Force Firmware "Upgrade"?

Hey, ever since I did a firmware update a few weeks back I've been having strange errors, not to mention that for some reason it updated to the ENGLISH version, making me lose my T9 Spanish Dictionary (native language), forcing me to use Multitap.
Is there a way to force the phone to update to the old Spanish Firmware that I had?

My X301 Intel x18 got bricked also after a BIOS update then secure erase (was going to sell it). I plugged it to a USB kit and onto a desktop and it was recognised and able to format. But plugging it back to the lenovo it is still a brick. My lucky star there was warranty it was replaced by lenovo.
You may want to try it and extract the data, if it works. And hopefully you can still format it and made it work pluggin back to the lenovo.

Similar Messages

  • After firmware upgrade problem CP1025NW

    I am trying to upgrade the firmware on my CP1025NW printer.  I downloaded and ran the firmware updater and it runs for a bit and then reports that it "Could not find appropriate firmware file". I have tried running the updater both through a USB connection to the printer and a wireless connection. Both result in the same error.
    After that on the printer is blinking caution sign and I cant print anymore (, I think soft erase old firmware and did not record new one.
    Exist some kind of special software for an force firmware update ? or how can I restore it ?

    hi there,
    could you provide the community with a little more information to help narrow troubleshooting? What operating system are we running the update from?
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Firmware upgrade problem CP1025NW

    I am trying to upgrade the firmware on my CP1025NW printer. The firmware version on the printer is 20100510 and the version listed on the HP site is 20110826. I downloaded and ran the firmware updater and it runs for a bit and then reports that it "Could not find appropriate firmware file". I have tried running the updater both through a USB connection to the printer and a wireless connection. Both result in the same error.
    Any help would be appreciated.
    This question was solved.
    View Solution.

    I am trying to upgrade the firmware on my CP1025NW printer.  I downloaded and ran the firmware updater and it runs for a bit and then reports that it "Could not find appropriate firmware file". I have tried running the updater both through a USB connection to the printer and a wireless connection. Both result in the same error.
    After that on the printer is blinking caution sign and I cant print anymore (, I think soft erase old firmware and did not record new one.
    Exist some kind of special software for an force firmware update ? or how can I restore it ?

  • Firmware upgrade on mac book air 13"

    i clicked the update next to the firmware upgrade 1.6 option in app store, it is now stuck on "checking for new updates", i can't shutdown or anything, it says you must wait for os updates to complete before shutting down.  the message has been displayed for the last 6 hours.  anybody got any pointers, have contacted apple, but they are closed in the uk now, US care are trying to call but can't seem to get through to me.

    You can force quit the app store and load it down manually.  See this thread for a link.
    https://discussions.apple.com/thread/4141390?tstart=0

  • Firmware Upgrade - OLD Text Messages/Photos Appearing BEFORE I Text

    I recently went through the Thunderbolt Firmware Upgrade. All is well EXCEPT when I go to answer a text message. BEFORE I start typing, old messages and photos that I had sent to a totally different recipient months ago, are already entered into the response text box. I have to back out (back space) to get rid of text or I have to delete an arbitrary photo which was AUTOMAGICALLY inserted for me!
    Not only does this waste my time, it can be very confusing! I could also inadvertently send private photos or private texts which were meant and sent to someone else MONTHS ago, to someone they were never intended for....!
    Anyone else have their text messaging being hijacked by the operating system since the recent firmware upgrade??
    Not sure who is responsible for the fix on this but, from what I see on this forum, I am lucky by comparison, to the other issues being experienced by those who updated their firmware (2/11/2013) when Verizon forced it onto us.
    THIS NEEDS TO BE FIXED! Does no one BETA TEST these upgrades before they are forced upon us?

