Found Bug on Printing System!

Hi People,
i bought and installed leopard on my G5.
I've got 2 printers on my lan: HP 2600n (network attached) and HP LaserJet 1200, attacched and shared to a linux server.
I had no trouble to install hp 2600n: it was recognized via bonjour and installed troublessly.
With Tiger, the cups shared printer showed in printer list, with no settings done.
With Leopard, insted, it does not show.
I've tried to set-it-up by hand, writing the IPP address in the right box, but with no results: it did not work.
The only way to configure the printer has been via cups browser interface: i connected to localhost:631, and configured printer via browser.
Now the printer works very well... but i had to configure it by hand, while with tiger was all automatic.
i wrote it to help some other mate that has the same trouble.
Happy Leopard!

Thanks! I have a HP LaserJet 1100 connected to an old XP machine that I have been sharing on my network for years. When it would connect at all, Leopard would get about 15% through a test page and announce that there was a problem connecting to the printer. I tried authenticating as a guest and with a password. I could see the printer but never print. This tip had me up and running in a minute. I didn't know that there was a browser interface. For other newbies, I used Safari and navigated to 127.0.0.1:631. From there it was self explanatory and the printer installed and prints flawlessly.
Thanks for this tip.
Rick

Similar Messages

BUG! Not system locale Filenames support for 32-bit applications error in Windows 8.1 x64 and other microssoft x64 OS-s.

BUG! Not system locale Filenames support for 32-bit applications error in Windows 8.1 x64.
All Windows x64 (XP,2003,2007,Vista,7,8) have no support for not system locale filenames|foldernames for all 32-bit applications. I think it is BUG!
For example, it is possible to read files|folders with French or Chinese in English locale windows installed, rename it, but it is not possible open it, edit or delete. (ERRORS: File not found OR Unknown format)
With using 64-bit programs no such problems. How does it works and how can I fix this? Is it problem with encoding in translating kernel instructions for 32-bit apps in x64 Windows OS's? Whether there are
solutions to this problem OR some hacks|fixes?

Hi,
Have you installed the language package for French or Chinese?
If no, please download the language package and install them.
To download language package, please click the link below,
http://windows.microsoft.com/en-US/windows/language-packs#lptabs=win7
Best Regards.
Steven Lee
TechNet Community Support

Just installed the latest Canon printer software update (V 3.2) from the App store. Canon Pixma MX850 will not print. Dialog says job stopped at the server - no pages found. Utilities, print test page works. Printing via Airport.

Just installed the latest Canon printer software update (V 3.2) suggested by the App store in effort to get printer working after OS update. Canon Pixma MX850 will not print. Dialog says job stopped at the server - no pages found. Utilities, print test page works. Attempting to print via Airport from a MacBook Pro. Also from a Mac Pro via ethernet. Both worked before updating to Yosemite. Canon Pro 9000 Mk 2 works via USB. Tried installing driver 10.84 from OS 10.9 as suggested by PAHU; no luck.

The "stopped at server - no pages found" message would suggest an image with the print file that is created by the printer driver on the MacBook Pro. But if the Mac Pro is getting the same message then that is unusual.
To rule out a couple of causes I would try connecting the MacBook Pro directly to the MX850 by USB cable. This action should result in a new printer for the USB connection being created automatically. If not then you may need to manually create it as you won't be able to use the existing printer that exists for the network connection. With the new printer created see if this will let you print without error.
If this USB connected printer also fails with the same message then try a reset of the printing system. Note that this action will also remove the Pro 9000 from Printers & Scanners so you will have to add it and the MX850 again.

Premeire CS6 & photoshop "codec not found" bug fix

I recently started using premiere cs6 & found that if i import layerd photoshop file as a sequence save it & close the application. File does not reopen. i searched sevrel forum but did not found any satifactory solution.
I did dicovered a workaround. check steps below:
1. Import photoshop file as sequence
2. open sequence with all the layers-> Copy all the layers
3. Make a new sequence & choose appropriate preset ie resoluton & codec of project
4. paste all the layers in new sequence.
5. MAKE SURE you delete photoshop sequence that was made when importing .psd
It will work---
I have made a video if you dont understand the steps
https://vimeo.com/channels/jeetstevenson/56192205
premeire cs6 & photoshop codec not found bug fix from kamaljeet on Vimeo.
Premeire CS6 & photoshop "codec not found" bug fix

I did a search on my system and found the Photoshop has a fastcore plug-in. Creative Cloud includes a subscription version of CS6 version 13.1.2. I do not know if you installed that or not. The cc un-install may have done something. You may need to use Adobe Cleaner then Install The Perpetual CS6 version of Photoshop CS6 version 13.0.6 Mac or Photoshop CS6 version 13.0.1.3 PC and not the subscription CS6 extended version 13.1.2. Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 If you need to download the CS6 installer Download CS6 products.
You may also be able to recover your cs6 using an old system backup
fastcore.8bx on my system...

