Ftp Adapter switching off

Hello,
My bpel process receives files from FTP Adapter (get), but when there is no file in incoming dir, it switches off automatically and the following message appears in the console:
<2006-05-16 19:48:31,186> <ERROR> <default.collaxa.cube.activation> <File Adapter::Inbound> FTPClient.listNames(): unexpected 450 is encountered.
I tested the same process connecting to other ftp server and it runs ok.
The directory permissions are ok, because I can put, get and delete files using a ftp client.
Any ideas about what is going?
Thanks
Rogério
Message was edited by:
[email protected]

Yes, it is an issue with BPEL.
Patch 4508850 should address this issue.
Thanks,
Sachin Sutar

Similar Messages

File Adapter BPEL Process getting switched off

The file adapter BPEL process reads a csv file which has a series of records in itfrom /xfer/chroot/data/aramex/accountUpdate/files. In between reading the files, the BPEL process gets switched off. The below snippet is the error we found in the domain.log. Anybody can you please suggest what to do?
<2010-11-25 16:22:28,025> <WARN> <PreActivation.collaxa.cube.ws> <File Adapter::Outbound>
java.io.FileNotFoundException: /xfer/chroot/data/aramex/accountUpdate/files/VFQ-251120101_1000.csv (No such file or directory)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:106)
at oracle.tip.adapter.file.FileUtil.copyFile(FileUtil.java:947)
at oracle.tip.adapter.file.inbound.ProcessWork.defaultArchive(ProcessWork.java:2341)
at oracle.tip.adapter.file.inbound.ProcessWork.doneProcessing(ProcessWork.java:614)
at oracle.tip.adapter.file.inbound.ProcessWork.processMessages(ProcessWork.java:445)
at oracle.tip.adapter.file.inbound.ProcessWork.run(ProcessWork.java:227)
at oracle.tip.adapter.fw.jca.work.WorkerJob.go(WorkerJob.java:51)
at oracle.tip.adapter.fw.common.ThreadPool.run(ThreadPool.java:280)
at java.lang.Thread.run(Thread.java:619)
<2010-11-25 16:22:28,025> <INFO> <PreActivation.collaxa.cube.ws> <File Adapter::Outbound> Processer thread calling onFatalError with exception /xfer/chroot/data/aramex/accountUpdate/files/VFQ-251120101_1000.csv (No such file or directory)
<2010-11-25 16:22:28,025> <FATAL> <PreActivation.collaxa.cube.activation> <AdapterFramework::Inbound> [Read_ptt::Read(root)]Resource Adapter requested Process shutdown!
<2010-11-25 16:22:28,025> <INFO> <PreActivation.collaxa.cube.activation> <AdapterFramework::Inbound> Adapter Framework instance: OraBPEL - performing endpointDeactivation for portType=Read_ptt, operation=Read
<2010-11-25 16:22:28,025> <INFO> <PreActivation.collaxa.cube.ws> <File Adapter::Outbound> Endpoint De-activation called in adapter for endpoint : /xfer/chroot/data/aramex/accountUpdate/files/
<2010-11-25 16:22:28,095> <WARN> <PreActivation.collaxa.cube.ws> <File Adapter::Outbound> ProcessWork::Delete failed, the operation will be retried for max of [2] times
<2010-11-25 16:22:28,095> <WARN> <PreActivation.collaxa.cube.ws> <File Adapter::Outbound>
ORABPEL-11042
File deletion failed.
File : /xfer/chroot/data/aramex/accountUpdate/files/VFQ-251120101_1000.csv as it does not exist. could not be deleted.
Delete the file and restart server. Contact oracle support if error is not fixable.
at oracle.tip.adapter.file.FileUtil.deleteFile(FileUtil.java:279)
at oracle.tip.adapter.file.FileUtil.deleteFile(FileUtil.java:177)
at oracle.tip.adapter.file.FileAgent.deleteFile(FileAgent.java:223)
at oracle.tip.adapter.file.inbound.FileSource.deleteFile(FileSource.java:245)
at oracle.tip.adapter.file.inbound.ProcessWork.doneProcessing(ProcessWork.java:655)
at oracle.tip.adapter.file.inbound.ProcessWork.processMessages(ProcessWork.java:445)
at oracle.tip.adapter.file.inbound.ProcessWork.run(ProcessWork.java:227)
at oracle.tip.adapter.fw.jca.work.WorkerJob.go(WorkerJob.java:51)
at oracle.tip.adapter.fw.common.ThreadPool.run(ThreadPool.java:280)
at java.lang.Thread.run(Thread.java:619)
<2010-11-25 16:22:28,315> <ERROR> <PreActivation.collaxa.cube> <BaseCubeSessionBean::logError> Error while invoking bean "cube delivery": Process state off.
The process class "BulkAccountUpdateFileConsumer" (revision "1.0" ) has not been turned on. No operations on the process or any instances belonging to the process may be performed if the process is off.
Please consult your administrator if this process has been turned off inadvertently.

