FT3 Error: Event Buffer(s) Overflowed(s)

Error last DNP3.0. To that it must this error?

Hi Vlady_1
I have answered to your post in spanish in the following url:
http://forums.ni.com/ni/board/message?board.id=6170&message.id=1260
I hope this helps you.
Have a nice day
Francisco Velasco

Similar Messages

FT3 Error: Buffer(s) Overflowed(s)

Saludos, pues me gustaria que me dieran una mano con este error.Yo ocupo el CBX del DNP3.0 de Lookout para obtener telemetrias de relevadores como el SEL 311C, REL512, etc. y para hacerlos funcionar ocupo una version antigua de dicho driver. Hace unos dias baje la ultima actualizacion de ese DNP y me da el error: FT3 Error: Event Buffer(s) Overflowed(s) y con la version anterior que ocupo no me da tal problema. Pues mi preocupacion radica que con el ultimo DNP puedo sacar los datos del CPU1000 pero no de los equipos antes descritos y necesito obtener los datos de todos los equipos que menciono. Asi que si alguien me puede ayudar se los agradecer mucho.

Hola Vlady_1!
Gracias por acudir a los foros de NI en espanol
Tu problema se debe probablemente al tamano del Buffer que estas manejando, por default se
asigna un valor de 100 y es posible incrementarlo hasta 1000. El error se debe a que al llenarse
el buffer los eventos mas antiguos son descartados y es cuando marca el error. Existe un valor
minimo en el buffer que debes tener para que dicho error no ocurra, en la siguiente liga que te
anexo, viene el manual de DNP 3.0, alli se especifica cuales son los registros que debes modificar
para incrementar el tamano del buffer:
http://www.dynatrolsys.com/support/downloads/M02cfg-v3.pdf
http://www.kalkitech.com/index/Kalki%20Gateway%20Lite-DNP3.0%20Serial%20Slave%20Protocol%20Details.p...
Espero esto ayude a resolver tu problema.
Cualquier cosa estamos en contacto.
Francisco Velasco.

Error "Event Queue Overflowed" with the "Write file to Citadel Server"

Hello,
I can import data from a file and I can see the data
in the historical database without troubling.
But I always have this error "Event Queue Overflowed", that don't perturb my data and my application (I have just this boring message).
I have tried many things :
- increasing the size of my input buffer (-> 1.000.000, no change) : I don't think so that it's important because I've tried with a value of 100 and anyway sometimes my application works with this small value of 100.
- increasing the File_location tag size (-> 260). No change.
- My write to Citadel.cfg is in the LabVIEW folder.
Can you help me ?
Thank you.

Hi,
What version of LabVIEW DSC are you using? if it is 6.1, have you applied fixes linked below.
http://digital.ni.com/softlib.nsf/websearch/513AA4A0BB60D10086256B48006D44B5?opendocument
I have seen a similar issue at the link below.
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RNAME=ViewQuestion&HOID=5065000000080000008C640000&ECategory=LabVIEW.Datalogging+and+Supervisory+Control
Please let me know if you have read it through?
Best Regards,
Remzi A.

Acpid random crashes: netlink read error - no buffer space

Recently acpid has been randomly crashing on my system:
acpid.service - ACPI event daemon
Loaded: loaded (/usr/lib/systemd/system/acpid.service; disabled)
Active: failed (Result: exit-code) since Sat, 18 Aug 2012 13:51:02 +0200; 7h ago
Main PID: 295 (code=exited, status=1/FAILURE)
CGroup: name=systemd:/system/acpid.service
Aug 17 22:55:29 arch acpid[295]: input device has been disconnected, fd 17
Aug 18 09:55:27 arch acpid[295]: client 353[0:100] has disconnected
Aug 18 09:55:27 arch acpid[295]: client connected from 353[0:100]
Aug 18 09:55:27 arch acpid[295]: 1 client rule loaded
Aug 18 13:50:38 arch acpid[295]: netlink read error: No buffer space available (105)
Aug 18 13:50:41 arch acpid[295]: netlink read error: No buffer space available (105)
Aug 18 13:50:56 arch acpid[295]: netlink read error: No buffer space available (105)
Aug 18 13:51:00 arch acpid[295]: netlink read error: No buffer space available (105)
Aug 18 13:51:02 arch acpid[295]: netlink read error: No buffer space available (105)
Aug 18 13:51:02 arch acpid[295]: too many errors reading via netlink - aborting
I have no idea what this means, i don't see other mentions of it on the forums/flyspray and Google mainly seems to list generic code commits.
Perhaps anyone of you has a clue?