How to print system-time in XML?

Hi,
Please help me how to print system-time in XML. Like we use sy-uzeit in ABAP.
Can we use anything in XML too..
Thanks & Regards,
Sai

hi movilogo
Please try this.
Create hidden item P1_DATE
Create On load process in page 1 and put this code
begin
:P1_DATE:=TO_CHAR(SYSDATE,'DD-MON-YYYY HH:MM:SS');
end;
Open your region in Page 1 put this code in Footer area
*&P1_DATE.*
Refresh your page.
you will get the output like this.
16-SEP-2009 11:09:17
thanks
Mark Wyatt

Error Print system failed. HP OJ 6500A

Hi,
The moement I switch the printer on it goes through it motions an end get stuck on the printing system has failed. Error code 0x.....0022. Going through the forum and lot of googling I do not get a definite solution to this problem. I do not want to chuck the printer away as I have a whole set of new cartridges and I believe it is a small problem to the printer. I will appreciate any help from real HP technicians. Can somebody please help? And btw.... this is not my first printer that I am fixing so please, you might get technical and skip the replace, reset part of any advice.

Hi there @Teebos, welcome back!
I read your post about the Ink System Failure message you are faced with on your Officejet 6500A. I am going to post you all of my suggestions to try for the issue that could be "possible" solutions.
'Ink Cartridge Problem' Message Displays on the Product Control Panel
'Problem with Printhead,' 'Printer Failure,' 'Ink System Failure,' or a '0x...' or a 'C2...' Error M...
Bob Headrick's "Soaking the Printhead" (please read his instructions if you chose to try this step)
If the troubleshooting does not help at all, I would lastly suggest technical support.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Good luck!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Printing System Date on Report Title

How can I print the system date on the title of report generated by SQL*Plus?
I remember it is possible to include SQL.PNO in the statement TTITLE to print the page number. Is there any variable like SQL.PNO which represent system date?
Previously I've include SYSDATE to the SELECT statement of the report. It is the column named TODAY, with option NOPRINT and NEW_VALUE TT_TODAY, where TT_TODAY is include in TTITLE statement. The problem is: if the SELECT statement returns nothing, TT_TODAY will be blank/Null.
How can I work around with this problem?

Dear all,
My colleague told me the way to print System Date on title of SQL*Plus report as followed:
COLUMN today NEW_VALUE tt_today NOPRINT FORMAT A1 TRUNC
TTITLE CENTER tt_today RIGHT SQL.PNO
SET FEEDBACK OFF
SET TERMOUT OFF
SELECT SYSDATE AS today FROM DUAL;
SPOOL RPTFILE
SELECT ....... << to generate report output >> .......
SPOOL OFF
SET TERMOUT ON
SET FEEDBACK ON
It works! The output file contains System Date on each page title.
I don't understand why Oracle didn't implement variable similar to SQL.PNO to represent the System Date. If Oracle is able to create SQL.PNO which can increment on each page break, why not the System Date which remains the same on each page?

My external hard drive (1TB WD My Book Essential) suddenly has no room to backup with Time Machine! I am using Maverick OS and wondered if it is because of a bug in the system software.

My external hard drive (1TB WD My Book Essential) suddenly has no room to backup with Time Machine! I am using Maverick OS and wondered if it is because of a bug in the system software. I purchased a new external drive with 3 TB and wonder if I will run into a problem installing it. I don't know how to transfer my files from the previous HD to the New one. I was told to use a cable, but how do I do it? Do I connect them both to the computer and drag the old into the new? How is it done? Why did this happen, the overloading of the Time Machine?