This patch is not for 10.1.3.1.
I have provided a response to on the following post
BPEL Process Going into Dead State Automatically.
cheers
James

Computer switches off while uploading

I have been making some changes to
http://www.lerosdiving.com/diving_pics.htm
and the template.
When I went to upload the pages 3 minutes in, the computer
made a humming
noise for a moment and then switched off (WinXP Prof, DW8 no
updates).
I restarted, tried again, same thing. Restarted, left the
computer running,
ran virus checker (AntiVir) with no adverse results and
uploaded images 3 at
at time (ftp via DW). PVII IGM btw. No problem at all. Tried
uploading
thumbnails folder, computer switched off.
I uploaded the whole of the site a bit at a time with no
errors or problems
this way.
Nothing else seems to be causing the PC to switch off in this
way. Does
anybody have the remotest idea what might be causing this?
[Two things: the PC does seem to have been running somewhat
slowly over the
last couple of days but obviously may have no bearing on the
issue.
Secondly, there was a power cut which trashed my usb drivers
yesterday
including hub (no mouse/keyboard, had to use adapter). I
uninstalled and
reinstalled them and all seemed fine ]
Jo

Thanks Ian, I do indeed have an AMD processor. It's sitting
here without a
cover at the mo (PC) as I haven't had a chance to clean it
out yet. Son
visiting from UK, friends arriving tomorrow - aargh! when oh
when...
Jo
"Ian" <[email protected]> wrote in message
news:[email protected]...
> Try using task manager and see how much processor usage
you are making.
> Also what processor are you running? Some of the AMD
units are known for
> running very hot when under load. If in doubt fit a new
processor fan and
> see what happens
>
> cheers
>
> Ian
> "Josie1one" <joleros[nospam]@yahoo.com> wrote in
message
> news:[email protected]...
>> Thank you all so much for your comprehensive replies
- I really
>> appreciate it.
>> Tomorrow I am going to do everything you all
suggested - starting with a
>> thorough spring-clean, dust-buster, defrag, the lot.
>> Back in the 70s when I started working with
computers, we worked in a
>> completely dust-free environment, false ceilings and
floors. Amazing - my
>> poor little computer!
>> Thanks again.
>> Jo
>>
>> "Josie1one" <joleros[nospam]@yahoo.com> wrote
in message
>> news:[email protected]...
>>>I have been making some changes to
>>>
http://www.lerosdiving.com/diving_pics.htm
and the template.
>>> When I went to upload the pages 3 minutes in,
the computer made a
>>> humming noise for a moment and then switched off
(WinXP Prof, DW8 no
>>> updates).
>>> I restarted, tried again, same thing. Restarted,
left the computer
>>> running, ran virus checker (AntiVir) with no
adverse results and
>>> uploaded images 3 at at time (ftp via DW). PVII
IGM btw. No problem at
>>> all. Tried uploading thumbnails folder, computer
switched off.
>>> I uploaded the whole of the site a bit at a time
with no errors or
>>> problems this way.
>>> Nothing else seems to be causing the PC to
switch off in this way. Does
>>> anybody have the remotest idea what might be
causing this?
>>> [Two things: the PC does seem to have been
running somewhat slowly over
>>> the last couple of days but obviously may have
no bearing on the issue.
>>> Secondly, there was a power cut which trashed my
usb drivers yesterday
>>> including hub (no mouse/keyboard, had to use
adapter). I uninstalled and
>>> reinstalled them and all seemed fine ]
>>> Jo
>>>
>>>
>>
>>
>
>

My Iphone 4 only charges when is switched off and it's not recognized by Itunes and Mac

Hello guys!! Please help me if someone knows what should I do. My iphone was working perfectly so far but a couple of days ago it stopped charging, its not charging neither with the a/c adapter and with the usb through my pc. It says device not recognized.. Today I had my iphone switched off and tried to see if it was charging and actually it was! But it didn't show that it was actually charging (the battery icon with the bolt didnt appear..but after 3 hours it was fully charged..but this happens only when its switched off..so i cant connect on itunes and i cant charge it while its turned on!! If someone knows please help!!!!!
I tried different cables and different computers and nothing. I can't restore because it's no recognized...
Thanks a lot!!