        Hi Loonlady!
    I understand your concern w/your messaging! I use messaging all the time and would not be happy either. I have some troubleshooting steps for you. Please give it a try and keep me posted:
    Wipe Cache Partition
    Before booting into Recovery, ensure that fast boot has been turned off:
    1. Tap Menu
    2. Tap Settings
    3. Tap Power
    4. Uncheck the box for Fast boot.
    Once fast boot has been turned off, reboot into Recovery to wipe cache partition:
    1. Power off the device
    2. While holding down the Volume Down button, press the Power button. The device will boot into the bootloader which is a white screen with 3 Androids at the bottom screen.
    3. Using the Volume Down button, select RECOVERY
    4. Press the Power button to select the option. Device will reboot into a black screen with a red exclamation mark in a red triangle atop a device.
    5. Press Volume Up and Power button to get into the Recovery menu.
    6. Using Volume Down button, highlight the Wipe cache partition option.
    NOTE: Be sure that Wipe cache partition is highlighted. Do not choose Wipe data/factory reset as this will result in loss of data!
    7. Press the Power button to select the option
    8. When the process, is complete, ensure that Reboot system now option is highlighted.
    9. Press the Power button to select the option and reboot the device into the OS.
    Christina B
    VZW Support
    Follow us on Twitter @VZWSupport

