FTTC Box in on the road, awaiting availability...
Hi there.
I've been eagerly awaiting Infinity for months now... My horrible 3.5 meg connection is driving me insane, since I download so many game off of Steam and the like.
I think the FTTC box began to be installed in early October last year, and I often saw people working on the box. However, for the last 4-5 weeks, I've seen next to no activity at any point on the box (I can't be certain) and I really want to know when I'm likely to get the new connection :/
I don't really know what I'm waiting for, pretty damned sure I should be on the box, it's next to the box around... 100 meters down the road which I swear I'm connected to. There are no other boxes for a fair while.
I've seen 2 open reach vans at multiple locations throughout where I live (Chelmsford) and I have no idea what they've been doing... They just seem to sit there in the vans.
I live on Galleywood Road and I'd love to know if anyone can enlighten me about when I might expect the connection to finally arrive...
Thanks
- Ross
Razyre wrote:
I'll have a listen tomorrow, see if I can hear anything, but I don't think I can. Is on a main road, so it may be harder to hear. I certainly haven't heard any others before without trying.
Pretty sure that is my PCP box next to it, looks akin to the one on the right in this picture:
http://static.panoramio.com/photos/original/34922841.jpg
I know of some other boxes and I'll listen in to those to see if I can hear what I'm looking for, if they've even been enabled, which I'd hope since they are so much closer to town and have been there for ages, that they are.
Thanks!
- Ross
The one on the left is the Infinity one.
You want one of these in close proximity to your old cabinet(normally within 50metres).
What does the BT Wholesale Checker say about Fibre when you input your telephone number.
toekneem
http://www.no2nuisancecalls.net
(EASBF)
Similar Messages
-
I'm a new potential FCP X user. Can I buy software to load onto my imac and macbook pro or is FCP X only available as a download? I'd like to be able to edit on the road as well as at home.
Here's a short tutorial video about how to move back and forth between your base computer and the on-the-go machine. Very important info about which things can be copied within Finder and which things MUST be copied from within FCP X. Best wishes.
stephen
http://library.creativecow.net/mcauliffe_kevin/FCPX-media-on-the-go/1 -
Hi, I bought a İphone 4, it asks activation İcloud but I do not know login & password, but the box and all the codes (IMEI 013126007351651,ICCID 8999404110643086147) available. What to do?
If you bought the phone used then you will need to contact the previous owner - only the owner of an account can remove a device from their account (neither Apple, nor fellow users here on these forums, can do it) : http://support.apple.com/kb/TS4515
-
The road to Infinity. My diary.
Current Status: Order Placed
I thought I'd write a diary of my progress as I thought it may be of interest to some people. Moreover I am hoping that it will be a positive thread to have on these forums as I see so many disappointed and unhappy people posting here (although to be fair it is a help forum so negatives and issues are more common I know). Of course that assumes mine goes well
Background:
So I moved to a new property in Feb 2012, back to a town I'd lived in previously. The towns exchange was upgraded quite some time ago so I was quite pleased and looking forward to getting some "Fiber Optic Goodness". Sadly when the move was agreed I checked with the address and it was unavailable. A date of March 2013 was listed. I opted for standard Unlimited Broadband with a personalised estimate of 5.5mb (moving from 11mb, I was not impressed as we stream/game/download a lot). On the day of installation it was a pleasant suprise to be 9mb if i remember correctly. A few weeks later I changed my HomeHub for a new router to find my sync rate was now 12206 and I speedtest come in at around 10.5mb so pleased as punch.
1st Feb-->Mid March:
After reasearching FTTC I found several websites including this forum where I have learned a bit about FTTC and became interested in the process and my cabinet! Which after some tracking down I found and was pleased to see that it was a new shiny Huwaii cab. I checked availability again at it was still labelled for March 2013. having read these forums I was doubting the date as accurate and low an behold, around the 20 March the date jumped to June 2013. Further reading led me to look at my cabinet in more depth and there was a recent trench dug between the new and old cabinet, also a trench although older appeared to run towards the road. These would appear to be the power and connection stages as per this http://beusergroup.co.uk/technotes/index.php?title=Diary_of_an_FTTC_Install so my hope was raised again. Sadly nothing changed for weeks and as the cabinet is on my way new way home there had been no activity there at all.
March 20th:
On way home from work see a large BT Openreach truck at my cabinet (not excited much honest). I'm a little shy so didn't stop to ask!
March 22nd:
On way home from work see a BT Openreach van and 2 contractor vans at my cabinet installing some fancy looking equipment in the cabinet DSLAM maybe, who knows.
