Frequency of Blinking for LED in LV

Dear All,
We are using the blinking property of the LED and the text in our project, now whenever this propery gets the true, it always blinks on one frequency, but we want the different frequencies to blink, is there any option to do so? the blink always have the color yellow, is there any other options to change the color property of that?
Thanks,
Nishant

Paul, you should remember that this should not be only for booleans, as other controls can also be blinked.
Also, you should note that changing the value is only legitimate when the LED is used only for display. If it's a real variable, you need to work on its Colors[] property and write a polymorphic VI which will support this for other controls (using the BGColor property). Personally, I think it would be coolest if we wrote a VI that would dynamically call a VIT which would control this seperately. This way, the VIs could be integrated into the code just like regular property node. The problem with that is that there will be a need for some sort of repository for holding the references to which controls we already opened the link to. Also, we would need to check on changing values wired into the "property VI" (like Blinking, Speed and Color). That sounds like a nice project. Maybe when I have some time.
Obviously, the best solution is having the built in property node support this properly.
Try to take over the world!

Similar Messages

Solution for blinking yellow LED despite the fact it works

I've seen a bunch of questions/comments about frustrations about having blinking yellow LEDs even when everything seems to work.
Here's how to fix this:
1) Launch AirPort Utility
2) Select your base station in the list at the left
3) Select "Manual Setup" from the "Base Station" menu.
4) When you get the summary, there will be a little Yellow LED in summary (not talking about the list on the left). Click on it!
5) You will now see a list of the problems causing the base station consternation and you grief because little blinky LEDs drive you folks nuts. Some of the problems listed here should be addressed and some of them are because you deliberately chose to configure your base station this way.
6) Fix any issues listed that sound ominous.
7) For any remaining issues, check the "Do not show this warning again" if you don't want the base station to worry about the issues you don't care about. (For example if you insist on using "public" for your base station password and having an open network, bless you...I love free wireless)
If you see warnings about IP Addresses, bad disks, missing cables, etc. you probably should fix it.

Strangely, when I look at the Utility, all hardware has a Green dot.
But the Extreme is still blinking yellow.
The only problem I am having currently is the connection to the attached HD is dropping occasionally, requiring a reboot.

BlackBerry 8110 does not initialize only LED blinks for 5 secs

Hi all,
I bought a used BlackBerry 8110. It worked fine in the beginning - then during some audio recording I suddenly got an hourglass cursor and the handy was frozen.
Removing the battery - even for 24h - did not help. The moment I put in the battery the LED starts shining for approx. 5-6 secs, then it extinguishs for 2-3 sec, and so on. Thats all what happens. The display remains black.
I also tried to re-install the complete device operating system but without any success. But when installing the OS the ApploaderWebSL-Upgrade.msi was able to communicate with the handy and determines the installed software components and versions. Also the LED blinking stopped (LED was off) and the Apploader was able to delete all software installed on the device and write the new software. When that finishs and the Apploader tries to initialize (reboot) the handy the blinking described above starts again but the handy (and display) remains off.
Does anyone have an idea what to do ???
Any help is appreciated !!!
Thanks a lot,
Katja

try this
Solution number 1
http://blackberryfaq.com/index.php/How_do_I_wipe_the_BlackBerry_using_Jl_Cmder%3F
Solution number 2
http://blackberryfaq.com/index.php/What_to_do_next_if_Jl_Cmder_will_not_connect_and_wipe
Good Luck

My wechat app's LED notification ( red color ) only blink for 3 times :(

I'm facing a problem in wechat app where the led notifications only blink for 3times, after that it stops. Whereas all led , notifications are 'On / enabled' . Hope anyone can solve me this issue, thanks .

thanks for the reply
actually it's more than a year, and the warranty already ended.
some technicians told me it might be the battery. Honestly, i have no idea about the PB's battery. Does it comes with one major battery or dual or so on.
Really frustrated now, and wishing a miracle... (

When charging my laptop and laptop is off, charging led blinks for 3 or 4 times then start blinking

i have hp dv7-3183cl, when i put my laptop on charging and its turned off, charging led blinks for 3 or 4 times then it starts charging, what it means

