Force Application to choose network interface

Hi Everyone,
My target computer as two NIC,
Eth1:
IP: 192.168.0.14
Mask: 255.255.255.0
GateWay: 192.168.0.254
Eth2:
IP: 10.2.5.168
Mask: 255.255.0.0
Gateway: Blank
Eth1 is supposed to be connected to the network, Eth2 is only connected to a camera.
I use a Blank String Control connected to the string to IP VI as in the attached pic to retrieve the computer IP address and use it to find the presence of another equipement on Eth1 subnet,
Unfortunatly when the Eth2 cam is connected and configured the blank string control gives back the IP of the Eth2.
According to this page http://www.ni.com/white-paper/12558/en I have set the right configuration, but I still have this problem.
How can I force the soft to use the right NIC
I have also read this topic: http://forums.ni.com/t5/LabVIEW-Idea-Exchange/Allow-user-to-select-the-which-NIC-to-use-for-network/... and I don't understand why it has been rejected
Thanks a lot,
Solved!
Go to Solution.
Attachments:
BlankIP.JPG ‏11 KB

Right click on string-ip and select multiple output. You should then be able to perform a check on the array to pull out the relevant IP address.
edit: Here's a way to show all the IPs as an array of strings. Probably not the most elegant or efficient way to do it though

Similar Messages

Assigning certain applications to specific network interfaces

I connect to a wired and wireless network. Each have different uses.
I'd like to assign the web browsing and some other tasks to the wireless and the filesharing and NAS to the wired network.
Is there a way to assign this? or is it one or the other?

Just so we understand your setup:
You have two networks that you're connecting to, at
the same time?
Two routers/BaseStations?
Your airport card gets an IP like 10.0.1.x
Your ethernet gets an IP like...192.168.0.x
Something like that.

How to Network Interface for Remote Debugging in Adobe Flash Professional CS6?

How to Network Interface for Remote Debugging in Adobe Flash Professional CS6?

Check out : http://helpx.adobe.com/flash/using/whats-new-cs6.html
In that click on "Choose network interface for remote debugging for AIR" section.
Hope it helps.

Use VPN connection as a listen network interface in Web Application proxy

I have a test environment: domain in hyper-v with Sharepoint and Office Web Apps servers (all under Windows 2012 - Windows 2012 R2).
Because my home ISP does not permit some inbound ports (80,443) in a gate machine (under Windows 2012 R2) I create a vpn connection (by "setup a new connection or network") to my outside vpn server. On this vpn server the ports forwarding is configured
and work fine (f.e. default IIS site is visible).
I try to public my Sharepoint 2013 Foundation in Internet over this vpn connection and faced with the problem - WAPx (Web application proxy) does not bind to this vpn connection, only to traditional network interfaces.
The question is how to make listening WAPx the VPN interface?

Hi,
Thank you for posting in Windows Server Forum.
Please check beneath thread and article might helpful in your case.
Configure a reverse proxy device for SharePoint Server 2013 hybrid
http://technet.microsoft.com/en-us/library/dn607304(v=office.15).aspx
Forcing VPN users through a proxy
http://social.technet.microsoft.com/Forums/en-US/5a6a502d-4583-4c51-8486-3af982ba92da/forcing-vpn-users-through-a-proxy?forum=winserverNIS
What’s New in 2012 R2: People-centric IT in Action - End-to-end Scenarios Across Products
http://blogs.technet.com/b/in_the_cloud/archive/2013/07/17/people-centric-it-in-action-end-to-end-scenarios-across-products.aspx
Hope it helps!
Thanks,
Dharmesh

Need help .. 4g usb modem .. application installed but cannot detect the usb modem .. mobily network interface installed but cannot detect the unit

need help .. 4g usb modem .. application installed but cannot detect the usb modem .. mobily network interface installed but cannot detect the unit

When you contacted the modem manufaturer what did they have to say?

How to choose the good Network Interface on a server ?

Hi all,
On server you have generally more than one ip address so ...How to choose the good Network Interface on a server for the NoSQL Node ?
Thank you for all
C.Pruvost.