March 22nd-->March 31st:
Daily spam of BT Checker and Wholesale Checker, still unavailable. I have no idea why I am so obsessed with it now. I am pretty "geek" by my own admission and I love tech and how things work. I think maybe looking how FTTC/DSLAM's/xDSL all work out of interest has got be obsessed.
April 1st:
See large Openreach van with cable spool at my cabinet.
April 2nd:
See large Openreach van with cable spool at a man hole down the road from my cabinet.
April 3rd:
See large Openreach van at the a junction right at the bottom of the road with 3 fibre cables dragged into the back of the van with the doors shut (was desperate to see inside!). Assuming this is either a splitter/intercept joint or maybe an aggregation point.
April 5th:
BT Checker says its available and I order! Nearest appointment is the 18th April so say. My estimate is 41.6 / 6.5
I have maybe poorly opeted to go for Infinity 2, I know my estimate is only just above Infinity one however I am hoping that I may have a good quality line (bearing in mind my actual ADSL speed over original estimate) and therfore I have a chance of geting more. I could have opted to go for Infinity 1 and maybe upgrade later (i actually suggested this to someone in a thread ealrlier this week) but all things considered, I couldn't help myself to be honest
I will add that despite registering my interest, I have not received a call or email from BT stating that it was available. There is also no sticker on my cabinet, which is unusual for an active cabinet I believe?
So. I will update here as and when. Hopefully as I stated at the start this can be a positive FTTC/Infinity thread.
Dan.When they called I was greated with a "Mr Tucker, we are calling reference your query to us. You want to cancel your appointment, is that correct?"
"Hell no!" (didnt actually say this, but my brain did!)
It went something like this, I have abreviated though.
Him: You weant to cancel?
Me: No
Him: You want to alter your appointment?
Me: Not really, just saying if there is a cancellation I will have it.
Him: So You do want to cancel?
Me: No, I was just trying to be helpful if there was a spare slot I would take it.
Him: Ok, I can see you have a slot on the 18th
Me: Yes
Him: I can see here you already have Broadband. Is there a fault or problem?
Me: No
This goes on for at least 5mins.
Him: Let me have a word with a colleague?
Me: Ok
Him: There seems to be a problem here so I am going to try to escelate this for you sir.
Me: Ummm, ok......
Him: I will call you back on Monday?
Me: Ok....... Thanks......
Low and behold, this morning I get a text at 9:15 saying that my appointment is now the 9th at 8:00-13:00!
I guess I got what I was after, in a round abbout way. So, awsome, Infinity tomorrow! Just so happens I'm working in the morning that day but really didn't want to start messing around, it could have gone any better for me and far worse if it had gone the other way.
Quality entertainment and outcome. -
When I am first looking at my newly uploaded photos in "Library," a box appears near the bottom of the photo that says "Loading". While it is loading, I usually think the photo looks "good". After the photo is done loading, it looks more washed out. Is there some sort of setting that I might have on (or that I need to turn on) so that this does not happen. I have Lr4. Thanks.
Hi Tracy,
There used to be a way to see if poster was new to the forum.., anyway - welcome to the forum.
As I was alluding to, biggest differences in initial display are due to:
* Camera calibration profile.
* Auto-exposure/contrast settings (for which compensations have been auto-applied in camera, but not in Lightroom).
So, choose a matching camera calibration profile (whether that's an option or not depends on your camera model - they're available for many but not all models) if you prefer one of them over "Adobe Standard" (the factory default profile).
Also, your camera covers for underexposure due to non-optimal auto-exposure/contrast setting, Lightroom doesn't, so your options are:
* turn it off in camera.
* learn to compensate manually (or automatically via a plugin) in Lightroom.
Of course, in addition to preferred defaults (alt-click big "reset" button in dev module), come up with some presets which are appropriate for your druthers and type of photography.. e.g. these will compensate Nikon ADL settings:
http://www.robcole.com/LrForumSupport/ADL%20Compensations%20%282012%29.zip
Cheers,
Rob -
I am on the road and in some cases have to pay for internet privileges. I can receive mail and surf the internet with Safari. But I cannot send any mail and get the error message. The clerk at the motel here says to change the outgoing mail server to their server provider. But nothing good happens for me when I do that and restart. I tried to repair permissions and restarted several times.
The problems always seem to take place on locked WiFi. Open WiFi like Panera Bread I can access and send mail usually with no problem as well at the occasional open WiFi you run across from time to time.
