Format in the report layout

Hi,
when I create a report using Reports Builder, I can fix the number of decimal digit. For example I can fix two decimal digit (5,00). When I deploy the jsp create on the server and invoke it via URL with the following parameters:http://myHost:myPort/reports/rwservlet?desformat=SPREADSHEET&mimetype=application%2Fvnd.ms-excel&destype=cache&report=%2Fro%2Fsw%2Freports%2Freport_Azzeramenti.jsp&ENVID=IT&dateformatmask=DD%2Fmm%2Fyyyy
the number in excel is 5
Someone can help me to fix the number of decimal digit in excel?
Thanks.
Leonardo.

All numeric values are coming out as asteriks '*'This usually happens when there is not enough space to show the value. The font on the server may be slightly bigger, OR you just have bigger numbers in your test environment compared to development. Try making the field a bit wider.
Edited by: InoL on May 11, 2010 1:54 PM

Similar Messages

Handle in the report layout structur.

Hi Team,
I have created a selection screen with two radio buttons one for Preq Details and another for PO Details.I am showing the output in ALV Report using(Reuse_alv_grid_display).Also i am saving the report layout variants in the alv report using(Reuse_alv_variant_f4,REUSE_ALV_VARIANT_DEFAULT_GET and REUSE_ALV_VARIANT_EXISTENCE).I am getting the layout variant but Layout Variants saved for P-req report should not show up in PO report and vice versa.)what to do for that one?
i have read some postings saying that just we need to a Pass HANDLE in layout structure..but still i am not able to save them in specific report.
Thanks
Shakeer

Hi Friends,
Can any one Please help me..
Thanks,
Shakeer

Date format in the Web layout of Oracle 10g Reports

Dear all,
I want to change the date format in the oracle reports. I am using weblayout & paper layout. I have changed format mask using property inspector. It appears in paper layout. How can i get in the weblayout, please help me.
With Regards,
Srinivas

Hi Srinivas,
I think whatever applicable in Paper Layout should be applicable to Web Layout also.
Regards,
Raj

Altering the report's format without destroying the report layout....{solv}

Hi,
I have developed a tabular report and the layout (lines, rectangles... etc as customer wants) ....
Now , i want to alter only the report style.... that is to change it to group left....
Is it possible... to select the group fields and the fields displayed in the report without redeveloping the report UI (lines , rectangles... e.t.c).
I have tried the report wizard... but the layout destroyed... and have to do the UI from the beginning.....
NOTE : I use Dev10g
Thanks ,
Sim

Hi Sim,
Group Left or Group Above means that you are grouping for 1 or more fields.
In the Data model, you will have to create a new group and drag the group fields to this new group.
In the Layout, you will need to add a new repeating frame below all the other repeating frame, frames, etc. ie. create a repeating frame over existing objects. You may need to move all existing objects down and to the right so that there is enough room to create a new repeating frame over these objects. With the repeating frame selected, from the Arrange Menu, select Send to back (F6) or Move Backwards (F8) several times so that the new repeating frame is below all the objects from the tabular layout.
Also, fix up the source property for the repeating frame. Create a new field(s) inside this new repeating frame for your group left field(s).
Good luck.
John

Setting the report layout for HTML format

hi friends
when I generate my report to HTML file and open it to Internet Explorer it disturbs the actual report little bit like enlarging the fonts, hiding some graphical objects like Lines and wrapping the report. so can u tell me that how can I take the same output format in Internet Explorer as in reports previewer? I'm using Reports 6i and Micrsoft Internet Explorer 6.0. thanx.

I think you should make some modification into main section
e.g. increase height and width of the report....and then see...
I had same problem with text output but this method solve my problem hope
this will help u...
Enjoy Oracle...