Hi Charles I only consider storage nodes and their replicated nodes.
Actually I show an error in the logs saying that one of my storage node use a loopback address. On my laptop I have a network interface and a loopback address (disabled)...when starting sn1 I show that the port 5000 is only linked to the ip address 0.0.0.0 so it is not the good ip address..although i use for configuring :
java -jar ..\lib\kvstore-2.0.23.jar makebootconfig -root root1 -port 5000 -admin 5001 -host ipaddress_of_my_laptop -harange 5010,5020
and after
java -jar ..\lib\kvstore-2.0.23.jar start -root root1
If you have a sample tutorial that explains how simulate on the same laptop an Oracle NoSQL architecture running on 3 disctinct servers please give us this information.
Thank you for all.
Christophe.
PS : error message
Failures: Task 1 ERROR at 2013-01-15 07:23:19 UTC: DeploySN sn3(pruv
ost-pc:5200): 1/DeploySN failed.: Register: Cannot mix loopback and non-loopback
addresses in the same store. The store value is not configured to use loopback
addresses but storage node pruvost-pc:5200 is a loopback address. (11.2.2.0.23)
: Register: Cannot mix loopback and non-loopback addresses in the same store. T
he store value is not configured to use loopback addresses but storage node pruv
ost-pc:5200 is a loopback address. (11.2.2.0.23) java.lang.IllegalStateException
: Register: Cannot mix loopback and non-loopback addresses in the same store. T
he store value is not configured to use loopback addresses but storage node pruv
ost-pc:5200 is a loopback address.
at oracle.kv.impl.sna.StorageNodeAgent.register(StorageNodeAgent.java:15
48)
at oracle.kv.impl.sna.StorageNodeAgentImpl$2.execute(StorageNodeAgentImp
l.java:194)
at oracle.kv.impl.sna.StorageNodeAgentImpl$2.execute(StorageNodeAgentImp
l.java:188)
at oracle.kv.impl.fault.ProcessFaultHandler.execute(ProcessFaultHandler.
java:90)
at oracle.kv.impl.sna.StorageNodeAgentImpl.register(StorageNodeAgentImpl
.java:186)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
Edited by: chpruvos on Jan 14, 2013 11:24 PM
And my ipconfig
Windows IP Configuration
Wireless LAN adapter Wireless Network Connection 2:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Ethernet adapter Local Area Connection 3:
Connection-specific DNS Suffix . :
IPv4 Address. . . . . . . . . . . : 172.20.10.2
Subnet Mask . . . . . . . . . . . : 255.255.255.240
Default Gateway . . . . . . . . . : 172.20.10.1
Ethernet adapter Local Area Connection* 24:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Wireless LAN adapter Wireless Network Connection:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Ethernet adapter Local Area Connection:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
and
C:\Users\cpruvost>ping pruvost-pc
Pinging PRUVOST-PC.fr.oracle.com [172.20.10.2] with 32 bytes of data:
Reply from 172.20.10.2: bytes=32 time<1ms TTL=128
Reply from 172.20.10.2: bytes=32 time<1ms TTL=128
Reply from 172.20.10.2: bytes=32 time<1ms TTL=128
Reply from 172.20.10.2: bytes=32 time<1ms TTL=128
Ping statistics for 172.20.10.2:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
Edited by: chpruvos on Jan 14, 2013 11:25 PM

Setting applications to use specific network interfaces

How do I configure my computer such that specific applications will default to a different network interface than all the rest?
I want to set it up so that Adium always tries to use AirPort first and everything else uses ethernet if it's available.
Powerbook G4 1.5 Ghz Mac OS X (10.4.8) 1GB RAM

You can't (normally) get there from here.
What you're trying to do is affect the routing (route certain traffic through a specific interface). The issue is that routing works at the IP level, not the application level. This means that you can tell the system to route a.b.c.d (e.g. the address of the IM server you're connecting to) through a speciic router at w.x.y.z (e.g. the AirPort).
In order to do this, though, you need to have different IP address/subnet masks on each interface.
For example, assuming your wired ethernet is using 192.168.1.2/255.255.255.0 and your wired ethernet router is at 192.168.1.1, and your AirPort interface is using 10.1.1.2 with the AirPort router at 10.1.1.1 you can run the command:
<pre class=command>sudo route add a.b.c.d 10.1.1.1</pre>
and all traffic for a.b.c.d will go over the AirPort link.
Note that it doesn't matter what protocol you use - any traffic destined for a.b.c.d, whether it's AIM, HTTP, FTP or anything else - or what application you use - Adium, Safari, FireFox, etc. - they'll all use the AirPort link.
Note that this technique will NOT work if you have both interfaces on the machine configured in the same subnet, but this is not a supported configuration, so you shouldn't be doing that anyway.

DHCP server admin - no network interfaces to choose from

When I first installed OSX server I was able to create a DHCP subnet range and my clients are still connecting to the server and working fine. Now if I go to edit my subnet range, nothing shows up under subnets. Also, if I attempt to add a subnet, the selection menu for Network Interface shows no interfaces. Both en0 and en1 are working properly otherwise. Any thoughts?

In Network Preferences -> Show: Network Port Configurations, are the network ports ticked?