G4 Powerbook & iMac 800 Mac OS X (10.4.5)
G4 Powerbook & iMac 800 Mac OS X (10.4.5)
G4 Powerbook & iMac 800 Mac OS X (10.4.5)
G4 Powerbook & iMac 800 Mac OS X (10.4.5)
G4 Powerbook & iMac 800 Mac OS X (10.4.5)
G4 Powerbook & iMac 800 Mac OS X (10.4.5)Most if not all internet service providers used for connecting to the internet now block the use of SMTP servers that are outside of their network (or not provided by the ISP) on Port 25 which is the default port used for SMTP servers.
Some ISPs allow the use of an authenticated SMTP server only that is outside of their network on Port 25 but some ISPs block its use regardless.
These restrictions are in place as part of an overall effort to prevent spam emanating from the ISP's domain and to have better control over customers that violate the ISP's terms of use in regards to sending email.
You can try changing the server port for the SMTP server from 25 to 587 and if this doesn't work, your only option is adding the ISP's SMTP server in Mail as an available SMTP server to choose from to be used to send messages with an email account not provided by that ISP. If this isn't allowed or doesn't work either, your only other option is sending messages via webmail access using a browser which doesn't use an SMTP server to send messages.
Go to Mail > Preferences > Accounts and under the Account Information tab for your email account preferences at the SMTP server selection, select the Server Settings button below. Enter 587 in place of 25 in the Server Port field and when finished, select OK to save the changed setting.
In my experience when staying at a hotel that provides free wired and/or wireless internet access, after entering the password for access provided at the front desk when checking in, I don't have problems sending messages with my .Mac account and .Mac's authenticated SMTP server which I now use as my primary personal email account. The last hotel I stayed in which was out of state happened to use the same ISP that I use at home but this was the first and only time I've come across this.
Basically it is up to the internet service provider being used to connect to the internet at the time. Some ISPs have identical restrictions in regard to using an SMTP server that is outside of their network but some are different. Since hotels/motels that provide free internet access can't expect their customers to have the same ISP and depending on the hotel/motel have business travelers that need access to sending email with their business email account using an email client such as Mail that requires using an SMTP server that is not provided by the ISP, this should be a no-brainer for the hotel and the hotel's ISP but we can thank spammers for these problems. -
Porting Keynote for ultra-portable shows on the road
I am starting this thread to discuss questions of how to leverage Keynote and iCloud to deliver presentations while on-the-road with limited access to hardware. To wit:
As you can see from the listings below, I have access to useful hardware and software. I am writing this to seek advice on how to leverage these tools to give business (and personal) presentations while I'm on-the-road and may (or may not) be carrying hardware with me. If I'm forced to travel light, I was wondering if simply taking a thumb drive and/or using my iCloud account may be enough.
I work for a small construction business that does projects in eight surrounding counties. I work as a "Producer", which means I'm both an office manager (writing up contracts and job estimates, arranging business with customers, contractors and suppliers over-the-phone) and a project manager (working with those same business contacts in-person on remote project sites). I am also applying for work outside of our business, and want to be able to use visual aids if/when necessary to illustrate what I do during an interview.
I recently started taking a Lynda.com course on "Setting Up Your Mobile Office to Work from Anywhere", and it got me to thinking about how I could use iCloud and Apple's iWork apps to create business presentations that could be played in a variety of portable scenarios. My goal is to be able to travel light and still be able to make presentations to individuals or groups.
MY CURRENT PERSONAL/BUSINESS HARDWARE & SOFTWARE
iMac 13,1 : late-2012 slimline model, 2.9 GHz Core i5 processor, 8 GB RAM, 1 TB hard disk, USB SuperDrive
MacOS X 10.8 Mountain Lion
iLife 2011 (including iPhoto 9.2.3)
iWork 2009 (including Keynote 5.3, Pages 4.3, and Numbers 2.3)
Microsoft Office 2011: Mac
Final Cut Studio 3, including Final Cut Pro 7
Adobe Photoshop Elements 8
iCloud account, free-tier service
DSL high-speed connection to internet
Have been shooting digital photos since November, 2001; manages iPhoto library of over 52,000 images
OTHER HARDWARE AVAILABLE
white MacBook 2006 vintage, 1.83 GHz Intel processor, 2 GB RAM, 160 GB hard disk, SuperDrive, MacOS 10.6.8, iLife 2011, iWork 2009, Microsoft Office 2011 (MacBook is not my machine; used by someone else in my office. This computer has battery issues; it must be plugged into AC power.)
Epson EX7200 projector, with USB thumb-drive port (for JPEG presentations), VGA port, and HDMI port.