How to align object in the report layout

Hello,
I find it very difficult to aligin objects in the report editor or in the template editor. I know there are some alignment options, like aligning to the grid or aligning a group of objects, but they seem to work on the bounding rectangle for the object. For my text objects, those rectangles are arbitrarily sized. So aligning those rectangles does not correctly align the text baseline, for example.
Does anyone have a tip on how you can align objects? I there maybe a way to alter the size of objects by changing a number in a property sheet somewhere?
Regards,
Frans

The problems I am having now occur when I am editing the margin in the template editor. For some reason, the flex and confine options can not be turned off in the template editor. I believe they are turned on in this mode, at least in tools:options: paper layout they are turned on. But anyway, this really does not matter because I don't have nested objects in the margin. The objects that will go flying off are completely unrelated to the object I want to move or resize.
Update: I have just tried editing the layout of a report that was based on the template I am working on. Turning flex off there had a positive effect. It seems indeed the 'flex' setting is to blame for the problems I am experiencing. Thanks for the tip!
So now I would really like to know how to turn of flex in the template editor..

Date formating in the Report

Hi all,
I have print one field in the report.
The field actually concatenation on string and Date
EX: Selected on 30.05.2007
I have declared this field has char (30).
This Date will be taking how ever the stored in the Data Base.
Can anybody give me suggestions?
Date should be How ever user has setting in his profile.
Thank you.

before concatenation on string and Date
convert the date formate in to system formate then u concatenate.....
check for some function M.....
Regards
Anbu

Difficult to achive the report layout with dynamic column names

I have a report layout as below.
So here the column names are dynamic.And each fixed row group has different calculations. I have a date parameter. If I select July 2013, then I need to show data from July 2012 to July 2013 with Columns(Jul-12, Aug-12...Jul-13). How to achive below layout
with dynamic columns?

Hi Sarayu_CM,
According to your description, you want to filter the records of prior year based on only one parameter selection. Right?
In this scenario, we can create two parameters. The first one is for user to select. The second parameter is based on the first parameter selection. We don't need to specify Available Values for the second parameter, but we should use expression to specify
Default Values based on the first parameter selection. Use the expression below:
=DateAdd("m",-12,FormatDateTime(Parameters!param1.Value))
Then we just need to apply a filter on the matrix/dataset to get the records which the date is between values in these two parameters.
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

How to set the default print format for the report

Hi,
In ALV report , i want to defalut specific print format and printer for background processing .
Any clues!!!!!!!!!
Regards
Swatantra

Hi
Please check below code:
DATA: PRIPAR TYPE PRI_PARAMS,
      ARCPAR TYPE ARC_PARAMS,
      LAY    TYPE PRI_PARAMS-PAART,
      LINES TYPE PRI_PARAMS-LINCT,
      ROWS   TYPE PRI_PARAMS-LINSZ.
DATA: val(1).
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
    destination            = 'LOCL'   " <--- Printer Name
    no_dialog              = 'X'
    immediately            = ' '
IMPORTING
    out_archive_parameters = arcpar
    out_parameters         = pripar
    valid                  = val
EXCEPTIONS
    archive_info_not_found = 1
    invalid_print_params   = 2
    invalid_archive_params = 3
    OTHERS                 = 4.
IF sy-subrc <> 0.
*     MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*** Specifying the page formats
    pripar-linct = 65.
    pripar-linsz = 190.
    pripar-paart = 'X_65_132'.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
    in_archive_parameters = arcpar
    in_parameters          = pripar
    no_dialog              = 'X'
*      list_name              = 'Testing Purpose Only' "l_list
IMPORTING
    out_archive_parameters = arcpar
    out_parameters         = pripar
    valid                  = val
EXCEPTIONS
    archive_info_not_found = 1
    invalid_print_params   = 2
    invalid_archive_params = 3
    OTHERS                 = 4.
IF sy-subrc EQ 0.
NEW-PAGE PRINT ON
NEW-SECTION
PARAMETERS pripar
ARCHIVE PARAMETERS arcpar
NO DIALOG.
ELSE.
write:/ 'Unable to create spool'.
ENDIF.
So now a spool is created with the required print parameters...
The list that is created from here will be in the spool.
Once the list is completed, close it with NEW-PAGE PRINT OFF.
Hope this helps.
Regards
Eswar