Dual network interface when joining multicast group

Hello,
I've have a machine with two networks interfaces, eth0 and eth1. The route table is configured to send all the multicast traffic through eth1.
This is
route add -net 224.0.0.0 netmask 240.0.0.0 dev eth1
I have the following code that joins to a multicast address to listen incoming messages in my Java application
InetAddress group = InetAddress.getByName(multiCastAddress);
socket = new MulticastSocket(Integer.parseInt(multiCastPort));
socket.joinGroup(group);
The result is that the application can not see the multicast traffic since the joinGroup operation is always done on eth0, guess because JVM selects the first one available.
If I change the route entry to use eth0 for all the multicast traffic, the same code works perfectly, and from my Java application I can see the multicast traffic.
This is
route add -net 224.0.0.0 netmask 240.0.0.0 dev eth0
Is there any way to force to join a specific network interface?
Thanks

The answer is staring you in the face in the Javadoc:
http://java.sun.com/j2se/1.5.0/docs/api/java/net/MulticastSocket.html#joinGroup(java.net.SocketAddress,%20java.net.NetworkInterface)
That bug report only concerns setNetworkInterface(), which the OP isn't using, on Linux and IPv6, and it's dated 2002.

Unable to receive multicast on a multi network interface host

Can anyone please help?
I am not able to receive multicast on a multi network interface host.
This is the code:
public class LegacyMulticast {
public static void main(String[] args) throws IOException {
InetSocketAddress group = new InetSocketAddress("224.10.20.30", 12345);
NetworkInterface iface = NetworkInterface.getByName("eth3");
MulticastSocket socket = new MulticastSocket();
socket.setSoTimeout(5000);
socket.joinGroup(group , iface);
byte[] b = new byte[4096];
DatagramPacket datagram = new DatagramPacket(b, b.length);
try {
socket.receive(datagram);
System.out.println("Success");
catch (SocketTimeoutException ste) {
System.out.println("Failure");
socket.leaveGroup(group, iface);
The funny thing is that when I start this code, Wireshark detects IGMP join on the correct network interface caused by joinGroup call, followed by constant UDP traffic on correct port which I aim to receive and finally I see correct IGMP leave caused by leaveGroup call and the UDP traffic stops.
I just don't receive anything on socket.receive call.
I am trying to figure this one out for days now. Pls help someone :)
P.S. I suspected security, but System.getSecurityManager() call returns null.
P.P.S. I also tried implementing this with NIO, but with same result.

public class LegacyMulticast {
public static void main(String[] args) throws IOException {
InetSocketAddress group = new InetSocketAddress("224.10.20.30", 12345);
NetworkInterface iface = NetworkInterface.getByName("eth3");
MulticastSocket socket = new MulticastSocket(12345);
socket.setSoTimeout(5000);
socket.joinGroup(group , iface);
byte[] b = new byte[4096];
DatagramPacket datagram = new DatagramPacket(b, b.length);
try {
socket.receive(datagram);
System.out.println("Success");
catch (SocketTimeoutException ste) {
System.out.println("Failure");
socket.leaveGroup(group, iface);
This is still not working.
The multicast is coming from the network (not localhost), OS is Windows 7.
When I start a multicast stream localy via VLC application on this same group and port, I receive the traffic in this Java application OK.
Once again, Wireshark detects IGMP join and leave and multicast traffic flow on eth3 network interface initiated by the Java application, but it just doesn't see the UDP datagrams.

[SOLVED] Network interface enp2s0 no longer detected

Hello,
Yesterday after rebooting, right after Grub, systemd-fsck does its stuff (clearing blocks, etc...) then nothing.
After a quick research I've found that removing "quiet" from the Grub command line would allow more messages to be displayed, which was quite helpful.
This is in fact not a partition mounting problem, here is what I have:
[ OK ] Started Accounts Service.
[ TIME ] Time out waiting for device sys-subsytem-net-devices-enp2s0.device
[ DEPEND ] Dependency failed for dhcpcd on enp2s0.
[ OK ] Reached target Multi-User System.
[ OK ] Reached target Graphical Interface.
I obviously have a networking problem (and probably a "Graphical Interface" or Nvidia related thing problem), so I log in another console, and after doing ip link list, I only have the loopback listed, no enp2s0 or WiFi interface, for some reason they are no longer detected.
I've run the live version of Arch to mount and arch-chroot my partitions, not to mention my network interfaces are detected and I can upgrade things with pacman, I've tried to disable dhcpcd on enp2s0 to avoid the time out thing, and while I can say it does what it's supposed to do, it doesn't solve anything anyway since I'm still stuck at Reached target Graphical Interface. (and don't have any network access, to state the obvious).
I've even thought about a Kernel/Driver problem after an update, but I'm not sure, any idea or some log I can have a look at ?
Thank you for your time.
Last edited by Blaxar (2013-06-25 18:35:50)