Hi,
I don't know people call this but we normally call it as an "handsake", all smart batteries should do this way.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Toshiba Lax blinking yellow LED

After witnessing a short 110V power failure while my 42HL67US T/V was in operation, power was restored and the yellow LED is blinking on a three blink/pause pattern. I have tried the unplug/replug attempt and the reset T/V by pressing and hold the control panel for the 5 second time period+ and had no response, the yellow LED continues to blink.
The T/V is installed in my RV, very seldom used, in the like new condition. Are there any other checks I can do before I pull the T/V and contact a repair tech or buy another T/V?
I see where other folks had similar problems and wonder what their fix was? I'm not a highly qualified electronic type so any input would be deeply appreciated.
Thank You
Tony

That blinking yellow LED simply indicates that the TV is trying to boot. Unfortunately, I don't know what's wrong with it, and there's no easy way to check. It may require servicing.
- Peter

My apple TV displays an apple screen, and blinking white LED, only LED responds to remote inputs. I reset with remote ...same result....Any ideas?

My apple TV displays an apple screen, and blinking white LED, only LED responds to remote inputs. I reset with remote ...same result....Any ideas?

If they are the instructions I think you might have seen, they are for the Apple TV 2.
Unfortunately I think your Apple TV may have failed.
You might try removing ALL the cables for a while and trying again, but I think you may be out of luck.

Wont turn on /blinking red led

Hi all, have my xperia z3 for about two weeks, not rooted, not unlocked, without any modifications. Yesterday before sleep it was with more than a half of akku, today as im woke up and got it in my hands it was off, im plugged charging cable, was thinking maybe the battery was drained, but nothing happens still, its just blinking red (led).
Was trying to hold power + volume up, nothing.
Reset key near sim dont works for me either - i'm just notice 3x vibrations and thats it, its just repeat vibrate 3x times again and again but nothing happens, no boot.
Solved!
Go to Solution.

You may need to perform a software repair using PC companion.The process will erase all internal memory.You might need to charge your device for about 1-2 hours before so the device has at least 60% battery.
Make sure the device is not connected to computer or laptop and turned off (sometimes you have to press power button and volume up until the device vibrates 3 times or on some devices you have to press the small button near the SIM tray or on the back of the device).
Open PC companion->support zone->phone/tablet software update->repair my phone/tablet blue highlighted.Follow the steps given,do not connect your phone until prompted to press volume down while plugging USB cable. If PC companion does not start the repair process, you might need to run it in compatibility mode with Windows 7 (in some cases XP).
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

Black screen with cursor blinking for a long time before loading windows 7

Hey guys, i'm having an annoying problem with my macbook pro... i installed windows 7 using bootcamp and now i get a black screen with cursor blinking for a long time before loading windows... it *****, it takes about 3 minutes to get my notebook running
The first time i installed windows seven i did not have this problem... i already deleted the partition several times and installed windows again, but the black screen problem is still happening. i don't know what do
You guys have any tips? anyone with the same problem?? this ***** a lot. thanks

Hey Theoos..
Yeah, my version is not.. the first time i installed it was ok, but after 30 days it was asking for a key... then i installed a cracked version, and the cursor started blinking on start up, and took like 2 minutes...
I tested several cracks but with all of them happened the same.
Thanks

FP-AI-110 Blinking Ready Led

Hey all,
I have purchased a second hand FP-AI-110. I am trying to test the unit out by swapping it in place of another (active and working) FP-AI-110, but the new (to me) unit only blinks the READY Led when plugged in. This is on an FP-1600 'network'.
Any thoughts? Is there any special configuration that must be done to the module before use? If so, how?
Thanks in advance,
Ian

Hi IonH,
The modules are hot swappable and since you are swapping in the exact same model you shouldn't have to redo the configuration file. The blinking Ready LED indicates that there is an error condition so it could be that you have a bad module. To make sure it isn't a problem with the controller you can swap back in the original FP-AI-110 to ensure that it is still working, and if possible try the non working one on a different controller.
<Brian A | Applications Engineering | National Instruments>

Sun Fire X2100 Blinking Status LED...

