Format of RMS

what is the format of RMS in j2me

hi
I had a related doubt too...
is it possible to read the records stored using recordstore using a non j2me app - a flash lite swf in particular ?
flash is able to read text files, and can retrieve stuff from the website using GET
but does anyone know if there is someway that the flash could read the recordstore
thanx

Similar Messages

Can I assume internal format for RMS recordfilters?

I am constructing the matches() routine to handle a recordfilter using two integers that are at the beginning of each record in the RMS. It runs much faster if I just compare the first eight bytes of the two byte arrays rather than constructing a ByteArrayInputStream and a DataInputStream so I can use the readInt method.
Is it valid to assume that all phones will save integers as four bytes in the recordstore or is the internal format allowed to vary? I don't think big and little endian issues would arise because I am only checking for equality. But if the length varies or separators are added, then my eight-byte assumption falls apart.

Is it valid to assume that all phones will save
integers as four bytes in the recordstore or is the
internal format allowed to vary? Java is always network order, so it will be the same on all platforms. Otherwise the DataIn/OutputStreams would not work either.

Rms space corrupted

Hi,
Im having the following error message:
" javax.microedition.rms.RecordStoreException: RecordStore information has been broken: java.io.EOFException: requested to read 94 bytes. but 76 bytes read."
The problem seems to ocurr when saving the data to the rms, an incoming call is received, and the app is suspended, after that the rms file get corrupted. I couldn't find documentation of this error or a way to solve it.
i try with:
availrms = RecordStore.listRecordStores();
but listRecordStores returns null, and if I try to create the rms again, or delete it, i get the same error.
It?s like the recordstore space has been corrupted, so i have to delete the app, and reinstall it (loosing the clients orders in the process), is there a way to "format" the rms space in order to create the files again? or how can i detect the corrupted rms files and force a deletion of them individually.
The data inside the rms files, are saved in plain text.
Thanks in advance for any help
Edited by: jlocaranza on Aug 28, 2008 5:15 AM

Which platform are u developing for BTW?
if its for Blackberry i would recommend using PersistentObject feature instead.

Import Master Data

Is there any tool we can use to import master data with flat file format into RMS as a batch, such as items, orders,etc? Thanks

Oracle provides Data Conversion Utility with the RMS release 12.0.5 onwards. It's part of RMS package, please check that, using that you can import Core,Stores/Warehouses, Org/Merch Hierarchy,Suppplier and items. It doesnt have provision for importing any transactional item like PO, Reciepts etc..we need to create some manual script to import that.
Thank
Nagesh

The Data Received from the server running AD RMS didn't match the expected format.contact your system administrator for further investigation.

Hi All,
We Have implemented AD RMS in our organisation recently.But the Problem we are facing here many users those are Ms office 2013 we will get the error"The Data Received from the server running AD RMS didn't match the expected format.contact
your system administrator for further investigation." and those who are in Ms office 2010 Professional it says
"The service is Temporally unavailable.Ensure the you have connectivity to this server.This error could be caused if you are working offline.Proxy setting are preventing your connection or intermittent network issue."
Below are the workaround did,
1.Able to reach to Our pipeline ADRMS cluster.
2.We have a valid Certificate.
3.if we type https://adrms.ourdomain.com its working fine.
4.Manually put the registry setting for effected computers.
5. Applied the Hotfixes:MicrosoftFixit50903,KB2627273.
Kindly help or suggest us to resolve the above issue as many computers in domain are not working with IRM.
Thanks and reqard,
Mohammed Siddiq.

Hi Mohammed,
Were you able to fix the issue with CRL disablement?
Did my post help you or make you laugh? Don't forget to click the Helpful vote :) If I answered your question please mark my post as an Answer.

How to read a RMS file

Is it possible to read a RMS file from my pc written by a Midlet application?
I need to find a way to read the rms file and convert it to any format supported by SQL or MS Access.
Thnx!