Thank for the tip, I've just had a look at pacman.log:
[2013-06-23 11:07] [PACMAN] Running 'pacman -Syu'
[2013-06-23 11:07] [PACMAN] synchronizing package lists
[2013-06-23 11:08] [PACMAN] starting full system upgrade
[2013-06-23 11:10] [PACMAN] upgraded automake (1.13.2-1 -> 1.13.4-1)
[2013-06-23 11:10] [PACMAN] upgraded ca-certificates (20130119-2 -> 20130610-1)
[2013-06-23 11:10] [PACMAN] upgraded cantarell-fonts (0.0.12-1 -> 0.0.13-1)
[2013-06-23 11:10] [PACMAN] upgraded cloog (0.18.0-1 -> 0.18.0-2)
[2013-06-23 11:10] [PACMAN] upgraded libcups (1.6.2-2 -> 1.6.2-3)
[2013-06-23 11:10] [PACMAN] upgraded cups (1.6.2-2 -> 1.6.2-3)
[2013-06-23 11:10] [PACMAN] upgraded e2fsprogs (1.42.7-2 -> 1.42.8-1)
[2013-06-23 11:10] [PACMAN] upgraded glib2 (2.36.2-1 -> 2.36.3-2)
[2013-06-23 11:10] [PACMAN] upgraded xkeyboard-config (2.9-1 -> 2.9-2)
[2013-06-23 11:10] [PACMAN] upgraded iso-codes (3.41-1 -> 3.43-1)
[2013-06-23 11:10] [PACMAN] upgraded gnome-desktop (1:3.8.3-1 -> 1:3.8.3-2)
[2013-06-23 11:10] [PACMAN] upgraded gnome-icon-theme-symbolic (3.8.2.2-1 -> 3.8.3-1)
[2013-06-23 11:10] [PACMAN] upgraded gzip (1.5-3 -> 1.6-1)
[2013-06-23 11:10] [PACMAN] upgraded lib32-e2fsprogs (1.42.7-1 -> 1.42.8-1)
[2013-06-23 11:10] [PACMAN] upgraded lib32-glib2 (2.36.2-1 -> 2.36.3-2)
[2013-06-23 11:10] [PACMAN] upgraded lib32-krb5 (1.11.2-1 -> 1.11.3-1)
[2013-06-23 11:10] [PACMAN] upgraded libxi (1.7.1-1 -> 1.7.1-2)
[2013-06-23 11:10] [PACMAN] upgraded lib32-libxi (1.7.1-1 -> 1.7.1-2)
[2013-06-23 11:10] [PACMAN] upgraded mesa (9.1.3-1 -> 9.1.3-2)
[2013-06-23 11:10] [PACMAN] upgraded lib32-mesa (9.1.3-2 -> 9.1.3-3)
[2013-06-23 11:10] [PACMAN] upgraded libbsd (0.5.2-1 -> 0.5.2-2)
[2013-06-23 11:10] [PACMAN] upgraded libltdl (2.4.2-9 -> 2.4.2-10)
[2013-06-23 11:10] [PACMAN] upgraded libmbim (1.0.0-1 -> 1.2.0-1)
[2013-06-23 11:10] [PACMAN] upgraded libnautilus-extension (3.8.1-1 -> 3.8.2-1)
[2013-06-23 11:10] [PACMAN] upgraded libpeas (1.8.0-2 -> 1.8.1-1)
[2013-06-23 11:10] [PACMAN] upgraded libqmi (1.2.0-2 -> 1.4.0-1)
[2013-06-23 11:10] [PACMAN] upgraded libreoffice-uk (4.0.3-1 -> 4.0.4-1)
[2013-06-23 11:10] [PACMAN] upgraded libtool (2.4.2-9 -> 2.4.2-10)
[2013-06-23 11:10] [PACMAN] upgraded libusb-compat (0.1.4-2 -> 0.1.5-1)
[2013-06-23 11:10] [PACMAN] upgraded libxv (1.0.8-1 -> 1.0.9-1)
[2013-06-23 11:10] [ALPM-SCRIPTLET] >>> Updating module dependencies. Please wait ...
[2013-06-23 11:10] [ALPM-SCRIPTLET] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2013-06-23 11:10] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
[2013-06-23 11:10] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2013-06-23 11:10] [ALPM-SCRIPTLET] ==> Starting build: 3.9.7-1-ARCH
[2013-06-23 11:10] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2013-06-23 11:10] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2013-06-23 11:10] [ALPM-SCRIPTLET] -> Running build hook: [autodetect]
[2013-06-23 11:10] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2013-06-23 11:10] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2013-06-23 11:10] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2013-06-23 11:10] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2013-06-23 11:10] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2013-06-23 11:10] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2013-06-23 11:10] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2013-06-23 11:10] [ALPM-SCRIPTLET] ==> Image generation successful
[2013-06-23 11:10] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
[2013-06-23 11:10] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2013-06-23 11:10] [ALPM-SCRIPTLET] ==> Starting build: 3.9.7-1-ARCH
[2013-06-23 11:10] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2013-06-23 11:10] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2013-06-23 11:10] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2013-06-23 11:10] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2013-06-23 11:10] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