Limiting the Report Layout access other than Authorization Object S_ALV_LAYO

Dear Experts,
We have an issue of Layout Access limit to Users coz unwittingly these are being deleted.
(Example: IW39 à after F8 à Settings à Layout.)
The Authorization object S_ALV_LAYO which limits the access, has been defined in the multiple Roles, where every User been assigned with these Roles across Three Continents.
Instead of hampering the existing Streamlined Roles, looking for other Options since if it may give odd behaviour after modifying the Roles then all the Users across the continents will be effected.
It will be grateful if we get other options to limit the Layout access instead of controlling through Authorization Object.
Thank you & Have a Great Day!

Thank you Sebastian & Terence,
The Global Roles has maintained with Authorization Object (S_LAYO_ALV) and these are been assigned to Every User coz all Users should access these reports.
So now every User has maintained with the Authorization Object to access.
Now we are trying to Control the Access to limited Users through without hampering the well maintained/streamlined Roles, since if any adverse effects on the modified roles may impact to all the Users across the continents.
Looking for other options.
Thanks, I appreciate your time and efforts on this.

Layout of the reporting services website looks 'strange'

I have installed and configured SQL Server Reporting Services 2012 SP1
When I navigate to http:// localhost/Reports, the layout of the site looks odd and does not look like how I am used to, see the following image
(As I am new I cannot post images so uploaded here http:// postimg.org/image/d2jopp4g3/
I have tried from several machines, all display the same, and from different browsers (IE and Firefox). I have also cleared cache and cookies
On several installations on different machines, we see the same issue. Does anyone know what is wrong? Surely this is not how things are supposed to look?
Thanks

Hello,
Did you get mess format of the report layout when you render the report in report server? Please try to put these tablix in a rectangle to resolve the issue. Alternatively, we can try to enable the compatibility view of the IE to troubleshooting the issue.
Reference: http://support.microsoft.com/kb/2536204
Since the image you’re posted above cannot view, you can refer to the thread below to verify your account to post image.
http://social.technet.microsoft.com/Forums/en-US/1f541d13-8b01-4e95-831a-379ecabecb46/verify-your-account-14?forum=reportabug
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

BI Publisher Report Layout Get Distorted when viewed in different format

Hi Experts,
I am facing issue while running BI Publisher Report.
The Report Layout work fine in one output format (PDF).
But when the same report is generated in different format it get distorted (HTML,EXCEL).
Could any one please let me know how to resolve this issue.
Is there any SR raised for this issue.
Cheers,
Andy

Hi,
I have faced a similar issue, Finally i created a different template for each output type, and tweaked each template through trial and error till the output it provided was what i was looking for in the specified output format, I had a different template for PDF and a different one for HTML. If I used the html optimised template for PDF out, there were all sorts of alignment issues, etc.and vice versa. As for the date format, you can set the parmeter correctly using the word date format properties.

Attribute "Report Layout" is missing in the "Print Attributes" tab for IR

Hallo,
The attribute “Report Layout” is missing in the “Print Attributes” tab for an interactive report?
How to alter the report layout (xsl-fo) of an interactive report?
Has someone any idea where to configure this?
Btw, for the "classic" SQL Report the XSL-FO "Report Layout" can be cahnged in "Print Attributes" and this works fine for me. But I want to change the xsl-fo for the interactive report.
"If you do not select a report layout, a default XSL-FO layout is used. The default XSL-FO layout is always used for rendering Interactive Report regions. ... Unlike classic reports, the Interactive Report Print Attributes can only utilize the default XSL-FO layout and is initiated from the Report Attributes, Download section rather than directly from this screen. Once configured, these attributes only apply only to the current region and cannot be used outside the context of the region."
http://apex.oracle.com/i/doc/bldapp_rpt_print.htm
How can the "default XSL-FO layout" be changed?
Changing is necessary because the Apache FOP 1.0 reports the following error (for the transmitted default XSL-FO):
"fo:simple-page-master", "fo:region-body" must be declared before "fo:region-before"
http://www.w3.org/TR/xsl/#fo_region-before
The default report layout is not saved in:
select * from APEX_040000.WWV_FLOW_REPORT_LAYOUTS
Thx, Willi