Hi, my iphone 4 was working fine a couple of days ago, but suddenly i plugged the device to my laptop and after a while i realized it wasnt charging, i have tested on a lot of computers but i got the same issue, even on a mac but its not detected.
So finally i turned off and after a while i realized the phone was fully charged, at least i found a temporary solution to this problem but its really anoying to switch off to charge the phoen, if you solve this problem please let us know, apple should fix this problem.
As you can see there is no charging logo when the phone is connected

I have a 1st Gen, MacBook Pro from 2006. For the last few years I've had to us my power adaptor as my battery no longer works. Now my power adaptor looks like it's coming to an end. Even though it's securely fitted, it often switches off.

I have a 1st Gen, MacBook Pro from 2006. For the last few years I've had to us my power adaptor as my battery no longer works, and shuts down after 30 seconds it. Now my power adaptor looks like it's coming to an end. Even though it's securely fitted, it often switches off.
I am planning on buying a new MacBook Pro later this year, but for the meantime I'm not sure if I should buy a new power adaptor, or if this is a problem with my MacBook Pro. Also does anyone know where I can buy a battery in the UK for 1st Gen MacBook Pro.

OWC has batteries for 1,1 generation MacBook Pros and they ship internationally - http://eshop.macsales.com/.
Your best bet for a power adapter is to get one from Apple. Third-party adapters just don't seem to be reliable (or safe). You can also buy a replacement battery directly from Apple, of course, but they're a bit more expensive.
Good luck,
Clinton

Windows 7 hangs and switches off network access

We are running a Windows 7 Ultimate 32-bit operating system as our server.
About on 30 minute intervals the computer hangs and switches off network access.
If the computer is in this state and you try and access it from another computer nothing happens.
While in this state you can see the desktop indicating that it's not in sleep mode.
The problem is rectified by click the mouse on the computer.
It has not gone into a sleep mode as everything on the power options is set to never.
Please help?
Regards,
Andries Malherbe
Vizier Systems

About on 30 minute intervals the computer hangs and switches off network access.
If the computer is in this state and you try and access it from another computer nothing happens.
Could you plaese share more information about "switches off network access" with us? I don't quite understand this situation
Please also check the event viewer to collect related information about this issue when you re-use the Windows 7.
Meanwhile, Please update the driver for network adapter or reinstall for a test.
Regards
Yolanda
TechNet Community Support

ESB FTP Adapter Help

Hi
I am switch from TIBCO products to Oracle so I am kinda lost. Sorry if these questions are too newbie.
1. Is it possible to configure multiple FTP adapters polling files from various FTP sites? I think it s a YES. Can you tell me how? I need to perform polling of files from 3 different FTP sites and interval of x mins then to trigger other processes
2. If I were to create a manager sitting in front of these adapters to specify how these adapters works, how do I that? Meaning instead of specifying what is the host etc.. It can be done at front end application
Thank you

Hi,
1) with respect to how, check out the SOA Suite Adapters guide that is available here: http://download-uk.oracle.com/docs/cd/B31017_01/integrate.1013/b28994.pdf (assuming you use version 10.1.3.1).
Basically:
- Define the FTP Adapter services using a wizard
- Specify connection data for your FTP services in a config file
Hth, Sjoerd

What is the maximum filesize for a FTP Adapter?

I have xml files with 1000's of records to read in. The file size can range anywhere from a few MB up to ~100MB. Most of them are about 50 MB.
The FTP adapter works when I have a small file, but with larger ones it apparently times out. Once it runs into a big file like this, it won't process any more files until I restart the process. It doesn't show any faults or even any record of a running instance in the BPEL Console, so I have no idea specifically when it breaks. I uploaded a 10MB file to my ftp server and left it for a half hour, but nothing showed up, so I'm assuming it's broken rather than just taking a long time.
What is the maximum file size for a FTP adapter? Can I change this somewhere? I looked in the ...\application-deployments\default\FtpAdapter\oc4j-ra.xml file but couldn't find any settings to change.

Well no luck on my end and it doesn't look like anybody else has any ideas either. This thread Re: FTP Adapter, Java Embedding, ... says that if you can't get the functionality you need out of the default one, you should write your own FTP adapter in JCA. I looked at JCA and would like to write a simple polling adapter and then put all my FTP code in embedded java.
Can somebody explain how I could achieve the basic FTP Adapter polling functionality in JCA? I'm having difficulty figuring out how to have an ongoing polling process without instantiating a BPEL process itself, like the existing FTP adapter does. I don't want to set off on writing my own adapter if it's going to be a much larger undertaking than I have time for.
Also, is the source code open for the default FTP adapter? It would be great if I could just modify the few things I need to change rather than write one from scratch.