Scenario #1: If I prepared a Keynote presentation on my iMac and transferred it via WiFi or thumb drive to the old MacBook, do I need to copy just a single Keynote file over and that's it? No attached files or folders with files in them?
Scenario #2: I have successfully, in the past, used the Epson projector and a thumb drive loaded with photos and also a USB camera card reader with an SD card attached to show simple JPEG photo slideshows. If I wanted to just use the Epson's USB port to show Keynote slideshows, they would have to be stored in folders as JPEG files. How easy is this to prepare with Keynote? Are there any pointers available on designing a useful workflow for preparing such slideshows without a lot of fuss?
Scenario #3: Forget the projector; too much bulk. If I had just a small iOS device like an iPod touch, and I wanted to plug into someone else's projector (or if I wanted to just show a slideshow of images to one person with no projector) what do I need to be prepared for, hardware-wise? What do I need to do with Keynote, both on the iMac for production and on the iOS device to make it look right?
Scenario #4: Let's say I'm going to carry everything on a USB thumb drive as a backup. What is the best way to set it up to play on someone else's hardware? (I assume three tiers of compatibility: I do network with Mac/iOS users, so Tier #1 would be Apple compatibility with Keynote. Tier #2 would be general compatibility with Microsoft Office 2003/4 for pre-XML file formats. I guess that Tier #3 would be general-purpose PDF files, or maybe the JPEG file approach with thumb drive ports on projectors.) If I'm doing Tier #1 and I'm plugging my thumb drive into someone else's MacBook, are there any pointers to avoid font conflicts or other issues? If I'm doing Tier #1 and I'm borrowing someone else's iPad to show a slideshow, how do I get the files off of a thumb drive to show on the iPad?
Scenario #5: ** iCloud ** Let's say I'm traveling VERY light, and I want to give a presentation that's stored on my Apple iCloud account. How can I organize files and folders so that Tier #1, #2 and #3 files are available (assuming I have an internet connection) so I can play a presentation off someone else's hardware, be it a tablet or laptop. Is there anything I should know about how to prepare this and how to reliably be able to log-in and access my iCloud files? Are my iWork 2009 apps going to function in preparing and saving presentation files with my iCloud account?
Scenario #6: Scenario #6 is Scenario #5, but substituting another service instead of iCloud, like maybe Google Drive. Is there any way to set up an account with files so I can reliably be able to access said files for a presentation?This is a great reminder. I too labor over my slides, sometimes way too much labor and not enough on the presentation. This is also a reminder to check out your venue BEFORE you arrive. Talk to the tech in charge if at all possible and tell him/her the system your bringing and ask if they can accommodate your requirements. I am giving 4 classes for adult continuing education at a local high school. I've had to bring my own flat screen TV because their projector was sub-par and did nothing for my slides.
Best practice if it is feasible and reasonable to go to the venue and check it out days before your presentation.
For the amount of work we put into our slides, we deserve for them to be shown at the best possible resolution.
Thanks again for the reminder. -
Using a dropdown box to change the specified value of a radio button?
I have a form that generates the body text for an email.
First there is a dropdown box in which the choices are either "red" or "blue"
Further down the page, there is a radiobutton list with 2 items "available" and "unavailable".
The specified values for these items (as defined on the binding tab) are "have blue hats" or "do not have blue hats".
This value is concatenated in the email body textfield which is to be copied by the user to an email body:
Concat("Dear", NameField, "," We ", RadioButtonList, " today. ") // Dear Persons Name, We have blue hats today.
Is there any way to change the value of the selected radio button based on the selected dropdown choice?
So if the user selected "red" in the dropdown field, the radio button values could become "have red hats" or "do not have red hats"?
Or perhaps there is a better way from the start?
Thanks!Ok, so now I've done that...
But is there a way to change that value with another field (ie when a user chooses "red" or "blue" in a dropdown box) so that the concatenated message reflects both the users choice of color and the availibility?
I'm guessing I should probably use an intermediary text box and put
InterText.rawValue = Concat ("We have ', dropdown1, " hats today") in the change event of the available radio button and:
InterText.rawValue = Concat ("We do not have ', dropdown1, " hats today") in the change event of the unavailable radio button.
then concatenate that box in the final textbox. -
End of the road for my Color Classic???