Why has the TimeMachine drive run out of space?
With the limited amount of information you've provided it is hard to answer this question. TimeMachine should continue making backups until the drive is full and then it should erase the oldest backup(s) to retrieve enough space for the next backup. Unless your computer's hard drive has close to 1TB of space on it, you shouldn't see a message saying TM cannot backup because it is full. However if you do have more than 500GB (1/2 a TB) then I can see how that message might occur. Also, if you are using the TM drive for double duty (backing up more than one computer or storing data other than TM) you could get that message.
Will you have this problem with a 3TB drive?
I always recommend that people look at how much they'll be backing up in total, add a bit extra for the future, and then multiply that by at least 1.5 and even better to double it. That indicates how large the TM backup drive should be. The TM drive should only be used for TM backups. It is ok to use one drive to back up more than one computer but if doing so, add up the contents of all the computer drives, adjust for the future and then double it.
Moving Forward
Disconnect the old TM drive for now. Connect the new drive and let TM do its job. I don't recommend that you try to transfer the TM backup from the old drive to the new one. Keep the old drive around for a couple months just in case you find you need it and then after a few months, if you like, you can erase it and use it for something else.

CS Print system and ML 10.8.2

My university is using CS Print (formerly sold by http://universities.cbord.com/solutions/) which I run in my 27" iMac/Mountain Lion labs on WindowsServer 2003 Dells to provide the means for students to swipe their ID cards and pay for printing. We use HP printers.
We've been using this system for a few years now, and originally getting it set up in the first of four labs nearly required a team of NASA and Cal Tech engineers an entire semester to make it work (I only exaggerate slightly). I was not involved in choosing this particular workflow, but have to somehow keep it running with the help of several people.
The early problems with this system involved students needing to authenticate multiple times on the Mac (running Snow Leopard) before the job would show up on the Dell's screen. If I changed toner in the printer or had to reboot it or the Dell, that somehow reset the system and the next person to print would need my admin password entered to unpause the printer. That would usually fix the problem for the entire lab.
We've also had students' cards give a bogus "no funds" error (or say they were many thousands of dollars in the negative), or (even to this day) the print system charges a single 10 cents regardless of number of pages printed.
My current biggest problem running Mountain Lion 10.8.1 and now 10.8.2 involves each workstation saying the printer is paused and a print operator needs to enter a password. Doing so every time someone prints is obviously impractical, but once done, it's like an enema for the print cue and a long list of jobs builds on the Dell's screen. At that point sometimes people can print the jobs, sometimes not.
The authentication problem returns repeatedly, even on the same workstations where the admin password was entered, and is causing everyone exasperation.
As a Mac person I have no patience with obsolete POS Windows software, but as I said, this is what our campus uses.
I would like to hear anyone else's experience with CS Print and how one deals with the authentication errors, especially. I understand Pharos.com makes what looks like a viable alternative (UniPrint) and would like to hear from those using it so I can pass on the info.
PS: Lion seemed to have issues with network logins which I solved by going to Mountain Lion. But even ML 10.8.2 still "Addresses an issue that may prevent Active Directory accounts from being locked out". I wonder if this is part of my problem?

Similar pause issue here, running on 10.8.2, authenticated against a Windows 2008 server, with mostly HP's on campus, and only HP's having this issue. We use PaperCut to monitor and charge for printing, however.
We're still testing, but an upgrade of the firmware on our printers has helped thus far (two days). Worth a shot.
Please keep updating - I feel better knowing we're not the only ones!

TS3147 Since my last update for Mac OS X Lion 10.7.5 I have been unable to print to either my HP or Lexmark printers! Everything is connected but I get an "idle" message in the queue. I have "Reset printer system" and re-added these printers. No luck. H

Since my last update for Mac OS X Lion 10.7.5 I have been unable to print to either my HP or Lexmark printers! Everything is connected but I get an "idle" message in the queue. I have "Reset printer system" and re-added these printers. No luck. Help?

Hello,
It isn't the fw in Network you want o use or look at, that's for something completely different.
My first suspect is the Power Adapter on the LaCie has gone.
At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware>Firewire, what is listed there?
Reset the Firewire bus
If your Firewire or USB isn't recognizing any device. A solution which has worked for some whose hard drive became invisible in 10.4 was simply to follow these four steps to reset the Firewire/USB bus:
1. Shut the machine down.
2. UNPLUG the power lead to the computer and any firewire/USB drive or devices.
3. leave it for 10 minutes.
4. Connect back up and reboot.
http://www.macmaps.com/firewirebug2.html

Reset Printing System does not exist on my computer!!!