  • Creative MuVo TX FM Firmware Upgrade 1.18.02 - The End For Many Players - Par

    This is part 2 of the story since you cannot post such a long message in one posting.
    >>Dear >>>>in my first mail I wrote already:>>>>After installing the recovery driver I run the >>firmware update again. It says that it found a >>device in recovery mode and more (pretty quick >>message) and after this it searches for this >>device - and does not find any device connected >>to an USB port.>>>> From this statement you can see that I installed the recovery drivers
    >>and put the player in recovery mode. Then the player is seen by your >>update software since it finds the player in recovery mode. But after >>this it cannot transfer the new firmware because suddenly it does not >>see the player anymore on an USB port...>>>>To be honest - if your support team would read the mails a bit more >>carefully we all could save a lot of time... And of course I did >exactly>>as described by you and in the update notes. And this all on two >>different computers with two different OS - XP and Win98 as I said in >my>>first mail already...>>>>Best Regards,>>>>Peter>>>>>>>>At 02:6 .0.05 +000, you wrote:>>>Dear xxxxxx>>>>>>Thank you for replying to us.>>>>>>In response to your email, kindly ensure that your player is used on >>the>>>minimum operating system requirement. When connecting your player >>>directly to the computer, was your player being recognized? I have >>>verified the firmware update.>>>>>>Kindly verify the below steps you have used to update the firmware for>>>>>your player: >>>. Download the MuVoTXFM_PCFW__8_02.exe file into your local hard >>>disk.>>>2. Connect your player to your computer.>>>3. Double-click the firmware upgrade file.>>>4. When prompted to set your player in Recovery mode, disconnect your
    >>>player from your computer. Press and hold the Play button while >>>connecting your player to your computer's USB port. Continue to hold >>the>>>Play button for about 0 seconds after connecting your player to your
    >>>computer. Release the Play button when the Find New Hardware dialog >box>>>>>>>appears on the computer screen. Did you encounter any issue?>>>5. Follow the instructions on the screen to install recovery drivers >>for>>>your player.>>>6. Double-click the firmware upgrade file and follow the instructions
    >>on>>>the screen.>>>>>>Are you still encountering the same issue?>>>>>>Do email back on the status concerning the issue so that I can assist
    >>>you further. Thank you. >>>>>>Best Regards>>>>>><name removed>>>>Technical Support>>>Creative Labs Asia>>>>>>To provide feedback on your "Creative Experience" please click on the
    >>>following link:>>>http://www.**bleep**.com/support/contact/welcome.asp?r=CLA&d=TS>>>>>>========== >>>DISCLAIMER >>>========== >>>This email and any attachments may contain private, confidential and >>>privileged materials for the sole use of Creative's intended recipient>>>>>and is not to be forwarded or copied to others. Any review, copying >or>>>>>>>distribution of this email or any attachments by others is strictly >>>prohibited. If you are not Creative's intended recipient, please >>inform>>>Creative immediately by responding to this email and thereafter >>>permanently delete the original and any copies of this email together
    >>>with any attachments. Thank you>>>>>>Original Message Follows:>>>------------------------>>>Thanks for your response. I am a bit confused since I answered many of>>>>>your questions in my last mail already. And I have been working with
    >>>computers for more than 30 years and did many upgrades with THIS >player>>>>>>>already. Since other users have exactly the same problem - if you >check>>>>>>>the forum - it must be a problem with the player or your upgrade >>>software. Should I send the player to your company for repair? But in
    >>>any case - you should warn the customers using this upgrade or take it>>>>>from your webpage. If you read my old mail - I tried the whole upgrade>>>>>on 2 different OS and 2 different Computers with your latest drivers.>>>>>>Best Regards,>>>>>>Peter>>>>>>>>>At 07:38 0.0.05 +000, you wrote:>>>>Dear xxxxxx>>>>>>>>Thank you for reaching us at Creative Technical Support; we >appreciate>>>>>>>>the opportunity to assist you.>>>>>>>>Based on the information you provided, may I know if are you using >the>>>>>>>>player on Windows XP>>>> or Windows 98? I would like to inform you that the player only >>support>>>>>>>>>>the below operating system:>>>>>>>>Microsoft? Windows? 98SE/2000/Me/XP>>>>>>>>You might like to consider the below factors when connecting your >>>player>>>>to the computer's USB port:>>>>>>>>. Make sure you have the latest drivers, especially USB, installed >>for>>>>your motherboard. If you're not sure, check with your motherboard >>>>manufacturer.>>>>>>>>2. Make sure your motherboard has USB v. ports, supplying at least
    >>>>500mA to the USB ports. If you're not sure, check with your >>motherboard>>>>>>>>>>manufacturer.>>>>>>>>3. Try unplugging all other USB devices from the system.>>>>>>>>4. If you're using a hub, try connecting the product directly to the
    >>>>onboard USB and vice versa.>>>>>>>>5. You might wish to verify the functionality of your product on >>>another>>>>computer.>>>>>>>>Do let me know the result.>>>>>>>>In case if you need any clarification, please do not hesitate to >>>contact>>>>us. Thank you.>>>>>>>>Best Regards>>>>>>>><name removed>>>>>Technical Support>>>>Creative Labs Asia>>>>>>>>To provide feedback on your "Creative Experience" please click on the>>>>>>following link:>>>>http://www.**bleep**.com/support/contact/welcome.asp?r=CLA&d=TS>>>>>>>>========== >>>>DISCLAIMER >>>>========== >>>>This email and any attachments may contain private, confidential and
    >>>>privileged materials for the sole use of Creative's intended >recipient>>>>>>>>and is not to be forwarded or copied to others. Any review, copying
    >>or>>>>>>>>>>distribution of this email or any attachments by others is strictly >>>>prohibited. If you are not Creative's intended recipient, please >>>inform>>>>Creative immediately by responding to this email and thereafter >>>>permanently delete the original and any copies of this email together>>>>>>with any attachments. Thank you>>>>>>>>Original Message Follows:>>>>------------------------>>>>=======================>>>>>>>>Subject: CLA (CTL) - Technical Support Request - (MuVo TX FM)>>>>Name: xxxxxx>>>>E-mail Address: [email][email protected]][email protected][/url]>>>>Country: Thailand>>>>Self Description: Advanced PC User>>>>------------------>>>>Support Inquiry: ID(3) My Creative hardware stopped functioning >>>>correctly >>>>Product: MuVo TX FM>>>>Serial Number: C6PF32477002804Z>>>>Date Of Purchase: /2/2005>>>>>>>>------------------>>>>Operating System: Windows XP>>>>Creative Model Number: MUVO TXFM 52 MB>>>>Computer Brand/Model: >>>>Processor/CPU: >>>>Memory: >>>>BIOS Type/Revision: >>>>System Board/Chipset: >>>>------------------>>>>>>>>Detailed Problem Description:>>>>I tried to update to the latest firmware >>>>MuVoTXFM_PCFW__8_02 since I stay in Thailand >>>>and need the Thai letters. I installed the >>>>recovery driver since the upgrade software >>>>required this and did exactly what is described. >>>>After installing the recovery driver I run the >>>>firmware update again. It says that it found a >>>>device in recovery mode and more (pretty quick >>>>message) and after this it searches for this >>>>device - and does not find any device connected >>>>to an USB port.>>>>>>>>I have tried this many times and even with the OS->>>>Win98. The upgrade software detects the device in >>>>recovery mode but after this nothing more >>>>happens - it does not find it on an USB-Port >>>>anymore. >>>>>>>>=======================
    Moderator note: Please remove the name of the advisor when posting up e-mails.
    Message Edited by Catherina-CL on 0-3-2005 2:4 PM

