Forum admin and forum user

I have both roles assigned: Forum Admin and Forum User.
Q1. What is the use of this application: Change Admin User? Why everytime I have to set it to my current logged in user? Otherwise I always get No permissions.
Q2. I created a new forum "TEST". But in Forum user role, I just get blank page. What could be the reason.

We had the very same problem.
After the deployment via SDM the iview template was there, but the iview template had a missing parameter: Forum View Target.
Everything was fine, exept the page for the view was empty.
We redeployed the KMC-UI (from the installing doc) and then restarted the portal.
=> all 3 parameters in the iview templates were available
=> Forums view did work fine
Regards Martin

Similar Messages

  • "locked" users  open to non-admin and guest users

    I had this problem a while ago and did a work around that worked.
    When I am on guest or other non-admin users accounts and open hard drive and then users I can access files that should be locked. Mine is the only acct that has a Red slashed circle thru it. My wife's account is also admin but the red circle slashes show up past her icon and some of her folders are open.
    The last time this came up I dragged her open files into the redslashed document file and everything was fine.
    But now my son's file is open to all and this computer is used by many.
    When I do the get information and try to change anything in there I get a message of unexpected error and operation could not be completed message error code 120
    I get this when I try to get information using my admin acct., his non-admin account, or the guest account. Sometimes it asks me to authorize and then an error now it goes right to error
    And the group is listed as admin and read only so it should not be open to all?
    Thanks for you help again with these, to me , befuddling problems
    Barry

    Hi Barry, you need to Repair the HD 1st off with that error code 120 = HFS "Directory not found".
    "Try Disk Utility
    1. Insert the Mac OS X Tiger Install disc that came with your computer, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair. Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    Then we can work on the other problems, if Disk Utility or fsck should fail to repair it, your best bet is DiskWarrior from Alsoft, you'll need the CD to boot from if you don't have another boot drive...
    http://www.alsoft.com/DiskWarrior/

  • Domain Admins and RDP Users can not RDP into Computers (Access Denied)

    Dear All,
    I got some users with Domain Admins Right and Remote Desktop Users Right. But, they are denied to access Remote Desktop services to other servers. I have confirmed that since set up I have no Remote Desktop Related GPO in Domain. I tried to create but issue
    still persists.
    Regards,
    Zaw Tun Naing
    ZAW

    YOu need to track down the machines that are denying the authentication and then look thorugh the member server and DC's to find any events within the Security Event log and post those errors.  This should define ehat specifically is the reason why
    you are being denied.
    One thought, not sure how the service accounts were intially created but someone could have gone into the local security policy and DENIED the right to remotely or locally logon.  Basically only allow to run as a service right.
    http://technet.microsoft.com/en-us/library/cc957048.aspx
    http://www.alexheer.co.uk/it-blog/deny-interactive-logon-for-service-accounts
    Paul Bergson
    MVP - Directory Services
    MCITP: Enterprise Administrator
    MCTS, MCT, MCSE, MCSA, Security, BS CSci
    2012, 2008, Vista, 2003, 2000 (Early Achiever), NT4
    Twitter @pbbergs http://blogs.dirteam.com/blogs/paulbergson
    Please no e-mails, any questions should be posted in the NewsGroup.
    This posting is provided AS IS with no warranties, and confers no rights.

  • Always launching admin and standard user

    I just installed iTunes 8.1.1.10 in a brand nex Vista Home Premium box. I have one admin user and 5 standard users.
    Every time I launch iTunes from a standard user's account, I get the "you cannot oppen the application iTunes because another user has it open" error in the admin account.
    It appears that iTunes is trying to launch in both places.
    Any ideas?
    Thanks
    Joe

    More information would help. Are they not displayed on the login screen or you can't see them in System Preferences?

  • Difference between admin and normal user

    Hi Community,
    how does the user right management works when an admin account is used? In Mac OSX an admin isn't really an admin account  because the user become prompted for the (admin) user password again if he require higher privileges. Microsoft implemented since Windows Vista a similar technique, an administrator account works with a normal user token and if higher privileges are needed, the user will get the UAC dialog to grant higher privileges. This is done by providing the user an admin token temporarily.
    Is this the same way Mac OSX works or is this done by a different technique?
    Thx & Bye Tom

    Hi MrHoffman
    MrHoffman wrote:
    For further reading and improving your knowledge security beyond "root" and "sudo", there are Apple's security guides and the US NSA/CIA operating system security configuration guides.  Both of these resources are a little dated, but the underpinnings of the operating system and its security have not changed significantly; what you learn will still be valid, though there can be some features of newer releases (such as the profile manager, the lack of installed Java) that might be useful.
    Thanks a lot. The link  to the Mac OS security configuration guide seems to be broken but I took a short look into the Linux guide and this is also very interesting, even if I'm not using Redhat but Debian.
    MrHoffman wrote:
    Wo ist die Diskussion, bitte?
    In de.comp.sys.mac.misc but only one posing is interesting:
    Message-ID: <[email protected]>
    And there is only the problem addressed about the difference between an users login shell and an interactive sub shell and how it could be used for privilege escalation by modifying the $PATH variable to execute malicious code with root privileges. I remember this on earlier days in Linux when the actual directory (.) was at the end of the $PATH variable. This could end in the same issue after all.
    Thx & Bye Tom

  • Possible to create separate passwords for admin and main user account?