Rms file structure depend on device.
You must change the point of view.
Don't read rms file by read the file structure but by using the RMS class in j2me.
For example If I have a device that store(in rms) a contacts list by j2me application.
Then I would to store this contact list in mysql or access db I must read the contact list by rms api, store the data in j2me structure (array for example) and then transfer it by http, socket, bluetooth etc in a server that store the data in db.
Another solution is like the first post: Read the rms contents (by RMS api) and store it in a text file(you can do it only in a device with JSR-75 File api). Then import txt file in db.
Don't try to read rms file generated by device in emulator or viceversa is impossible.
http://developer.sonyericsson.com/site/global/techsupport/tipstrickscode/java/p_tipcode103.jsp
http://www.java2s.com/Code/Java/J2ME/Readandwritetotherecordstore.htm

RMS protecting various document types

Hello
I have a need to RMS protect various documents of diverse types. I have been able to use the 2.1 SDK to encrypt and serialize the publishing license. But I am unsure how to package these together.
To explain, assuming that I have encrypted the various components in the main document part of the docx file. Some questions:
1. Should I just replace the original "main document part" contents with the encrypted version?
2. Where do I keep the publishing license in this compound file?
3. What other related entries do I need to make so that when I open with MS Word, it finds the PL and connect to RMS server to get the content key?
4. Are there any documentation on how these should be for various supported file formats?
Any pointers will be much appreciated
Thanks
SN

GoodReader is the Swiss Army Knife of iOS apps.
http://itunes.apple.com/us/app/goodreader-for-ipad/id363448914?mt=8
After you have the app on your iPad go to the bottom of the Apps tab and highlight GoodReader, Click the Add button and browse to the files that you wish to associate with GR on your iPad and add them.

Read the Emoulator RMS file

Hi,
How can i read the emulator RMS file on my PC?
it can help for debuging
Thanks
Lior

That is a broad question... I'll make some asumptions.
I think you have a file with some raw image format. This can be quite a few formats. Every camera firm has it's own proprietry format. Often, when talking about a raw image, it is simply a 2d array of colors. So you'll have a file with numbers that are U8's that represent R G B, alpha R G B, B G R, etc., or a U32 that represent the same, combined in one U32...
The data can be stored binary or ASCII. Both formats are handled differently.
The ASCII format can be one large array of data, or seperated with enters for each scan line.
In both cases, you might need to remove information, like height and width, from the data before parsing the image data.
You can use the "Spreadsheet String To Array" to convert the a ASCII string to a LabVIEW 1D or 2D array. Or use "Read From Spreadsheet File.vi" to read the file directly as an array. Use Reshape Array to convert a 1D array to a 2D array.
The binary file is a bit different. Use "Read Binary File". It will get you a string. This string is a converted array of U8, the string doesn't need to be ASCII. convert this string to an array of U8's, with "String To Byte Array". Convert the 1D array just like before.
Now you have a 2D array. You can convert it into a pixmap with "Flatten Pixmap.vi". You can then display it in a picture control with "Draw Flattened Pixmap.vi".
Regards,
Wiebe.

Can I measure AC - RMS with my 6040E?

I have a few current transducers(LEM) in my application.
(They deliver a AC voltage wich is a mate for the current)
So, I would like to read the RMS voltage with my 6040E (and a SCB68 connector block).
My configuration:

Hi,
The 6040E is a Data Acquisition board, and not a DMM, and can therefore not deliver data in RMS format, however, you can acquire the analog signal using the 6040E and then calculate the RMS value using one of your RMS Waveform Measurements VI's included with labview. You can find them at: Main Palette-> Analyze-> Waveform Measurements. If your application is not time critical (that is, if you can wait for the data to be acquired and then converted to RMS) this would be the most cost effective solution. If you need a faster response I recommend you check out our line of Digital Multimeters.
The second issue you must be aware of is the input voltage. I'm aware that a lot of LEM's supply +-10V output, which would be OK, but if you have a LEM that provides a voltage greater than that you'd have to add signal conditioning to divide that voltage down. You can build your own amplifier, depending on the amount of noise you're dealing with, or check out some of our signal conditioning products, that might help improve the acuracy of your measurement.
I hope all this information was useful. if you need anything else please contact us again.
Greetings
Daniel

Nokia 3500 classic - .rms files created with junk ...