joseperezc wrote:
Hi, maybe is something related to this?
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=661344
systemctl enable acpid.socket
that fix it?
Hmm no that's not the problem unfortunately, i can start the daemon without problems, but it just crashes now and then after a while (sometimes more than a day after it was started).
why you are using acpid ?
Because my laptop exposes most of it's special keys (lid, brightness, volume etc) as acpi events, and i need a simple way to capture and script those.
and seriously why you are using acpid ?
Because my laptop exposes most of it's special keys (lid, brightness, volume etc) as acpi events, and i need a simple way to capture and script those.

Error adding buffer entry when using Asynchronous mode of JRA and JCO call

Enviroment: XMII 12.1.4 / CE EhP1 SP03
When I using SAP JRA Function Call or SAP JCO Funciton Call in transaction, it works well when I choose 'Process Type' as 'Synchronous processing' in 'Data Buffering Configuration' tab. But when I use 'Asynchronouse processing' it doesn't work.
I check the Netweaver logs, there some logs like following:
Error adding buffer entry (com.sap.xmii.dataqueue.DataBufferManager)
Couldn't add buffer entry (com.sap.xmii.dataqueue.DataBufferManager)
ManagedConnectionImpl.dissociateConnections(), dissociation of a non-cci transaction, H1, C1(com.sap.mw.jco.jra)
how could I solve this problem?

Solved after deploy 12.1 SP05 (xMII 12.1.5 build 91)

SSMS Intermittent error - "Error message is: SqlDateTime overflow"

SQL 2008R2(10.50.6000) Standard Edition, 64 Bit on Windows 2008R2 SP1 Enterprise.
SSMS 10.50.4033
From time-to-time (several times per week) I receive the following error when running a query from SSMS.
"An error occurred while executing batch. Error message is: SqlDateTime overflow. Must be between 1/1/1753 12:00:00 AM and 12/31/9999 11:59:59 PM."
This happens on small single statement queries, large complex admin queries, ad hoc queries, queries that I have source controlled and tested/run many times. I have exhaustively checked the target tables and don't find any dates out of range.
Typically, I just rerun the query and it runs fine.
Another error that occurs less often is
"An error occurred while executing batch. Error message is: Non-negative number required.
Parameter name: count"
This is particularly confusing since I don't have a parameter named "count" which is an illegal T-SQL identifier anyway.
The references to "SqlDateTime" and "count" lead me to believe this is an SSMS coding error.
Ray

Unfortunately, without a scenario to repro the issue, it is impossible investigate. And overall, intermittent errors are horrendeously difficult to troubleshoot.
What I would recommend is that you install SSMS 2012 SP2. You can download it for free here:
http://www.microsoft.com/en-us/download/details.aspx?id=43351
You can run SSMS2012 against SQL 2008 R2 without problem, and personally I find it nicer to work with.
Not that I am sure that it will resolve the issue.
Erland Sommarskog, SQL Server MVP, [email protected]

CrystalReportViewer: "Missing parameter values with implemented error event

I'm using the CrystalReportViewer in APS.net (C#), and try to display a report in it.
I've implemented the error event of the viewer to show the user a different error message than the viewer itself does.
         this.CrystalReportViewer.Error += new CrystalDecisions.Web.ErrorEventHandler(CrystalReportViewer_Error);
      protected void CrystalReportViewer_Error(object source, CrystalDecisions.Web.ErrorEventArgs e)
         var msg = "Error in CrystalReportViewer\r\n{0}".FormatInvariant(e.ErrorMessage);
         throw new InvalidOperationException(msg);
But.... Now if I want to show a report that has parameters in it, the parameter page does not appear before the report itself. How can I make my code work (without removing the implementation of the error event), so the viewer first shows the parameter page, before showing the actual report?