Receiver FTP Adapter Problem

Hello. My scenario is: A file is sent from R/3 via RFC, then from XI to an outside system using the FTP adapter. The RFC part is working, but I've encountered some errors with my FTP adapter. The file is not being created in my directory at all and this is the error message I'm getting:
- 2006-10-11 08:28:20 CDT: Error: Message processing failed: Exception: ftp access error: com.sap.aii.adapter.file.ftp.FTPEx: 552 transfer failed
Can anyone help, please?
Thank you.
Nicole

Hi Nicole,
A few things you might check are:
1) The Ip address given is correct.
2) The login details given in File receiver adpater are right
3) The server is running when you make the transfer, that is 'Allow logins' status is checked in case of guild FTP server or similar servers.
4) The destination directory is given as "/root" with "/" slash.
5) All the firewalls are turned off.
6) File processing mode is 'Create'.
Cheers,
Ashish

When display switches off I can't get it back without forced restart

When display switches off due to low battery power & I can't get it back even when I plug in to the mains and have to force the PC to restart.
Is there a pref somewhere to disable this?

Hello
When the display goes off exactly? How much capacity has battery at this time? 5%? More?
Try to set this to higher level.
When you work with your notebook and battery level comes to low battery level and the alarm alert will be shown in task bar but you will be able to continue your work several minutes or to connect AC power supply.
I am afraid your notebook reaches critical battery level and then is maybe too late for any action.
Set Low battery level to 10% and when the notification is shown connect AC adapter immediately.
I presume the display must not be off at all.

10.1.3.4 - FTP adapter error while file get

I created an esb service that reads from a remote server and processes the file locally. It works fine in dev. When I migrated my esb flow to a test environment it is now throwing some error.
<AdapterFramework::Inbound> Adapter Framework instance: OraESB - successfully completed endpointActivation for portType=Get_ptt, operation=Get
<FTP Adapter::Inbound> Connection Created
<FTP Adapter::Inbound> Unable to list files from '/apps/EDI/Archive/OutBound/Customer' directory on 'corpapp10' server; FTP command[NLST] returned unexpected reply code : 550
<FTP Adapter::Inbound> Poller raising Alert for exception : ORABPEL-11430
Error in listing files in the remote directory.
Unable to list file in remote directory.
Check the error stack and fix the cause of the error. Contact oracle support if error is not fixable.
The dev remote server and the test remote server are different. I have done the obvious checks about server name, permissions, directory names etc. I can login to the server using windows ftp however when I go the inbound directory and type in ls, i get the following error - 550 Arguments too long. I have some 37000 files in the directory. ls -l works fine.
I switched the ftp adapter to poll a different directory which only has 1 file, but it still gives the same error. However in this case, the windows ftp is able to list the files using ls command.
any idea how i can make this work ?

i undeployed the esb project and deploying it again. Now even worse, nothing happens now. It has stopped polling at all. I just see the following message in the opmn.log, but none of the files get picked up.
<FTP Adapter::Inbound> Connection Created
<FTP Adapter::Inbound> Connection Created
<FTP Adapter::Inbound> Connection Created
To be sure, I deployed it to another environment (DEV) and it works ok there.

BPEL process with DB adapter and FTP adapter

Hi ,
i need to read a table contents using DB Adpter after recieving the data i need to write a swich condition on column value of each record and dependin og the criteria i need to write the record in an appropriate file
can any one help me out by giving any similar reference BPEL process
regards,
Anasuya Vemuri.

Hi,
Configure the DB Adapter as a service in your composite which does polling the table in the DB, there are many settings in polling, make your selection according to your business needs. Configure the FTP Adapter as a reference in the Composite. And use switch activity inside the BPEl if you want to check something like if else cases. And invoke the FTP Adapter and before that populate the invoke input variable values using assign activity copy operation. Make sure you create connection factories for both adapters and populate the important attributes for them in the SOA Admin Console.
http://kr.forums.oracle.com/forums/thread.jspa?messageID=9784730
Hope this helps....
Thanks,
N