I have been trying to get my HP PSC 2175 to print and working with HP support to do this. It just prints out blank pages. The last thing they sent me was to Reset the printing system using the Printer Setup Utility. And they sent me to the below link:
http://docs.info.apple.com/article.html?artnum=301185
For whatever reason, the "Reset Printing System" DOES NOT EXIST on my computer. I actually sent screen captures to show them. The first showed my
version of the Printer Setup Utility (3.0) and the second showed the
Printer Setup Utility menu - with no such option. I am running OS 10.4.4 and have all of the updates. I even opened the Printer Setup Utility holding down the "option" key.
Does anyone know how to reclaim this feature???
thanks
eric

After all of the emails back and forth with HP, I have really only done two things: A complete manual uninstall - which is a royal pain in the butt. That is worse than any uninstall with windows, and way worse than Class MacOS. Then they kept trying to get me to Reset the Printing system - which is what I can't do.
I upgraded to Tiger via a DVD - straight from the box. I had 10.3.x, bought Tiger and upgraded. I have since updated it via the website. I think what I just installed was the combo updater - but I don't think it really did anything as I had already done that.
If there is a better way to go, please let me know. I searched all over Apple's site for just that piece of the printing system, but unlike the old OS, there doesn't seem to be a way to download those components.

Acrobat 9 bug with printing problems

Hello, Acrobat 9 seems to have a bug when printing pdf files. Only the first page is printed. I tried on my Kyocera 2525E and my HP 2600N. Does anyone know a solution ?

This seems to be a known issue Peter. There are certain models of Kyocera and Canon printers which will only print the first page. As Mike suggested the issue will only be resolved with an updated driver from the printer manufacturers or an update to Acrobat 9. You might try Print As Image in the Advanced portion of the Print dialog. It is a checkbox at the top of the Advanced dialog. Good Luck!

My Xperia Z2 is with BUG in the system, help me please.

Good Morning.
My Xperia Z2 is apparently with a BUG in the system. I customize the entire desktop by creating folders and reducing screens work, so my interface is more organized because I have many applications. The problem is that when I do any customization of the folders and everything I do on the screen when I put it to load immediately starts a video demo of the device and when I return to the desktop all I've done is lost and comes back as factory .
Please help because I am that with unit 3 days and I'm already frustrated. I did the last update (17.1.2.a.0.314).

yeah i know i told you to reapir your phone using PC Companion ok not a hardware..this is a software repair..
Do not forget to give kudosand to select the correct answer

8900 printer changed black cart. error code problem with printer system

Changed black cartridge in 8900 series all in one printer error message says trouble with print system call HP. Have removed and reinstalled catridge still same error message. HELP!!!!!

Hi @melvinc
Welcome to the forums
I read about the issue you are facing on your printer, as it's now showing a problem with the ink system. I cannot locate a "8900" printer, could you possibly have the Officejet 8600? If so, please try out the steps from the guide below. If you reach a step where it asks to replace the printhead or printer, call us directly to see what your replacement options are with HP.
A 'Problem with Ink System' Error Message Displays on the Control Panel or Computer During Setup
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Have a great day
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

I can't see my Canon MG5220 printer... Initially I was getting "there is a communication error" so I rebooted everything, reset the printing system, reinstalled the driver and still NO luck! It seems to see the scanner, but never the printer. HELP!

I can't see my Canon MG5220 printer... Initially I was getting "there is a communication error" so I rebooted everything, reset the printing system, reinstalled the driver and still NO luck! I see no printers available in the Print & Scan area. If I click "+" it seems to see the scanner, but never the printer. HELP!

The printer component uses a different protocol to advertise itself on the network compared to the scanner component and it can take several seconds longer to appear after the scanner has.
That said, with the introduction of AirPrint, the MG should be seen as Bonjour Multifunction in the Add Printer window, as shown below.
Selecting this Bonjour Multifunction entry will create a printer using AirPrint and a scanner using the iCA driver.
So do you see the MG5220 as Bonjour Multifunction or just Bonjour?

Found Bug on Printing System!

Similar Messages

Maybe you are looking for