I have purchased a Nokia 3500 classic in July 2008. I am using 1GB memory card and installing applications on it.
Recently I found that though my memory card's capacity is 1GB, the space utilised was shown as 3.4GB. I was stunned. Then I opened the memory card in computer via usb cable and found that there are lot of .rms files created with junk characters file names and i am unable to delete the files. The only option left to me was format the memory card and I went for that. After formating, I again installed three applications and again i found that the file size of the application itself is increasing by some KBs.
I have scanned it but no virus found.
Why this is happening and what is the solution for it. Please help.

it are the settings of the app(i think) so thas what thay are and the junk charecters make it hidden for EVRY SINGLE FILE MANAGER FOR J2ME(cell phone app)
vinayshah wrote:
I have purchased a Nokia 3500 classic in July 2008. I am using 1GB memory card and installing applications on it.
Recently I found that though my memory card's capacity is 1GB, the space utilised was shown as 3.4GB. I was stunned. Then I opened the memory card in computer via usb cable and found that there are lot of .rms files created with junk characters file names and i am unable to delete the files. The only option left to me was format the memory card and I went for that. After formating, I again installed three applications and again i found that the file size of the application itself is increasing by some KBs.
I have scanned it but no virus found.
Why this is happening and what is the solution for it. Please help.

Office 365 Sharepoint Online with RMS

I'm looking to setup a new SharePoint Online set in Office 365 and implement RMS. I need to know if RMS with Office 365 and SharePoint will protect PDF's and other types of files or just Office files like word and excel?
Vincent Sprague

I'm looking to setup a new SharePoint Online set in Office 365 and implement RMS. I need to know if RMS with Office 365 and SharePoint will protect PDF's and other types of files or just Office files like word and excel?
Vincent Sprague
https://support.office.com/en-au/article/Set-up-Information-Rights-Management-IRM-in-SharePoint-admin-center-239ce6eb-4e81-42db-bf86-a01362fed65c?ui=en-US&rs=en-AU&ad=AU
SharePoint Online supports encryption of the following file types:
- PDF
- The 97-2003 file formats for the following Microsoft Office programs: Word, Excel, and PowerPoint
- The Office Open XML formats for the following Microsoft Office programs: Word, Excel, and PowerPoint
- The XML Paper Specification (XPS) format
-=-=-=-
http://blogs.technet.com/b/rms/archive/2014/08/26/rmsaugust2014update.aspx
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

RMS and XML file

I am thinking of writing a simple application prototype to store customer information with RMS...The thing i want to do is that i want to store the customer information on a xml format or other format will be provide from an external source like PC...the MIDlet just get the XML and make modifications on its local copy....Is it possible to do this??
Anyone kind enough to guide me on this? Thanks...

You can create that application for mobile phones supporting JSR 230: Data Sync API.
~Mohan

Azure RMS

Dear Sir,
I got an experienced for the RMS with iPhone. I have enrolled an account for RMS evaluation from aadrm portal. I have registered two acounts for testing purpose. First of all, I have download the apps from apple store and install
it on my iphone. After installation, I have tried to encrypted the photos through existing photo library. I follwed the instructions to do so. I have two choices and the third choices is dim which is "Custom Permission". The only
two choices "Shared" and "Protected". I am able to encrypt the photo and sent out to the designated users. It returns an error on sharing permission. What is going wrong? On the other hand, is the in placed photo
will be encrpted or not? I have returned to photo library the format remains unchanged.
Secondly, I have registered Widnows Azure. As heard from tecnical engineer-MS, they told me that MS has an Azure RMS dedicated cloud platform. Is it a centralised platform for user management? I would like managed all user in Azure
cloud services. Please let me know?
For the permission assigned, I also have an experience before with PC encrypted document file(s) where I used ms office 2013.
Finally, I woul like to get more Windows Azure information. Can you give me some implementation note and technical requirements?
Regards
Stanley