[2013-06-23 11:10] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: bfa
[2013-06-23 11:10] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2013-06-23 11:11] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2013-06-23 11:11] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2013-06-23 11:11] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2013-06-23 11:11] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2013-06-23 11:11] [ALPM-SCRIPTLET] ==> Image generation successful
[2013-06-23 11:11] [PACMAN] upgraded linux (3.9.6-1 -> 3.9.7-1)
[2013-06-23 11:11] [PACMAN] upgraded logrotate (3.8.4-2 -> 3.8.5-1)
[2013-06-23 11:11] [PACMAN] upgraded nautilus (3.8.1-1 -> 3.8.2-1)
[2013-06-23 11:11] [PACMAN] upgraded nvidia (319.23-2 -> 319.23-3)
[2013-06-23 11:11] [PACMAN] upgraded openresolv (3.5.4-3 -> 3.5.5-1)
[2013-06-23 11:11] [PACMAN] upgraded pacman (4.1.1-1 -> 4.1.2-1)
[2013-06-23 11:11] [PACMAN] upgraded poppler (0.22.4-1 -> 0.22.5-1)
[2013-06-23 11:11] [PACMAN] upgraded poppler-glib (0.22.4-1 -> 0.22.5-1)
[2013-06-23 11:11] [PACMAN] upgraded ppp (2.4.5-7 -> 2.4.5-8)
[2013-06-23 11:13] [PACMAN] Running 'pacman -S libreoffice-fr'
[2013-06-23 11:13] [PACMAN] installed libreoffice-fr (4.0.4-1)
[2013-06-23 11:13] [PACMAN] Running 'pacman -S libreoffice'
[2013-06-23 11:15] [PACMAN] installed raptor (2.0.9-2)
[2013-06-23 11:15] [PACMAN] installed rasqal (1:0.9.30-1)
[2013-06-23 11:15] [PACMAN] installed redland (1:1.0.16-2)
[2013-06-23 11:15] [PACMAN] installed hyphen (2.8.6-1)
[2013-06-23 11:15] [PACMAN] installed boost-libs (1.53.0-2)
[2013-06-23 11:15] [PACMAN] installed clucene (2.3.3.4-6)
[2013-06-23 11:15] [ALPM-SCRIPTLET] * see https://wiki.archlinux.org/index.php/LibreOffice
[2013-06-23 11:15] [ALPM-SCRIPTLET] -------------------------------------------------------------------
[2013-06-23 11:15] [ALPM-SCRIPTLET] LibreOffice has been split into several packages:
[2013-06-23 11:15] [ALPM-SCRIPTLET] - libreoffice-common
[2013-06-23 11:15] [ALPM-SCRIPTLET] - libreoffice-{base,calc,draw,impress,math,writer} - frontend applications
[2013-06-23 11:15] [ALPM-SCRIPTLET] - libreoffice-{gnome,kde4} - desktop integration plugins
[2013-06-23 11:15] [ALPM-SCRIPTLET] - libreoffice-{sdk,sdk-doc} - add-on and doc for programming using
[2013-06-23 11:15] [ALPM-SCRIPTLET] the LibreOffice APIs and for creating
[2013-06-23 11:15] [ALPM-SCRIPTLET] extensions (UNO components).
[2013-06-23 11:15] [ALPM-SCRIPTLET] -------------------------------------------------------------------
[2013-06-23 11:15] [ALPM-SCRIPTLET] * you need to install at least one libreoffice-langpack
[2013-06-23 11:15] [ALPM-SCRIPTLET] * you may want to pacman -Ss libreoffice-extensions
[2013-06-23 11:15] [ALPM-SCRIPTLET] to see what additional extensions are prepared to install
[2013-06-23 11:15] [ALPM-SCRIPTLET] * it's recommended to install {hunspell,mythes,hyphen}-xx pkg
[2013-06-23 11:15] [ALPM-SCRIPTLET] for spell checking
[2013-06-23 11:15] [ALPM-SCRIPTLET] * make sure you have installed some ttf font (ttf-dejavu recommended)
[2013-06-23 11:15] [PACMAN] installed libreoffice-common (4.0.4-1)
[2013-06-23 11:15] [PACMAN] installed libreoffice-base (4.0.4-1)
[2013-06-23 11:15] [PACMAN] installed lpsolve (5.5.2.0-2)
[2013-06-23 11:15] [PACMAN] installed libreoffice-calc (4.0.4-1)
[2013-06-23 11:15] [PACMAN] installed libreoffice-draw (4.0.4-1)
[2013-06-23 11:15] [PACMAN] installed libreoffice-gnome (4.0.4-1)
[2013-06-23 11:15] [PACMAN] installed libreoffice-impress (4.0.4-1)
[2013-06-23 11:15] [PACMAN] installed libreoffice-math (4.0.4-1)
[2013-06-23 11:15] [PACMAN] installed libwpd (0.9.6-1)
[2013-06-23 11:15] [PACMAN] installed libwps (0.2.9-1)
[2013-06-23 11:15] [PACMAN] installed libreoffice-writer (4.0.4-1)
[2013-06-23 19:57] [PACMAN] Running 'pacman -S ssh-key'
[2013-06-23 23:01] [PACMAN] Running 'pacman -Syu'
[2013-06-23 23:01] [PACMAN] synchronizing package lists
--From the live CD from now on--
[2013-06-23 23:29] [PACMAN] Running 'pacman -Syu'