    This is part of the message since you cannot post such a long message in posting.
    This should show how lost you might be with your warranty. If you install the Firmware Upgrade .8.02 your player might be useless. There is no way to make it work again. Not really. If you understand what Creative seems not to do. So dear user - buy a new player. If you want to know what the solution is to make your player work again post here. If there are enough postings I will explain it here. Too sad that Creative does not do it. It is their job not mine... But again - I am not talking about a problem what is nice to have it solved. I am talking about a player that does not work anymore. If you do not want to wait for my solution just send your player for repair - it was not your fault that it does not work anymore...
    This story with the great support was a test of Creative and will be used in a review. So be not surprised to find it somewhere else.
    Here the Creative support story. The first mail is at the bottom. I had to make part and part 2 since you cannot post such a long message here.
    To: Creative Labs Asia Customer Support <[email][email protected]][email protected][/url]>Subject: Re: CLA (CTL) - Technical Support Request - (MuVo TX FM) (KMM7755874I6636L0KM)Dear,I know the solution long time already. I just wanted to test the support at Creative. The problem is real and forces owners of your players to buy a new one since their playes get useless after the upgrade. Not only that Creative puts a faulty upgrade on their homepage - their support is good for nothing. But this was a test of the Creative support. I hardly can believe that Creative is not in the position to solve a very simple problem caused by Creative - what has severe consequences for their customers. But this mail story confirms exactly this. So my advice to any customers - stay away from this company and their products - what is the final result of my test. If you want to know the solution for the problem please contact me again - I am glad to help such a poor company :-)))) For free? I am not so sure...since my player was not for free too...Best Regards,PeterPS: The product is still within the "police period" of my dealer. And I did not just buy the product. If you ever read what your system tells you (what I had to enter) - it was long time ago.
    At 03:48 3.0.05 +000, you wroteear PeterBased on the information you provided, since you have just bought the product locally, you may like to contact and check with the dealer firstfor their purchase policy period and see if the product is still within their policy period. If they are unable to assist you, do contact us so that we can assist you promptly in your issue. Thank you. Best Regards<name removed>Technical SupportCreative Labs AsiaTo provide feedback on your "Creative Experience" please click on the following link:http://www.**bleep**.com/support/con...asp?r=CLA&d=TS========== DISCLAIMER ========== This email and any attachments may contain private, confidential and privileged materials for the sole use of Creative's intended recipient and is not to be forwarded or copied to others. Any review, copying or distribution of this email or any attachments by others is strictly prohibited. If you are not Creative's intended recipient, please informCreative immediately by responding to this email and thereafter permanently delete the original and any copies of this email together with any attachments. Thank youOriginal Message Follows:------------------------Dear .,I am a bit confused. What does my problem have to do with buying it on an oversea/business trip? This you really have to clarify. And why do you need my contact number/residential address if you have my contact email address already? You want to come to me and bring me a new player?Would be fine :-) But since there are many others with the same problem there must be a better solution.But in any case - I bought it were I li've and not on a business trip - the dealer is just around the corner - but I guess with more than 30 years almost daily IT experience I have a bit more knowledge than him. Igave you the serial number and the date of purchase. I bought it in Thailand where I li've now. Best Regards,PeterAt 09:28 2.0.05 +000, you wrote:>Dear Peter>>Regards to your issue, may I know is the unit purchase locally or during>Oversea/Business trip? If the unit is purchased during oversea/business