Greetings. Lifelong Mac user here who, in the wake of Jobs’ passing, retrieved my Color Classic from the attic, thinking it would surely boot right up. It worked as recently as maybe 4-5 years ago, but all attempts over the past month to successfully boot it up have been in vain. After one purchase from Radio Shack and three from eBay, I’m 99 percent done throwing any more money at it. But I’d like to see if any of you could maybe help me out before I give up the ghost. I don’t have long, since I’ll need to return the internal HD I just bought off eBay soon if I want a refund. Here’s the rundown:
** Initially, it would boot up without the startup chime, show a grey screen for a minute or two (no icons at all), then give the eight-tone chimes of death.
** Buying a new PRAM battery led to it giving the startup chime and showing the smiling Mac, but that would give way to the flashing question mark over the floppy icon. I tried resetting PRAM, which did lead to the three successive startup chimes, but still got the question mark afterward.
** Next thing I did was buy a complete set of 7.1 discs off eBay. Using either the Disk Tools disc or the Install Me First disc, I would get the startup chime and smiling Mac, but then I couldn’t get past this message: “This startup disk will not work with this Macintosh. Use the latest installer to update this disk for this model.” For some reason, the mouse wouldn’t work when doing this, so I’d have to power off with the main switch and then eject the floppy with a paper clip. I would later learn that these discs apparently wouldn’t work on the CC because of a missing System Enabler.
** Next step: buying 7.6 Disk Tools discs off eBay. This time, the startup chime and happy Mac gave way to a sad Mac icon, a "0000000F / 00000066" error message and four-tone chimes of death. That led me to believe my factory HD was bad, sooooo …
** I bought an internal HD off eBay with 7.5 already installed on it. I had high hopes that this would finally do the trick. The heavens would open up and I would see the desktop. But ... after the swap, I was greeted once again with the flashing question mark. I disconnected and reattached the data and power cables to the HD three times, but to no avail. I tried booting off the 7.6 Disk Tools with this new HD, but got the sad Mac / "0000000F / 00000066" sequence once more. I tried booting off the 7.6 Disk Tools with no HD attached and got the same thing. This was the most depressing night of all.
** Today, with the new HD installed, I tried booting off of old 7.0.1 and 7.1 startup floppies my dad made back in the day -- and one or both of them actually progresses past the smiling Mac to the "Welcome to Macintosh" screen. But then, the "use the latest installer" screen takes over.
So this is where things stand. I'm holding out hope that I can having a working CC without spending any more money, but I'm not optimistic. Tonight I might trying washing the logic board in the dishwasher, as well as booting with the logic board disconnected and then pushing it in shortly after the startup chime (which I had tried with the factory HD without success).
Any thoughts? Ideas? Or should I call it a day, put it back on the side mantle in my living room, and go the Macquarium (or MacAntFarm) route down the road? Thanks in advance for your help!The Color Classic is pretty straight forward to work on because the motherboard is just a matter of pulling it out.
But I don't think it's a bad motherboard so that is the good news. Sounds like the original hard drive died but before you toss it try seeing if it is just a matter of the heads being stuck. Take it in hand and gently swish it back and forth a few times to see if it that will unstick the heads. If you had a clean room I would say open the drive and gently turn the platters than zip it back up and see if it will work.
The "new' hard drive you bought sounds like it is pooched as those clicking sounds are usually an indication of a bad drive so return it ASAP for a working one or a refund. But just in case if you look at your old hard drive does it have terminators on it, they will look like two long black strips with multiple prongs attaching them to the motherboard of the hard drive. Now look at the new one, does it have any or a place for them? Though my memory is foggy on SCSI drives but that 700 might have a jumper instead but that could be wrong.
In terms of the OS, you can run System 8 on it. But you must buy the Apple release version for all Macs which comes with a floppy disk to boot your CC as well as a CD with the system SW on it. The CD is white but you will need a SCSI CD drive to install the sw. The error messages tell me that those disks are the wrong ones and not something wrong with your CC.
Now if you were into experimenting..... the following motherboards from other compact Macs will work in your CC.
The motherboard from the LC 525 is a straight swap in and even the ports on the board mate up with the holes on the rear cover. The LC 550 as well, which was actually the motherboard that the CC II used.
The motherboard from the LC 575 will also work and that adds a 68040 cpu into the mix plus the upgrade to 72 pin simms which allows you to add up to 128mb of ram with a modification to the case of the CC. The two other boards I mentioned also take 72 pin simms so you can bump up your CC from 10mb to 32mb.
I wrote a short page on my experiments here, http://www.kevinomura.com/macs/colorclassic/index.html .
In any event I think it's just your hard drive that is the problem since your video sounds good, don't toss that CC as there are still collectors out there looking for them.