And in the Page_Load method:
this.CrystalReportViewer.Error += new CrystalDecisions.Web.ErrorEventHandler(CrystalReportViewer_Error);
I've done this so i can show my own error page to the user of the website. Otherwise the CRViewer shows his own error, and I do not want the user of the website to see this 'technical' error.
So i've implemented the CrystalReportViewer.Error method:
protected void CrystalReportViewer_Error(object source, CrystalDecisions.Web.ErrorEventArgs e)
   // Missing parameter values.
   var discardToShowParameterPrompt = (e.ErrorMessage.ToUpperInvariant() == "Missing parameter values.".ToUpperInvariant())
     || (e.ErrorMessage.ToUpperInvariant() == "Ontbrekende parameterwaarden.".ToUpperInvariant());
   if (discardToShowParameterPrompt)
      _Log.Debug("The parameter screen should be displayed now.");
   else
      var msg = "Error in CrystalReportViewer: {0}".FormatInvariant(e.ErrorMessage);
      throw new InvalidOperationException(msg);
If I load a report with no params in the report, the page shows immediately the report.
If I load a report with params in the report, the params page is shown, the user can enter the param values, and after pressing OK, the report is shown.
If an error occurs (for example the report cannot connect to the database), the viewer does NOT show the error (because i've implemented the _error event) but my code throws an InvalidOperationException, and this is handled by code so the error is logged to a file, and the user gets a user friendly message on the website.
If i do not implement the _error event, the user will see the technical error in the crystal reports viewer.
If I comment out the code where I'm looking for the string "Missing parameter values." (or "Ontbrekende parameterwaarden") the parameter page will not be shown, and an error will be thrown by the Crystal Reports viewer.
If I put e.handled = true in the _error event, and there is an error (for example the database cannot be found), no error will be thrown, and there is nothing to see in the viewer.
So for now the only way to get the params page is to implement the _error event the way i've done in the above code, checking the error message on a string value.

Adobe Acrobat 8 Pro Application Error Event ID 1000

Version: Adobe Acrobat 8 Pro (Updated)
Operating System: Windows XP (Sp2)
Launch Adobe Acrobat 8 Pro
Select File and open a PDF file
Popup appears: Reading Untagged Document
Then and error appears ... Adobe Acrobat 8.1 has encountered a problem and needs to close
Also receive same error when I select Edit\Preferences
Application Event log contains the following:
Application Error Event ID 1000
Faulting application acrobat.exe, version 8.1.0.137, faulting module admplugin.apl, version 3.16.128.32, fault address 0x000a7bf1.
Have uninstalled and reinstalled application...no change
Any help would be apprciated

No, I have not.
Had another laptop and used it.
Re-imaged laptop exhibiting the issue and moved on
Edward Bailey | Network Administrator | Pizza Inn, Inc
t. 469.384.5231 [email protected]

Quorum/Witness Disk Offline every 15 minutes error - Event ID 1069 - Event ID 1558

2 node active passive, 2008 failover cluster. I keep getting the following error events:
The cluster service detected a problem with the witness resource. The witness resource will be failed over to another node within the cluster in an attempt to reestablish access to cluster configuration data. Event ID 1558
Cluster resource 'Cluster Disk 1' in clustered service or application 'Cluster Group' failed. Event ID 1069
However my quorum disk is online from what I can see. One thing I did notice is, the Quorum disk no longer has any files in it. It is just a empty drive.
I also noticed these errors are being entered every 15 minutes exactly.
I monitored the Quorum disk and it is going offline momentarily every 15 minutes.
Experts Exchange Posts indicate this is known issue and waiting for microsoft to deliver SP2? Really?
http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Server/Windows_Server_2008/Q_24751092.html
Any thoughts

support.microsoft.com/kb/2750820 - This does not resolved your issue because it applies only to the Quorum model Node and File share majority.
The issue is because of the cluster configuration corruption and cluster I checking after every 15 minute and is seeing the cluster quorum disk in failed state (actually it is not failed) but is not able to update the current state of the quorum disk.
Check for below logs in the cluster logs:
00000d84.00000f58::2014/11/18-19:04:06.805 INFO [QUORUM] Node 1: Witness Failed Gum Handler [QUORUM] Node 1
00000d84.00000f58::2014/11/18-19:04:06.805 INFO [QUORUM] Node 1: witness attach failed. next restart will happen at 2014/11/18-13:19:06.797
00000d84.00000ef8::2014/11/18-19:04:06.805 INFO [QUORUM] Node 1: quorum is not owned by anyone
Try reforming the cluster, it will resolve the issue.
Change the quorum model to Node majority and back to node and disk majority.
Stop cluster service on all the nodes and then start them back when it is stopped on all the nodes.
Thanks
Himanshu Swarnkar (MSFT)

Event Source: Application Error Event ID: 1000 (F1Server.exe)