I've found two workaround for getting Apache FOP 1.0 to work with Oracle Apex 4.0 for PDF printing of interactive reports:
1, Use an application process to set your custom layout for interactive reports:
[ ] grant all on APEX_040000.WWV_RENDER_REPORT3 to {YOUR_SCHEMA_NAME};
[ ] Create an Application Process e.g. "Custom Report Layout" with constraint for request 'PDF' and Process Text:
declare
v_xsl varchar2(32767);
begin
v_xsl := '<?xml version = ''1.0'' encoding = ''utf-8''?>
<xsl:stylesheet version="2.0"
<fo:region-body region-name="region-body" margin-top="54.0pt" margin-bottom="54.0pt"/>
<fo:region-before region-name="region-header" extent="54.0pt"/>
</xsl:stylesheet>';
APEX_040000.WWV_RENDER_REPORT3.g_prn_template := v_xsl;
end;2, If you have some knowlege in Java change the sequnce of the the nodes in the apex_fop.jsp (or servlet), ie. changing the xsl before you use it for transformation.
The code depends on the solution you are using to parse the xsl string.
Hope this may help someone,
Willi

How to get the SAVE Layout ICON on ALV Grid display report

Hi,
I am using the standard ALV Layout, and I do not get the SAVE LAYOUT Icon on the Menubar, where I could save the report Layout.I am using the layout routine as,
FORM layout_build USING   u_lf_layout TYPE slis_layout_alv.
u_lf_layout-box_fieldname       = 'SELK'. " Checkbox
u_lf_layout-zebra               = 'X'.
u_lf_layout-colwidth_optimize   = 'X'.
u_lf_layout-confirmation_prompt = 'X'.
u_lf_layout-get_selinfos        = 'X'.
u_lf_layout-f2code              = '&ETA' .
u_lf_layout-detail_titlebar     = 'Delivery Due List'.
u_lf_layout-key_hotspot         = 'X'.
u_lf_layout-info_fieldname      = 'COL'.
ENDFORM.                    " layout_build
Is there anything that I am missing. Please suggest.Many thanks for your help.
Regards,
Mira

Hi,
i think you've forgotten param. <b>i_save</b>
x_save = 'X'.
gs_variant-report     = sy-repid.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
       EXPORTING
            I_STRUCTURE_NAME = 'ZTAB01'
            IS_VARIANT       = gs_variant
            IS_layout        = lay
            I_SAVE           = x_save
       TABLES
            T_OUTTAB         = gridtab
       EXCEPTIONS
            OTHERS           = 1.
regards Andreas

Format of the analytic reports changed in OBIEE11g after restart.

Hi all,
After restarting the BI server, the format of the reports changed.
The analytic reports header font sizes has been increased and the report is not showing in tabular view instead it is showing results as in a notepad.
What might be the issue which caused these changes?
Please help me in regarding this..
Thanks & Regards,
Kalyan.

as such we cant say it is an error from BI.....not sure what might be going wrong or is the tool acting upon.
Once bounce all services and look at it.
UPDATED POST
No need of changing any config files as such for that behaviour.....might be something wrong going with the BI tool.
Never i faced such issue as i was working on BI 11g
Cheers,
KK
Edited by: Kranthi on Feb 23, 2011 11:36 PM

Format in the report layout

Similar Messages

Maybe you are looking for