On other thought, since the hard drive is on a caddy with a zif socket it's possible that some of the pins have a bit of corrosion on them. Check the one's on the hard drive side and see if they look clean, if not clean them. on the computer side that will be tougher since it's deep in the case but a few insertions of the drive might be enough to knock some of the corrosion off and make a better contact. -
Note messages at the time of availability check in sales order entry form
Hello Friends,
Im getting the following note messages at the time of availability check in the sales order entry form.
ATP Process resulted in no data
User defined exception in package OE_SCHEDULE_UTIL Procedure Load_Results_from_rec
User defined exception in package OE_SCHEDULE_UTIL Procedure Load_Results_from_tbl
After this when we book the order, the order line status becomes 'Booked' and does not change to 'Awaiting Shipping'
As a result of which im not able to proceed ahead with the rest of the order to cash cycle.
Can somebody please guide me in resolving this error.
We don't intend to use ATP as the client's business process is such that they maintain adequate inventory balances.
Regards
Anil WadhwaHi Anil
Are you using a RAC DB configuration? Please check if this is true, there are special setup steps that are required to be performed in case of RAC DB configuration and this issue usually occurs if such configuration is missing specifically if its happening randomly for some ATP requests.
You can find actual steps to be performed on metalink.
Thanks
Navneet Goel -
Sending Mail whilst on the Road
Hi All,
Can't seem to send out mail whilst away from home on the road. I am still receiving email OK but trying to send anything out gets a response.
"This message could not be delivered and will remain in your Outbox until it can be delivered. The connection to the server "smtp.wanadoo.co.uk" on port 25 timed out."
this only happens whilst i'm out of the house. have tried altering ports to those others mentioned in this forum but to no avail.
Can anybody help me please?
Thanks
Paulo
1.33GHz Powerbook G4 Mac OS X (10.4.2)When traveling and connected to the internet with a different ISP that is not the same ISP used when connected to the internet at home, it depends on the ISP's requirement when using an SMTP server not provided by the ISP.
If the SMTP server used when connected to the internet at home is authenticated, sometimes changing the authentication to None for the SMTP server is all that is required and then switching back to authentication for the SMTP server when returning home.
When connected to the internet at a Hotel or via any paid or free internet access point, you need to check with the Hotel front desk or with their ISP regarding their restrictions when using an SMTP server not provided by the ISP. For some internet providers, it may require setting up and using their SMTP server to send messages with your email account or accounts. -
How to get the standard texts available in a smartforms
Hi Experts,
How can we find out the standard texts that are exist in a particular smartform . is there any table/function module available to get those standard texts? I am finding the table STXFTXT, from that I am getting only textline. But I need the standard text names that are used in a smartform.
Thanks & Regards,
Sureshhi,
1,Use SO10 Tcode to write standard text in Smartform.
2.For long text
method1
Create TEXT node- general attributes change text type to include text
then you can input text name/text object/text id/language
method2
create PROGRAM LINE node - use FM READ_TEXT to read it to a internal table
then use LOOP or TABLE node to display it
For TEXT module(For foreign language)
Tr-code:smartforms -- choose Text module(not choose form)--create a text module object
then enter smartform Create TEXT node- general attributes change text type to text module
input the text module name which created by above
3.
1. take function module name of the smartform.
2. goto se37 and type that fm name.
3. goto attributes tab
4. double click on either program or include .
5. There u can find all the subroutines used inside smartform.
6. search for "perform %move using %textkey-name".
4.Standard Texts are created in SO10 Tcode and stored in STXH table with OBject ,ID and NAME parameters. We can use Read_Text FM to read the text.
check the tables STXH & STXL.
5.
How to CAll Standard Text in Smart Forms
In SFs you can insert the standard tests using the TEXT node. Create a TEXT NODE. Then in the GENERAL ATTRIBUTES of this TEXT node select INCLUDE TEXT in the TYPE option. Then you have to enter the text name, object , ID and language in the provided fields. Then if you dont want any error if there is no text in the corresponding text then CHECK the check box "No errors if no text available. -
I want to exchange all my equipment for the newest model available.
I've been a steady customer since Feb. 2008. I want to exchange all of my equipment for the latest model available. How do I go about that?
It's my understanding that I'm a grandfathered "original" customer, whatever that means. My answers might be different from what you'll get.
If you have Motorola 1200, 1215 (DVR) or 1225 (DVR) boxes, I agree. These boxes are obsolete and slow. They'll still get updates, but it's like trying to run Windows 8.1 on something that was purchased with Windows XP on it... it may work, but it'll take a long time to do a very simple task. A few years ago, when the update was pushed out to AT&T boxes that introduced the spinning circle in the lower right corner and "poster view" for movies, those boxes I mentioned basically started running very slowly.