    >trip, kindly provide me with the information of the place of purchase, >your current location (residential address) and contact number so that I>will be able to provide you with the advice required promptly.>>Do email back on the status concerning the issue so that I can assist >you further. Thank you. >>Best Regards>><name removed>>Technical Support>Creative Labs Asia>>To provide feedback on your "Creative Experience" please click on the >following link:>http://www.**bleep**.com/support/contact/welcome.asp?r=CLA&d=TS>>========== >DISCLAIMER >========== >This email and any attachments may contain private, confidential and >privileged materials for the sole use of Creative's intended recipient >and is not to be forwarded or copied to others. Any review, copying or
    >distribution of this email or any attachments by others is strictly >prohibited. If you are not Creative's intended recipient, please inform>Creative immediately by responding to this email and thereafter >permanently delete the original and any copies of this email together >with any attachments. Thank you>>Original Message Follows:>------------------------>Dear ,>>I was talking about Win98SE. I guess there is are not many people using
    >Win98 anymore.>>The problem is that the player is in recovery mode already. When I plug
    >it into the USB port it does not show up as a dri've anymore. But the OS>confirms that I have put in a device into the USB port when I plug it in>pressing the play button. Also when I run the upgrade software it says >that it has found a device in recovery mode but then it does not find it>anymore. But again - neither WinXP nor Win98SE allow me to format the >dri've since it does not show up as dri've at all.>>Sorry for all this. But realize that I and many others have a piece of >scrap as long as we cannot find a solution for this problem. In the >forum people write that they even bought a new player already since this>firmware upgrade made an end to their TX FM.>>Best Regards,>>Peter>>At 03:0 2.0.05 +000, you wrote:>>Dear Peter>>>>Based on the information you provided that you have verified the player>>>>on another computer with Windows 98. I would like to inform you that >the>>player and the updated firmware only support the below operating >system:>>>>Microsoft? Windows? 98SE/2000/Me/XP>>>>I understand that you are also using the player on a Windows XP >>computer. However, you might like to verify your player on another >>computer that meets the above mentioned minimum operating system. Do >let>>me know the result. >>>>If issue persists but when connecting your player directly to the >>computer the player is being recognized, format the player using the >FAT>>file system, and download and install the latest >>driver/firmware/application update available through the below link: >>>>(Note: All contents in the player will be removed when you format your
    >>player, please backup the files) >>>>http://www.asia.creative.com/support/downloads/ >>>>. Insert your MuVo TX FM player into the USB port on your PC/Laptop, >>try a different USB port or hub if it is not detected. >>2. Open Windows Explorer. The player will be recognized as a Removable
    >>Disk. >>3. Right-click on the player and choose Format. >>4. In the File system drop down menu, select FAT, and then click the >>Start button. Do not select FAT 32, though it is selected as default by>>>>Windows XP. >>>>After the formatting is complete, make sure that you stop your player >>before disconnecting it from your computer. (Please take note that stop>>>>your player before disconnecting it from your computer is a must. >>Otherwise it will cause damage to your player's memory >storage/Harddisk)>>>>>>To stop your player in Windows XP, Windows 2000 or Windows ME Click on
    >>the Safely Remove Hardware icon on the Taskbar, click Safely remove USB>>>>mass Storage device, and disconnect your play when you are prompted to
    >>do so. >>>>Make sure that the icon below appears on the LCD screen again for at >>least fi've seconds before disconnecting your player.>>>>Do let me know the result. >>>>In case if you need any clarification, please do not hesitate to >contact>>us. Thank you.>>>>Best Regards>>>><name removed>>>Technical Support>>Creative Labs Asia>>>>To provide feedback on your "Creative Experience" please click on the >>following link:>>http://www.**bleep**.com/support/contact/welcome.asp?r=CLA&d=TS>>>>========== >>DISCLAIMER >>========== >>This email and any attachments may contain private, confidential and >>privileged materials for the sole use of Creative's intended recipient
    >>and is not to be forwarded or copied to others. Any review, copying or>>>>distribution of this email or any attachments by others is strictly >>prohibited. If you are not Creative's intended recipient, please >inform>>Creative immediately by responding to this email and thereafter >>permanently delete the original and any copies of this email together >>with any attachments. Thank you>>>>Original Message Follows:>>------------------------
    Moderator note: Please remove the name of the advisor when posting up e-mails.
    Message Edited by Catherina-CL on 0-3-2005 2:43 PM