[2013-06-23 23:29] [PACMAN] synchronizing package lists
[2013-06-23 23:30] [PACMAN] starting full system upgrade
[2013-06-23 23:32] [PACMAN] removed grub-bios (2.00-2)
[2013-06-23 23:32] [PACMAN] removed grub-common (2.00-2)
[2013-06-23 23:32] [ALPM-SCRIPTLET] Generating grub.cfg.example config file...
[2013-06-23 23:32] [ALPM-SCRIPTLET] This may fail on some machines running a custom kernel.
[2013-06-23 23:32] [ALPM-SCRIPTLET] done.
[2013-06-23 23:32] [PACMAN] installed grub (2.00-1)
[2013-06-23 23:32] [PACMAN] upgraded lib32-libjpeg-turbo (1.3.0-2 -> 1.3.0-3)
[2013-06-23 23:32] [PACMAN] upgraded libgsf (1.14.26-1 -> 1.14.27-1)
[2013-06-23 23:32] [PACMAN] upgraded libquvi-scripts (0.4.15-1 -> 0.4.16-1)
Among all of that, I've spotted this:
[2013-06-23 11:10] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
[2013-06-23 11:10] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: bfa
Do you think this may explain something ?
Anyway, from lspci:
00:00.0 Host bridge: Intel Corporation Core Processor DMI (rev 11)
00:03.0 PCI bridge: Intel Corporation Core Processor PCI Express Root Port 1 (rev 11)
00:08.0 System peripheral: Intel Corporation Core Processor System Management Registers (rev 11)
00:08.1 System peripheral: Intel Corporation Core Processor Semaphore and Scratchpad Registers (rev 11)
00:08.2 System peripheral: Intel Corporation Core Processor System Control and Status Registers (rev 11)
00:08.3 System peripheral: Intel Corporation Core Processor Miscellaneous Registers (rev 11)
00:10.0 System peripheral: Intel Corporation Core Processor QPI Link (rev 11)
00:10.1 System peripheral: Intel Corporation Core Processor QPI Routing and Protocol Registers (rev 11)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06)
00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 06)
00:1c.3 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 (rev 06)
00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 06)
00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a6)
00:1f.0 ISA bridge: Intel Corporation 5 Series Chipset LPC Interface Controller (rev 06)
00:1f.2 RAID bus controller: Intel Corporation 82801 SATA Controller [RAID mode] (rev 06)
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06)
01:00.0 VGA compatible controller: NVIDIA Corporation GT200 [GeForce GTX 260] (rev a1)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168 PCI Express Gigabit Ethernet controller (rev 03)
03:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6315 Series Firewire Controller
04:00.0 Multimedia video controller: Conexant Systems, Inc. CX23887/8 PCIe Broadcast Audio and Video Decoder with 3D Comb (rev 04)
05:00.0 Network controller: Ralink corp. RT3090 Wireless 802.11n 1T/1R PCIe
ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-Core Registers (rev 04)
ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 04)
ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 04)
ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 04)
ff:03.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller (rev 04)
ff:03.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Target Address Decoder (rev 04)
ff:03.4 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Test Registers (rev 04)
ff:04.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Control Registers (rev 04)
ff:04.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Address Registers (rev 04)
ff:04.2 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Rank Registers (rev 04)
ff:04.3 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Thermal Control Registers (rev 04)
ff:05.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Control Registers (rev 04)
ff:05.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Address Registers (rev 04)
ff:05.2 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Rank Registers (rev 04)
ff:05.3 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Thermal Control Registers (rev 04)
and ip a:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
Last edited by Blaxar (2013-06-24 20:10:25)