It's my understanding those boxes are obsolete and are being junked when they're returned to AT&T.
AT&T has two types of modern non-DVR boxes... wireless and wired. I had a tech come out and he was able to waive the $49 fee to get one wireless box. If you call AT&T and let them know your boxes "broke" because of an update they pushed out, and if you're nice and polite, you should be able to get them to waive the $49 fee... actually, you may have to pay it, but your next bill will get a $49 credit...that's what they did in my case.
I don't think that was 100% free as my taxes and fees were *a bit* higher on one bill and I don't know if they were that much lower on the next bill...but whatever.
When I added a second wireless box, I had it shipped via UPS and installed it myself. I was able to get them to credit the $49 fee off the next bill. Once again, I paid $49 on one bill and my next bill had the $49 credit.
Now...if you want the newer wired boxes, there shouldn't be any sort of fee. Like I said before, it was AT&T that pushed out newer software. IMO, a customer shouldn't pay when AT&T's update "breaks" a customer's equipment.
As for the DVR, yes, you will lose recordings. What you *can* do is either buy a Slingbox and put the DVR and Slingbox by theirselves or just put the DVR on a TV you don't watch a whole lot.
My silver remotes still work absolutely fine. If you want a newer "basic" remote, keep in mind that some buttons have changed. Those should be free, at least they are when mine stop working and I know for a fact they have new batteries. -
Dynamic population of second list box based on the selection of first list
Hai Friends,
I have the code like this.
Here my issue is: when the user accesses this page he will get the topic and related categories in the drop down boxes. but when the user changes the topic it needs to populate the categories from the database and kept the topic same for the respective categories. so how can i do this?
<form name="questionForm" method="post" action="listQuestions.lgs">
<table bgcolor="F8D8D8" cellspacing="2" cellpadding="2" align="center"
style="margin-top: 100px">
<tr>
<td>Topics:</td>
<td><select name="topic">
<c:forEach items="${model.topics}" var="topic">
<option value="<c:out value="${topic.topicId}" />"><c:out
value="${topic.topicName}" /></option>
</c:forEach>
</select></td>
<td>Categories:</td>
<td><select name="category">
<c:forEach items="${model.categories}" var="category">
<option value="<c:out value="${category.categoryId}" />"><c:out
value="${category.categoryName}" /></option>
</c:forEach>
</select></td>
<tr>
<td><a
href="addQuestion.lgs?categoryId=2<c:out value="${category.categoryId}"/>">Add
New Question</a></td>
<td></td>
<td></td>
<td></td>
</tr>
<tr>
<td>Questions under this Category:</td>
<td><c:if test="${model.questions} == null">
<c:out value="no questions found" />
<br>
</c:if> <c:if test="${model.questions} != null">
<c:forEach items="${model.questions}" var="question">
<table>
<tr>
<c:out value="${question.questionDesc}" />
</tr>
</table>
</c:forEach>
</c:if></td>
</tr>
<tr>
<td colspan="2"><input type="submit" /></td>
</tr>
</table>
</form>
regards,
phani.Hi Rahul,
I followed the link what you have mentioned and i need clarification in regarding this....