  • Firmware upgrade for Three's E71?

    I see there are several generic firmware upgrades around. My E71 was supplied by Three and reports: 
    100.07.76 08-06-2008
    RM-346 E71-1 241.02
    I believe upgrades should be authorised by the network. Is there a Three upgrade? Nokia's upgrade software says I have the latest version. Would the upgrader know about Three's upgrades?
    Thanks
    100.07.76 08-06-2008
    RM-346 E71-1 241.02
    Three UK network

    When I talked to a Three customer service advisor, he told me you could only send email through Three's server, Hotmail, Yahoo! and MS Exchange. Having tested 4-5 mailers, I was about to report back that you can indeed send email through Gmail (and possibly others as well), bypassing Three's restrictions. Fortunately, Gmail now allows sending email through their smtp server using the From address of your choice (after registration and verification) -- until a few months ago, they automatically replaced the From address with your gmail address, which made the service useless for many of us.
    In my experience, no serious ISP blocks port 25, quite rightly too. Three cannot know whether the remote smtp server you are trying to connect to implements authentication -- it is the responsibility of the remote smtp server admin to handle spam injections, by not offering open relaying. Three forcing users to send through its own smtp server messes up various things -- eg if you choose to occasionally connect through wifi or while roaming you would have to change the mailer's setup. Even if your ISP's server supports encryption, you are forced to send unencrypted email through Three. You can't make the most of IMAP setups ie having sent messages automatically stored in the Sent folder of your ISP's server. Three replaces your From address with your Three address as your messages go through its smtp server. 
    It is clear that all this is Three's idea of making money. If this kind of unacceptable restriction was really designed to block spam, they should (a) block all relevant ports, not just 25  (b) make sending email through Three's smtp server free, not charge £2.50 for three messages (c) not replace your From address with your Three address automatically and (d) make all this clear in the terms and conditions.When I brought (d) to their attention, they denied it but when I asked them to, they failed to point out where this restriction or the hidden charge is explained. Since then, I checked the T&Cs repeatedly and I cannot locate any mention. Even if there is one, the fact that I have been unable to locate it after repeated and targetted attempts says something. Which is why I consider the contract and the T&Cs null and void, and I will be reporting them to ASA and Trading Standards. So much for a company that claims the moral highground by advertising its transparency, leading public campaigns for cheaper calls etc. 
    BTW, I don't have any problems with their coverage. 
    100.07.76 08-06-2008
    RM-346 E71-1 241.02
    Three UK network

  • [SOLVED] linux-firmware upgrade

    is it safe to delete the file
    /usr/lib/firmware/carl9170-1.fw
    or force the upgrade of this package?
    pacman says it exist in filesystem,
    and complains on conflicting files.
    ezik
    Last edited by shulamy (2013-05-04 14:25:30)

    Is it orphaned?
    pacman -Qo /usr/lib/firmware/carl9170-1.fw
    If nothing owns it, probably safe to delete, but just to be sure, rename it to something else.
    EDIT:  I don't have that on my system:
    % pacman -Ss linux-firmware
    core/linux-firmware 20121118-1 [installed]
    Firmware files for Linux
    % pacman -Qo /usr/lib/firmware/carl9170-1.fw
    error: failed to read file '/usr/lib/firmware/carl9170-1.fw': No such file or directory
    Last edited by graysky (2013-05-04 13:46:12)

  • WRT45G firmware upgrade

    The WRT45G operated flawlessly until a firmware upgrade from 3.0 to 4.2.1.1
    Periodically, usually after a reboot - Internet (external) access is blocked, and attempts to adjust firewall settings, or restore saved settings fail to correct.
    The only resolution I found - restore to factory settings - allows access to Internet.
    NOTHING else is changed. Nothing has changed on the system except for the firmware update.
    Any ideas how to roll back or to force the router to use the save settings appreciated.
    Its XP - Linksys router and Cablemodem and router set to factory settings.
    Firewall through XP

    What is the exact version number of the router?  Check on the bottom.  Also after all firmware upgrades you are to fully hard reset the router by pressing the reset button on back for 30 seconds and release.  Wait 10 seconds and power cycle the router.  Now you must reconfigure the router from scratch, no backup files.