Hi.
We regulary have an Application Error with "faulting module ntdll.dll" (see below).
And we can't find what is the problem.
Can you help us?
Windows Server 2003 R2 Eneterprise Edition Service Pack 2
[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Windows Server 2003, Enterprise" /noexecute=AlwaysOff /fastdetect /PAE /3Gb
Event Type: Error
Event Source: Application Error
Event Category: (100)
Event ID: 1000
Date: 1/11/2014
Time: 10:33:47 PM
User: N/A
Computer: MS-GARANT001
Description:
Faulting application F1Server.exe, version 7.9.0.0, faulting module ntdll.dll, version 5.2.3790.4937, fault address 0x00060c17.
Data:
0000: 41 70 70 6c 69 63 61 74 Applicat
0008: 69 6f 6e 20 46 61 69 6c ion Fail
0010: 75 72 65 20 20 46 31 53 ure F1S
0018: 65 72 76 65 72 2e 65 78 erver.ex
0020: 65 20 37 2e 39 2e 30 2e e 7.9.0.
0028: 30 20 69 6e 20 6e 74 64 0 in ntd
0030: 6c 6c 2e 64 6c 6c 20 35 ll.dll 5
0038: 2e 32 2e 33 37 39 30 2e .2.3790.
0040: 34 39 33 37 20 61 74 20 4937 at
0048: 6f 66 66 73 65 74 20 30 offset 0
0050: 30 30 36 30 63 31 37 0060c17

Hi,
This issue may be caused by corrupted files or application conflicts. I recommend you to run "sfc /scannow" at the command prompt to check the system files. In addition, you can perform a clean boot to see if any service is causing the issue.
If the above cannot solve it, maybe you can find if there is any hotfix for the application or uninstall the application.
Best regards,
Susie

System ERROR EVENT WARNING : ORACLE.APPS.AR.HZ.CUSTACCOUNT.CREATE

Hi,
When Customer is Created / Updated using Receivables or TCA APIs in Oracle Apps 11.5.10, all registered Business Events are firing and subscription code (PL/SQL Rule Function) is executing successfully.
In Administrator Workflow window, Notifications tab showing System Error: Warning Message for all the events which are subscribed.
eg:
"System: Error Event WARNING : oracle.apps.ar.hz.CustAccount.create /
oracle.apps.ar.hz.CustAccount.create62829 " Warning Message.
Please advice.
Thanks and Regards,
Vijay

Whenever there is a requirement of raising a Business Event due to some custom activity, you should call wf_event.raise to do this.
Just google to see the parameters you need to pass it while calling it.

Disk Error event ID 153

Receiving disk error event ID 153 in Server 2012 - The IO operation at logical block address 0x0 for Disk 1 was retried. Does this error mean something is wrong with the hard drives?