Using a specific network interface

Hello, I would like to know how I can force Mac OS X to use a specific network interface while connecting to my mac mini (from the iMac):
I'm connected to the internet (I mean the local network) using the airport, and I connected my iMac with the mac mini using an ethernet cable (because I want to transfer files faster, and I don't want to reboot my mini in target disk mode), but when I connect to the mini (using the "share" feature) it seems to use the airport connection. Of course I could disable the airport interface to force it to use the ethernet one (and it works) but I don't want to...
So, how can I force a specific interface? I don't mind using a command line command to mount it initially btw.
Thanks

Hello,
Try using a different IP address range to put each interface in a different subnet. For example use 10.0.0.x and 255.255.255.0 for the Ethernet connection and 192.18.2.x and 255.255.255.0 for the Airport.
mrtotes

Solaris 10 u11 : Is it possible to mix IPMP with vertual network interface

Hi
I have a system with 4 Ethernet interfaces , I'd like to try to have virtual network interface on two of them . then configure IPMP between each two.
- Is it possible to mix IPMP and VNIC ?
- online , I found posts about having vnic on solaris by creating additional interface file (ex, /etc/hostname.bge0:1 ) and also the IPMP create such interface?
- How can I know which IPMP version installed on the system ? and how to know I'm reading the right configuration guide?
- on what basis should i choose the type of IPMP for my system (Link-based or Probe-based)
Thanks in advance
HEBA

Hi.
IPMP can coexist with VNIC.
IPMP - part of Solaris. So you not need check version of IPMP. Just read Docs for Solaris.
http://docs.oracle.com/cd/E23823_01/html/816-4554/ipmptm-1.html#scrolltoc
It's not clear what Vnic you plan use. Is it VLAN or just additional IP on interface ?
For test address of IPMP you should configure interface like bge0:1 with additional options.
Regards.

PRIF-33 and CRS-02307 while changing public network interface, RAC

Hi,
I'm working on an Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production With the Partitioning, Real Application Clusters, Automatic Storage Management. It's a 3 nodes RAC: mgvdb01/02/03
After the installation I had to change IP (different IP and Subnet) to the RAC:
From 172.17.1.0/24 to 10.19.201.0/24.
Node from 172.17.1.31/32/33 to 10.19.201.31/32/33.
The same for VIP(s): from 172.17.1.131/132/133 to 10.19.201.131/132/133.
The oifcfg iflist shows correct ips configuration:
[oracle@mgvdb01 bin]$ ./oifcfg iflist -p -n
eth0 10.19.201.0 PRIVATE 255.255.255.0
eth1 172.17.100.0 PRIVATE 255.255.255.0
I'm following doc 276434.1 from Metalink: How to Modify Public Network Information including VIP in Oracle Clusterware, starting from Case III "Changing public network interface, subnet or netmask".
But at the first operation I've a problem:
[oracle@mgvdb01 bin]$ ./oifcfg getif
eth0 172.17.1.0 global public **THIS HAS TO BE CHANGED**
eth1 172.17.100.0 global cluster_interconnect
[oracle@mgvdb01 bin]# ./oifcfg delif -global eth0/172.17.1.0
PRIF-33: Failed to set or delete interface because hosts could not be discovered
CRS-02307: No GPnP services on requested remote hosts.
PRIF-32: Error in checking for profile availability for host mgvdb02
CRS-02306: GPnP service on host "mgvdb02" not found.
PRIF-32: Error in checking for profile availability for host mgvdb03
CRS-02306: GPnP service on host "mgvdb03" not found.
[oracle@mgvdb01 bin]$ ./oifcfg delif -node mgvdb01 eth0/172.17.1.0
[oracle@mgvdb01 bin]$ ./oifcfg setif -node mgvdb01 eth0/10.19.201.0:public
PRIF-33: Failed to set or delete interface because hosts could not be discovered
CRS-02307: No GPnP services on requested remote hosts.
PRIF-32: Error in checking for profile availability for host mgvdb02
CRS-02306: GPnP service on host "mgvdb02" not found.
PRIF-32: Error in checking for profile availability for host mgvdb03
CRS-02306: GPnP service on host "mgvdb03" not found.Then I restart Clusterware service, but issuing
[oracle@mgvdb01 bin]$ ./oifcfg getif
eth0 172.17.1.0 global public
eth1 172.17.100.0 global cluster_interconnectnothing seems to be changed.
This is blocking following operations, the ones in Case IV.
Do you have any suggestion?
Thanks in advance,
Samuel