  • Has the cloud firmware upgrade being fixed yet?

    I am looking to buy a new router (E3200 or greater)
    All the reviews are complaining about that specific firmware upgrade that users` have been forced to with the cloud thing.
    Is this still in place/happening?

    This issue was clarified in this site: http://blogs.cisco.com/home/update-answering-our-customers-questions-about-cisco-connect-cloud-2/. These are the items tackled in that blog: Linksys customers are not required to sign-up for the Cisco Connect Cloud service and they are able to opt-out of signing up for an account, Customers can set-up and manage their Linksys router without signing up for a Cisco Connect Cloud account, Cisco will not arbitrarily disconnect customers from the Cisco Connect Cloud service based on how they are using the Internet, Cisco Linksys routers are not used to collect information about Internet usage, Cisco only retains information that is necessary to sign up for and support the Cisco Connect Cloud service , Cisco will not push software updates to customers’ Linksys routers when the auto-update setting is turned off.

  • NMH410 Firmware Upgrading Error

    Hello everyone,
    I recently upgraded the HDDs on my NMH410 and basically it resets everything and even roles back the firmware.
    But this time around I couldn't manage make it upgrade. Everytime I receive this error message:
    "Error - Result"
    Firmware Upgrade has encountered an error. Upgrade Aborted!
    There is a thread on this forum suggesting to change the DNS Server but it didn't work for me either.
    What to do? Anyone having or had similar issues? Is it something from the Cisco's side?
    Is there a way to sideload the firmware or force to install it by directly accessing the hub?

    Here's an article that might help you: http://kb.linksys.com/Linksys/ukp.aspx?pid=80&app=vw&vw=1&login=1&json=1&docid=ec5f31fe7f0f4a8c9a89a...

  • Firmware upgrade for treo 650 on orange network

    i recently bought a old treo 650 on the orange network the problem i have is when i go to downloads it says establishing connection then after a while it just resets i dont know if a firmware upgrade would solve this problem the firmware version i have is 01.21 and the software im running is treo650-1.09-ouk is there any updates to either of these and if so where can i get them thank you in advance
                    gerry
    Post relates to: Treo 650 (Cingular)

    taoryu, Welcome to the discussion area!
    First of all how do you post a new topic on Apple Discussions.
    It' very simple:
    You go to the Apple.com > Support > Discussions > Mac OS X v10.5 Leopard > Mail and Address Book discussion area.
    Click on the link titled "Post New Topic".
    I have some friends who have prying eyes. I have some valuable information come through apple mail. They are not on the computer that often, so I'd rather NOT make a separate user account, but for the few times they are, I don't want Apple Mail so easy to access. Is there a way of securing the information like a password. EVERY email application I've seen has this option, Apple Mail must have something similar. Any ideas???
    You already know the answer. Create a separate OS X user account and force them to log into that.

  • Zen Nano Plus - Connection Problems and Firmware Upgrade probl

    Like many others posting on this forum, for a while I had problems trying to get my GB Zen Nano Plus to be recognized by the .0.03 Firmware Update software.
    I eventually got it by doing this:
    While the Firmware Update software was "Searching" for a device, I kept on unplugging and plugging in the Zen Nano Plus from the USB cable while holding down the Play button, unti it "caught". I tried this since I noticed it would initially see the unit saying "A device has been detected in recovery mode...", but then throw the unit into "non-recovery" mode and hence force the Firmware Update software to keep on searching.
    Anyhoo, after it did finally "catch" it (after about 0 times unplugging/plugging while holding the Play button down), it showed my firmware as .03.02, and so I did the upgrade to .0.03. The upgrade said "Complete". I then take the unit off of USB, and put my battery back in. and. uhm. well. Now it won't turn on at all. *sigh*
    So there I go again in the "unplug-plug" loop on trying to get the older .03.02. Finally caught after about 30 times (yes my hands are tired). And after downgrading to .03.02, putting the battery back in, the unit turns on fine.. WHEW.
    So, beware to everyone. Not sure if I'd trust the .0.03 Firmware. Doesnt seem to work on my Zen Nano Plus, and I JUST bought the thing from Circuit City about a week ago.
    And for those of you having problems getting the Firmware Upgrade to work.. try my (tiring) method.
    I tried this on my Dell D600 laptop (actually used the USB ports on the docking station).
    -taka