We have 3 new Sun Fire X2100 servers at my current job. Just recently the status LED (orange) started blinking. The logs show fine and running a prtdiag shows everything up and running fine. Is there a way to turn off the blinking LED? I have gone over every piece of information I can find and have found nothing about how to turn this off once it has started blinking.

This may be one of two issues:
- There's a know ILOM/nge driver bug in eariler releases of S10 x86 (pre 6/06).
- There's a know issue with an older firmware rev of the BIOS/LOM where the net management port hangs/drops out and triggers the blinking fault LED. Do you know what BIOS revision you are at?
Most times a mobo swap is NOT the fix. You may be making the problem worse because we have mobos in the supply chain with older firmware revisions.
On the X2100's I usually have my customers try:
- Moving the RAM in different slots
- Updating the BIOS/LOM firmware
- Running the PC-Check diags
... before I send a field tech out to do major surgery.

My iPhone apps wouldn't open they just blink for a second and the home screen comes back again...i tried installing a free app from the AppStore but it didn't work and also tried resetting the iPhone but ddnt work as well please help what do i do??

My iPhone apps wouldn't open they just blink for a second and the home screen comes back again...i tried installing a free app from the AppStore but it didn't work and also tried resetting the iPhone but ddnt work as well please help what do i do??

Oh my gosh I had the EXACT same problem, and for ages I couldn't figure out how to fix it until today. Here's what I did:
First I went onto my computer, opened itunes, and un-installed tumblr, vine and kik. These were the apps I was having problems with (it said I had them on my phone but, like you, they didn't show).
Then I went to the itunes store, searched for each one, and it said I could update them so I did (just FYI: for tumblr a window popped up saying "please click ok to confirm you are 17 years or older", so I did that also)
When I went back to my phone and tried installing them again (still on my computer), it worked!
I hope this helps, because it was incredibly frustrating. Good luck!

Frequency of use for an ABAP object ?

Hi all,
i need in ABAP to get the frequency of use for an ABAP object like a program or function module. For example, for a program i would like if it's used often (by week, by month, day) or not.
Cheers.

Hi,
You can use transaction STAT or STAD for finding the statistics of usage regarding report or transaction.
You can also use the Function module <b>SAPWL_WORKLOAD_GET_STATISTIC</b> for getting the statistics of reports executed.
You need to get the dir from Function module <b>SAPWL_WORKLOAD_GET_DIRECTORY</b> and loop through the dir returned by the and pass the dir(internal table ) fields to the Function module SAPWL_WORKLOAD_GET_STATISTIC for getting the details
Hope this helps.

I am using apple iPod-suffle model and I am unable to upload music into iPod and 3 lights(green,orange and red) keeps blinking for few seconds when I connect my iPod to my PC and after few seconds its turn to unresponce mode,Plz help to find out solution

I am using apple iPod-suffle model,I am unable to upload music into iPod and 3 lights(green,orange and red) keeps blinking for few seconds when I connect my iPod to my PC and after few seconds its turn to unresponce mode,Plz help to find out solution.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

[SIS Series] 66FM2 Mainboard - Blinking Power LED? Why??

I searched and found a vagiue reference to an underpowered power supply. I have a new Ultra 500 Watt ATX supply! How can this be?
Information Please!

Quote from: blazing storm on 26-October-05, 00:29:50
What is the exact spec of that power supply?
Please post details found on side of power supply.
A power supply isn't just about the wattage, the + rails are VERY important. You need to post your system details so we know whether the power supply is up to the job too. Post it as a signature (in your profile).
Well, then, therefore, is the blinker for the Power Supply???
500W ATX Supply:
Steady State current: - 10A
Cold Start Current - 50A
Efficiency - 70%
+5 = 30A max...
+12 = 34A
+3.3 = 28A
-5 = 0.3A
-12 = 0.8A
+5VSB = 2A
Peak Surge Current = 15 sec
Max out Watts = 480W
Voltage Hold Up Time = 10ms
Need any more data?

Frequency of Blinking for LED in LV

Similar Messages

Maybe you are looking for