    Hello,
    My ex wife is going to lend me her Macbook so I can open a separate account to transfer 30K critical business emails from my current Macbook Pro to Mail.app whilst it gets replaced by Apple.
    I still need to work with these emails over the week I'll be left without the computer.
    I was thinking, when requesting to import the mailboxes from my External HD, will it ask for a administrators password?
    She's a bit paranoid about giving me it if that's the case, even though I couldn't give a toss... so is there a way to password protect her main user account with one password, and create another admin password for importing an external mail folder - as OSX sometimes asks for an admin password to install apps etc.
    If I can just use a guest account and import the 'Mail' and 'Mail Downloads' folders from my library to a separate Mail.app on her computer without a password, then great.
    If it's the case the admin password is needed, please let me know ASAP so we can make arrangements for her to hang around to type it in whilst I initially make the transfer - which would be a right royal pain because I'd have to tidy the house up and put some putpourri out and ****.
    TIA

    She can create a new account for you to use. She can set it up as a new Standard account which restricts you from admin privileges. You can use the same username and password as you use on your machine. You will have access to the standard OS X applications such as Mail so you can download your email into a separate account. This can be configured to be exactly the same Mail account you use on your machine.
    Once your use of her machine is finished and you've transferred your data to your machine, she can log into her admin account and delete the Standard account you were using.

  • Distinguishing Admin and Normal User in Content Database.

    Hi,
    I am new to Content Database. I am developing an application using the Content DB API's. Can we distinguish whether the logged user is Normal User or Admin User( User with Admin priviliges) with CDB API's.
    If so please let me know how it is possible. If it possible with any API please mention the API.
    This is very urgent for me. Thanks in advance.
    Thank You,
    Ravikumar.

    Hi Ravi,
    simple alternative would be:
    try{
    //rey to switch to admin mode
    sessionManager.setSessionMode(FdkConstants.SESSION_MODE_DOMAIN_ADMINISTRATION, null);
    sop("U are an Admin user");
    }catch(FdkException ex){
    sop("U are not an Admin user");
    }

  • Sharing Itunes library between an admin and user account on one imac G5

    Hello,
    Please forgive the repetitive question. i have set up an admin and a user account on my iMac. I set the itunes library to users/shared/music/itunes/itunes library on both accounts. The music shows up on the admin account but not the user account.
    Can anyone give a quick step by step including obscure settings that may need to be altered so that I can finally get this pesky stress monkey off my shoulder!
    Thanks!
    iMac G5   Mac OS X (10.4.3)   Ipod video 30Gb

    Hi,
    Someone recently poasted a similar problem as yours.
    Here's the discussion and solution:
    http://discussions.apple.com/message.jspa?messageID=1192454

  • Impossible to set up a TC with admin and users privileges

    Hi,
    Sorry for my english first. I'm not an english speaker...
    That's one week I'm playing with my Tc to try to set it up with admin and users privileges and and doesn't succeed to find a good way to do it....
    What I want to do: set up my Tc so that I'm an admin and can do whatever I want in the folders of each user. I want the user to have access to one folder with their name. Let's say I would like to user my TC like a usual network drive or NAS.
    What I discover: if I enable file sharing with accounts on my TC and define two users user1 and user2 with Read write privileges, user1 can see a folder user1 and put whatever he wants in it and there's a share folder for user1 and user2. BUT I cannot be admin on the TC when account filesharing is on. It means I cannot put anything in user1 folder beacuse I don't see user1 folder. It is just like if you have user accounts on TC you can just change the privileges but not defined an administrator. I'm able to see user1 folder for instance solely changing the filesharing back to secure shared disks "with time capsule password". If i do so I can see all the folders on the TC.
    But it's very annoying because it means that each time I want to put a file inside the folder of one of my user, I have to restart my TC "with time capsule password", put the file, set it up back to user account and restart again the TC.... Not really practical!
    Anyone got an idea how to use the Tc with user accounts (one admin and others users...)

    I forgot to mention that I tried also another method: giving guest access to TC to my two users but there are several problems here: first they can only read (if not they would have the same privileges as me) what means they can put any document in the TC. Second, they see all the folders on the TC and the idea is that they can only see the shared one....

  • Error Logging and notifying users regarding the errors

    Hi..
    we are designing a workflow in which if any user comes across an error (at any branch or while executing an action) must be alerted with the error and must send a notification to the admin that the process has stalled at that particular part of the workflow due to some error.
    my doubts are
    1.how can we notify the admin and the initiator of the workflow regarding the error a particular user gets.i saw in adminui that there are two tabs for the admin to view the stalled actions/stalled branches.but the admin and the user needs to be notified with an alert or email that a particular action has been stalled.
    i think i conveyed my problem in a correct manner.if its confusing then plz tell me coz i am already confused in this..

