uploading the notes to the planning area.
    Thanks & Regards
    Shankar Dhangar

    Hi Shankar Dhangar,
    As far as I am aware, the note are stored in a separate table and should not be deleted when you deinitialise the PA.
    As long as you keep the characteristic in your POS you should be fine.
    Have a look at note 571629, it might help you.
    Thanks and Regards
    Julien

  • Excel upload data to planning book not working

    Hello Gurus,
    i have checked the online resources first before posting this thread here as this is most old topic relating to upload of excel data to planning book key figures.
    Here is what i have done so far
    1) from the planning book, i chose a view and downloaded the file to desktop and saved it as CSV. i populated the key figure values and saved the csv file as-is back to desktop
    2) i had to remove the hdeader from the file as APO threw back an error that it could not interpret the period (header) as the number
    3) when i took out the header i simply pasted the values and the file was ok
    4) i went to planning book, loaded the file, checked the file and it said that the data was read and i clicked on upload the file
    5) everything was green, then but i do not see the values in the grid of the planning book
    what else i'm missing.
    can someone please help me
    thanks
    Ravi

    Hello DB and Ada. Thank you for your valuable suggestions. I know i might be missing something silly here. If i keep the header that i downloaded from the planning book into csv file, i get an error while uploading the file back to planning book that unable to interpret 11/2014 as a number.
    P11/2014 is the header, Period 11/2014 is the fiscal period. we plan in fiscal periods.
    if i take out the header from the csv file and just populate the key figure values, then i do not get any error when i load the file back to planning book, but then the values do not show up in the planning book grid.
    i'm keeping the planning book in the change mode while uploading the file as i got that error saying that i need to keep the planning book in change mode for the file to load data properly to planning book.
    Thanks
    Ravi

  • Unable to release transport request for modified Planning book from Dev Sys

    Hi All
    can someone advice on this:
    We have included a new key figure to our existing Planning book, which is already defined in Planning Area. This key figure is just getting shipping data for comparison and is not having any impact on macros also. We inserted key figure and set the attributes as output only and all looks good in Development system. But when we created transportation request and trying to release request it is giving error "Test Call of transport control program (tp) ended with return code 0208" Message no: TK094
    can any one advice on this
    KV

    Hello,
    Please check with Basis team. I think this is not related to planning book that you are trying to export. A look in the message text gives the following:
    Check the following points:
    Feasibility of the transport control program tp
    Parameter settings in the transport profile
    Availability of the transport directory and the subdirectories (cofiles, data, log, sapnames, bin)
    Write authorization for the subdirectories
    Write authorization for the files of the subdirectories cofiles, data, log, sapnames
    Release the request again when the error has been removed.
    Hope this helps.
    Warm regds,
    Ashutosh

Maybe you are looking for