function getResponseAction(){
// Verifying State & Status
if(verifyReadyState(xmlhttp) == true){
// Building a DOM parser from Response Object
var response = xmlhttp.responseXML.documentElement
// Deleting all the Present Elements in the Drop-Down Box
drRemove()
// Checking for the Root Node Tag
var x = response.getElementsByTagName("option")
var val;
var tex;
var optn;
for(var i = 0;i < x.length; i++){
optn = document.createElement("OPTION")
var er
// Checking for the tag which holds the value of the Drop-Down combo element
val = x.getElementsByTagName("val")
try{
// Assigning the value to a Drop-Down Set Element
optn.value = val[0].firstChild.data
} catch(er){
// Checking for the tag which holds the Text of the Drop-Down combo element
tex = x[i].getElementsByTagName("text")
try{
// Assigning the Text to a Drop-Down Set Element
optn.text = tex[0].firstChild.data
} catch(er){
// Adding the Set Element to the Drop-Down
document.questionForm.category.options.add(optn)
but in my springframe work i have the controller like this where i am putting category object in the context and i am retrieving this in my listQuestions.jsp like this
<tr>
<td>Topics:</td>
<td><select name="topic" onchange="populateCombo(this.value)">
<c:forEach items="${model.topics}" var="topic">
<option value="<c:out value="${topic.topicId}" />"><c:out
value="${topic.topicName}" /></option>
</c:forEach>
</select></td>
<td>Categories:</td>
<td><select name="category">
<c:forEach items="${model.categories}" var="category">
<option value="<c:out value="${category.categoryId}" />"><c:out
value="${category.categoryName}" /></option>
</c:forEach>
</select></td>
<tr>
package com.lgsglobal.lgsexam.spring.controllers;
import java.util.HashMap;
import java.util.List;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
import org.springframework.web.servlet.ModelAndView;
import org.springframework.web.servlet.mvc.Controller;
import com.lgsglobal.lgsexam.dao.CategoryDAO;
import com.lgsglobal.lgsexam.dao.QuestionDAO;
import com.lgsglobal.lgsexam.dao.TopicDAO;
import com.lgsglobal.lgsexam.hibernate.pojos.Category;
import com.lgsglobal.lgsexam.hibernate.pojos.Topic;
public class ListQuestionsController implements Controller {
private TopicDAO topicDAO = null;
public void setTopicDAO(TopicDAO topicDAO) {
this.topicDAO = topicDAO;
public TopicDAO getTopicDAO() {
return this.topicDAO;
private QuestionDAO questionDAO = null;
public void setQuestionDAO(QuestionDAO questionDAO) {
this.questionDAO = questionDAO;
public QuestionDAO getQuestionDAO() {
return this.questionDAO;
private CategoryDAO categoryDAO = null;
public void setCategoryDAO(CategoryDAO categoryDAO) {
this.categoryDAO = categoryDAO;
public CategoryDAO getCategoryDAO() {
return this.categoryDAO;
public ModelAndView handleRequest(HttpServletRequest request,
HttpServletResponse response) throws Exception {
HashMap mymodel = new HashMap();
List topics = topicDAO.getTopics();
mymodel.put("topics", topics);
if (request.getParameter("topic") != null) {
System.out.println("in topics condition to retrieve questions");
int topicId = Integer.parseInt(request.getParameter("topic"));
Topic topic = topicDAO.getTopic(topicId);
List categories = categoryDAO.getCategories(topic);
mymodel.put("categories", categories);
System.out.println("exiting topics condition to retrieve questions");
if (request.getParameter("category")!= null) {
System.out.println("in category condition to retrieve questions");
int categoryId = Integer.parseInt(request.getParameter("category"));
Category category = categoryDAO.getCategory(categoryId);
List questions = questionDAO.getQuestions(category);
mymodel.put("questions", questions);
return new ModelAndView("listQuestions", "model", mymodel);
so here my issue is like how i can populate categories in the category(dependent combo). so please let me know the solution.
awaiting for reply. for any furthere info please let me know....
regards,
Phani.K -
Recently rented a film and bought an album on iTunes. The items appear in my purchased items and in my download items however they have a download error tap to retry. When I retry I box appears quoting name of item and unable to download at this time. What do I need to check? I have had no problems downloading before and my Internet signal is strong. Help please!!
For the rental:
Select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History on your computer.
For the music:
Try deleting the problematic tune (electing to remove original file if/when prompted) and then re-downloading the file from the iTunes store.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option from the Quick Links section in the top right corner of the iTunes homepage in your iTunes application on your computer.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option at the bottom of the screen of the iTunes app on your iOS device.
If the problem re-occurs, select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History using your computer.
Maybe you are looking for
-
Can I open multiple copies of the same book?
I am reading a more technical book. It would be helpful to have multiple pages opened at the same time (for the purpose of reference) Is it possible to open more than one copy of the same book? I know that I can open the book on my iPad or iPhone, bu
-
"SYST: Period 012 is not valid in financial year variant Z4"
Hi Iam getting this error "SYST: Period 012 is not valid in financial year variant Z4" in Asset accounting when using the shortend fiscal yr with 9 periods in 2010. Generated the period control OA84 for this variant Z4 but still getting the error.
-
Photoshop CS3 Extended "Not Responding" after selecting horizontal type tool.
Hello, When I start my PhotoShop CS3 Extended v10.0 and load up a jpg and then zoom in and go select the horizontal type tool and click on my jpg, PS just freezes and then I click the main screen and then it tells me infinetly that it has "Stop Respo
-
How to detect mobile phone number???
Hi, Is there a way to get phone number somehow? well what i m trying to do is, connect a web site from mobile and fill some fields (may be send picture to this page). While connected to this page, i want to detect and keep this mobile's number. Any s
-
Can someone tell me what to o with this problem?