Hi,
I'm working on an Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production With the Partitioning, Real Application Clusters, Automatic Storage Management. It's a 3 nodes RAC: mgvdb01/02/03
After the installation I had to change IP (different IP and Subnet) to the RAC:
From 172.17.1.0/24 to 10.19.201.0/24.
Node from 172.17.1.31/32/33 to 10.19.201.31/32/33.
The same for VIP(s): from 172.17.1.131/132/133 to 10.19.201.131/132/133.
The oifcfg iflist shows correct ips configuration:
[oracle@mgvdb01 bin]$ ./oifcfg iflist -p -n
eth0 10.19.201.0 PRIVATE 255.255.255.0
eth1 172.17.100.0 PRIVATE 255.255.255.0
I'm following doc 276434.1 from Metalink: How to Modify Public Network Information including VIP in Oracle Clusterware, starting from Case III "Changing public network interface, subnet or netmask".
But at the first operation I've a problem:
[oracle@mgvdb01 bin]$ ./oifcfg getif
eth0 172.17.1.0 global public **THIS HAS TO BE CHANGED**
eth1 172.17.100.0 global cluster_interconnect
[oracle@mgvdb01 bin]# ./oifcfg delif -global eth0/172.17.1.0
PRIF-33: Failed to set or delete interface because hosts could not be discovered
CRS-02307: No GPnP services on requested remote hosts.
PRIF-32: Error in checking for profile availability for host mgvdb02
CRS-02306: GPnP service on host "mgvdb02" not found.
PRIF-32: Error in checking for profile availability for host mgvdb03
CRS-02306: GPnP service on host "mgvdb03" not found.
[oracle@mgvdb01 bin]$ ./oifcfg delif -node mgvdb01 eth0/172.17.1.0
[oracle@mgvdb01 bin]$ ./oifcfg setif -node mgvdb01 eth0/10.19.201.0:public
PRIF-33: Failed to set or delete interface because hosts could not be discovered
CRS-02307: No GPnP services on requested remote hosts.
PRIF-32: Error in checking for profile availability for host mgvdb02
CRS-02306: GPnP service on host "mgvdb02" not found.
PRIF-32: Error in checking for profile availability for host mgvdb03
CRS-02306: GPnP service on host "mgvdb03" not found.Then I restart Clusterware service, but issuing
[oracle@mgvdb01 bin]$ ./oifcfg getif
eth0 172.17.1.0 global public
eth1 172.17.100.0 global cluster_interconnectnothing seems to be changed.
This is blocking following operations, the ones in Case IV.
Do you have any suggestion?
Thanks in advance,
Samuel

JBOss, Two Network Interfaces, Flex Problem

Hi,
I am using JBoss as an application server, and has a flex
application trying to reach WebServices (Apache),
located on the server.
I'm using Flex's WebService class to connect to the web
service. The machine on which JBoss is running has two
network interfaces (two ip addresses). One reachable, the
other is not (and It must be that way).
I load the web services using m_webService.wsdl =
"http:XXX/A/B/x.wsdl",
In the logs I can see that the wsdl loads, but when I try to
call to some remote method, flash tries to access it
using the unreachable IP (again it can be seen with log
file).
Does somebody knows how to solve the problem?
Does somebody knows where from flex knows the unreachable ip,
(I never pass it!)?
Thank you.

Adobe Newsbot hopes that the following resources helps you.
NewsBot is experimental and any feedback (reply to this post) on
its utility will be appreciated:
Flash, Web Services, and Data Binding:
TV: JBoss's Seam: Eliminate Complexity and Build
Next-Generation Web 2.0 Applications .... Example 3 - Not Using the
Web Service Connector or Data Binding
Link:
http://flex.sys-con.com/node/48956
Vic on Flex: asp.net c# webservice consumed by flex:
using System.Web; using System.Web.Services; namespace
Director { public class Hello : System.Web.Services.WebService ....
Flash 8, Flex 2, LocalConnection
Link:
http://viconflex.blogspot.com/2006/10/aspnet-c-webservice-consumed-by-flex.html
Flash, Web Services, and Data Binding:
The First and Only Independent Magazine for Adobe Flex
Developers .... Once opened, we can load the WSDL of a Web service
into it and Flash will parse it
Link:
http://flex.sys-con.com/node/48635
Vic on Flex: asp.net C# data webservice for Flex:
Oct 2, 2006 ... public class MemberService :
System.Web.Services.WebService .... Flash 8, Flex 2,
LocalConnection · October (8)
Link:
http://viconflex.blogspot.com/2006/10/aspnet-c-data-webservice-for-flex.html
How to send parameters to webservice and get data back:
I'm able to connect the webservice threw my Button in Flex.
.... Are you able to retrieve a valid response from the web service
using an alternative tool
Link:
http://www.flexdeveloper.eu/forums/index.php?topic=935.msg2810
web service array result undefined - ActionScript.org Forums:
Nov 28, 2007 ... web service array result undefined Flash
Remoting. ... Hi just a idea you are returning a Number aka integer
from your jboss function
Link:
http://www.actionscript.org/forums/showthread.php3?t=154047
Disclaimer: This response is generated automatically by the
Adobe NewsBot based on Adobe
Community
Engine.

Force Application to choose network interface

Similar Messages

Maybe you are looking for