Possibly. Run chkdisk to see if it turns up something.
. : | : . : | : . tim

Error events 31551 and31552 only during the night

events error 31551 and 31552 started show up for some time every night 00:00 to 08:00 “SQL exception timeout expired... timeout period elapsed prior to completion... “
Also 16 events warning 2115 showed up in between the 31551-315522.
At all time we have many warnings 29202,
If not closely monitored our rms health service stops working ... "Staled" state
No backup runs on SQL db. DBs are backed up by sql on another lun that is backed up by Tivoli tsm.
No antivirus on Db.
The SCOM db have been moved 3 weeks ago on from SQL 2k5 to SQL 2008 r2 sp1.
My SQL admin found out that the SQL is generating lots of i/o (not all on disk, some in memory...) over 1 Tb of data every night for some time... During the day DW db size is 74062,56 MB
We moved SQL data and log folders on different luns, DW on its own lun. We moved the Datawarehouse on another lun, it made no difference.
The datawarehouse lun has long latency during the night, up to 15 sec.
No new MP installed in the past 8 months, only few overrides and disables recently
Our scom setup is 2007r2 cu7, rms on 2k3sp2, ms (acs) 2k3sp2 and ms 2k8sp2, 1 gateway in a dmz on 2k8 sp1 . Setup dated 2008 and 2011, all virtual Esx and approx. 150 agents.
From what we have read it seems to be related to performance, however we are unable to find root cause of issue.
Can you please help us determine what causes these error events to show up at night only...
Summary of error events follows:
Event Source: Health Service Modules
Event Category: Data Warehouse
Event ID: 31551
Date:  04/06/2014
Time:  08:00:31
User:  N/A
Computer: MMTRLPALPINF033
Description:
Failed to store data in the Data Warehouse. The operation will be retried. Exception 'SqlException': Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
One or more workflows were affected by this.
Workflow name: Microsoft.SystemCenter.DataWarehouse.Synchronization.Relationship
Instance name: MMTRLPALPINF033.Prod.MJQ.Local
Instance ID: {0F390614-0505-F7C2-49A3-128862BF520E
Workflow name can also be "Microsoft.SystemCenter.DataWarehouse.Synchronization.ManagedEntity "
One 31551 with following description
Failed to store data in the Data Warehouse.
The operation will be retried. Exception 'SqlException':
A transport-level error has occurred when receiving results from the server.
(provider: TCP Provider, error: 0 - The semaphore timeout period has expired.)
Event 31552
vent Type: Error
Event Source: Health Service Modules
Event Category: Data Warehouse
Event ID: 31552
Date:  04/06/2014
Time:  07:08:45
User:  N/A
Computer: MMTRLPALPINF033
Description:
Failed to store data in the Data Warehouse. Exception 'SqlException': Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
One or more workflows were affected by this.
Workflow name: Microsoft.SystemCenter.DataWarehouse.StandardDataSetMaintenance
Instance name: Performance data set
Instance ID: {3EC423BE-5714-81B5-AA64-29A3E158A7B6}
Management group: OPSMGR_P
Event Type: Error
Event Source: Health Service Modules
Event Category: Data Warehouse
Management group: OPSMG
The 31552 was mostly with Instance name: Performance data set
Some with Instance name: event data set or state data set and some with the RMS server.

Hi,
You have moved the database to a new SQL server. What is the collation on the new server? Only SQL_Latin1_General_CP1_CI_AS is supported. Please check free space in the SCOM DB's and transaction log DB.
Same issue here, please refer to this one:
http://social.technet.microsoft.com/Forums/systemcenter/en-US/9be98791-1f41-4563-990f-0e5d622e7955/scom-2007-r2-failed-to-store-data-in-the-data-warehouse-exception-sqlexception-timeout?forum=operationsmanagergeneral
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Amfphp - flex remote object error event handler

I'm using amfphp and I want it to return an error that the flex remote object error event handler will pick up. At the moment I can get only the result handler to do anything in flex.

Hi,
Try throwing an exception in the remote method. For example,
function inverse($x) {
    if (!$x) {
        throw new Exception('Division by zero.');
    else return 1/$x;

Error Event ID 103 on publishing server

Hello everyone
I started migrating my environment from App-V 4.x to App-V 5.0
I installed one App-V Management Server and one App-V Publishing server, I created a new group called App-V Admins which includes all the App-V administrators and the machine accounts of both servers and I added it to the local
administrator group on both of the servers so they will have full permission on each other
the management server seems to work fine but the publishing server get
AuthenticationFailed when I navigate to http://localhost:82.
on the event viewer of the publishing server I see the Error Event ID 103.
as a workaround I tired to install the Publishing role on the Management server and there - everything works fine and I can publish packages to clients without any issues.
firewall is disabled on both servers so there's shouldn't be any block
I re-installed the publishing server, changed ports... everything I could think of... I still get that annoying error
my environment is a bit restrict in general because it's a finance organization, so permissions on DC are not widely open but still, I even tried to add permissions on my DC's root for App-V Admins and it makes no difference.
anyway, following TechNet, there's no special permission request so I don't even know if that's the problem
anyone with ideas?
thanks
Tamir Levy

Hi Sayareddy,
What operations did you do when you met this issue?
Whether you created some event receviers in your SharePoint.
Please provid access to nt authority\authenticated users group in the master page gallery as read.
Repairing SharePoint installation, compare the result.
If this issue still exists, I suggest you install the latest CU to check if it works.
Here are some similar posts for your references:
https://technet.microsoft.com/en-us/library/ff382637%28v=office.14%29.aspx?f=255&MSPPError=-2147217396
https://social.technet.microsoft.com/Forums/en-US/45690250-9c63-49b8-96ea-fe471568e5ad/event-6875-error-help?forum=sharepointadminprevious
Thanks,
Wendy
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

FT3 Error: Event Buffer(s) Overflowed​(s)

Similar Messages

Maybe you are looking for

FT3 Error: Event Buffer(s) Overflowed(s)