    lcvdw wrote:Can you tell me what I am supposed to see if it is connected properly?
    With your player connected and View, Devices by Connection selected in Device Manager navigate through as follows:
    Advanced Config and Power Interface (ACPI) PC
    ->Microsoft ACPI-Compliant System
    -->PCI Bus
    You should then see a series of USB Host Controllers that you will have to click through in turn to find the one your player is connected to.
    Underneath each controller should be a USB Hub, and then devices are listed beneath the hubs.
    For my N200 I have USB Mass Storage Device, Creative MuVo N200 USB Device then Generic Volume.
    Your entry should be similar but with Zen Nano Plus instead of N200.
    While you're there, right-click on the entry for the hub attached to your player and select Properties. On the Power tab it will show how much current the port can supply and in the Attached Devices list it will show how much power the player needs. In my case the hub supplies 500mA and the player needs 00mA.
    PB
    Message Edited by PeeBee on 2-30-2005 02:05 PM

  • T410i SSD user and master password problem after firmware upgrade

    Hello.
    I have problem with my Corsair Force 3 120GB SSD. After firmware upgrade of SSD my master and user HDD passwords are no longer valid. I'm stuck on BIOS screen and cannot unlock my SSD. After firmware upgrade procedure i got BSOD. Same happened during firmware upgrade on my previous SSD (INTEL X25-M 80GB) but after restart everything was OK. Please help!
    Previous firmware version: 1.3
    Current firmware version: 1.3.3
    SSD connected to another computer shows RAW partition data, but firmware version is 1.3.3 - seems like update was successful.

    My X301 Intel x18 got bricked also after a BIOS update then secure erase (was going to sell it). I plugged it to a USB kit and onto a desktop and it was recognised and able to format. But plugging it back to the lenovo it is still a brick. My lucky star there was warranty it was replaced by lenovo.
    You may want to try it and extract the data, if it works. And hopefully you can still format it and made it work pluggin back to the lenovo.

  • PETITION: This is what I would like to see in a new firmware upgrade for the MTP ZEN TO

    FIXES:
    -Ensures correct playback on the player of Zencast audio content that has been transferred using Zencast organiser. Remaining time is displayed correctly, and rewind / fast-forward functions can be used
    - Allows users to transfer tracks between folders on the player when using a program such as Creative Mediasource [THIS IS NEEDED FOR ALL MTP PLAYERS]
    - Allows charging via USB when the player is not being used by a program or is low on battery [THIS FEATURE SEEMS TO HAVE BEEN REMOVED BY MTP UPGRADE]
    ENHANCEMENTS / ADDITIONAL FEAUTRES [I HAVE LISTED THESE BY MY PERSONAL ORDER OF PREFERENCE]:
    ) Allows the playback of Audible content types ,2,3,4 on the player, via a plug-in in Audible Manager
    2) Adds bookmarking feature to the player
    3) Adds SmartVolume EQ feature to the player
    4) Adds DJ menu to the player
    5) Allows user to partition a section of the player for data transfer
    6) Allows user to synchronise tasks from Outlook to the player
    7) Allows TXT files/ Ebooks to be stored/ viewed on the player
    8) Adds BassBoost EQ feature to the player
    PLEASE SIGN THIS PETITION TO URGE CREATIVE TO INTRODUCE AT LEAST SOME OF THESE FIXES / FEATURES IN A FIRMWARE UPGRADE FOR THE MTP ZEN TOUCH - also please feel free to add other suggestions that would improve the functionality of the Zen Touch
    Message Edited by joshua32 on <SPAN class=date_text>05-30-2006 <SPAN class=time_text>:7 PM
    Message Edited by joshua32 on 05-30-2006 :8 PM

    all of these would be awesome, as would lyrics support, I REALLY want that

Maybe you are looking for