Hi Stanely,
Some answers for your questions:
" I have two choices and the third choices is dim which is "Custom Permission""
>>> "Custom Permissions" is currently not supported and but will be available soon. It allows you to give permissions to specific people (i.e. email addresses) inside or outside your organization (i.e. account).
>>> "It returns an error on sharing permission."
It is not clear to me what happened here, can you please elaborate? Did the designated user get the sharing permissions when he tried to open the document using RMS sharing app? did it happen on the same device?
>>> "On the other hand, is the
in placed photo will be encrpted or not? I have returned to photo library the format remains unchanged.
When you choose a photo from your Photos gallery, the photo is copied and encrypted using RMS and can be sent in a protected file format (called PFILE).
The original photo in your Photos library app remains unchanged, because it is currently impossible to use RMS to protect the photos that are in your photos library app. You can of course choose to delete the original photo itself after you protect and share
it.
About the rest of your questions,
- Windows Azure provides deep documentation and tutorials which you can find here: http://www.windowsazure.com/en-us/
You can use Windows Azure Active Directory to manage all the users in your organization, as explained there.
Azure RMS is the new RMS technology which RMS sharing app uses. You can build your own applications that uses Azure RMS too. Please refer to the following links to find more information on Azure RMS:
http://blogs.msdn.com/b/rms/archive/2013/11/15/the-new-microsoft-rms-has-shipped.aspx
You might also want to read Azure RMS whitepaper here:
http://blogs.technet.com/b/rms/archive/2013/07/31/the-new-microsoft-rights-management-services-whitepaper.aspx
Best regards,
Yair

Cannot open an file named XPS, stating that i need to in role to view RMS secured document

cannot open file, states that I need to in role, to view RMS secured document.

sdefr0ghsf wrote:
Further to my above reply, I have just discovered this on the web:
Why Adobe doesn't touch proprietary raw files
Touching the bits of raw image formats that aren't publicly documented well (or at all) seems like a bad idea, bound to end in tears. Microsoft is advising customers not to edit metadata using Vista, saying,
Microsoft has received reports of compatibility issues with Nikon NEF files after installing version 1.0 of Nikon's raw codec posted in January. Tagging the raw files through Windows Vista or the Microsoft Photo Info tool after the codec is installed appears to cause these files to become unreadable in other applications, such as Adobe Photoshop. [Via]
I'm sure the problem will get sorted out soon enough, but it does illustrate why Camera Raw and Lightroom insist on using sidecar data files for raw formats other than DNG. It's less convenient, but we've seen far too many conflicts arise from touching metadata in these other formats. DNG was designed with flexible internal storage of metadata in mind, and now Lightroom and Bridge offer conversion to DNG as part of their photo-import processes. (For what it's worth, on my MacBook Pro, converting an 8MP CR2 file to DNG takes roughly 1-1.5 seconds--not a bad price for portability & reduced file size.)
Posted by John Nack at 01:47 AM on February 12, 2007
You will note this this was posed on Feb 12th 2007 and that it appears to still be an issue. Oh dear.
Sure would be nice to see the link to where you got this.
This refers to problems using Microsoft software and Vista, not Adobe software and Vista. I believe it is saying that Adobe properly handles both .nef and .dng files. I have no idea how this quote relates to this thread at all.

How to save an image in png format?

I have modified an image with J2ME and stored this into a byte array, now how can I save this byte array like a png Image??? or anyone format. Class Image have not some method for this task.

you can use rms to save your image. Try to learn it on http://java.sun.com/javame/reference/apis/jsr037/javax/microedition/rms/RecordStore.html

Format of RMS

Similar Messages

Maybe you are looking for