    Thank you sir for your immediate response of the query.
    In the workflow which we are designing,a service request from filled by the user will be routed to the particular approver and he inturn will approve/reject the form accordingly.once he approves,the form is routed to the service provider who will fulfill the service requested and approved.
    1.Now,for instance suppose that the workflow gets stalled while the form is with the approver.my question is how to notify the user that the service he requested is delayed due to the stalling of the process in between as well as the admin alerting him with the error which stalled the workflow process.
    2.you said that it is easy to setup an email address within the adminui..but i dont know how to do that as i am a beginner.
    3.Also u asked me to specify the errors for which we need to send alerts and email notifications...whatever error that occurs whenever the workflow gets staleld needs to be notified both to the user and the admin (as per our requirements).it would be helpful to us if u give a solution for this.
    thank you..
    Raghava Kumar V.S.S.

  • Oracle Utilities forum was archived and now users are lost

    I really hope a forum admin reads this!
    Oracle Utilities was a very active forum and for some reason was archived and now users can't post there. Consequently Users are now posting Utilities-related questions in random places and they are not getting any replies. e.g. in the Insurance place.
    @admin: can you make sure a new group is created?

    It may be you got no responses here because your questions really belong in other forums:
    Backup:
    http://discussions.apple.com/forum.jspa?forumID=956
    iWeb:
    http://discussions.apple.com/forum.jspa?forumID=1108
    PS Since Backup has a QuickPick for the iWeb Domain file, I am puzzled how you could not find it to back it up.

  • Forum users marked as Guests

    Hi
    I am having a strange issue in SAP Forums Application.
    my Netweaver 7.31 Portal is configured for Multidomain LDAP.
    there are two domain.
    domain_1 and domain_2.
    while users from domain_1 can access the contents of Forums, Users of Domain_2 are not able to access the Forums and are being termed as Guests.
    Another thing which i observed is:
    if i add permission to users from domain_1 in Forum Admin, the users show in the permissions grid.
    whereas if i add permission to users from domain_2 in Forum Admin, the users does not show in the permissions grid and automatically the permissions for registered users are enabled.
    How to solve this?
    Any one faced such issue?
    Regards
    Rajendra

    Solved.
    Note 1965740

  • Forum User iView

    HI All,
    Currently we are Using EP7.0 SP19, I have created the Forum User iView, in that iView property- Target iView Within View on Forums = category.jspa%3FcategoryID%3D37
    Accessing that iView using the portal URL http://server:port/irj/portal it opens the particular category directly and working fine..
    But accessing that iView using Public URL https://www.mycompany.com, it opens the iView with the link "Forum". Not pointing to particular category. Any configuration i have missed out.
    How to resolve this, please help me to achieve this
    Thanks in Advance
    Thillai J

    Hi Aliaksandr Zhukau,
    In order to display a nested iiView within another iView the same protocol has to be used. It is a general browser's security requirement
    I'm not getting your answer clearly.. can u explain in detail..
    Best regards,
    Thillai J

  • Change my forum user name

    Is it possible to change my forum user name?

    It's not a big deal and I don't want to make it so. It's just that it would be nice if there were something in place to deal with situations like mine. I have a MobileMe account now that I have a Mac. There is no way to associate my MobileMe .ME email address with my current profile, and I would like to reconcile that email with my user ID. So, the logic goes, if I could change the user ID associated with my non-MobileMe email, then that would free up my current (and preferred) user ID to be usable with my MobileMe email address.
    Like I say, I'm not trying to make a big deal out of it, but it would be nice if Apple would make some provision to link a MobileMe email with an existing user ID instead of throwing up a brick wall between the two, thus forcing a new MobileMe user (and presumably a new Mac users) from having to choose between continuing to use their established (and presumably preferred) user ID and having to create a new user ID in the forums simply to be able to use their new MobileMe email address.
    That's all I'm trying to do.

  • Another special discount for forum users

    Pssst. If you're not registered for BrainShare yet, and are a forum user, watch the BrainShare banner at the top of these forums on Monday August 22nd for a special deal.
    As you already know, if you register before the end of August, you get $100 off the price of a BrainShare pass. IN ADDITION, on Monday, if you click on the banner and follow the instructions there for registration, you will get an ADDITIONAL 10% off. That's two discounts in one. The BrainShare team here at Novell is really interested in getting the techies here in the forums to the conference. Keep in mind this is for new registrations only. You can't go back to Walmart when they have milk on sale and ask for a refund of the difference because you bought milk last week at the regular price. That's why I'm giving you this advance notice. Monday is the day. Get your ducks in a row so you can register then. I hope to see you at BrainShare...it's always a fun, educational party!

    Today is the day. Click on the banner above for the double discount.

Maybe you are looking for