Issues with FTP adapter

Hello,
I m facing issues using the FTP adapter. I am using 10.1.3.1 standalone installed in my desktop.
1) The FTP adapter doesnt poll continuously for the files. It dies off as soon the folder is empty. If there are incoming files after sometime, the BPEL process fails to pick them. I created an empty BPEL process that has a recieve activity from an FTP adapter as partner link
2) The files are fetched and deleted but are never archived, despite setting the archive files. Can we not archive those files in another folder of same FTP server ?
3) Sometimes, the files are deleted, but there is no activity or process shown in the BPEL console.
Can you please help me with these issues
Thanks
Harinath Gandhi

Are you able to upgrade to 10.1.3.3. A lot of issues with adapters are solved in this release.
Marc
http://orasoa.blogspot.com

File size restriction on FTP Adapter (GET)

A customer has deployed a BPEL process that we had created that uses the FTP Adapter to download (GET) files. The customer is reporting that when they try to download a large file (about 800 MB in size), the process does not seem to kick in for more than one hour. At this point I don't know how good or bad the network speed is and how long a FTP download will take for a file of that size. But before looking into that, wanted to know if there is any restriction on how big a file can be for it to be downloaded by the BPEL FTP Adapter. If not, is there some way to find out what is wrong with the downloading or to know to progress of the FTP GET?
The user guide talks about increasing the value of transaction-config timeout in server.xml for the File Adapter. Is this applicable for FTP Adapter also and will it work if I increase this?
Thanks in advance for your attention.
Jay

Thanks for the pointer. The processes are deployed on a 10.1.3.5 instance.
Of the info I found in that article, only the following seemed applicable:
53.2.1 Setting Audit Levels from Oracle Enterprise Manager for Large Payload Processing
I can ask the customer to turn off auditing if it is on. But I am skeptical that this will resolve this issue.
The following seem to be applicable only to 11g version and I am not sure if they have any corresponding options in 10.1.3.5 (please let me know if I am mistaken):
1. 53.2.4 Using Adapter Support for Streaming Large Payloads
2. 53.2.6 Processing Large Documents in Oracle B2B
Section 53.3.1 Opaque Schema for Processing Large Payloads says the following:
There is a limitation when you use an opaque schema for processing large payloads. The entire data for the opaque translator is converted to a single Base64-encoded string. An opaque schema is generally used for smaller data. For large data, use the attachments feature instead of the opaque translator.
Based on your experience, has the FTP Adapter ever been used to download files of 800MB or larger size on a 10.1.3.5 instance? I would like to know if there is any insurmountable system limitation with this approach or is it just a question of proper configuration or is this a bug that the FTP adapter product team can look at. I assume the attachment feature is not available in 10.1.3.5.
The remaining sections don't seem applicable to the the customer scenario.
Can you please explain what ODI is?
Appreciating your input,
Jay

BPEL FTP Adapter problems

Hi!
I have two problem using the FTP Adapter in a BPEL process.
The first can be described as follow: I have a BPEL process that incapsulates the FTP Adapter and it is deployed correctly on the BPEL default domain. It's working fine in a normal context with no error. Now I want to simulate a "read FTP Server" crash; so I put the FTP Server from which I'm reading off-line. When the GET module of the FTP Adapter tries to poll the server, it generates a Null Pointer Exception and on the server command window I can read, after a while, that the process state will be set to OFF. But when I enter in the console I always see the state ON! But the interesting question is: is there an automatic way to recovery the process and to restart it? I see that in the domain parameter there are two values: rcvAgentDelay (7200) and rcvThreshold (600). I tried to set them to some other values, for example (120) and (10), but the process still remains "blocked" and no new polling seems to happen.
The second problem is about the creation and the deploying on a new domain. I create a new domain called "bulk" and I tried to deploy my process on it but I can't do it due to the generation of many exception! Can I deploy a process with a FTP Adapter component inside on a domain different from the default one? And if the response is positive, like I think, can you summarize the most important steps of it and if I must configure some specific domain parameters?
Thanks a lot,
Busnelli.

OK, firstly I want to thank both of you, Rakesh and Maneesh.
Here are the details requested:
Operation System = Windows XP Pro SP2
BPEL Process Manager = 10.1.2
BPEL Server version = 2.2 (build 1361)
JDeveloper version = 10.1.2 (build 1811)
BPEL Designer version = 10.1.2 (build 050322)
Usually after any modification I'm used to restarting the BPEL server.
Today I have downloaded the "Oracle JDeveloper 10g (10.1.3) - Developer Preview" (I think to be the Post Beta 3) and as soon as possible I will try to use it.
Thanks to both!

Ftp Adapter switching off

Similar Messages

Maybe you are looking for